SMP1304-011LF [SKYWORKS]
Pin Diode, Silicon, GREEN, PLASTIC PACKAGE-2;型号: | SMP1304-011LF |
厂家: | SKYWORKS SOLUTIONS INC. |
描述: | Pin Diode, Silicon, GREEN, PLASTIC PACKAGE-2 衰减器 光电二极管 |
文件: | 总10页 (文件大小:904K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
SMP1304 Series: Low-Distortion Attenuator Plastic
Packaged PIN Diodes
Applications
• TV distribution
• Attenuator circuits
Features
• Low-distortion design
• Frequency range from 5 MHz to >2 GHz
• Designed for base station applications
• Configured for PI and TEE attenuators
• Packages rated MSL1 @ 260 °C per JEDEC J-STD-020
Description
The SMP1304 series of plastic packaged, surface mountable, low
capacitance (0.3 pF) silicon PIN diodes is designed for attenuator
applications from 5 MHz to beyond 2 GHz.
The thick 100 μm I region of these PIN diodes makes them very
attractive for use in low-distortion PI and TEE attenuators
commonly found in TV distribution applications.
The 1 μs typical carrier lifetime of these diodes results in a
resistance of 20 Ω maximum at 1 mA and 7 Ω maximum at
10 mA.
The SMP1304 series is available in a selection of plastic
packages: as a single diode in small footprint SOD-323 and SC-79
packages, and in a variety of configurations in an SOT-23
package, including the low inductance (0.4 nH) SMP1304-007.
The SMP1304-019, a three-diode junction designed for insertion
in PI attenuators, is available in an SOT-143 package. The
SMP1304-027 is available in an SOT-5 package as a four-diode
array designed for insertion in commonly used four-diode PI
attenuator circuits.
Table 1 describes the various packages and marking of the
SMP1304 series.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200044M • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 17, 2011
1
DATA SHEET • SMP1304 SERIES
Table 1. SMP1304 Series Packaging and Marking
Common
Cathode
Reverse Series
Pair
Low
Inductance
Single
Series Pair
Single
PI
PI
Single
SOD-323
Green™
SC-79
Green™
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-143
SOT-5
SMP1304-001
SMP1304-004
SMP1304-005
SMP1304-007
SMP1304-019
SMP1304-027
Marking: PG1
Marking: PG3
Marking: PG2
Marking: PGB
Marking: PGJ
Marking: PGM
SMP1304-
001LF
Green™
SMP1304-
004LF
Green™
SMP1304-
005LF
Green™
SMP1304-
006LF
Green™
SMP1304-
007LF
Green™
SMP1304-
027LF
Green™
SMP1304-
079LF
Marking:
Cathode
♦SMP1304
-011LF
Marking: RG
SMP1304-
019LF
Marking: RGJ
Marking: RG1
Marking:RG3
Marking: RG2
Marking: RG8
Marking: RGB
Marking: RGM
LS = 1.5 nH
LS = 1.5 nH
LS = 1.5 nH
LS = 1.5 nH
LS = 1.4 nH
LS = 1.5 nH
LS = 1.5 nH
LS = 1.5 nH
LS = 0.7 nH
The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green™. Tin/lead
(Sn/Pb) packaging is not recommended for new designs.
Innovation to Go™
Select Linear Products (indicated by ♦) now available for purchase online.
insertion in PI attenuator circuits in common use from 10 MHz to
>1 GHz. The SMP1304-019 PIN diode junction was designed for
low capacitance, a wide resistance dynamic range, and low
distortion performance.
SMP1304-007
The inductance of the SMP1304-007 is effectively reduced to
0.4 nH compared to the 1.5 nH of the standard configuration. The
lower inductance is particularly beneficial when the diodes are
used as shunt-connected switches at frequencies >500 MHz
where inductance is the primary limitation on maximum switch
isolation.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SMP1304 series are
provided in Table 2. Electrical specifications are provided in
Table 3. Resistance versus temperature measurements are
provided in Table 4.
To achieve the effective 0.4 nH, the SMP1304-007 must be
inserted in the microstrip circuit board with a gap in the trace as
shown in Figure 1. Because of the polarity of the diode junction,
the low inductance can only be achieved with the cathode
connected to ground.
Typical performance characteristics of the SMP1304 series are
illustrated in Figures 3 to 6. Package dimensions are shown in
Figures 7 to 15 (odd numbers), and tape and reel dimensions are
provided in Figures 8 to 16 (even numbers).
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
Figure 1. SOT-23 Package Trace Gap
The SMP1304 series is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Figure 2. SMP1304-019 Package (PI)
SMP1304-019 PI Attenuator PIN Diodes
The SMP1304-019 uses three PIN diode junctions in an SOT-143
package (see Figure 2). The junctions are configured for ease of
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 17, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200044M
2
DATA SHEET • SMP1304 SERIES
Table 2. SMP1304 Series Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
V
Reverse voltage
VR
200
250
Power dissipation @ 25 °C lead temperature
Storage temperature
PD
mW
°C
TSTG
TA
–65
–65
+150
+150
Operating temperature
°C
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The
SMP1304 series PIN diodes are Class 1C ESD devices.
Table 3. SMP1304 Series Electrical Specifications (Note 1)
(TA = +25 °C, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
VR = 200 V
Typical
Max
10
Units
μA
Reverse Current
IR
Capacitance (Note 2)
Resistance
CT
RS
f = 1 MHz, V = 30 V
f = 100 MHz
0.3
pF
I = 1 mA
I = 10 mA
I = 100 mA
40
50
7
2
Ω
Ω
Ω
Forward voltage
Carrier lifetime
I region width
VF
Tl
IF = 10 mA
IF = 10 mA
0.8
1
V
μs
μm
100
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Note 2: The SMP1304-019 and SMP1304-027 maximum capacitance is 0.45 pF.
Table 4. Resistance vs Temperature @ 100 MHz
I
R
S
@ –55 °C
(Ω)
R
S
@ –15 °C
(Ω)
R
S
@ +25 °C
(Ω)
R
S
@ +65 °C
(Ω)
R
S
@ +100 °C
(Ω)
F
(mA)
0.02
0.10
0.30
1.0
1590
315
108
34.5
4.8
1660
340
118
37.9
5.3
1752
367
128
41.6
5.8
`1770
396
141
46.3
6.6
1760
409
147
48.8
7.0
10
20
3.0
3.3
3.6
4.1
4.3
100
1.3
1.4
1.5
1.7
1.8
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200044M • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 17, 2011
3
DATA SHEET • SMP1304 SERIES
Typical Performance Characteristics
Figure 3. Series Resistance vs Current @ 100 MHz
Figure 4. DC Characteristic
Figure 6. Conductance vs Frequency and Reverse Voltage
Figure 5. Capacitance vs Reverse Voltage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 17, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200044M
4
DATA SHEET • SMP1304 SERIES
Figure 7. SC-79 Package Dimension Drawing
Figure 8. SC-79 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200044M • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 17, 2011
5
DATA SHEET • SMP1304 SERIES
Figure 9. SOD-323 Package Dimension Drawing
Figure 10. SOD-323 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 17, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200044M
6
DATA SHEET • SMP1304 SERIES
Figure 11. SOT-5 Package Dimension Drawing
Figure 12. SOT-5 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200044M • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 17, 2011
7
DATA SHEET • SMP1304 SERIES
Figure 13. SOT-23 Package Dimension Drawing
Figure 14. SOT-23 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
May 17, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200044M
8
DATA SHEET • SMP1304 SERIES
Figure 15. SOT-143 Package Dimension Drawing
Figure 16. SOT-143 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200044M • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 17, 2011
9
DATA SHEET • SMP1304 SERIES
Copyright © 2002-2007, 2009, 2010, 2011 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10
May 17, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200044M
相关型号:
©2020 ICPDF网 联系我们和版权申明