1070.0442 [SCHURTER]
TOUCHSCREEN; 触摸屏型号: | 1070.0442 |
厂家: | SCHURTER INC. |
描述: | TOUCHSCREEN |
文件: | 总3页 (文件大小:241K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Analog 5-wire PET-On-Glass Touch Screen Specification
1. Mechanical Dimensions and Construction
1.1
1.2
General: Analog Resistive touch screen is laminated by ITO PET to ITO glass.
Construction :
Item Description
ITO PET
Material
Remarks
0.188mm ITO PET Film Antiglare coating
Surface hardness: 3H
1
(Top layer)
Resistance:300~600Ω/□
Resistance:300~600Ω/□
ITO Patterned Glass (Bottom 2.36mm ITO Glass
layer)
2
3
4
5
6
7
8
9
Tail Base
Kapton
Kapton
Separated Tail
Tail Coverlay
Connector
AMP Compatible
Silver ink
Pitch:2.54mm
Top layer circuit
Bottom layer circuit
Layer to layer contacted
Dot spacer
Silver ink
Silver ink
UV Cure ink
Isolation Adhesive
10 Isolation Layer
Touch screen side view:
Changes that contribute to technical improvement are subject to alternations
2002
Datum Name
Bearb. 24.10.
Maurer
Maurer
TOUCHSCREEN
Gepr.
Vert.
24.10.
15“, 5-Wire
SPECIFICATIONS OF ANALOG RESISTIVE
PET-ON-GLASS TOUCH SCREEN
Manufactured bei Apex Material Technology Corp.
EDV-Datasheet
don’t change manually
H 1070.0442
Zu Änd.
Datum
Name
D 79346 Endingen
Blatt 1 von 3
Index: -
1.3
Input Method and Activation Force
Input Method
1.6mm dia. Delrin stylus
16mm dia. Silicon "finger"
Average Activation Force
10~70 grams
10~ 80 grams
2. Typical Optical Characteristics
2.1
2.2
Visible Light Transmission: >80%
Haze: 3~7% (JIS K-7105)
3. Electrical Specifications
3.1
3.2
3.3
3.4
3.5
3.6
Operating Voltage: 5.5V or less
Contact current: 20mA (maximum)
Circuit close resistance:
30~300Ω
Circuit open resistance: > 10MΩ at 25VDC
Contact bounce: < 15ms
Linear Test : <1.5 %
4. Environment Specification
4.1
4.2
Operating Temperature - 10L C ~ + 60L C Humidity less than 90% RH
Storage Temperature - 20L C ~ + 80L C at Ambient Humidity
5. Reliability Test
5.1
Exposure to high temperature
Touch panel is put into a test machine at the condition of 80 for 120 hours. Then it is left at the room temperature
for 24 hours or more. The measurement must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
5.2
Exposure to low temperature
Touch panel is put into a test machine at the condition of -20 for 120 hours. Then it is left at the room temperature
for 24 hours or more. The measurement must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
Changes that contribute to technical improvement are subject to alternations
2002
Datum Name
Bearb. 24.10.
Maurer
Maurer
TOUCHSCREEN
Gepr.
Vert.
24.10.
15“, 5-Wire
SPECIFICATIONS OF ANALOG RESISTIVE
PET-ON-GLASS TOUCH SCREEN
Manufactured bei Apex Material Technology Corp.
EDV-Datasheet
don’t change manually
H 1070.0442
Zu Änd.
Datum
Name
D 79346 Endingen
Blatt 2 von 3
Index: -
5.3
5.4
Exposure to constant temperature and humidity
Touch panel is put into a test machine at the condition of 60 , 90%RH for 120 hours. Then it is left at the room
temperature for 24 hours or more. The measurement must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
Thermal Shock
Touch panel is put into a test machine at the condition of -20 for 30 minutes, and then 80 for 30 minutes. The
process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measurement
must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
6. Durability test:
6.1
Finger touches
Touch panel is hit 36 millions times with a silicone rubber of R8 finger, hitting rate is by 250g at 2 times per
second. The measurement must satisfy the following:
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
-
-
-
Linearity test: as Sec. 3.6
6.2
Stylus writing
Touch panel is drawn by R0.8 Derlin stylus pen, at 250g forces, repeat one inch by 100K times. The measurement
must satisfy the following:
-
-
-
-
Circuit close resistance: as Sec. 3.3
Circuit open resistance: as Sec. 3.4
Contact bounce: as Sec. 3.5
Linearity test: as Sec. 3.6
7. Optical Performance:
7.1
Optical inspection method and optical defect standards refer to document. A001-2 Touch Screen Optical Quality
Standard.
7.2
7.3
7.4
Outside to Active Area : any optical defected in this area need to be ignored if no effected to touch screen function.
Glass defects such as edge chips and scratches refer to A001-2, Touch Screen Optical Quality Standard.
Others
7.4.1
7.4.2
7.4.3
Folding line should be avoided on the pressure sensitive adhesive.
Refer to document A001-2, Touch Screen Optical Quality Standard.
Always store the touch screen in its original shipping container under normal
Conditions (20~25LC, 65% RH)
Changes that contribute to technical improvement are subject to alternations
2002
Datum Name
Bearb. 24.10.
Maurer
Maurer
TOUCHSCREEN
Gepr.
Vert.
24.10.
15“, 5-Wire
SPECIFICATIONS OF ANALOG RESISTIVE
PET-ON-GLASS TOUCH SCREEN
Manufactured bei Apex Material Technology Corp.
EDV-Datasheet
don’t change manually
H 1070.0442
Zu Änd.
Datum
Name
D 79346 Endingen
Blatt 3 von 3
Index: -
相关型号:
©2020 ICPDF网 联系我们和版权申明