SGM4073 [SGMICRO]
Reset Timer with Integrated Load Switch;型号: | SGM4073 |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | Reset Timer with Integrated Load Switch |
文件: | 总11页 (文件大小:620K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM4073
Reset Timer with Integrated Load Switch
GENERAL DESCRIPTION
FEATURES
The SGM4073 can be used as reset timer as well as
load management switch. The device is very suitable
for highly integrated applications.
Supply Voltage Range: 1.5V to 5.5V
Factory-Set parameters:
Reset Delay Time: 7.7s
Reset Pulse: 468ms
When the mobile device is turned off, press the start
key to keep the PMIC at a logic low level for 1.9s to turn
on the PMIC.
Turn-On Time: 1.9s
Turn-Off Delay: 7.7s
Adjustable Reset Delay Time
6A Maximum Continuous Current
20mΩ (TYP) On-Resistance at VBAT = 3.6V
Output Capacitor Discharge during Reset Period
Slew Rate or Inrush Control with tR: 3ms (TYP)
Enable Zero-Second Test
Since the Quiescent Current of the SGM4073 is as low
as 1μA (TYP), it supports direct interface with
low-voltage chipsets and can maintain low power
consumption.
When the device is used as
a
reset timer,
Available in a Green WLCSP-1.31×1.62-12B
Package
disconnecting the PMIC from the battery power for
468ms will produce a fixed delay time of 7.7s. The
delay time can be adjusted by an external resistor
connected between the DELAY_ADJ pin and ground.
APPLICATIONS
The SGM4073 also can be used as
a
load
management switch. It can disconnect loads with high
shutdown current and high load capacitance (< 200μF)
powered by a supply voltage lower than 6V. The
SGM4073 provides a 20mΩ on-resistance when VBAT is
3.6V.
Computers
Battery
Portable Equipment
Storage Equipment
The
SGM4073
is
available
in
a
Green
WLCSP-1.31×1.62-12B package. It operates over an
ambient temperature range of -40℃ to +85℃.
SG Micro Corp
MAY 2017 – REV. A. 3
www.sg-micro.com
SGM4073
Reset Timer with Integrated Load Switch
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
XXXX
4073
SGM4073
WLCSP-1.31×1.62-12B
SGM4073YG/TR
Tape and Reel, 3000
-40℃ to +85℃
MARKING INFORMATION
NOTE: XXXX = Date Code.
X X X X
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
VBAT to GND...................................................... -0.3V to 6.5V
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
V
OUT to GND ..................................................... -0.3V to 6.5V
Maximum Continuous Switch Current................................6A
Power Dissipation, PD @ TA = 25℃, IOUT = 6A, RON = 20mΩ
.....................................................................................0.72W
Package Thermal Resistance
WLCSP-1.31×1.62-12B, θJA ...................................... 86℃/W
DC Input Voltage
ESD SENSITIVITY CAUTION
nSR0, DSR, OFF, DELAY_ADJ, SYS_WAKE.. -0.5V to 6.5V
DC Input Diode Current, VBAT < 0V..............................-50mA
Junction Temperature .................................................+150℃
Storage Temperature Range........................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
HBM............................................................................ 8000V
MM................................................................................ 400V
CDM ............................................................................1000V
RECOMMENDED OPERATING CONDITIONS
DISCLAIMER
Input Voltage Range
SG Micro Corp reserves the right to make any change in
VBAT .....................................................................1.5V to 5.5V
circuit design, or specifications without prior notice.
nSR0, DSR, OFF, SYS_WAKE..............................0V to 5.5V
Output Voltage Range ........................................... 0V to VBAT
Operating Temperature Range.......................-40℃ to +85℃
SG Micro Corp
MAY 2017
www.sg-micro.com
2
SGM4073
Reset Timer with Integrated Load Switch
PIN CONFIGURATION
(TOP VIEW)
VOUT
VBAT
GND
VOUT
VBAT
DSR
VOUT
A
B
C
D
VBAT
nSR0
DELAY
_ADJ
SYS_
WAKE
OFF
1
2
3
WLCSP-1.31×1.62-12B
PIN DESCRIPTION
FUNCTION
PIN
NAME
Zero-Second Factory-Test Mode
Normal Operation
(Only for tVON and tPHL
)
A1, A2, A3
B1, B2, B3
C1
VOUT
VBAT
Switch Output Pin.
Power Supply Pin.
Ground Pin.
Switch Output Pin.
Power Supply Pin.
Ground Pin.
Logic low.
GND
DSR
nSR0
Delay Selected Input Pin. Connect to GPIO with a
100kΩ pull-up resistor or connect to VBAT directly.
Power-On or Reset Input Pin. Active low. Dampproof
and anti-creeping input.
C2
C3
Logic low.
Adjustable Reset Delay Time Pin. To adjust the reset
delay, a resistor (RADJ) is connected between this pin
and ground. If not used, connect this pin to VBAT
directly.
D1
DELAY_ADJ
Connect to VBAT or GND.
Load Switch Disable Pin. When the rising edge is
D2
OFF
triggered, the load switch changes to off state. Don’t Logic high or low.
leave this pin floating.
System Wake-Up Input Pin. The load switch changes
Logic high or low.
D3
SYS_WAKE
to on state. Dampproof and anti-creeping input.
SG Micro Corp
www.sg-micro.com
MAY 2017
3
SGM4073
Reset Timer with Integrated Load Switch
ELECTRICAL CHARACTERISTICS
(VBAT = 3.6V and TA = +25℃, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
μA
BASIC OPERATION
Shutdown Current
ISD
VOUT Floating, Load Switch = OFF
0.7
18
20
42
65
1.5
36
37
87
90
V
BAT = 5.5V, IOUT = 500mA
On Resistance
RON
VBAT = 3.6V, IOUT = 500mA
VBAT = 1.5V, IOUT = 500mA
Reset Period, IFORCE = 10mA
mΩ
Output Discharge RPULL-DOWN
Input High Voltage
RPD
VIH
Ω
V
1.2
Input Low Voltage
Input Leakage Current (1)
VIL
0.4
1.5
1.5
V
IIN
0V ≤ VBAT ≤ 5.5V
μA
VPOR
VHYS
1.38
0.1
Power-On Reset Threshold
Quiescent Current
V
μA
V
nSR0 = 3.6V, DSR = 3.6V,
SYS_WAKE = GND, OFF = GND,
IOUT = 0mA, Load Switch = ON
IQ
1
2
VCOERU
VCOERD
ICOERSNK
ICOERSRC
VDIS
SYS_WAKE up going
nSR0 down going
0.7
0.6
-50
45
Force Voltage Threshold
Force Current Threshold
SYS_WAKE up going
nSR0 down going
μA
Discharging Residual Voltage
POWER-ON AND RESET TIMING
Turn-On Time for VOUT
0.4
V
tVON
tPHL
tREC
RL = 5kΩ, DSR = HIGH, Figure 1
RL = 5kΩ, DSR = HIGH, Figure 2
RL = 5kΩ, Figure 2
1.4
6.2
376
1.9
7.7
468
2.4
9.2
541
s
s
Timer Delay before Reset
Reset Timeout Delay of VOUT
LOAD SWITCH TURN-ON TIMING
Turn-On Delay Time
ms
tDON
tR
4
3
7
ms
ms
ms
VOUT Rise Time
RL = 5Ω, CL = 100μF, Figure 3
Turn-On Time, SYS_WAKE to VOUT
LOAD SWITCH TURN-OFF WITH DELAY
Delay to Turn Off Load Switch
VOUT Fall Time
tON
tSD
tF
6.2
7.7
10
9.2
s
ms
s
RL = 150Ω, CL = 100μF, DSR = HIGH,
Figure 4
Turn-Off Time
tOFF
7.7
LOAD SWITCH ZERO-SECOND TURN-OFF
Delay to Turn Off Load Switch
VOUT Fall Time
tSD
tF
2
ms
ms
ms
RL = 150Ω, CL = 100μF, DSR = LOW,
Figure 4
10
12
Turn-Off Time
tOFF
ZERO-SECOND FACTORY-TEST MODE
CL = 5pF, RL = 5kΩ, Load Switch = OFF,
DSR = LOW, Figure 1
CL = 5pF, RL = 5kΩ, Load Switch = ON,
DSR = LOW, Figure 2
Turn-On Time for VOUT
tVON
tPHL
6.3
1.4
ms
ms
Timer Delay before Reset
NOTE 1: Input pins are nSR0, OFF, DSR and SYS_WAKE.
SG Micro Corp
MAY 2017
www.sg-micro.com
4
SGM4073
Reset Timer with Integrated Load Switch
TYPICAL PERFORMANCE CHARACTERISTICS
On Resistance vs. Temperature
On Resistance vs. Supply Voltage
IOUT = 250mA, VIN = 1.5V
0.060
0.050
0.040
0.030
0.020
0.010
0.000
0.060
0.050
0.040
0.030
0.020
0.010
0.000
IOUT = 250mA
I
I
I
I
I
OUT = 250mA, VIN = 1.8V
OUT = 500mA, VIN = 2.5V
OUT = 500mA, VIN = 3.3V
OUT = 1A, VIN = 4.5V
VIN = 1.5V
OUT = 1A, VIN = 5.5V
VIN = 4.5V
VIN = 5.5V
+85℃
+25℃
-40℃
-50
-50
-50
-25
0
25
50
75
100
100
100
0
1
2
3
4
5
6
Supply Voltage (V)
Temperature (℃)
Pull-Down Resistance vs. Temperature
Pull-Down Resistance vs. Supply Voltage
160
140
120
100
80
160
140
120
100
80
VIN = 1.5V
+85℃
+25℃
VIN = 4.5V
VIN = 5.5V
60
60
40
40
-40℃
20
20
0
0
-25
0
25
50
75
0
1
2
3
4
5
6
Temperature (℃)
Supply Voltage (V)
Quiescent Current vs. Temperature
VIN = 3.6V
Shutdown Current vs. Temperature
VIN = 5.5V
1.500
1.300
1.100
0.900
0.700
0.500
1.000
0.800
0.600
0.400
0.200
0.000
VIN = 3.6V
-25
0
25
50
75
-50
-25
0
25
50
75
100
Temperature (℃)
Temperature (℃)
SG Micro Corp
MAY 2017
www.sg-micro.com
5
SGM4073
Reset Timer with Integrated Load Switch
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Fall Time vs. Capacitive Load
VIN = 4.5V
Fall Time vs. Resistive Load
VIN = 4.5V
100
10
100
10
RL = 500Ω
RL = 50Ω
CL = 100μF
1
1
CL = 10μF
CL = 1μF
0.1
0.1
0.01
0.001
0.01
0.001
RL = 5Ω
1
10
100
1000
10000
0.1
1
10
100
1000
Resistive Load (Ω)
Capacitive Load (μF)
Rise/Fall Time vs. Temperature
Rise/Turn-On Delay Time vs. Temperature
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
tF
tR
tDON
tR
VIN = 4.5V, CL = 100μF, RL = 150Ω
-50 -25 25 50
VIN = 4.5V, CL = 100μF, RL = 150Ω
0
75
100
-50
-25
0
25
50
75
100
Temperature (℃)
Temperature (℃)
Rise Time vs. Supply Voltage
Rise Time vs. Supply Voltage
CL = 100μF, RL = 150Ω
6.0
5.6
5.2
4.8
4.4
4.0
3.6
3.2
2.8
2.4
2.0
4.0
3.8
3.6
3.4
3.2
3.0
2.8
2.6
2.4
2.2
2.0
CL = 100μF, RL = 5Ω
+85℃
+85℃
+25℃
-40℃
+25℃
-40℃
4.5
1.5
2
2.5
3
3.5
4
4.5
5
5.5
1.5
2
2.5
3
3.5
4
5
5.5
Supply Voltage (V)
Supply Voltage (V)
SG Micro Corp
www.sg-micro.com
MAY 2017
6
SGM4073
TYPICAL
Reset Timer with Integrated Load Switch
PERFORMANCE
CHARACTERISTICS (continued)
Reset Response
VBAT = 4.5V
CIN = 10μF
VOUT
CL = 100μF
Without external RL
Figure 1. Power-On with
Figure 2. RESET Timing
nSR0
tON
tO
tSD
nSR0
50%
50%
SYS_WAKE
OFF
Time (5ms/div)
90%
VOUT
TIMING DIAGRAMS
VOUT
10%
tR
tVON
tPHL
tDON
nSR0
nSR0
50%
50%
Figure 3. Timing Diagram Figure 4. Timing Diagram
(SYS_WAKE vs. VOUT) (OFF vs. VOUT)
VOUT
50%
VOUT
SG Micro Corp
www.sg-micro.com
MAY 2017
7
SGM4073
Reset Timer with Integrated Load Switch
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
MAY 2017 ‒ REV.A.2 to REV.A.3
Change the Tape and Reel, 5000 to 3000 ...........................................................................................................................................................2
DECEMBER 2016 ‒ REV.A.1 to REV.A.2
Change the Maximum Continuous Current ......................................................................................................................................................1, 2
OCTOBER 2016 ‒ REV.A to REV.A.1
Change the OFF pin description....................................................................................................................................................................3, 10
Changes from Original (MAY 2016) to REV.A
SG Micro Corp
MAY 2017
www.sg-micro.com
8
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
WLCSP-1.31×1.62-12B
NOTE: All linear dimensions are in millimeters.
SG Micro Corp
TX00110.000
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
WLCSP-1.31×1.62-12B
7″
9.2
1.42
1.75
0.71
4.0
4.0
2.0
8.0
Q1
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SGM41511
I2C Controlled 3A Single-Cell Battery Charger with High Input Voltage Capability and Narrow Voltage DC (NVDC) Power Path Management
SGMICRO
©2020 ICPDF网 联系我们和版权申明