4304.6066 [SCHURTER]
Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT;型号: | 4304.6066 |
厂家: | SCHURTER INC. |
描述: | Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT 连接器 电源连接器 |
文件: | 总8页 (文件大小:514K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Power entry modules without line filter
6762
https://www.schurter.com /PG05
IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole and Fuseholder 1-pole
C14
C18
Approvals and Compliances
70° C
70° C
Description
- Panel Mount :
Characteristics
- Line switch non-illuminated or illuminated
Snap-in or screw-on mounting , from front side Appliance Inlet , pro-
tection class I or II , Fuseholder for fuse-links 5 x 20 mm , Line Switch
- Snap-in version with 1- or 2-pole line switch available
- Screw-on version only with 2-pole line switch
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product
- Meets the requirements of IEC 60335-1 for appliances in unattended
use. This includes the enhanced requirements of glow wire tests acc.
to IEC 60695-2-12 and -13.
- Solder terminals or quick connect terminals
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
10A / 250VAC; 50Hz
10A / 250VAC; 60Hz
> 1.5kVAC between L-N
> 3kVAC between L/N-PE
(1min/50Hz)
appliance inlet/-outlet
Fuseholder
C14 / C18 acc. to IEC 60320-1
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10A,
Protection Class I or II
1-pole, acc. to IEC 60127-6,
for fuse-links 5 x 20mm
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Rocker switch 1 or 2 pole, non-illumi-
nated or illuminated black, acc. to IEC
61058-1
Allowable Operation Tempe-
rature
IP-Protection
-25°C to 70°C
Power Acceptance @ Ta >
23°C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class I or II acc. to IEC 61140
Solder terminals or quick connect ter-
minals
Insulation cover
Line Switch
Terminal
Technical Details
Panel Thickness S
Screw
Mounting screw torque max 0.5Nm
Snap-in1.0 - 1.5/2.0 - 2.5 mm
PA6, black, UL 94V-0
Material: Housing
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6762
Approval Logo
Certificates
Certification Body
Description
SEMKO Approvals
SEMKO
Certificate Number: SE/09137-2A
UL Approvals
CSA Approvals
CSA Approvals
UL
UL File Number: E93617
CSA
CSA
CSA Certification Record: 27324
CCC File Number: 27324
1
Connectors
Power entry modules without line filter
6762
https://www.schurter.com /PG05
Product standards
Product standards that are referenced
Organization
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Switches for appliances. Part 1. General requirements
Designed according to
Designed according to
Designed according to
Designed according to
IEC 60127-6
IEC 61058-1
UL 498
Standard for Attachment Plugs and Receptacles
CSA C22.2 no. 42
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Application standards
Application standards where the product can be used
Organization
Design
Standard
Description
Designed for applications acc.
IEC/UL 60950
IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Designed for applications acc.
IEC 60335-1
Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the en-
hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.
Compliances
The product complies with following Guide Lines
Identification
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS
SCHURTER AG
SCHURTER AG
SCHURTER AG
EU Directive RoHS 2011/65/EU
China RoHS
REACH
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
2
Connectors
Power entry modules without line filter
6762
https://www.schurter.com /PG05
Dimensions [mm]
Screw-on mounting
0.10
27.5
50
27.1
18
8.3
ø 3.4/
M3
L
N
28
40
25.6
3
40
max. 27.5
5
Snap-in mounting
0.10
27.4
27.1
24.7
L
N
10
27.3
30
Panel thickness
1.0 - 1.5 mm
1.6 - 2.0 mm
X
max. 29
3.3
61.3 +_0.1 mm
61.9 +_0.1 mm
3
Connectors
Power entry modules without line filter
6762
https://www.schurter.com /PG05
Derating Curves
Fuses
5 x 20 mm (1-pole)
2.5
2.0
1.5
1.0
0.5
0.0
I = 1.0 In
I = 0.7 In
I = << In
0
20
40
60
80
100
Ambient air temperature Ta °C
Config. Code
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|
The characters are placeholders for the correspondingly keys of selections from the key tables.
Terminal Ground
Configuration
key
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Type
Type
Configuration
key
without terminal
solder terminal
0
1
protection class II
protection class I
B
X
long solder terminal (L = 8.5 mm)
Blade terminal (4.8 x 0.8 mm)
Blade terminal (6.3 x 0.8 mm)
Symbols similar as in table A
3
8
9
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminals
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminal Fuseholder
Terminal L
Configuration
key
Terminal Fuseholder
Configuration
key
solder terminal
1
3
8
9
solder terminal
1
8
Blade terminal (4.8 x 0.8 mm)
long solder terminal (L = 8.5 mm)
Blade terminal (4.8 x 0.8 mm)
Blade terminal (6.3 x 0.8 mm)
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Color
Color
Configuration
key
Black
A
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Style
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminals
Style
Configuration
key
Terminal N
Configuration
key
flange with countersunk holes
flange with through holes
snap-in standard type
insert type
1
2
3
5
solder terminal
1
3
8
9
long solder terminal (L = 8.5 mm)
Blade terminal (4.8 x 0.8 mm)
Blade terminal (6.3 x 0.8 mm)
Symbols similar as in table A
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Dimension S
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminals
4
Connectors
Power entry modules without line filter
6762
https://www.schurter.com /PG05
Dimension "S"
Configuration
key
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Switches
00
Switches
Configuration
key
The dimension "S" is displayed in (1/10 mm). This information is also valid for the
order code
dead cover
1
2
3
4
5
6
7
8
9
unipolar switch, 4,8mm blade terminal, black rocker
unipolar switch, solder terminal, black rocker
bipolar switch, 4,8mm blade terminal, black rocker
bipolar switch, solder terminals, black rocker
bipolar switch, 4,8mm blade terminal, rocker red illuminated
bipolar switch, solder terminal, rocker red illuminated
bipolar switch, 4,8mm blade terminals, rocker green illuminated
bipolar switch, solder terminals, rocker green illuminated
6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Features
Features
Configuration
key
dead cover
1
2
3
holder for 1 fuse (text legible, when inlet on top)
holder for 1 fuse (text legible, when inlet on bottom)
All Variants
Type
Terminal L
Terminal N
Terminal
Ground
Terminal Fu-
seholder
Style
Features
Switches
Config. Code
Order Number
protection
class II
Blade terminal Blade terminal
(4.8 x 0.8 mm) (4.8 x 0.8 mm)
without ter-
minal
Blade terminal
flange with
holder for 1
bipolar switch,
6762-B-8808-A-10024
4304.6049
4304.6050
4304.6051
4304.6052
4304.6053
4304.6054
4304.6055
4304.6056
4304.6057
4304.6058
4304.6059
(4.8 x 0.8 mm) countersunk
holes
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
on top)
rocker
protection
class II
Blade terminal Blade terminal
(4.8 x 0.8 mm) (4.8 x 0.8 mm)
without ter-
minal
Blade terminal snap-in stan-
(4.8 x 0.8 mm)
holder for 1
unipolar
6762-B-8808-A-30022
6762-B-8808-A-30024
6762-X-1111-A-10021
6762-X-1111-A-10024
6762-X-1111-A-10025
6762-X-1111-A-10034
6762-X-3331-A-30025
6762-X-8888-A-10021
6762-X-8888-A-10024
6762-X-8888-A-10026
dard type
fuse (text legi- switch, 4,8mm
ble, when inlet blade terminal,
on top)
black rocker
protection
class II
Blade terminal Blade terminal
(4.8 x 0.8 mm) (4.8 x 0.8 mm)
without ter-
minal
Blade terminal snap-in stan-
(4.8 x 0.8 mm)
holder for 1
bipolar switch,
dard type
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
on top)
rocker
protection
class I
solder terminal solder terminal solder terminal solder terminal
solder terminal solder terminal solder terminal solder terminal
solder terminal solder terminal solder terminal solder terminal
solder terminal solder terminal solder terminal solder terminal
flange with
countersunk
holes
holder for 1
fuse (text legi-
ble, when inlet
on top)
dead cover
protection
class I
flange with
countersunk
holes
holder for 1
bipolar switch,
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
█
on top)
rocker
protection
class I
flange with
countersunk
holes
holder for 1
bipolar switch,
fuse (text legi- solder termi-
ble, when inlet
on top)
nals, black
rocker
protection
class I
flange with
countersunk
holes
holder for 1
bipolar switch,
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
on bottom)
rocker
protection
class I
long solder
terminal (L =
8.5 mm)
long solder
terminal (L =
8.5 mm)
long solder
terminal (L =
8.5 mm)
solder terminal snap-in stan-
dard type
holder for 1
bipolar switch,
fuse (text legi- solder termi-
ble, when inlet
on top)
nals, black
rocker
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk
holes
flange with
holder for 1
fuse (text legi-
ble, when inlet
on top)
dead cover
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk
holes
flange with
holder for 1
bipolar switch,
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
█
on top)
rocker
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk
holes
flange with
holder for 1
bipolar switch,
fuse (text legi- 4,8mm blade
ble, when inlet
on top)
terminal,
rocker red
illuminated
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal
flange with
holder for 1
bipolar switch,
6762-X-8888-A-10028
4304.6060
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk
holes
fuse (text legi- 4,8mm blade
ble, when inlet
on top)
terminals,
rocker green
illuminated
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal
flange with
holder for 1
bipolar switch,
6762-X-8888-A-10034
6762-X-8888-A-30021
4304.6061
4304.6062
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk
holes
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
on bottom)
rocker
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm)
holder for 1
fuse (text legi-
ble, when inlet
on top)
dead cover
dard type
5
Connectors
Power entry modules without line filter
6762
https://www.schurter.com /PG05
Type
Terminal L
Terminal N
Terminal
Ground
Terminal Fu-
seholder
Style
Features
Switches
Config. Code
Order Number
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type
holder for 1
unipolar
6762-X-8888-A-30022
4304.6063
fuse (text legi- switch, 4,8mm
ble, when inlet blade terminal,
on top)
black rocker
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type
holder for 1
bipolar switch,
6762-X-8888-A-30024
6762-X-8888-A-30025
6762-X-8888-A-30026
4304.6064
4304.6065
4304.6066
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
█
on top)
rocker
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type
holder for 1
bipolar switch,
fuse (text legi- solder termi-
ble, when inlet
on top)
nals, black
rocker
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type
holder for 1
bipolar switch,
fuse (text legi- 4,8mm blade
ble, when inlet
on top)
terminal,
rocker red
illuminated
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type
holder for 1
bipolar switch,
6762-X-8888-A-30028
6762-X-8888-A-30036
4304.6067
4304.6068
fuse (text legi- 4,8mm blade
ble, when inlet
on top)
terminals,
rocker green
illuminated
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type
holder for 1
bipolar switch,
fuse (text legi- 4,8mm blade
ble, when inlet
on bottom)
terminal,
rocker red
illuminated
protection
class I
Blade terminal Blade terminal Blade terminal solder terminal snap-in stan-
holder for 1
unipolar
6762-X-9991-A-30022
6762-X-9998-A-10024
6762-X-9998-A-10026
4304.6069
4304.6070
4304.6071
(6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm)
dard type
fuse (text legi- switch, 4,8mm
ble, when inlet blade terminal,
on top)
black rocker
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal
flange with
holder for 1
bipolar switch,
(6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) (4.8 x 0.8 mm) countersunk
holes
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
on top)
rocker
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal
flange with
holder for 1
bipolar switch,
(6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) (4.8 x 0.8 mm) countersunk
holes
fuse (text legi- 4,8mm blade
ble, when inlet
on top)
terminal,
rocker red
illuminated
protection
class I
Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan-
holder for 1
bipolar switch,
6762-X-9998-A-30024
6762-X-8881-A-30024
4304.6072
4304.6120
(6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) (4.8 x 0.8 mm)
dard type
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
on top)
rocker
protection
class I
Blade terminal Blade terminal Blade terminal solder terminal snap-in stan-
(4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type
holder for 1
bipolar switch,
fuse (text legi- 4,8mm blade
ble, when inlet terminal, black
on top)
rocker
The listet variants should be available from stock Other versions on request www.schurter.com/contact
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
50 Pcs
Packaging unit
6
Connectors
Power entry modules without line filter
6762
https://www.schurter.com /PG05
Accessories
Description
Wire Harness
Wire harness for SCHURTER products
Assorted Covers
Rear Cover
Mating Outlets/Connectors
Category / Description
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4782
4022
4785
4300-06
4012
...
4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13
Connector further types to 6762
Interconnection Cord Overview complete
Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black
Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black
Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black
Interconnection Cord further types to 6762
6007.0204
6007.0212
6007.0214
Power Supply Cord Overview complete
Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black
Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black
Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black
Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black
Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black
Power Supply Cord further types to 6762
6004.0215
6003.0215
6000.0224
6000.0214
6044.0215
...
Power Supply or Interconnection Cord Overview complete
Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black
Power Supply or Interconnection Cord further types to 6762
6044.0204
7
Connectors
Power entry modules without line filter
6762
https://www.schurter.com /PG05
Mating Outlets/Connectors shuttered
Power Cord Overview complete
Power cord with IEC connector C17, V-Lock, straight
Power Cord further types to 6762
VAC17KS
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
8
Connectors
相关型号:
©2020 ICPDF网 联系我们和版权申明