首页 |元器件品牌

4304.6064 [SCHURTER]

Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT;
4304.6064
型号： 4304.6064
厂家： SCHURTER INC.    SCHURTER INC.
描述：

Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT

连接器 电源连接器
文件： 总8页 (文件大小：514K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Power entry modules without line filter  
6762  
https://www.schurter.com /PG05  
IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole and Fuseholder 1-pole  
C14  
C18  
Approvals and Compliances  
70° C  
70° C  
Description  
- Panel Mount :  
Characteristics  
- Line switch non-illuminated or illuminated  
Snap-in or screw-on mounting , from front side Appliance Inlet , pro-  
tection class I or II , Fuseholder for fuse-links 5 x 20 mm , Line Switch  
- Snap-in version with 1- or 2-pole line switch available  
- Screw-on version only with 2-pole line switch  
Weblinks  
pdf datasheet, html-datasheet, General Product Information, Distributor-  
Stock-Check, Accessories, Detailed request for product  
- Meets the requirements of IEC 60335-1 for appliances in unattended  
use. This includes the enhanced requirements of glow wire tests acc.  
to IEC 60695-2-12 and -13.  
- Solder terminals or quick connect terminals  
Technical Data  
Ratings IEC  
Ratings UL/CSA  
Dielectric Strength  
10A / 250VAC; 50Hz  
10A / 250VAC; 60Hz  
> 1.5kVAC between L-N  
> 3kVAC between L/N-PE  
(1min/50Hz)  
appliance inlet/-outlet  
Fuseholder  
C14 / C18 acc. to IEC 60320-1  
UL 498, CSA C22.2 no. 42 (for cold  
conditions) pin-temperature 70 °C, 10A,  
Protection Class I or II  
1-pole, acc. to IEC 60127-6,  
for fuse-links 5 x 20mm  
Admissible power acceptance at higher  
ambient temperature see derating cur-  
ves  
Rocker switch 1 or 2 pole, non-illumi-  
nated or illuminated black, acc. to IEC  
61058-1  
Allowable Operation Tempe-  
rature  
IP-Protection  
-25°C to 70°C  
Power Acceptance @ Ta >  
23°C  
from front side IP 40 acc. to IEC 60529  
Suitable for appliances with protection  
class I or II acc. to IEC 61140  
Solder terminals or quick connect ter-  
minals  
Insulation cover  
Line Switch  
Terminal  
Technical Details  
Panel Thickness S  
Screw  
Mounting screw torque max 0.5Nm  
Snap-in1.0 - 1.5/2.0 - 2.5 mm  
PA6, black, UL 94V-0  
Material: Housing  
Approvals and Compliances  
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about  
Approvals  
Approvals  
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.  
Approval Reference Type: 6762  
Approval Logo  
Certificates  
Certification Body  
Description  
SEMKO Approvals  
SEMKO  
Certificate Number: SE/09137-2A  
UL Approvals  
CSA Approvals  
CSA Approvals  
UL  
UL File Number: E93617  
CSA  
CSA  
CSA Certification Record: 27324  
CCC File Number: 27324  
1
Connectors  
 
Power entry modules without line filter  
6762  
https://www.schurter.com /PG05  
Product standards  
Product standards that are referenced  
Organization  
Design  
Standard  
Description  
Designed according to  
IEC 60320-1  
Appliance couplers for household and similar general purposes  
Miniature fuses. Part 6. Fuse-holders for miniature fuse-links  
Switches for appliances. Part 1. General requirements  
Designed according to  
Designed according to  
Designed according to  
Designed according to  
IEC 60127-6  
IEC 61058-1  
UL 498  
Standard for Attachment Plugs and Receptacles  
CSA C22.2 no. 42  
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices  
Application standards  
Application standards where the product can be used  
Organization  
Design  
Standard  
Description  
Designed for applications acc.  
IEC/UL 60950  
IEC 60950-1 includes the basic requirements for the safety of information  
technologyequipment.  
Designed for applications acc.  
IEC 60335-1  
Safety of electrical appliances for household and similar purposes. Meets  
the requirements for appliances in unattended use. This includes the en-  
hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.  
Compliances  
The product complies with following Guide Lines  
Identification  
Details  
Initiator  
Description  
CE declaration of conformity  
SCHURTER AG  
The CE marking declares that the product complies with the applicable  
requirements laid down in the harmonisation of Community legislation on  
its affixing in accordance with EU Regulation 765/2008.  
RoHS  
SCHURTER AG  
SCHURTER AG  
SCHURTER AG  
EU Directive RoHS 2011/65/EU  
China RoHS  
REACH  
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March  
2007. It is similar to the EU directive RoHS.  
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,  
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as  
"REACH") entered into force.  
2
Connectors  
Power entry modules without line filter  
6762  
https://www.schurter.com /PG05  
Dimensions [mm]  
Screw-on mounting  
0.10  
27.5  
50  
27.1  
18  
8.3  
ø 3.4/  
M3  
L
N
28  
40  
25.6  
3
40  
max. 27.5  
5
Snap-in mounting  
0.10  
27.4  
27.1  
24.7  
L
N
10  
27.3  
30  
Panel thickness  
1.0 - 1.5 mm  
1.6 - 2.0 mm  
X
max. 29  
3.3  
61.3 +_0.1 mm  
61.9 +_0.1 mm  
3
Connectors  
Power entry modules without line filter  
6762  
https://www.schurter.com /PG05  
Derating Curves  
Fuses  
5 x 20 mm (1-pole)  
2.5  
2.0  
1.5  
1.0  
0.5  
0.0  
I = 1.0 In  
I = 0.7 In  
I = << In  
0
20  
40  
60  
80  
100  
Ambient air temperature Ta °C  
Config. Code  
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|  
The characters are placeholders for the correspondingly keys of selections from the key tables.  
Terminal Ground  
Configuration  
key  
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Type  
Type  
Configuration  
key  
without terminal  
solder terminal  
0
1
protection class II  
protection class I  
B
X
long solder terminal (L = 8.5 mm)  
Blade terminal (4.8 x 0.8 mm)  
Blade terminal (6.3 x 0.8 mm)  
Symbols similar as in table A  
3
8
9
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminals  
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminal Fuseholder  
Terminal L  
Configuration  
key  
Terminal Fuseholder  
Configuration  
key  
solder terminal  
1
3
8
9
solder terminal  
1
8
Blade terminal (4.8 x 0.8 mm)  
long solder terminal (L = 8.5 mm)  
Blade terminal (4.8 x 0.8 mm)  
Blade terminal (6.3 x 0.8 mm)  
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Color  
Color  
Configuration  
key  
Black  
A
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Style  
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminals  
Style  
Configuration  
key  
Terminal N  
Configuration  
key  
flange with countersunk holes  
flange with through holes  
snap-in standard type  
insert type  
1
2
3
5
solder terminal  
1
3
8
9
long solder terminal (L = 8.5 mm)  
Blade terminal (4.8 x 0.8 mm)  
Blade terminal (6.3 x 0.8 mm)  
Symbols similar as in table A  
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Dimension S  
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminals  
4
Connectors  
Power entry modules without line filter  
6762  
https://www.schurter.com /PG05  
Dimension "S"  
Configuration  
key  
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Switches  
00  
Switches  
Configuration  
key  
The dimension "S" is displayed in (1/10 mm). This information is also valid for the  
order code  
dead cover  
1
2
3
4
5
6
7
8
9
unipolar switch, 4,8mm blade terminal, black rocker  
unipolar switch, solder terminal, black rocker  
bipolar switch, 4,8mm blade terminal, black rocker  
bipolar switch, solder terminals, black rocker  
bipolar switch, 4,8mm blade terminal, rocker red illuminated  
bipolar switch, solder terminal, rocker red illuminated  
bipolar switch, 4,8mm blade terminals, rocker green illuminated  
bipolar switch, solder terminals, rocker green illuminated  
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Features  
Features  
Configuration  
key  
dead cover  
1
2
3
holder for 1 fuse (text legible, when inlet on top)  
holder for 1 fuse (text legible, when inlet on bottom)  
All Variants  
Type  
Terminal L  
Terminal N  
Terminal  
Ground  
Terminal Fu-  
seholder  
Style  
Features  
Switches  
Config. Code  
Order Number  
protection  
class II  
Blade terminal Blade terminal  
(4.8 x 0.8 mm) (4.8 x 0.8 mm)  
without ter-  
minal  
Blade terminal  
flange with  
holder for 1  
bipolar switch,  
6762-B-8808-A-10024  
4304.6049  
4304.6050  
4304.6051  
4304.6052  
4304.6053  
4304.6054  
4304.6055  
4304.6056  
4304.6057  
4304.6058  
4304.6059  
(4.8 x 0.8 mm) countersunk  
holes  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
on top)  
rocker  
protection  
class II  
Blade terminal Blade terminal  
(4.8 x 0.8 mm) (4.8 x 0.8 mm)  
without ter-  
minal  
Blade terminal snap-in stan-  
(4.8 x 0.8 mm)  
holder for 1  
unipolar  
6762-B-8808-A-30022  
6762-B-8808-A-30024  
6762-X-1111-A-10021  
6762-X-1111-A-10024  
6762-X-1111-A-10025  
6762-X-1111-A-10034  
6762-X-3331-A-30025  
6762-X-8888-A-10021  
6762-X-8888-A-10024  
6762-X-8888-A-10026  
dard type  
fuse (text legi- switch, 4,8mm  
ble, when inlet blade terminal,  
on top)  
black rocker  
protection  
class II  
Blade terminal Blade terminal  
(4.8 x 0.8 mm) (4.8 x 0.8 mm)  
without ter-  
minal  
Blade terminal snap-in stan-  
(4.8 x 0.8 mm)  
holder for 1  
bipolar switch,  
dard type  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
on top)  
rocker  
protection  
class I  
solder terminal solder terminal solder terminal solder terminal  
solder terminal solder terminal solder terminal solder terminal  
solder terminal solder terminal solder terminal solder terminal  
solder terminal solder terminal solder terminal solder terminal  
flange with  
countersunk  
holes  
holder for 1  
fuse (text legi-  
ble, when inlet  
on top)  
dead cover  
protection  
class I  
flange with  
countersunk  
holes  
holder for 1  
bipolar switch,  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
█
on top)  
rocker  
protection  
class I  
flange with  
countersunk  
holes  
holder for 1  
bipolar switch,  
fuse (text legi- solder termi-  
ble, when inlet  
on top)  
nals, black  
rocker  
protection  
class I  
flange with  
countersunk  
holes  
holder for 1  
bipolar switch,  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
on bottom)  
rocker  
protection  
class I  
long solder  
terminal (L =  
8.5 mm)  
long solder  
terminal (L =  
8.5 mm)  
long solder  
terminal (L =  
8.5 mm)  
solder terminal snap-in stan-  
dard type  
holder for 1  
bipolar switch,  
fuse (text legi- solder termi-  
ble, when inlet  
on top)  
nals, black  
rocker  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk  
holes  
flange with  
holder for 1  
fuse (text legi-  
ble, when inlet  
on top)  
dead cover  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk  
holes  
flange with  
holder for 1  
bipolar switch,  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
█
on top)  
rocker  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk  
holes  
flange with  
holder for 1  
bipolar switch,  
fuse (text legi- 4,8mm blade  
ble, when inlet  
on top)  
terminal,  
rocker red  
illuminated  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal  
flange with  
holder for 1  
bipolar switch,  
6762-X-8888-A-10028  
4304.6060  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk  
holes  
fuse (text legi- 4,8mm blade  
ble, when inlet  
on top)  
terminals,  
rocker green  
illuminated  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal  
flange with  
holder for 1  
bipolar switch,  
6762-X-8888-A-10034  
6762-X-8888-A-30021  
4304.6061  
4304.6062  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk  
holes  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
on bottom)  
rocker  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm)  
holder for 1  
fuse (text legi-  
ble, when inlet  
on top)  
dead cover  
dard type  
5
Connectors  
Power entry modules without line filter  
6762  
https://www.schurter.com /PG05  
Type  
Terminal L  
Terminal N  
Terminal  
Ground  
Terminal Fu-  
seholder  
Style  
Features  
Switches  
Config. Code  
Order Number  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type  
holder for 1  
unipolar  
6762-X-8888-A-30022  
4304.6063  
fuse (text legi- switch, 4,8mm  
ble, when inlet blade terminal,  
on top)  
black rocker  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type  
holder for 1  
bipolar switch,  
6762-X-8888-A-30024  
6762-X-8888-A-30025  
6762-X-8888-A-30026  
4304.6064  
4304.6065  
4304.6066  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
█
on top)  
rocker  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type  
holder for 1  
bipolar switch,  
fuse (text legi- solder termi-  
ble, when inlet  
on top)  
nals, black  
rocker  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type  
holder for 1  
bipolar switch,  
fuse (text legi- 4,8mm blade  
ble, when inlet  
on top)  
terminal,  
rocker red  
illuminated  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type  
holder for 1  
bipolar switch,  
6762-X-8888-A-30028  
6762-X-8888-A-30036  
4304.6067  
4304.6068  
fuse (text legi- 4,8mm blade  
ble, when inlet  
on top)  
terminals,  
rocker green  
illuminated  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type  
holder for 1  
bipolar switch,  
fuse (text legi- 4,8mm blade  
ble, when inlet  
on bottom)  
terminal,  
rocker red  
illuminated  
protection  
class I  
Blade terminal Blade terminal Blade terminal solder terminal snap-in stan-  
holder for 1  
unipolar  
6762-X-9991-A-30022  
6762-X-9998-A-10024  
6762-X-9998-A-10026  
4304.6069  
4304.6070  
4304.6071  
(6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm)  
dard type  
fuse (text legi- switch, 4,8mm  
ble, when inlet blade terminal,  
on top)  
black rocker  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal  
flange with  
holder for 1  
bipolar switch,  
(6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) (4.8 x 0.8 mm) countersunk  
holes  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
on top)  
rocker  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal  
flange with  
holder for 1  
bipolar switch,  
(6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) (4.8 x 0.8 mm) countersunk  
holes  
fuse (text legi- 4,8mm blade  
ble, when inlet  
on top)  
terminal,  
rocker red  
illuminated  
protection  
class I  
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-  
holder for 1  
bipolar switch,  
6762-X-9998-A-30024  
6762-X-8881-A-30024  
4304.6072  
4304.6120  
(6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) (4.8 x 0.8 mm)  
dard type  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
on top)  
rocker  
protection  
class I  
Blade terminal Blade terminal Blade terminal solder terminal snap-in stan-  
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type  
holder for 1  
bipolar switch,  
fuse (text legi- 4,8mm blade  
ble, when inlet terminal, black  
on top)  
rocker  
The listet variants should be available from stock Other versions on request www.schurter.com/contact  
█ Most Popular.  
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER  
50 Pcs  
Packaging unit  
6
Connectors  
Power entry modules without line filter  
6762  
https://www.schurter.com /PG05  
Accessories  
Description  
Wire Harness  
Wire harness for SCHURTER products  
Assorted Covers  
Rear Cover  
Mating Outlets/Connectors  
Category / Description  
Connector Overview complete  
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13  
4782  
4022  
4785  
4300-06  
4012  
...  
4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13  
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13  
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13  
4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13  
Connector further types to 6762  
Interconnection Cord Overview complete  
Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black  
Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black  
Interconnection Cord further types to 6762  
6007.0204  
6007.0212  
6007.0214  
Power Supply Cord Overview complete  
Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black  
Power Supply Cord further types to 6762  
6004.0215  
6003.0215  
6000.0224  
6000.0214  
6044.0215  
...  
Power Supply or Interconnection Cord Overview complete  
Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black  
Power Supply or Interconnection Cord further types to 6762  
6044.0204  
7
Connectors  
Power entry modules without line filter  
6762  
https://www.schurter.com /PG05  
Mating Outlets/Connectors shuttered  
Power Cord Overview complete  
Power cord with IEC connector C17, V-Lock, straight  
Power Cord further types to 6762  
VAC17KS  
The specifications, descriptions and illustrations indicated in this document are based on current  
information. All content is subject to modifications and amendments. Information furnished is believed  
to be accurate and reliable. However, users should independently evaluate the suitability and test each  
product selected for their own applications.  
8
Connectors  

相关型号：

4304.6065

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6066

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6072

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6081

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6082

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6083

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6084

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6085

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6087

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6088

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6090

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6093

 Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER
©2020 ICPDF网 联系我们和版权申明