SGM41100A [SGMICRO]
True Monolithic Li-Ion/Polymer Battery Protector in Tiny Thin Package;型号: | SGM41100A |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | True Monolithic Li-Ion/Polymer Battery Protector in Tiny Thin Package 电池 |
文件: | 总18页 (文件大小:834K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM41100A
True Monolithic Li-Ion/Polymer
Battery Protector in Tiny Thin Package
GENERAL DESCRIPTION
FEATURES
The SGM41100A is designed for primary protection of
Li-Ion/polymer rechargeable cells. The product integrates
all the protections required for safe operation of polymer
rechargeable cells. The device is packaged in a tiny and
thin package. Its small solution size leaves more space
for fitting the battery cell into a given cavity for small size
wearable devices.
● Ultra-Compact Protection Solution
● Pass Resistance: 42mΩ (TYP)
● Operation Current: 0.9μA (TYP)
● Factory Programmable OVP Threshold Options
4.20V to 4.55V with 0.05V per Step
● Charge/Discharge Over-Current Protection
3 Thresholds Combination Options
● Battery Under-Voltage Protection
2.4V/2.6V/2.8V/3.0V Options
The SGM41100A integrates all the protections and the
required low on-resistance disconnect switch on one
die. The protection features include charge and
discharge protection, detection and protection of a cell
in charge over-voltage, charge over-current, discharge
under-voltage and discharge over-current. The product
also disconnects the battery pack in the case of deep
discharge.
● 50nA Deep Discharge Shutdown
● Exhausted Battery Charging from 0.2V
● Input Surge Clamping
● Input Over-Voltage Safe
● Load Short-Circuit Safe
● Reverse Polarity Battery Safe
● Input Reversed-Attaching Safe
● Battery Pack Paralleling Safe
The SGM41100A operates in -40℃ to +85℃ temperature
range, and is in a thin and low profile UTDFN-1.5×2-6L
package. This package with a nominal height of 0.5mm
is convenient for small cell packing designs.
● Locked-Off for Delivery/Assembly
● Available in a Green UTDFN-1.5×2-6L Package
APPLICATIONS
IoT Gadgets
Wearable Devices
Battery Packs
TYPICAL APPLICATION
0Ω (optional)
C1
1μF
P
R1
1kΩ
PCKP
PCKN
PCKN
BYPS
BATN
BATN
C1
1μF
SGM41100A
R1 1kΩ
SGM
41100A
1.5mm
M
Battery Battery
Pack P Pole P
Battery
Pack N
Battery
Pole M
Pack P Pack N
NOTE: The short-circuit of both ends (P and M) of the battery should be avoided during the battery assembly process.
Figure 1. Typical Application Circuit and Demonstration Board Outline
SG Micro Corp
AUGUST 2021 – REV. A. 2
www.sg-micro.com
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
CM8
XXX
SGM41100A-420M03 UTDFN-1.5×2-6L
SGM41100A-420M05 UTDFN-1.5×2-6L
SGM41100A-420M09 UTDFN-1.5×2-6L
SGM41100A-420N03 UTDFN-1.5×2-6L
SGM41100A-420N05 UTDFN-1.5×2-6L
SGM41100A-420N09 UTDFN-1.5×2-6L
SGM41100A-420O03 UTDFN-1.5×2-6L
SGM41100A-420O05 UTDFN-1.5×2-6L
SGM41100A-420O09 UTDFN-1.5×2-6L
SGM41100A-420P03 UTDFN-1.5×2-6L
SGM41100A-420P05 UTDFN-1.5×2-6L
SGM41100A-420P09 UTDFN-1.5×2-6L
SGM41100A-425M03 UTDFN-1.5×2-6L
SGM41100A-425M05 UTDFN-1.5×2-6L
SGM41100A-425M09 UTDFN-1.5×2-6L
SGM41100A-425N03 UTDFN-1.5×2-6L
SGM41100A-425N05 UTDFN-1.5×2-6L
SGM41100A-425N09 UTDFN-1.5×2-6L
SGM41100A-425O03 UTDFN-1.5×2-6L
SGM41100A-425O05 UTDFN-1.5×2-6L
SGM41100A-425O09 UTDFN-1.5×2-6L
SGM41100A-425P03 UTDFN-1.5×2-6L
SGM41100A-425P05 UTDFN-1.5×2-6L
SGM41100A-425P09 UTDFN-1.5×2-6L
SGM41100A-430M03 UTDFN-1.5×2-6L
SGM41100A-430M05 UTDFN-1.5×2-6L
SGM41100A-420M03YUDT6G/TR
SGM41100A-420M05YUDT6G/TR
SGM41100A-420M09YUDT6G/TR
SGM41100A-420N03YUDT6G/TR
SGM41100A-420N05YUDT6G/TR
SGM41100A-420N09YUDT6G/TR
SGM41100A-420O03YUDT6G/TR
SGM41100A-420O05YUDT6G/TR
SGM41100A-420O09YUDT6G/TR
SGM41100A-420P03YUDT6G/TR
SGM41100A-420P05YUDT6G/TR
SGM41100A-420P09YUDT6G/TR
SGM41100A-425M03YUDT6G/TR
SGM41100A-425M05YUDT6G/TR
SGM41100A-425M09YUDT6G/TR
SGM41100A-425N03YUDT6G/TR
SGM41100A-425N05YUDT6G/TR
SGM41100A-425N09YUDT6G/TR
SGM41100A-425O03YUDT6G/TR
SGM41100A-425O05YUDT6G/TR
SGM41100A-425O09YUDT6G/TR
SGM41100A-425P03YUDT6G/TR
SGM41100A-425P05YUDT6G/TR
SGM41100A-425P09YUDT6G/TR
SGM41100A-430M03YUDT6G/TR
SGM41100A-430M05YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
CMC
XXX
CN7
XXX
CNA
XXX
CNB
XXX
CNC
XXX
CNE
XXX
CNF
XXX
CO0
XXX
CO2
XXX
CO3
XXX
CO4
XXX
CO6
XXX
CO7
XXX
CO8
XXX
COA
XXX
COB
XXX
COC
XXX
COE
XXX
COF
XXX
CP0
XXX
CP2
XXX
CP3
XXX
CP4
XXX
CP6
XXX
CP7
XXX
SG Micro Corp
www.sg-micro.com
AUGUST 2021
2
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
CP8
XXX
SGM41100A-430M09 UTDFN-1.5×2-6L
SGM41100A-430N03 UTDFN-1.5×2-6L
SGM41100A-430N05 UTDFN-1.5×2-6L
SGM41100A-430N09 UTDFN-1.5×2-6L
SGM41100A-430O03 UTDFN-1.5×2-6L
SGM41100A-430O05 UTDFN-1.5×2-6L
SGM41100A-430O09 UTDFN-1.5×2-6L
SGM41100A-430P03 UTDFN-1.5×2-6L
SGM41100A-430P05 UTDFN-1.5×2-6L
SGM41100A-430P09 UTDFN-1.5×2-6L
SGM41100A-435M03 UTDFN-1.5×2-6L
SGM41100A-435M05 UTDFN-1.5×2-6L
SGM41100A-435M09 UTDFN-1.5×2-6L
SGM41100A-435N03 UTDFN-1.5×2-6L
SGM41100A-435N05 UTDFN-1.5×2-6L
SGM41100A-435N09 UTDFN-1.5×2-6L
SGM41100A-435O03 UTDFN-1.5×2-6L
SGM41100A-435O05 UTDFN-1.5×2-6L
SGM41100A-435O09 UTDFN-1.5×2-6L
SGM41100A-435P03 UTDFN-1.5×2-6L
SGM41100A-435P05 UTDFN-1.5×2-6L
SGM41100A-435P09 UTDFN-1.5×2-6L
SGM41100A-440M03 UTDFN-1.5×2-6L
SGM41100A-440M05 UTDFN-1.5×2-6L
SGM41100A-440M09 UTDFN-1.5×2-6L
SGM41100A-440N03 UTDFN-1.5×2-6L
SGM41100A-440N05 UTDFN-1.5×2-6L
SGM41100A-430M09YUDT6G/TR
SGM41100A-430N03YUDT6G/TR
SGM41100A-430N05YUDT6G/TR
SGM41100A-430N09YUDT6G/TR
SGM41100A-430O03YUDT6G/TR
SGM41100A-430O05YUDT6G/TR
SGM41100A-430O09YUDT6G/TR
SGM41100A-430P03YUDT6G/TR
SGM41100A-430P05YUDT6G/TR
SGM41100A-430P09YUDT6G/TR
SGM41100A-435M03YUDT6G/TR
SGM41100A-435M05YUDT6G/TR
SGM41100A-435M09YUDT6G/TR
SGM41100A-435N03YUDT6G/TR
SGM41100A-435N05YUDT6G/TR
SGM41100A-435N09YUDT6G/TR
SGM41100A-435O03YUDT6G/TR
SGM41100A-435O05YUDT6G/TR
SGM41100A-435O09YUDT6G/TR
SGM41100A-435P03YUDT6G/TR
SGM41100A-435P05YUDT6G/TR
SGM41100A-435P09YUDT6G/TR
SGM41100A-440M03YUDT6G/TR
SGM41100A-440M05YUDT6G/TR
SGM41100A-440M09YUDT6G/TR
SGM41100A-440N03YUDT6G/TR
SGM41100A-440N05YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
CPA
XXX
CPB
XXX
CPC
XXX
CPE
XXX
CPF
XXX
CQ0
XXX
CQ2
XXX
CQ3
XXX
CQ4
XXX
CQ6
XXX
CQ7
XXX
CQ8
XXX
CQA
XXX
CQB
XXX
CQC
XXX
CQE
XXX
CQF
XXX
CR0
XXX
CR2
XXX
CR3
XXX
CR4
XXX
CR6
XXX
CR7
XXX
CR8
XXX
CRA
XXX
CRB
XXX
SG Micro Corp
www.sg-micro.com
AUGUST 2021
3
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
CRC
XXX
SGM41100A-440N09 UTDFN-1.5×2-6L
SGM41100A-440O03 UTDFN-1.5×2-6L
SGM41100A-440O05 UTDFN-1.5×2-6L
SGM41100A-440O09 UTDFN-1.5×2-6L
SGM41100A-440P03 UTDFN-1.5×2-6L
SGM41100A-440P05 UTDFN-1.5×2-6L
SGM41100A-440P09 UTDFN-1.5×2-6L
SGM41100A-445M03 UTDFN-1.5×2-6L
SGM41100A-445M05 UTDFN-1.5×2-6L
SGM41100A-445M09 UTDFN-1.5×2-6L
SGM41100A-445N03 UTDFN-1.5×2-6L
SGM41100A-445N05 UTDFN-1.5×2-6L
SGM41100A-445N09 UTDFN-1.5×2-6L
SGM41100A-445O03 UTDFN-1.5×2-6L
SGM41100A-445O05 UTDFN-1.5×2-6L
SGM41100A-445O09 UTDFN-1.5×2-6L
SGM41100A-445P03 UTDFN-1.5×2-6L
SGM41100A-445P05 UTDFN-1.5×2-6L
SGM41100A-445P09 UTDFN-1.5×2-6L
SGM41100A-450M03 UTDFN-1.5×2-6L
SGM41100A-450M05 UTDFN-1.5×2-6L
SGM41100A-450M09 UTDFN-1.5×2-6L
SGM41100A-450N03 UTDFN-1.5×2-6L
SGM41100A-450N05 UTDFN-1.5×2-6L
SGM41100A-450N09 UTDFN-1.5×2-6L
SGM41100A-450O03 UTDFN-1.5×2-6L
SGM41100A-450O05 UTDFN-1.5×2-6L
SGM41100A-440N09YUDT6G/TR
SGM41100A-440O03YUDT6G/TR
SGM41100A-440O05YUDT6G/TR
SGM41100A-440O09YUDT6G/TR
SGM41100A-440P03YUDT6G/TR
SGM41100A-440P05YUDT6G/TR
SGM41100A-440P09YUDT6G/TR
SGM41100A-445M03YUDT6G/TR
SGM41100A-445M05YUDT6G/TR
SGM41100A-445M09YUDT6G/TR
SGM41100A-445N03YUDT6G/TR
SGM41100A-445N05YUDT6G/TR
SGM41100A-445N09YUDT6G/TR
SGM41100A-445O03YUDT6G/TR
SGM41100A-445O05YUDT6G/TR
SGM41100A-445O09YUDT6G/TR
SGM41100A-445P03YUDT6G/TR
SGM41100A-445P05YUDT6G/TR
SGM41100A-445P09YUDT6G/TR
SGM41100A-450M03YUDT6G/TR
SGM41100A-450M05YUDT6G/TR
SGM41100A-450M09YUDT6G/TR
SGM41100A-450N03YUDT6G/TR
SGM41100A-450N05YUDT6G/TR
SGM41100A-450N09YUDT6G/TR
SGM41100A-450O03YUDT6G/TR
SGM41100A-450O05YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
CRE
XXX
CRF
XXX
CS0
XXX
CS2
XXX
CS3
XXX
CS4
XXX
CS6
XXX
CS7
XXX
CS8
XXX
CSA
XXX
CLB
XXX
CSB
XXX
CSD
XXX
CSE
XXX
CSF
XXX
CT1
XXX
CT2
XXX
CM6
XXX
CT4
XXX
CT5
XXX
CT6
XXX
CT8
XXX
CT9
XXX
CTA
XXX
CTC
XXX
CTD
XXX
SG Micro Corp
www.sg-micro.com
AUGUST 2021
4
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
CTE
XXX
SGM41100A-450O09 UTDFN-1.5×2-6L
SGM41100A-450P03 UTDFN-1.5×2-6L
SGM41100A-450P05 UTDFN-1.5×2-6L
SGM41100A-450P09 UTDFN-1.5×2-6L
SGM41100A-455M03 UTDFN-1.5×2-6L
SGM41100A-455M05 UTDFN-1.5×2-6L
SGM41100A-455M09 UTDFN-1.5×2-6L
SGM41100A-455N03 UTDFN-1.5×2-6L
SGM41100A-455N05 UTDFN-1.5×2-6L
SGM41100A-455N09 UTDFN-1.5×2-6L
SGM41100A-455O03 UTDFN-1.5×2-6L
SGM41100A-455O05 UTDFN-1.5×2-6L
SGM41100A-455O09 UTDFN-1.5×2-6L
SGM41100A-455P03 UTDFN-1.5×2-6L
SGM41100A-455P05 UTDFN-1.5×2-6L
SGM41100A-455P09 UTDFN-1.5×2-6L
SGM41100A-450O09YUDT6G/TR
SGM41100A-450P03YUDT6G/TR
SGM41100A-450P05YUDT6G/TR
SGM41100A-450P09YUDT6G/TR
SGM41100A-455M03YUDT6G/TR
SGM41100A-455M05YUDT6G/TR
SGM41100A-455M09YUDT6G/TR
SGM41100A-455N03YUDT6G/TR
SGM41100A-455N05YUDT6G/TR
SGM41100A-455N09YUDT6G/TR
SGM41100A-455O03YUDT6G/TR
SGM41100A-455O05YUDT6G/TR
SGM41100A-455O09YUDT6G/TR
SGM41100A-455P03YUDT6G/TR
SGM41100A-455P05YUDT6G/TR
SGM41100A-455P09YUDT6G/TR
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
CU0
XXX
CU1
XXX
CU2
XXX
CU4
XXX
CU5
XXX
CU6
XXX
CU8
XXX
CU9
XXX
CUA
XXX
CUC
XXX
CUD
XXX
CUE
XXX
CV0
XXX
CV1
XXX
CV2
XXX
MARKING INFORMATION
NOTE: XXX = Date Code and Trace Code.
Serial Number
Y Y Y
X X X
Trace Code
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
SG Micro Corp
www.sg-micro.com
AUGUST 2021
5
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
DEVICE DESCRIPTION
Model: SGM41100A-AAABCC
Over-Voltage Threshold Options
Option Code "AAA"
420
425
430
435
440
445
450
455
Over-Voltage Threshold
VOV (V)
4.20
4.25
4.30
4.35
4.40
4.45
4.50
4.55
Under-Voltage Threshold Options
N
Option Code "B"
M
O
P
Under-Voltage Threshold
VUV (V)
2.4
2.6
2.8
3.0
Current Threshold Combination Options
Option Code "CC"
03
05
09
Charge Over-Current
IOC (A)
0.180
0.340
0.700
Discharge Over-Current
IOD (A)
0.260
0.480
0.900
Short-Circuit Current (A)
4 × 0.260
4 × 0.480
3 × 0.900
SG Micro Corp
www.sg-micro.com
AUGUST 2021
6
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
Supply Voltage Range..............................................0V to 6V
Battery Voltage Range ............................................ 0 to 4.5V
Junction Temperature Range ........................ -40℃ to +85℃
PCKP to PCKN, 13V (1), 10mA Clamping (2) ........................5s
PCKP to PCKN...........................-4.5V or +9V (3), Continuous
PCKP to BATN ............................................-4.5V (3) or +5.5V
PCKP to PCKN Short-Circuit (4)............................ Continuous
PCKP to PCKN Attachment Inrush/Outrush (5)....... +9V/-4.5V
PCKP to BATN Attachment Inrush/Outrush (6) ..............±4.5V
Surge Current (7) ............................................................±20A
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
HBM.............................................................................3000V
CDM ............................................................................1000V
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
NOTES:
1. Evaluation at VBAT = 4.5V.
2. The clamping may reach 10mA at an input voltage > 13V.
3. Test with a voltage regulated supply that has 2A current
limit and increase the voltage progressively for less than
1V/ms slope rate. Apply a voltage to the device under test
from 0V to given voltages.
4. The device is tested after being installed on the circuit
board in Figure 1. Clip a 4.5V 5A power source onto the P
and M to simulate a battery and short the Pack P and the
Pack N with an 80mΩ wire.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
5. The device is tested after being installed on the circuit
board in Figure 1. Connect a 3.2V supply and 2A sinking
resistor RSINK as showed in Figure 2 to the P and M for inrush
test. Clip a 4.5V 5A supply for outrush test.
circuit design, or specifications without prior notice.
6. The device is tested after being installed on the circuit
board in Figure 1 with the circuit in Figure 3.
7. Parallel or connect in reverse polarity two battery packs of
Figure 1. Limit the battery pack impedance to limit the surge
current to 20A.
Outrush Inrush
CBAT
100μF
Inrush test: to Pack P
RSLMT RSRC 80mΩ
P
Outrush test: to Pack N
Pack P
Power Source
Outrush Test: 4.5V
Inrush Test: 9V
The DUT
in Figure 1
Circuit
Power Source
Inrush Test: 3.2V
Outrush Test: 4.5V
CSRC
100μF
RSINK
M
Pack N
(No Battery)
RSLMT
Inrush test: 0Ω
Outrush test: 4.5Ω
:
RSINK:
Inrush test: 1.6Ω
Inrush test: to Pack N
Outrush test: to Pack P
Outrush test: open
Figure 2. Test Set-Up for Pack P to Pack N Attachment Inrush/Outrush
Outrush Inrush
Inrush test: to N
R
SRC 80mΩ RSLMT 4.5Ω
P
Pack P
Outrush test: to P
The DUT
in Figure 1
Circuit
CLOAD
100μF
Power Source
4.5V
CSRC
100μF
RLOAD
M
Pack N
(No Battery)
Inrush test: to P
Outrush test: to N
Figure 3. Test Set-Up for Pack P to BATN Attachment Inrush/Outrush
SG Micro Corp
www.sg-micro.com
AUGUST 2021
7
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
PIN CONFIGURATION
(TOP VIEW)
1
2
3
6
5
4
PCKP
PCKN
PCKN
BYPS
BATN
BATN
NC
UTDFN-1.5×2-6L
PIN DESCRIPTION
PIN
NAME
TYPE
FUNCTION
Power Input and Output, the Battery Pack Positive Connection. The default state after
battery attached is closed or locked-off, dependent on the external circuitry. Connect
a 200nF capacitor between PCKN pin and BATN pin for setting the default state to
closed. It is recommended to connect a 0Ω resistor between PCKP pin and BYPS pin
for suppressing noise applied to the PCKP input.
1
PCKP
P
Power Input and Output, the Battery Pack Cathode. Short this pin to BATN pin to
release off the locked-open state, and make the output path closed.
2, 3
4, 5
PCKN
BATN
P
G
Ground of Internal Circuit. Connect to the battery cathode end.
Bypass Pin and Disconnection Locked-Off Triggering Input. Place a 1μF capacitor
between this pin and BATN pin. Shorting this pin to PCKN pin momentarily places the
circuit into locked-open state.
6
BYPS
NC
I/O
NC
Not Connected Internally. It is recommended to connect to PCKN pin or BATN pin for
benefiting ESD shielding or recovering from the over-current protection. The over-all
leakage condition on a specific PCB board may have different effects on the recovery
process. With this process, the on-board verification is a necessary proof of better
connection.
Exposed
Pad
NOTE: I/O = Input or Output, G = Ground, P = Power for the Circuit, NC = Not Connected.
SG Micro Corp
www.sg-micro.com
AUGUST 2021
8
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
ELECTRICAL CHARACTERISTICS
(TJ = +25℃, ICHG = IDIS = 200mA, VBAT = 3.7V, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
4.225
4.240
4.250
4.275
4.290
4.300
4.325
4.340
4.350
4.375
4.390
4.400
4.425
4.440
4.450
4.475
4.490
4.500
4.525
4.540
4.550
4.575
4.590
4.600
UNITS
4.175
4.160
4.150
4.225
4.210
4.200
4.275
4.260
4.250
4.325
4.310
4.300
4.375
4.360
4.350
4.425
4.410
4.400
4.475
4.460
4.450
4.525
4.510
4.500
TJ = +25℃
SGM41100A-420_ _ _
SGM41100A-425_ _ _
SGM41100A-430_ _ _
SGM41100A-435_ _ _
SGM41100A-440_ _ _
SGM41100A-445_ _ _
SGM41100A-450_ _ _
SGM41100A-455_ _ _
4.200
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
4.250
4.300
4.350
4.400
4.450
4.500
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
Charge Over-Voltage Threshold
VOV
V
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
4.550
145
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
Charger voltage lower
than battery voltage
OV Release Hysteresis
VOVHYS
100
190
mV
TJ = -40℃ to +85℃
2.36
2.35
2.34
2.56
2.55
2.54
2.76
2.75
2.74
2.96
2.95
2.94
2.44
2.45
2.46
2.64
2.65
2.66
2.84
2.85
2.86
3.04
3.05
3.06
TJ = +25℃
SGM41100A-_ _ _M _ _
SGM41100A-_ _ _ N_ _
SGM41100A-_ _ _ O_ _
SGM41100A-_ _ _ P_ _
2.40
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
2.60
2.80
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
Battery Under-Voltage Threshold
VUV
V
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
TJ = +25℃
3.00
100
TJ = -20℃ to +55℃
TJ = -40℃ to +85℃
When a charging supply is
applied
UV Release Hysteresis
VUVHYS
70
130
mV
TJ = -40℃ to +85℃
SG Micro Corp
www.sg-micro.com
AUGUST 2021
9
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
ELECTRICAL CHARACTERISTICS (continued)
(TJ = +25℃, ICHG = IDIS = 200mA, VBAT = 3.7V, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
1.4
TYP
MAX
1.8
UNITS
TJ = +25℃
Shutdown Voltage
VSHDN
1.6
V
1.2
2.0
TJ = -40℃ to +85℃
0.19
0.17
0.39
0.36
0.77
0.72
0.11
0.10
0.26
0.25
0.58
0.56
38
0.33
0.35
0.57
0.61
1.03
1.10
0.25
0.26
0.42
0.44
0.82
0.86
46
TJ = +25℃
SGM41100A-_ _ _ _03
0.26
0.48
0.90
0.18
0.34
0.70
42
TJ = -40℃ to +85℃
TJ = +25℃
Discharge Over-Current
IOD
SGM41100A-_ _ _ _05
SGM41100A-_ _ _ _09
SGM41100A-_ _ _ _03
SGM41100A-_ _ _ _05
SGM41100A-_ _ _ _09
A
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -40℃ to +85℃
TJ = +25℃
Charge Over-Current
IOC
A
TJ = -40℃ to +85℃
TJ = +25℃
TJ = -40℃ to +85℃
TJ = +25℃
Pass Resistance
Operating Current
RP
mΩ
μA
27
57
TJ = -40℃ to +85℃
TJ = +25℃
1.3
IOP
0.9
1.5
TJ = -40℃ to +85℃
The stable current flowing
into the device when it is in
any of following shutdown
conditions that the battery
voltage is lower than VUV
(then VSHDN if the battery
voltage further drops), the
device is set into latched-off
0.05
0.3
TJ = +25℃
Shutdown Current
ISHDN
μA
TJ = -40℃ to +85℃
923
537
115
67
1209
1342
188
208
113
125
609
676
113
125
0.5
TJ = +25℃
Over-Voltage Detection Delay (1)
tOVPD
tUVPD
tODD
1066
144
80
ms
ms
ms
ms
ms
ms
TJ = -40℃ to +85℃
TJ = +25℃
Under-Voltage Detection Delay (1)
TJ = -40℃ to +85℃
TJ = +25℃
57
Discharge Over-Current Detection Delay (1)
Discharge Over-Current Retry Time (1)
Charge Over-Current Detection Delay (1)
Discharge Short-Circuit Detection Delay
Discharge Short-Circuit Current
33
TJ = -40℃ to +85℃
TJ = +25℃
461
268
57
tRETRY
528
80
TJ = -40℃ to +85℃
TJ = +25℃
tOCD
33
TJ = -40℃ to +85℃
TJ = +25℃
0.196
0.14
tOCSD
0.3
0.7
TJ = -40℃ to +85℃
SGM41100A-_ _ _ _09
Other Options
3 × IOD
4 × IOD
ISC
NOTE:
1. The TYP value and MAX value are combination of the detection delay time and a possible polling period of about 32ms, while
the MIN value represents the minimum detection delay with portion of a polling period added, as the pass path cutting action is
synchronized to the internal polling.
SG Micro Corp
www.sg-micro.com
AUGUST 2021
10
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
TYPICAL PERFORMANCE CHARACTERISTICS
TJ = +25℃, ICHG = IDIS = 200mA, VBAT = 3.7V, unless otherwise noted.
Normalized Charge Over-Voltage vs. Charge Current
Normalized Charge Over-Voltage vs. Temperature
1.5%
1.0%
0.5%
0.0%
-0.5%
-1.0%
-1.5%
0.8%
0.5%
0.3%
0.0%
-0.3%
-0.5%
-0.8%
Normalized to ICHG = 0.1A at TJ = +25℃
Normalized to ICHG = 0.1A at TJ = +25℃
ICHG = 0.1A
I
I
CHG = 0.3A
CHG = 0.5A
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
-10
0
10 20 30 40 50 60 70 80 90
Charge Current (A)
Temperature (℃)
Normalized Charge Over-Current vs. Battery Voltage
Normalized Charge Over-Current vs. Temperature
3%
2%
1.5%
1.0%
0.5%
0.0%
-0.5%
-1.0%
-1.5%
-2.0%
Normalized to VBAT = 3.7V at TJ = +25℃
Normalized to VBAT = 3.7V at TJ = +25℃
1%
0%
-1%
-2%
-3%
VBAT = 3.7V
V
V
BAT = 4.0V
BAT = 4.3V
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5
Battery Voltage (V)
-10
0
10 20 30 40 50 60 70 80 90
Temperature (℃)
Normalized Discharge Over-Current vs. Battery Voltage
3%
Normalized Discharge Over-Current vs. Temperature
6%
4%
Normalized to VBAT = 3.7V at TJ = +25℃
Normalized to VBAT = 3.7V at TJ = +25℃
2%
1%
2%
0%
0%
-2%
-4%
-6%
-8%
-1%
-2%
-3%
VBAT = 3.7V
V
V
BAT = 4.0V
BAT = 4.3V
-10
0
10 20 30 40 50 60 70 80 90
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5
Battery Voltage (V)
Temperature (℃)
SG Micro Corp
www.sg-micro.com
AUGUST 2021
11
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
TJ = +25℃, ICHG = IDIS = 200mA, VBAT = 3.7V, unless otherwise noted.
On-Resistance vs. Battery Voltage
On-Resistance vs. Discharge Current
44.0
43.5
43.0
42.5
42.0
41.5
41.0
43.8
43.6
43.4
43.2
43.0
42.8
42.6
42.4
42.2
42.0
41.8
VBAT = 3.7V
2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5
Battery Voltage (V)
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
Discharge Current (A)
On-Resistance vs. Temperature
VBAT = 3.7V
60
55
50
45
40
35
30
-10
0
10 20 30 40 50 60 70 80 90
Temperature (℃)
SG Micro Corp
www.sg-micro.com
AUGUST 2021
12
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
DETAILED DESCRIPTION
The SGM41100A monitors voltage and current applied
on battery cell connected between PCKP and BATN,
and opens the connection between battery and pack
terminal with its internal switches when a fault condition
is detected.
Current Related Protections
When discharge over-current condition occurs and
keeps for discharge over-current detection delay (tODD),
the discharge path opens. The path closes again after
t
RETRY for retrying.
During a charging condition if a charge over-current is
identified, the SGM41100A enters the locked-off state.
This state can be reset by charger removal (pack
removal).
Voltage Related Protections
When battery voltage reaches over-voltage threshold
(VOV), the charge path is open-circuit. The path closes
again when the charger voltage is lower than battery
voltage and the battery voltage falls back about VOVHYS
below the over-voltage threshold (VOV).
Short-circuit protection: When discharge current
exceeds 4 times or 3 times of the over-current threshold
(4-times for _03/_05 options, 3-times for _09 option),
discharge path disconnects instantly in tOCSD, in order to
protect the battery from potential over-current stress.
After this disconnection, the SGM41100A stays in the
locked-off non-conducting state until being reactivated,
or leakage condition pulls the PCKN potential off the
PCKP's towards to the BATN potential when the load is
fully detached off.
In order to protect the battery from discharge
under-voltage status when battery voltage falls below
VUV for tUVPD or VSHDN instantly, the discharge path is
open-circuit, the device enters into shutdown with only
very low resistive leakage flowing into it, which helps to
keep the battery from harmful exhausted condition as
long as possible. The path closes again when a
charging supply is applied and the battery voltage rises
to about VUVHYS above the VUV threshold.
Burst load outrush: In many systems, overload
conditions will occur momentarily. The device allows for
this short duration discharge condition by allowing the
discharge path to remain closed even after a discharge
over-current is detected for duration of discharge
over-current detection delay.
Charge an exhausted battery: While the battery is
over-discharged the battery could be in the following
states.
a) Battery voltage below 0.2V: Both charge and
discharge paths are open-circuit.
When a charge over-current condition is identified, and
after charge over-current detection deglitch, the charge
path is cut off. The device restores to the conducting
state when the PCKP to PCKN voltage drops about
3mV lower than the battery voltage.
b) Battery voltage in the range of 0.2V to VSHDN: The
battery is charged through the MOSFET body diode.
c) Battery voltage in the range of VSHDN to VUV: The path
switch is on for 144ms (tUVPD) in every 130ms and off
for 2ms when charge current flows through the body
diode. During this period, the charger will see the
terminal voltage steps up/down.
Parallel battery packs: When paralleling two battery
packs utilizing SGM41100As, a momentary current
surge may cause charge over-current protection in the
pack with the lower voltage. The higher voltage pack
can enter a discharge over-current protection. The
charge over-current or discharge over-current protection
resets only after the higher voltage battery pack
discharges to a voltage slightly lower than the lower
voltage pack. After this discharge both packs will
conduct.
d) Battery voltage above under-voltage threshold: In this
condition, the chip enters normal operation and
charge and discharge modes are allowed.
It is highly recommended that the packs should be
placed into a locked-open non-conducting state first (by
connecting BYPS to PCKN momentarily) before being
paralleled to avoid current overstress. When a charge
supply is applied to the paralleled packs, the
locked-open state will release.
SG Micro Corp
www.sg-micro.com
AUGUST 2021
13
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
DETAILED DESCRIPTION (continued)
Battery delivery state: It is recommended to deliver a
battery pack in a locked-off non-conducting state to
avoid unintentional shorting during production handling
or transportation. The circuit of Figure 1 places the
SGM41100A into a locked-off state after battery
attachment by momentarily shorting BYPS and PCKN.
Caution about ESD damage to the battery: The
battery pack might be the biggest element in equipment
and induce much during an ESD event. Careful design
of guided discharge path is desired for the equipment
case sealing air-gap discharge over the battery and
those connect to the battery closely.
Connecting a 220nF capacitor clapping between BATN
and PCKN may place the device into conducting state,
which might couple enough charge for making enough
voltage difference between PCKN and PCKP for over
about 1.3V. The voltage difference is the dividing result
of the clapping capacitance and the load resistance and
capacitance. The 220nF capacitance is recommended for
no load condition.
Caution on electrochemical corrosion: As a battery
can apply potential over the electrodes continuously
and cause electrochemical corrosion, the corrosion
product may spread in the hollow beneath a surface
mount device and cause leakage. Moisture-proof
coating is recommended, especially when using
compact devices.
Cautions for Evaluation Test
Pack activation: In order to release the pack from
locked-off state and to place it into a conducting state,
apply a charging input, or connect PCKN to BATN
momentarily when there is no high load capacitance.
Some types of electronic load simulators may have
excessive inrush current, and some BPM testers may
have voltage transition surges, which may trigger the
protection of the SGM41100A. Careful attention is
required for doing such evaluations with these kinds of
equipment. External voltage and current limits within
the conditions specified in the Absolute Maximum
Ratings section of this datasheet are required.
Caution: The battery short or load side terminal short
outside the protection circuit′s loop during battery
attaching may cause excessive high surge current and
excessive high current-breaking voltage surge, which
may cause damage or degrade the life duration of
battery and protection circuit. It is recorded that the
accidental anode to ground plane shorting causes
heavy surge, which can actually be avoided by leaving
enough clearance around the anode pad on PCB or
Select Protection Parameters
Battery models from different vendors may be
customized for different applications. Consult the
battery vendor for protection limits for specific battery
model.
soldering/attaching the anode firstly in assembly (as the
short between cathode to ground will not cause
excessive surge).
Parameters for the protection circuit and of the charger
circuit affecting same variables should be set for proper
charge or discharge protection sequence. For example,
the over-voltage threshold of the battery should be
50mV ~ 100mV higher than constant voltage threshold
of the charger.
Surge, ESD and Reversed Attachment
The SGM41100A absorbs voltage surge applied
between PCKP and PCKN, by passing the surge
current through its switch and the battery. Surge may
occur when attaching the pack or battery cell.
Cautions on parameter misalignment: If the VOV is
lower than the full charge voltage of the battery charger,
the protection circuit cuts off the battery charge path
before the battery is fully charged, and turns into the
non-conductive locked-off state; if the IOC is lower than
the charge current, the protection circuit also turns itself
into the locked-off state. In either VOV or IOC, the charger
input should be removed and then reapplied for
activating the protection circuit from the locked-off state
to the conducting state. If the charger is not removed
after a VOV or IOV event, the battery will not be charged
even if the battery voltage is depleted.
The SGM41100A survives either if a cell is placed in
reverse or a charge input is attached in reverse, but not
both at the same time. Any of these reverse
attachments, short circuits, inrush surges and outrush
will cause overstress. Do not test those cases in normal
production inspection, as this kind of test itself may
cause performance degradation or even damage the
device.
SG Micro Corp
www.sg-micro.com
AUGUST 2021
14
True Monolithic Li-Ion/Polymer
SGM41100A
Battery Protector in Tiny Thin Package
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
AUGUST 2021‒ REV.A.1 to REV.A.2
Page
Updated Electrical Characteristics section.........................................................................................................................................................10
DECEMBER 2020‒ REV.A to REV.A.1
Page
Updated Electrical Characteristics section.........................................................................................................................................................10
Updated Detailed Description section.......................................................................................................................................................... 13, 14
Changes from Original (OCTOBER 2020) to REV.A
Page
Changed from product preview to production data.............................................................................................................................................All
SG Micro Corp
www.sg-micro.com
AUGUST 2021
15
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
UTDFN-1.5×2-6L
D
e
N6
D1
L
E1
E
k
N3
N1
b1
b
BOTTOM VIEW
TOP VIEW
1.10
0.55
A
0.90
2.60
A1
A2
SIDE VIEW
0.25
0.50
RECOMMENDED LAND PATTERN (Unit: mm)
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
0.600
0.050
MIN
0.020
0.000
MAX
0.024
0.002
A
A1
A2
D
0.500
0.000
0.152 REF
0.006 REF
1.400
1.000
1.900
0.800
1.600
1.200
2.100
1.000
0.055
0.039
0.075
0.031
0.063
0.047
0.083
0.039
D1
E
E1
k
0.300 REF
0.012 REF
b
0.200
0.200
0.300
0.300
0.008
0.008
0.012
0.012
b1
e
0.180 REF
0.500 BSC
0.007 REF
0.020 BSC
L
SG Micro Corp
www.sg-micro.com
TX00115.001
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
UTDFN-1.5×2-6L
7″
9.5
1.70
2.30
0.75
4.0
4.0
2.0
8.0
Q2
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SGM41511
I2C Controlled 3A Single-Cell Battery Charger with High Input Voltage Capability and Narrow Voltage DC (NVDC) Power Path Management
SGMICRO
SGM41512
I2C Controlled 3A Single-Cell Battery Charger with High Input Voltage Capability and Narrow Voltage DC (NVDC) Power Path Management
SGMICRO
SGM41512A
I2C Controlled 3A Single-Cell Battery Charger with High Input Voltage Capability and Narrow Voltage DC (NVDC) Power Path Management
SGMICRO
SGM41513/SGM41513A/SGM41513D
High Input Voltage, 3A Single-Cell Battery Charger with NVDC Power Path Management
SGMICRO
©2020 ICPDF网 联系我们和版权申明