1070.0445 [SCHURTER]

TOUCHSCREEN; 触摸屏
1070.0445
型号: 1070.0445
厂家: SCHURTER INC.    SCHURTER INC.
描述:

TOUCHSCREEN
触摸屏

文件: 总5页 (文件大小:557K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Analog 4-wire PET-On-Glass Touch Screen Specification  
1. Mechanical Dimensions and Construction  
1.1 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass.  
1.2 Construction :  
Item Description  
ITO PET  
Material  
Remarks  
0.188mm ITO PET Film Antiglare coating  
Surface hardness: 3H  
1
(Top layer)  
Resistance:300~600/□  
Resistance:300~600/□  
ITO Patterned Glass (Bottom 1.1mm ITO Glass  
layer)  
2
3
4
5
6
7
8
9
Tail Base  
Kapton  
Separated Tail  
Tail Coverlay  
Conductor  
Kapton  
Copper  
Top layer circuit  
Bottom layer circuit  
Layer to layer contacted  
Dot spacer  
Silver ink  
Silver ink  
Silver ink  
UV Cure ink  
Isolation Adhesive  
PET Film  
10 Isolation Layer  
11 Stiffener  
Touch screen side view:  
Changes that contribute to technical improvement are subject to alternations  
2003  
Datum Name  
Bearb. 27.05.  
Maurer  
Maurer  
TOUCHSCREEN  
Gepr.  
Vert.  
27.05.  
6,4“, 4-wire  
SPECIFICATIONS OF ANALOG RESISTIVE  
PET-ON-GLASS TOUCH SCREEN  
Manufactured by Apex Material Technology Corp.  
EDV-Datasheet  
don’t change manually  
H 1070,0445  
Zu Änd.  
Datum  
Name  
D 79346 Endingen  
Blatt 1 von 5  
Index: -  
1.3  
Input Method and Activation Force  
Input Method  
1.6mm dia. Delrin stylus  
16mm dia. Silicon "finger"  
Average Activation Force  
10~70 grams  
10~ 80 grams  
2. Typical Optical Characteristics  
2.1 Visible Light Transmission: >80%  
2.2 Haze: 3~7% (JIS K-7105)  
3. Electrical Specifications  
3.1 Operating Voltage: 5.5V or less  
3.2 Contact current: 20mA (maximum)  
3.3 Circuit close resistance: X : 350~1000Y : 200~650Ω  
3.4 Circuit open resistance: > 10Mat 25VDC  
3.5 Contact bounce: < 10ms  
3.6 Linear Test : <1.5 %  
3.7 Capacitance:100nF(maximum)  
4. Linearity  
4.1 Linear Test Specification  
Direction X: <1.5 %  
Direction Y: <1.5 %  
4.2 Line Test Circuit for Y Coordinate  
Add 5V between Y1 and Y2 touch the point C0R0 to C9R9 separately, and measure the voltage from X1 as the  
following drawing.  
Changes that contribute to technical improvement are subject to alternations  
2003  
Datum Name  
Bearb. 27.05.  
Maurer  
Maurer  
TOUCHSCREEN  
Gepr.  
Vert.  
27.05.  
6,4“, 4-wire  
SPECIFICATIONS OF ANALOG RESISTIVE  
PET-ON-GLASS TOUCH SCREEN  
Manufactured by Apex Material Technology Corp.  
EDV-Datasheet  
don’t change manually  
H 1070,0445  
Zu Änd.  
Datum  
Name  
D 79346 Endingen  
Blatt 2 von 5  
Index: -  
4.3 Calculate Linearity : For the First Row0  
R0avg = ( VC0 + VC1 + VC2 +- - - - - - - + VC9) ÷ 10  
R0max = The maximum voltage in Row 0  
R0min = The minimum voltage in Row 0  
R0 linear1 = R0 max – R0 avg.  ÷ R0 avg. 100%  
R0 linear2 = R0 min – R0 avg.  ÷ R0 avg. 100%  
R0 linear = max (R0 linear1, R0 linear2)  
4.4 For X Coordinate Test  
Add 5 voltage between X1 and X2 touch the point C0R0 to C9R9 separately and measure the voltage from Y1  
as the above drawing  
4.5 Calculate Linearity : For the First Column0  
C0avg = ( VR0 + VR1 + VR2 +- - - - - - - + VR9 ) ÷ 10  
C0max = The maximum voltage in Column 0  
C0min = The minimum voltage in Column 0  
C0 linear1 = C0 max – C0 avg.  ÷ C0 avg. 100%  
C0 linear2 = C0 min – C0 avg.  ÷ C0 avg. 100%  
C0 linear = max ( C0 linear1 ,C0 linear2 )  
Changes that contribute to technical improvement are subject to alternations  
2003  
Datum Name  
Bearb. 27.05.  
Maurer  
Maurer  
TOUCHSCREEN  
Gepr.  
Vert.  
27.05.  
6,4“, 4-wire  
SPECIFICATIONS OF ANALOG RESISTIVE  
PET-ON-GLASS TOUCH SCREEN  
Manufactured by Apex Material Technology Corp.  
EDV-Datasheet  
don’t change manually  
H 1070,0445  
Zu Änd.  
Datum  
Name  
D 79346 Endingen  
Blatt 3 von 5  
Index: -  
5. Environment Specification  
5.1  
5.2  
Operating Temperature - 10° C ~ + 60° C  
Storage Temperature - 20° C ~ + 80° C  
Humidity less than 90% RH  
at Ambient Humidity  
6. Reliability Test  
Exposure to high temperature  
6.1  
6.2  
6.3  
6.4  
Touch panel is put into a test machine at the condition of 80for 120 hours. Then it is left at the room temperature  
for 24 hours or more. The measurement must satisfy the following:  
-
-
-
-
Circuit close resistance: as Sec. 3.3  
Circuit open resistance: as Sec. 3.4  
Contact bounce: as Sec. 3.5  
Linearity test: as Sec. 3.6  
Exposure to low temperature  
Touch panel is put into a test machine at the condition of -20for 120 hours. Then it is left at the room temperature  
for 24 hours or more. The measurement must satisfy the following:  
-
-
-
-
Circuit close resistance: as Sec. 3.3  
Circuit open resistance: as Sec. 3.4  
Contact bounce: as Sec. 3.5  
Linearity test: as Sec. 3.6  
Exposure to constant temperature and humidity  
Touch panel is put into a test machine at the condition of 60, 90%RH for 120 hours. Then it is left at the room  
temperature for 24 hours or more. The measurement must satisfy the following:  
-
-
-
-
Circuit close resistance: as Sec. 3.3  
Circuit open resistance: as Sec. 3.4  
Contact bounce: as Sec. 3.5  
Linearity test: as Sec. 3.6  
Thermal Shock  
Touch panel is put into a test machine at the condition of -20for 30 minutes, and then 80for 30 minutes. The  
process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measurement  
must satisfy the following:  
-
-
-
-
Circuit close resistance: as Sec. 3.3  
Circuit open resistance: as Sec. 3.4  
Contact bounce: as Sec. 3.5  
Linearity test: as Sec. 3.6  
Changes that contribute to technical improvement are subject to alternations  
2003  
Datum Name  
Bearb. 27.05.  
Maurer  
Maurer  
TOUCHSCREEN  
Gepr.  
Vert.  
27.05.  
6,4“, 4-wire  
SPECIFICATIONS OF ANALOG RESISTIVE  
PET-ON-GLASS TOUCH SCREEN  
Manufactured by Apex Material Technology Corp.  
EDV-Datasheet  
don’t change manually  
H 1070,0445  
Zu Änd.  
Datum  
Name  
D 79346 Endingen  
Blatt 4 von 5  
Index: -  
7. Durability test:  
7.1  
Finger touches  
Touch panel is hit 10 millions times with a silicone rubber of R8 finger, hitting rate is by 250g at 2 times  
per second. The measurement must satisfy the following:  
-
-
-
-
Circuit close resistance: as Sec. 3.3  
Circuit open resistance: as Sec. 3.4  
Contact bounce: as Sec. 3.5  
Linearity test: as Sec. 3.6  
7.2  
Stylus writing  
Touch panel is drawn by R0.8 Derlin stylus pen, at 250g forces, repeat one inch by 100K times. The measurement  
must satisfy the following:  
-
-
-
-
Circuit close resistance: as Sec. 3.3  
Circuit open resistance: as Sec. 3.4  
Contact bounce: as Sec. 3.5  
Linearity test: as Sec. 3.6  
8. Optical Performance  
8.1  
Optical inspection method and optical defect standards refer to document. A001-1Touch Screen Optical Quality  
Standard.〞  
8.2  
8.3  
Outside to Viewing Area : any optical defected in this area need to beignored if no effected to touch screen function.  
Silver Bus Pattern defect : Voids in traces to be less than 50% of the trace width.  
8.3.1 Silver Bus Pattern gap: >0.1mm  
8.3.2 Silver Bus and Active area gap: No silver ink may project beyond the viewing area.  
8.4  
8.5  
Glass defects such as edge chips and scratches refer to A001-1Touch Screen Optical Quality Standard.〞  
Others  
8.5.1 Folding line should be avoided on the pressure sensitive adhesive.  
8.5.2 Refer to document A001 Touch Screen Optical Quality Standard.  
8.5.3 Always store the touch screen in its original shipping container under normal conditions  
(20~25°C, 65% RH)  
Changes that contribute to technical improvement are subject to alternations  
2003  
Datum Name  
Bearb. 27.05.  
Maurer  
Maurer  
TOUCHSCREEN  
Gepr.  
Vert.  
27.05.  
6,4“, 4-wire  
SPECIFICATIONS OF ANALOG RESISTIVE  
PET-ON-GLASS TOUCH SCREEN  
Manufactured by Apex Material Technology Corp.  
EDV-Datasheet  
don’t change manually  
H 1070,0445  
Zu Änd.  
Datum  
Name  
D 79346 Endingen  
Blatt 5 von 5  
Index: -  

相关型号:

1070.0447

TOUCHSCREEN
SCHURTER

1070.0448

TOUCHSCREEN
SCHURTER

1070.0449

TOUCHSCREEN
SCHURTER

1070.0450

TOUCHSCREEN
SCHURTER

1070.0451

TOUCH SCREEN
SCHURTER

1070.0453

TOUCH SCREEN
SCHURTER

1070.0455

TOUCHSCREEN
SCHURTER

1070.0456

TOUCH SCREEN
SCHURTER

1070.0458

TOUCHSCREEN
SCHURTER

1070.0459

TOUCHSCREEN
SCHURTER

1070.0461

TOUCH SCREEN
SCHURTER

1070.0463

TOUCHSCREEN
SCHURTER