SMP1304-087LF [SKYWORKS]
Pin Diode,;
| 型号： | SMP1304-087LF |
| 厂家： | 
SKYWORKS SOLUTIONS INC. |
| 描述： | Pin Diode, 二极管 |
| 文件： | 总7页 (文件大小：306K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PRELIMINARY DATA SHEET
SMP1304-087LF: Surface Mount PIN Diode
Applications
• Los loss, high power switches
• Low distortion attenuators
Features
• Low-series resistance: 2.0 Ω maximum @ 100 mA
• Low total capacitance: 0.3 pF maximum @ 30 V
• QFN (2 x 2 mm) package (MSL1, 260 °C per JEDEC J-STD-020)
Description
The SMP1304-087LF is a surface mountable PIN diode suitable
for use in an RF switch or attenuator circuit.
Maximum resistance at 100 mA is 2.0 Ω and maximum
capacitance at 30 V is 0.3 pF. The combination of low
capacitance, low parasitic inductance, and nominal 100 μm I-
region width, makes the SMP1304-087LF useful in large signal
switches and attenuator applications.
The device has a 1 W dissipation power rating, which makes it
capable of handling up to 25 W @ 25 °C Continuous Wave (CW) in
a series-connected transmit/receive (T/R) switch.
Design information for high power switches may be found in the
Skyworks Application Note, Design With PIN Diodes (document
number 200312).
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201967B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 13, 2013
1
PRELIMINARY DATA SHEET • SMP1304-087LF SURFACE MOUNT PIN DIODE
Table 1. SMP1304-087LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
200
Units
mA
V
Forward current
IF
Reverse voltage
VR
PD
TA
TSTG
TJ
200
Dissipated power @ 85 °C
Operating temperature
Storage temperature
Junction temperature
1
W
–55
–55
–55
+85
°C
+200
+175
°C
°C
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 2. SMP1304-087LF Electrical Specifications (Note 1)
(TA = +25 °C, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
IF = 10 mA
Min
Typical
Max
Units
V
Forward voltage
VF
0.80
Reverse leakage current
Series resistance
IR
VR = 200 V
10
50.00
7.00
2.00
0.3
μA
Ω
RS1
RS10
RS100
CT30
LS
IF = 1 mA, f = 100 MHz
IF = 10 mA, f = 100 MHz
IF = 100 mA, f = 100 MHz
VR = 30 V, f = 1 MHz
40.00
5.50
1.22
0.2
Ω
Ω
Total capacitance
pF
Series inductance
0.65
1
nH
μs
Minority carrier lifetime
I region width
TL
IF = 10 mA
W
100
112
μm
°C/W
Thermal resistance (Note 2)
ΘJC
CW
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Note 2: Assume a thermal resistance of 90 °C/W for the junction-to-bottom of the circuit board.
Electrical and Mechanical Specifications
Package and Handling Information
The absolute maximum ratings of the SMP1304-087LF are
provided in Table 1. Electrical specifications are provided in
Table 2.
Instructions on the shipping container label regarding exposure
to moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
Typical performance characteristics of the SMP1304-087LF are
illustrated in Figures 1, 2, and 3.
The SMP1304-087LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application
Note, Solder Reflow Information, document number 200164.
Package Dimensions
The PCB layout footprint for the SMP1304-087LF is provided in
Figure 4. Typical case markings are shown in Figure 5. Package
dimensions for the SMP1304-087LF are provided in Figure 6,
and tape and reel dimensions are provided in Figure 7.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
June 13, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201967B
PRELIMINARY DATA SHEET • SMP1304-087LF SURFACE MOUNT PIN DIODE
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201967B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 13, 2013
3
PRELIMINARY DATA SHEET • SMP1304-087LF SURFACE MOUNT PIN DIODE
Typical Performance Characteristics
(TA = 25 °C, Unless Otherwise Noted)
Figure 2. Series Resistance vs Forward Current @ 100 MHz
Figure 1. Capacitance vs Reverse Voltage @ 1 MHz
Figure 3. Forward Voltage vs Forward Current
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
June 13, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201967B
PRELIMINARY DATA SHEET • SMP1304-087LF SURFACE MOUNT PIN DIODE
Figure 4. SMP1304-087LF PCB Layout Footprint
(Top View)
Figure 5. Typical Case Markings
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201967B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 13, 2013
5
PRELIMINARY DATA SHEET • SMP1304-087LF SURFACE MOUNT PIN DIODE
Figure 6. SMP1304-087LF Package Dimensions
Figure 7. SMP1304-087LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
June 13, 2013 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201967B
PRELIMINARY DATA SHEET • SMP1304-087LF SURFACE MOUNT PIN DIODE
Ordering Information
Model Name
Manufacturing Part Number
SMP1304-087LF Surface Mount PIN Diode
SMP1304-087LF
Copyright © 2012, 2013 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201967B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 13, 2013
7
相关型号：
SMP1304-108
Pin Diode, 200V V(BR), Silicon, 1.83 X 1.43 MM, 1 MM HEIGHT, GREEN, HERMETIC SEALED, CERAMIC PACKAGE-2
SKYWORKS
©2020 ICPDF网 联系我们和版权申明