TLSD-03-D-2.00-01-F-N [SAMTEC]
Interconnection Device;
| 型号： | TLSD-03-D-2.00-01-F-N |
| 厂家： | 
SAMTEC |
| 描述： | Interconnection Device |
| 文件： | 总3页 (文件大小：294K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLSD-XX-X-XX.XX-01-X-XXX
REVISION A
OPTIONS
-N: NOTCH
-BXX: BREAK OUT
No OF POSITIONS
-03, -04, -05, -07, -08,
-10, -12, 13, -15, -17,
-20, -22, -25
-PXX: POLARIZE MATING
-RW: REVERSE WIRING
-RN1: REVERSE NOTCH
END 1
END ASSEMBLY
-S: SINGLE (SEE FIG. 2)
-D: DOUBLE (SEE FIG. 1)
DO NOT
SCALE FROM
THIS PRINT
-RN2: REVERSE NOTCH
END 2
-SR: STRAIN RELIEF
ASSEMBLY LENGTH
(2.00 [50.8] MIN)
-DXX: DAISY CHAINED
-R: REVERSED CONNECTOR
(ONLY AVAILABLE WITH -DXX)
-M: MIDDLE REVERSED CONNECTOR
(ONLY AVAILABLE WITH -DXX)
-O: OUTSIDE REVERSED CONNECTOR
(ONLY AVAILABLE WITH -DXX)
LEAD STYLE
A
PLATING SPECIFICATION
-L: LIGHT SELECTIVE GOLD
-F: FLASH SELECTIVE GOLD
C2
XX.XX .125
[XX.XX x 25.4 3.175]
NO. OF POS. X .07874 +.205
[NO. OF POS. X 2.00 + 5.21]
REF
END 1
END 2
TLMC-XX-D
TCB-50
BLACK WIRE TO SIDE OF
FIRST POSITION INDICATOR
.010 0.25 MAX.
CABLE OVERHANG
(TYP)
.345±.010 8.76±0.25
SUB-TLSD-XX-01-X-X-XXX
NOTCH DENOTES FIRST POSITION
FIG. 1
TLSD-XX-D-XX.XX-01-X
A
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
XX.XX .125
[XX.XX x 25.4 3.175]
2. ALL ASSEMBLIES TO BE 100 % ELECTRONICALLY TESTED
FOR SHORTS AND OPENS.
3. ALL ASSEMBLIES TO BE 100 % HI-POT TESTED AT 800V.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: CELANEX 3300, COLOR: BLACK
CONTACT: PHOS BRONZE
2mm DBL ROW FEMALE LOW COST IDC ASSEMBLY
DWG. NO.
FIG. 2
TLSD-XX-S-XX.XX-01-X
MAX FLASH ALLOWED: .002[0.05]
MAX GATE VESTIGE: .002[0.05]
TLSD-XX-X-XX.XX-01-X-XXX
(SAME AS FIG. 1 EXCEPT AS SHOWN)
LENNY K
2/16/07
SHEET 1 OF 3
c:\enterprisevault\DWG\MISC\MKTG\TLSD-XX-X-XX.XX-01-X-XXX-MKT.SLDDRW
BY:
5.000 MAX
2.000 MIN
REVISION A
.0750 1.91 REF
.0250 0.64
REF
FIG. 4
-BXX: BREAK OUT OPTION
"XX" = NUMBER OF CONDUCTORS BROKEN
OUT FROM THE FIRST POSITION
TLSD-XX-D-XX.XX-01-X-N-B04 SHOWN
(SAME AS FIG. 1 EXCEPT AS SHOWN)
FIG. 9
-SR OPTION: STRAIN RELIEF OPTION
TLSD-04-S-XX-01-X-SR SHOWN
(SAME AS FIG. 2 EXCEPT AS SHOWN)
07
05
03
01
08
06
04
02
TLCS-XX-D
A
.038 0.97
REF
A
A
.495±.010 12.57±0.254
FIG. 5
-PXX: POLARIZE MATING OPTION
"XX" = POSITION POLARIZED
A
FIG. 8
-RN1: REVERSE NOTCH OPTION ON END 1 ONLY
NOT AVAILABLE WITH -R OPTION
THE SAME POSITION WILL BE POLARIZED ON BOTH ENDS.
(USE PK-07-N)
TLSD-04-D-XX-01-X-RN1 SHOWN
TLSD-XX-D-XX.XX-01-X-P03 SHOWN
(SAME AS FIG. 1 EXCEPT AS SHOWN)
(SAME AS FIG. 1 EXCEPT AS SHOWN)
XX.XX [XX.XX x 25.4] + .75[19.1]±.125[3.18]
A
IN-PROCESS
(-SR ONLY)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
BLACK WIRE TO OPPOSITE
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
SIDE OF FIRST POS. INDICATOR
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
A
FIG. 7
FIG. 6
-RN2: REVERSE NOTCH OPTION ON END 2 ONLY
DESCRIPTION:
-RW: REVERSE WIRING OPTION
TLSD-XX-D-XX.XX-01-X-RW SHOWN
(SAME AS FIG. 1 EXCEPT AS SHOWN)
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
NOT AVAILABLE WITH -R OPTION
2mm DBL ROW FEMALE LOW COST IDC ASSEMBLY
TLSD-04-D-XX-01-X-RN2 SHOWN
DTWLG.SD-XX-X-XX.XX-01-X-XXX
NO.
(SAME AS FIG. 1 EXCEPT AS SHOWN)
SHEET 2 OF 3
c:\enterprisevault\DWG\MISC\MKTG\TLSD-XX-X-XX.XX-01-X-XXX-MKT.SLDDRW
BY:
LENNY K
2/16/07
REVISION A
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
MIDDLE SOCKET REVERSED
WHEN DAISY CHAINED
END 2
END 1
FIG. 10
FIG. 12
-DXX: DAISY CHAINED CONNECTOR OPTION
"XX" = DISTANCE FROM END 2
-M: MIDDLE REVERSED CONNECTOR OPTION
TLSD-04-S-XX-01-X-DXX-M SHOWN
NOT AVAILABLE WITH -SR OPTION
TLSD-04-S-XX-01-X-DXX SHOWN
NOT AVAILABLE WITH -SR OPTION
(SAME AS FIG. 1 EXCEPT AS SHOWN)
ONLY AVAILABLE WITH -DXX OPTION
(SAME AS FIG. 1 EXCEPT AS SHOWN)
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
OUTSIDE SOCKET REVERSED
FIG. 13 WHEN DAISY CHAINED
-O: OUTSIDE REVERSED OPTION
TLSD-04-S-XX-01-X-DXX-O SHOWN
NOT AVAILABLE WITH -SR OPTION
ONLY AVAILABLE WITH -DXX OPTION
(SAME AS FIG. 1 EXCEPT AS SHOWN)
BOTH SOCKETS REVERSED
WHEN DAISY CHAINED
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
FIG. 11
-R: REVERSED CONNECTOR OPTION
TLSD-04-S-XX-01-X-DXX-R SHOWN
NOT AVAILABLE WITH -SR OPTION
ONLY AVAILABLE WITH -DXX OPTION
(SAME AS FIG. 1 EXCEPT AS SHOWN)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm DBL ROW FEMALE LOW COST IDC ASSEMBLY
DWG. NO.
TLSD-XX-X-XX.XX-01-X-XXX
c:\enterprisevault\DWG\MISC\MKTG\TLSD-XX-X-XX.XX-01-X-XXX-MKT.SLDDRW
BY:
LENNY K
2/16/07
SHEET 3 OF 3
相关型号：
©2020 ICPDF网 联系我们和版权申明