LQ057Q3DG02 [SHARP]
Display,;
| 型号： | LQ057Q3DG02 |
| 厂家： | 
SHARP ELECTRIONIC COMPONENTS |
| 描述： | Display, |
| 文件： | 总20页 (文件大小：542K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technical Document
LCD Specification
LCD Group
LQ057Q3DG02 LCD Module
Product Specification
June 2009
QVGA module with 400 nits brightness and
550:1 contrast. An LED backlight along with
high-purity color filters give excellent color
reproduction. Module carries Sharp’s
Strong 2 Rating for temperature, shock
tolerance, and brightness and contrast.
Non-touch-panel version
of LQ057Q3DG01.
Full Specifications Listing
LD-21605A－1
NOTICE
This publication is the proprietary of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no
part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical for any
purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also
required before any use of this publication may be made by a third party.
The application circuit examples in this publication are provided to explain the representative applications of SHARP's
devices and are not intended to guarantee any circuit design or permit any industrial property right or other rights to be
executed. SHARP takes no responsibility for any problems related to any industrial property right or a third party
resulting from the use of SHARP's devices, except for those resulting directly from device manufacturing processes.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in
equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the
latest device specification sheets before using any SHARP's device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structures and other
contents described herein at any time without notice in order to improve design or reliability. Contact SHARP in order to
obtain the latest specification sheets before using any SHARP's device. Manufacturing locations are also subject to
change without notice.
Observe the following points when using any device in this publication. SHARP takes no responsibility for damage
caused by improper use of the devices.
The devices in this publication are designed for general electronic equipment use.
The appropriate design measures should be taken to ensure reliability and safety when SHARP's devices are used for
equipment such as:
・Transportation control and safety equipment(i.e.,aircraft, trains, automobiles, etc.)
・Traffic signals・Gas leakage sensor breakers ・Alarm equipment・Various safety devices etc.
SHARP's devices shall not be used for equipment that requires extremely high level of reliability, such as:
・Military and space applications
・Nuclear power control equipment
・Medical equipment for life support
Contact a SHARP representative, in advance, when intending to use SHARP’s devices for any “specific” applications
other than those recommended by SHARP.
Contact and consult with a SHARP representative if there are any questions about the contents of this publication.
LD-21605A－2
1. Application
This specification applies to color TFT-LCD module, LQ057Q3DG02.
2. Summary and Features
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is
composed of a color TFT-LCD panel, driver ICs, control circuit (PWB), FPC, front and back polarizer, sealed case,
backlight unit. Graphics and texts can be displayed on a 320×RGB×240 dots panel with 262,144 colors by suitable
control supplying from the outside.
It isn’t composed LED drive circuit for a backlight drive.
・ Wide Viewing Angle technology is adopted.
(The most suitable viewing angle is in the 12 o'clock direction.)
・ By adopting an active matrix drive, a picture with high contrast is realized.
・ Reflection due to external light is minimized through the use of a low reflection black matrix .
・ A thin, light and compact module is accomplished through the use of COG mounting technology.
・ Through the use of high color purity color filter and TN-normally white mode excelled in color
reproducibility, an image with highly natural color reproduction is realized.
・ High viewing angle and high brightness.
・ An inverted video display in the vertical / horizontal directions is possible.
・ This module is adapted to RoHS compliance.
3. Mechanical specifications
table 3-1
Parameter
Specifications
14.4 (5.7 inch) diagonal
115.2 (H) × 86.4 (V)
320(H)×240(V)
Units
cm
mm
Screen size
Active area
Display format
pixels
(1 pixel = R + G + B dots)
0.360 (H) × 0.360 (Ｖ)
R,G,B Stripe configuration
Normally white
Dot pitch
mm
Pixel configuration
Display mode
mm
g
Outline dimension【Note1-1】
Mass
144.0 (W)×104.6 (H)×12.3(D)
210 (MAX)
【Note 1-1】
A FPC of LED and some projections are excluded.
A figure of outline dimension is shown in Fig. 1.
LD-21605A－3
４. Input terminal
4-1. TFT-LCD panel driving part
CN1
Used connector: IMSA-9637S-33Y902 (IRISO ELECTRONICS CO.,LTD.)
Table 4-1
Functional table of CN1 terminals
Pin No. Symbol
Description
Polarity
GND
ground
１
CK
Hsync
Vsync
GND
R0
Clock signal for sampling each data signal
Horizontal synchronous signal
Vertical synchronous signal
ground
２
Negative
Negative
３
４
５
RED data signal(LSB)
RED data signal
６
R1
７
R2
RED data signal
８
R3
RED data signal
９
R4
RED data signal
１０
１１
１２
１３
１４
１５
１６
１７
１８
１９
２０
２１
２２
２３
２４
２５
２６
２７
２８
２９
３０
R5
RED data signal(MSB)
ground
GND
G0
GREEN data signal(LSB)
GREEN data signal
GREEN data signal
GREEN data signal
GREEN data signal
GREEN data signal(MSB)
ground
G1
G2
G3
G4
G5
GND
B0
BLUE data signal(LSB)
BLUE data signal
B1
B2
BLUE data signal
B3
BLUE data signal
B4
BLUE data signal
B5
BLUE data signal(MSB)
ground
GND
ENAB
Vcc
Vcc
R/L
Positive
Signal to settle the horizontal display position【Note4-1】
+3.3V power supply
+3.3V power supply
Selection signal for horizontal scanning direction【Note4-2】
(“L” : Normally , “H” : Right-and-Left reversal)
Selection signal for vertical scanning direction【Note4-2】
(“H” : Normally , “L” : Up-and-Down reversal)
ground
U/D
３１
GND
GND
３２
３３
ground
LD-21605A－4
【Note 4-1】The horizontal display start timing is settled in accordance with a rising timing of ENAB signal. Don’t keep
ENAB “Low” during operation.
【Note 4-2】
R/L = L，U/D = H
R/L = H，U/D = H
R/L = L，U/D = L
R/L = H，U/D = L
4-2.
LED Backlight driving part (FPC1)
Table 4-2
Pin No.
Functional table of FPC terminals
Symbol
LED-A1
LED-C1
LED-A2
LED-C2
LED-A3
LED-C3
LED-A4
LED-C4
Description
Power Supply for LED (Anode)
Power Supply for LED (Cathode)
Power Supply for LED (Anode)
Power Supply for LED (Cathode)
Power Supply for LED (Anode)
Power Supply for LED (Cathode)
Power Supply for LED (Anode)
Power Supply for LED (Cathode)
１
２
３
４
５
６
７
８
Suitable connector ：IMSA-9632S-08-AGF
LD-21605A－5
5. Absolute maximum ratings
Table 5-1
Item
Conditions
Rated value
-0.3 ~ VCC +0.3
-0.3 ~ +4.0
-30 ~ +70
Symbol
VI
Unit
V
Remarks
【Note 5-1】
Input voltage
Ta = 25°C
VCC
Ta = 25°C
Power supply voltage
Temperature for storage
Temperature for operation
V
Tstg
Topr
-
-
【Note 5-2,3】
°C
°C
-30 ~ +70
【Note 5-2,3,4】
【Note 5-1】
【Note 5-2】
【Note 5-3】
CK, R0～R5, G0～G5, B0～B5, Hsync, Vsync, ENAB, R/L, U/D
This rating applies to all parts of the module and should not be exceeded.
Maximum wet-bulb temperature is less than 39℃. Condensation of dew must be avoided as
electrical current leaks will occur, causing a degradation of performance specifications.
The operating temperature only guarantees operation of the circuit. For contrast, speed response,
and other factors related to display quality, judgment is done using the ambient temperature
Ta =+25℃.
【Note 5-4】
LD-21605A－6
6. Electrical characteristics
6-1. TFT-LCD panel driving section
Table 6-1
Parameter
Ta=25℃
Symbol
Vcc
Icc
Min.
+3.0
－
Typ.
+3.3
20
Max.
+3.6
30
Unit
V
Remarks
【Note 6-1】
【Note 6-2】
+3.3V
Supply voltage
power suply
Current dissipation
mA
Permissive input ripple
Input Low voltage
VRF
VIL
100
mVp-p Vcc=+3.3V
V
－
－
0
0.1Vcc
Vcc
1
－
Input High voltage
VIH
0.9Vcc
－
V
－
【Note 6-3】
VI=0V
Input leak current (Low)
IOL
－
μA
【Note 6-3】
VI=3.3～Vcc
【Note 6-3】
Input leak current (High)
IOH
1
－
－
μA
【Note 6-1】
Vcc turn-on/off conditions.
t1≦10 ms
Vcc
3.0V
3.0V
0<t2≦100 ms
0<t3≦100 ms
0<t4≦50 ms
0.3V
Signal
0.3V
0.3V
1000 ms<t5
t4
t5
t1
t2
t3
Vcc-dip conditions
1) 2.4V ＜ Vcc ＜ 3.0V
td ≦ 10 ms
Vcc
3.0V
2.4V
2) At Vcc ＜ 2.5V
td
Vcc-dip conditions should also follow the Vcc turn-on/off
conditions.
【Note 6-2】 Vcc = 3.3V
Max current situation
: Timing ; Typical, Pattern ; All black
【Note 6-3】 CK,R0～R5,G0～G5,B0～B5,Hsync,Vsync,ENAB,R/L,U/D
LD-21605A－7
6-2. Backlight driving section
The backlight system is edge-lighting type with 20 White-LED(White Light Emitting Diode).
The characteristics of White-LED are shown in the following table. (Ta = 25 deg.)
Table 6-2
Parameter
Min.
Typ.
16.0
20
Max.
Unit
V
Remark
LED voltage
-
-
-
-
-
17.5
LED current
=
20mA
LED current range
Number of circuit strings
LED power consumption
LED life time
20
-
mA
4
[Note 1]
[Note 2]
1.28
30,000
-
W
-
Hour
continuous operation
[Note 1] The LED backlight is composed by 4 strings from which 5 LED is connected with the series.
The figure below shows the circuit chart.
In each string, there is a ceramic capacitor for the electrostatic protection.
LED-A1
LED-A3
LED-C3
LED-C1
LED-A2
LED-C2
LED-A4
LED-C4
[Note 2] Calculated value for reference ( IL × VL )
7. Timing Characteristics of input signals
Timing diagrams of input signal are shown in Fig.7
7-1. Timing characteristics
Table 7-1
Parameter
frequency
Symbol
1/Tc
TH/T
Tds
Tdh
TH
MIN
TYP
6.3
50
-
MAX
Unit
MHz
%
ns
ns
Remarks
Clock
Data
-
40
10
10
50.0
360
1
251
50
1
7.0
60
-
-
-
Duty ratio
Setup time
Hold time
Cycle
-
Horizontal sync.
signal
63.6
400
-
262
60
-
320
-
-
μs
450
6
280
-
clock
clock
line
Hz
Pulse width
Cycle
frequency
Pulse width
THp
TV
Vertical sync.
signal
1/TV
TVp
THd
THc
TVh
TVs
【Note7-1】
6
320
-
320
7
line
clock
ns
clock
line
Horizontal display period
320
5
0
Hsync-Clock phase difference
Hsync-Vsync phase difference
Vertical display start position
7
7
In case of lower frequency, the deterioration of display quality, flicker etc., may occur.
Please use this module in more than 50Hz.(1/Tv)
【Note7-1】
LD-21605A－8
7-2. Horizontal display position
Table 7-2
Parameter
symbol
Tes
Tep
Min.
10
320
7
Typ.
-
-
Max.
-
-
Unit
ns
clock
clock
Remark
Enable signal
Setup time
Pulse width
Hsync-Enable signal phase
difference
The
7
7
Please do not make ENAB fixation in "L".
The Horizontal display start position (The) is fixed 7 clock.
7-3. Vertical display position
The Vertical display start position (TVs) is fixed 7 line.
ENAB signal has no relation to the vertical display position.
7-4. Input Data Signals and Display Position on the screen
ＵＰ
D1,DH1
D1,DH2
D1,DH3
D2,DH1
D2,DH2
D3,DH1
D320,DH1
R G B
D1,DH240
D320,DH240
Display position of input data (H,V)
LD-21605A－9
TH
THp
Horizontal sync.
signal
0.9Vcc
0.1Vcc
Tc
0.1Vcc
0.1Vcc
（Hsync）
Tch
Tcl
THc
Clock signal
0.1Vcc
C1＊
（CK）
Tdh
C5＊
C6＊
C7＊
(Number of clock count)
Tds
Number of Horizontal data
Data（R0～5、
0.9Vcc
D318
D319
Horizontal invalid data period
D320
D1
D2
D3
G0～5、B0～5） Horizintal invalid data period
D4
D5
THd
The
0.9Vcc
Data Enable signal
Tes
（ENAB）
0.1Vcc
Tep
TV
Vertical Sync
signal
TVp
0.9Vcc
0.1Vcc
0.1Vcc
（Vsync）
TVh
Horizontal sync
signal
0.9Vcc
（Hsync）
Line1
Line2
Line7
(Number of Vertical count)
TVd
TVs
Data（R0～5、
Vertical invalid data period
Vertical invalid data period
DH1
DH2
DH3
DH239 DH240
G0～5、B0～5）
Fig 7. Input signal waveforms
LD-21605A－10
(８) Input Signals, Basic Display Color and Gray Scale of Each Color
Colors & Data signal
Gray scale Gray Scale R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5
Black
Blue
0
0
0
0
1
1
1
1
0
1
0
0
0
0
0
1
1
1
1
0
0
1
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
1
1
0
0
1
1
0
0
0
0
0
1
1
0
0
1
1
0
0
0
0
0
1
1
0
0
1
1
0
0
0
0
0
1
1
0
0
1
1
0
0
0
0
0
1
1
0
0
1
1
0
0
0
0
0
1
1
0
0
1
1
0
0
0
0
1
0
1
0
1
0
1
0
0
0
0
1
0
1
0
1
0
1
0
0
0
0
1
0
1
0
1
0
1
0
0
0
0
1
0
1
0
1
0
1
0
0
0
0
1
0
1
0
1
0
1
0
0
0
0
1
0
1
0
1
0
1
0
0
0
－
－
Green
Cyan
－
－
Red
－
Magenta
Yellow
White
Black
－
－
－
GS0
GS1
GS2
×
Darker
×
Ø
È
È
È
È
È
È
È
È
Brighter
GS61
GS62
GS63
1
0
1
0
0
0
0
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
0
0
0
0
1
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Ø
Red
Black
GS0
GS1
GS2
×
Darker
×
Ø
È
È
È
È
È
È
È
È
Brighter
GS61
GS62
GS63
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
1
0
0
0
0
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
0
0
0
0
1
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Ø
Green
Black
GS0
GS1
GS2
×
Darker
×
Ø
È
È
È
È
È
È
È
È
Brighter
GS61
GS62
GS63
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
1
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Ø
Bleu
0 :Low level voltage
1 :High level voltage
Each basic color can be displayed in 64 gray scales from 6 bit data signals. According to the combination of total 18
bit data signals, the 262,144-color display can be achieved on the screen.
LD-21605A－11
9. Optical characteristics
Table 9-1
Parameter
Ta=25℃, VCC =+3.3V
Symbol
21, 22
θ11
Condition
Min
75
Typ
80
Max
－
Unit
Remarks
θ
θ
°(degree) 【Note 9-1】
°(degree)
Viewing angle range
75
80
CR≧5
－
55
65
θ12
－
°(degree)
Contrast ratio
CRmax
Optimal
viewing angle
θ＝０°
440
550
－
【Note 9-2】
Response Rise
30
10
ms
ms
τr
τd
x
－
－
－
－
【Note 9-3】
time
Fall
0.263
0.279
320
0.363
0.379
－
White chromaticity
0.313
0.329
400
y
【Note 9-4】
Luminance
Y
cd/m2
Remarks:The optical specifications are measured 30 minute after turing LED on and in a dark room or equivalent
condition, according to the method shown in Fig.9-1 below.
Photodetector:SR-3(TOPCON)
Field=2°
400ｍｍ
LCD panel
TFT-LCD Module
Center of the screen
Fig.9-1 Optical characteristics measurement method
LD-21605A－12
【Note 9-1】 Viewing angle range is defined as follows.
Normal line
12 o’clock
direction
θ22
θ12
θ11
θ21
6 o’clock direction
The best viewing angle of this module is slightly leaned to 12 o’clock from normal line.
Where θ11＞θmax gray scale is reversed partially.
,
Where θ11＜θmax, or in θ12 direction, gray scale isn’t reversed.
【Note 9-2】 Contrast ratio is defined as follows:
Luminance (brightness) with all pixels white
Contrast ratio(CR)=
Luminance (brightness) with all pixels black
※
Measurement point : Center of the active area
【Note 9-3】 Response time is obtained by measuring the transition time of photo detector
output, when input signals are applied so as to make the area "black" to and
from "white".
White
Black
White
１００％
９０％
１０％
０％
τｒ
τｄ
Time
【Note 9-4】 This parameter should be measured at the center of the screen and 30 minutes after turn-on.
The characteristics are measured when the driver circuit is not powered.
【Note 9-5】 The data for LED is for your reference, because LED is consumable component.
LED life time : When a brightness of lamp surface become 50% of the initial value under the
Standard condition.
LD-21605A－13
10. Handling Precautions
a) Be sure to turn off the power supply when inserting or disconnecting the cable.
b)Our TFT-LCD module is designed to be fixed to the hardware with mounting holes on 4-corners on the
backside. Be sure to design the cabinet so that the module can be installed without any extra stress such
as warp or twist.
c) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
d) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
e) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
Handle with care.
f) Since CMOS LSI is used in this module, take care of static electricity and ensure the human earth
when handling. Observe all other precautionary requirements in handling components.
g) Since there is a circuit board in the module back, stress shall not be impressed in designing and
assembling. If stress is impressed, there arises a possibility that circuit parts may be damaged.
h) Direct sunlight on LCD panel may cause degradation of panel quality. Do not expose the LCD panel to
direct sunlight. Lightproof shade etc. should be attached when LCD panel is used under such
environment.
i) Connect GND to 4 place of mounting holes to get stable against EMI and external noise.
j) When handling LCD modules and assembling them into cabinets, please be noted that long-term
storage in the environment of oxidization or deoxidization gas and the use of such materials as
reagent, solvent, adhesive, resin, etc. which generate these gasses, may cause corrosion and
discoloration of the LCD modules.
k) When installing LCD modules in the cabinet, we suggest the reference torque as 0.38±0.3N･m
(with JIS B1122 M3, 6mm).
Since the optimal torque varies according to the screw or building conditions, so be sure to test it
in the actual use condition.
Inserting length to the module shall be within 5mm. Tapping screws shall be tighten only one time.
More than two time tightening is not assured. Please take care in the case of reworking.
l) Liquid crystal contained in the panel may leak if the LCD is broken. Rinse it as soon as possible if it
gets inside your eye or mouth by mistake.
m) Notice: Never dismantle the module , because it will cause failure.
Please don't remove the fixed tape, insulating tape etc that was pasted on the original module.
(except for protection film of the panel and the crepe tape(yellow tape) temporarily adhered on the
module.)
n) Be careful when using it for long time with fixed pattern display as it may cause afterimage.
（Please use a screen saver etc., in order to avoid an afterimage.）
o) Adjusting volume have been set optimally before shipment, so do not change any adjusted value.
If adjusted value is changed, the specification may not be satisfied.
p) If a minute particle get into the module and adheres on an optical material, it may cause display
irregularity issue, etc. Therefore, fine-pitch filters have to be built into cooling and inhalation hole if
you intend to install a fan.
q) Liquid crystal can be damaged by ultraviolet light. Be sure not to operate or storage under direct
sunlight or strong ultraviolet light for a long time.
r) Please storage modules in ambient temperature if possible. Below the storage temperature, liquid
crystal can freeze and damage the LCD panel. Above storage temperature, it can irreversibly turn into
isotropic state which cannot work as display.
s) Epoxy resin (amine series curing agent), silicone adhesive material (dealcoholization series and
oxime series), tray forming agent (azo compound) etc, in the cabinet or the packing materials may
induce abnormal display with polarizer film deterioration regardress of contact or noncontact to
polarizer film.
Be sure to confirm the component of them.
LD-21605A－14
12.Reliability Test Items
No. Test items
Test conditions
１
２
３
Leaves the module at Ta = +70℃ for 240h
【Note 1】
【Note 1】
High temperature
storage test
Leaves the module at Ta=－30℃ for 240h
Low temperature
storage test
Operates the module at Tp= +40℃, 95%RH for 240h
High temperature
and high humidity
operating test
High temperature
operating test
Low temperature
operating test
Strength against
ESD
(No condensation)
【Note 1】
４
５
６
７
８
Operates the module at Tp=+70°C for 240h
【Note 1】
Operates the module at Tp=－30℃ for 240h
【Note 1】
±200V・200pF(0Ω)
1 time for each terminals
490m/s2・11ms, ±X；±Y；±Z once for each direction
Shock test
(non-operating)
Vibration test
(non-operating)
Frequency：5～57Hz, One side：0.076mm
Frequency：58～500Hz, Acceleration：9.8m/s2
Sweep cycle：11 minutes
X,Y,Z 1 hours for each directions ( total 3 hours ) 【Note 2】
Ta=－30℃～+70℃ , 50 cycles
９
Thermal shock test
(0.5h) (0.5h)
【Result evaluation criteria】
Under the display quality test conditions with normal operation state, these shall be
no change which may affect practical display function.
【Note 1】 Ta= Ambient temperature, Tp= Panel surface temperature
【Note 2】 X,Y,Z directions are shown as follows:
Ｚ
Ｙ
Ｘ
LD-21605A－15
13. Packing Form
1-1 packaging detail
Please refer “Figure A” for the detailed packing form.
1-2 Carton stock conditions
a) Maximum number of Carton being stuck: Max. 9 cartons
b) Maximum number of product contained: 20 Unit
c) Carton size:
d) Total mass :
534 mm(W)×349 mm(D)×195 mm(H)
7.6 kg (MAX)
e) Carton stock environment:
1) Temperature:
2) Humidity:
0 ~ 40°C
Less than 60%RH
3) Ambiance:
4) Period:
No gases bite into electronic components and wiring materials
Approximately 3month
5) Unpacking:
Take care not to get LCD module damaged by ESD.
When unpacking, the room humidity shall be controlled to be
more than 50%RH.
Please unpack packages by effective means against ESD
(the earthing Band, for example).
1-3 Barcode label print
Serial No. consists of 10 numbers. The role of each number is as follows:
1st: last number of the year of manufacture (0-9)
2nd: month of manufacture (1-9,X,Y,Z)
3rd-4th: SHARP handling No. (fixed value=0X)
5th: manufacturing location (fixed value=D)
6th-10th: serial No. (1-9)
ex. The 12th product of Dec. 2011 = 1Z0XD00012
Product number
Serial number
Barcode
LD-21605A－16
sleeve
Modules
MAX 4pcs/1tray
Tray
5pcs+1pcs(blank cover)
Master Carton
Barcode label
Figure. A : packing form
Technical Document
LCD Specification
LCD Group
NORTH AMERICA
EUROPE
JAPAN
Sharp Microelectronics of the Americas
5700 NW Pacific Rim Blvd.
Camas, WA 98607, U.S.A.
Phone: (1) 360-834-2500
Fax: (1) 360-834-8903
www.sharpsma.com
Sharp Microelectronics Europe
Division of Sharp Electronics (Europe) GmbH
Sonninstrasse 3
Sharp Corporation
Electronic Components & Devices
22-22 Nagaike-cho, Abeno-Ku
Osaka 545-8522, Japan
Phone: (81) 6-6621-1221
Fax: (81) 6117-725300/6117-725301
www.sharp-world.com
20097 Hamburg, Germany
Phone: (49) 40-2376-2286
Fax: (49) 40-2376-2232
www.sharpsme.com
TAIWAN
Sharp Electronic Components
(Taiwan) Corporation
SINGAPORE
HONG KONG
Sharp Electronics (Singapore) PTE., Ltd.
438A, Alexandra Road, #05-01/02
Alexandra Technopark,
Sharp-Roxy (Hong Kong) Ltd.
Level 26, Tower 1, Kowloon Commerce Centre,
No. 51, Kwai Cheong Road, Kwai Chung,
New Territories, Hong Kong
Phone: (852) 28229311
8F-A, No. 16, Sec. 4, Nanking E. Rd.
Taipei, Taiwan, Republic of China
Phone: (886) 2-2577-7341
Fax: (886) 2-2577-7326/2-2577-7328
Singapore 119967
Phone: (65) 271-3566
Fax: (65) 271-3855
Fax: (852) 28660779
CHINA
www.sharp.com.hk
Sharp Microelectronics of China
(Shanghai) Co., Ltd.
KOREA
Shenzhen Representative Office:
Room 602-603, 6/F.,
Sharp Electronic Components
(Korea) Corporation
28 Xin Jin Qiao Road King Tower 16F
Pudong Shanghai, 201206 P.R. China
Phone: (86) 21-5854-7710/21-5834-6056
Fax: (86) 21-5854-4340/21-5834-6057
Head Office:
International Chamber of Commerce Tower,
168 Fuhua Rd. 3, CBD,
RM 501 Geosung B/D, 541
Dohwa-dong, Mapo-ku
Seoul 121-701, Korea
Phone: (82) 2-711-5813 ~ 8
Fax: (82) 2-711-5819
Futian District, Shenzhen 518048,
Guangdong, P.R. China
Phone: (86) 755-88313505
Fax: (86) 755-88313515
No. 360, Bashen Road,
Xin Development Bldg. 22
Waigaoqiao Free Trade Zone Shanghai
200131 P.R. China
Email: smc@china.global.sharp.co.jp
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Suggested applications (if any) are for standard use; See Important Restrictions for
limitations on special applications. See Limited Warranty for SHARP’s product warranty.
The Limited Warranty is in lieu, and exclusive of, all other warranties, express or implied.
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR USE AND FITNESS FOR A PARTICULAR PURPOSE,
ARE SPECIFICALLY EXCLUDED. In no event will SHARP be liable, or responsible in
any way, for any incidental or consequential economic or property damage.
LD-21605A2
相关型号：
©2020 ICPDF网 联系我们和版权申明