TLSD-03-S-02.00-01-F-R [SAMTEC]
Board Connector;
| 型号： | TLSD-03-S-02.00-01-F-R |
| 厂家： | 
SAMTEC |
| 描述： | Board Connector 连接器 |
| 文件： | 总3页 (文件大小：169K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLSD-XX-X-XX.XX-01-X-XXX
REVISION M
OPTIONS
-N: NOTCH
-BXX: BREAK OUT
No OF POSITIONS
-03, -04, -05, -07, -08,
-10, -12, 13, -15, -17,
-20, -22, -25
DO NOT
SCALE FROM
THIS PRINT
-PXX: POLARIZE MATING
-RW: REVERSE WIRING
-RN1: REVERSE NOTCH
END 1
END ASSEMBLY
-S: SINGLE (SEE FIG. 2)
-D: DOUBLE (SEE FIG. 1)
-RN2: REVERSE NOTCH
END 2
-SR: STRAIN RELIEF
ASSEMBLY LENGTH
(2.00 [50.8] MIN)
-DXX: DAISY CHAINED
-R: REVERSED CONNECTOR
-M: MIDDLE REVERSED CONNECTOR
(ONLY AVAILABLE WITH -DXX)
-O: OUTSIDE REVERSED CONNECTOR
(ONLY AVAILABLE WITH -DXX)
LEAD STYLE
C2
XX.XX .125
[XX.XX x 25.4 3.175]
PLATING SPECIFICATION
-L: LIGHT SELECTIVE GOLD
-F: FLASH SELECTIVE GOLD
NO. OF POS. X .07874 +.205
[NO. OF POS. X 2.00 + 5.21]
REF
END 1
END 2
TLMC-XX-D
C1
.010 0.25 MAX.
CABLE OVERHANG
(TYP)
BLACK WIRE TO SIDE OF
FIRST POSITION INDICATOR
.345±.010 8.76±0.25
TCB-50
SUB-TLSD-XX-01-X-X-XXX
NOTCH DENOTES FIRST POSITION
FIG 1
TLSD-XX-D-XX.XX-01-X
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
XX.XX .125
[XX.XX x 25.4 3.175]
2. ALL ASSEMBLIES TO BE 100 % ELECTRONICALLY TESTED
FOR SHORTS AND OPENS.
3. ALL ASSEMBLIES TO BE 100 % HI-POT TESTED AT 800V.
4. FOR CONNECTOR ASSEMBLY SEE DRAWING
SUB-TLSD-XX-XX-X-X-CCC.
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: CELANEX 3300, COLOR: BLACK
CONTACT: PHOS BRONZE
2mm DBL ROW FEMALE LOW COST IDC ASSEMBLY
DWG. NO.
FIG 2
WIRE: 28 AWG, 7/36 STRANDED, TINNED
TLSD-XX-S-XX.XX-01-X
COPPER WITH PVC INSULATOR
MAX FLASH ALLOWED: .002[0.05]
MAX GATE VESTIGE: .002[0.05]
TLSD-XX-X-XX.XX-01-X-XXX
(SAME AS FIG 1 EXCEPT AS SHOWN)
LENNY K
2/16/07
SHEET 1 OF 3
F:\DWG\MISC\MKTG\TLSD-XX-X-XX.XX-01-X-XXX-MKT.SLDDRW
BY:
5.000 MAX
2.000 MIN
REVISION M
.0750 1.91 REF
.040 1.02
REF
FIG 4
-BXX: BREAK OUT OPTION
"XX" = NUMBER OF CONDUCTORS BROKEN
OUT FROM THE FIRST POSITION
TLSD-XX-D-XX.XX-01-X-N-B04 SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
NOTCH
NOTCH
FIG. 3
-N: NOTCH OPTION
TLSD-XX-D-XX.XX-01-X-N SHOWN
(SAME AS FIG. 1 EXCEPT AS SHOWN)
NOTCH
FIG 9
-SR OPTION: STRAIN RELIEF OPTION
TLSD-04-D-XX-01-X-SR SHOWN
(SAME AS FIG 2 EXCEPT AS SHOWN)
07
05
03
01
08
06
04
02
TLCS-XX-D
.495±.010 12.57±0.254
FIG 5
-PXX: POLARIZE MATING OPTION
"XX" = POSITION POLARIZED
FIG 8
(REVERSE POLARIZATION NOTCH)
-RN1: REVERSE NOTCH OPTION ON END 1 ONLY
NOT AVAILABLE WITH -R OPTION
THE SAME POSITION WILL BE POLARIZED ON BOTH ENDS.
(USE PK-07-N)
TLSD-XX-D-XX.XX-01-X-P03 SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
TLSD-04-D-XX-01-X-RN1 SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
.345±.010 8.76±0.254
XX.XX [XX.XX x 25.4] + .65[16.5]±.125[3.18]
IN-PROCESS
(-SR ONLY)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
BLACK WIRE TO OPPOSITE
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
SIDE OF FIRST POS. INDICATOR
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
FIG 7
e-Mail info@SAMTEC.com
(REVERSE POLARIZATION NOTCH)
-RN2: REVERSE NOTCH OPTION ON END 2 ONLY
NOT AVAILABLE WITH -R OPTION
TLSD-04-D-XX-01-X-RN2 SHOWN
FIG 6
DESCRIPTION:
-RW: REVERSE WIRING OPTION
TLSD-XX-D-XX.XX-01-X-RW SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm DBL ROW FEMALE LOW COST IDC ASSEMBLY
DTWLG.SD-XX-X-XX.XX-01-X-XXX
NO.
(SAME AS FIG 1 EXCEPT AS SHOWN)
SHEET 2 OF 3
F:\DWG\MISC\MKTG\TLSD-XX-X-XX.XX-01-X-XXX-MKT.SLDDRW
BY:
LENNY K
2/16/07
REVISION M
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
MIDDLE SOCKET REVERSED
WHEN DAISY CHAINED
END 2
END 1
FIG 10
FIG 12
-DXX: DAISY CHAINED CONNECTOR OPTION
"XX" = DISTANCE FROM END 2
-M: MIDDLE REVERSED CONNECTOR OPTION
TLSD-04-D-XX-01-X-DXX-M SHOWN
NOT AVAILABLE WITH -SR OPTION
ONLY AVAILABLE WITH -DXX
TLSD-04-D-XX-01-X-DXX SHOWN
NOT AVAILABLE WITH -SR OPTION
(SAME AS FIG 1 EXCEPT AS SHOWN)
(SAME AS FIG 1 EXCEPT AS SHOWN)
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
XX .125
[XX x 25.4 3.18]
(MIN 2.00[50.8])
OUTSIDE SOCKET REVERSED
WHEN DAISY CHAINED
FIG 13
-O: OUTSIDE REVERSED OPTION
TLSD-04-D-XX-01-X-DXX-O SHOWN
NOT AVAILABLE WITH -SR OPTION
ONLY AVAILABLE WITH -DXX
(SAME AS FIG 1 EXCEPT AS SHOWN)
BOTH SOCKETS REVERSED
WHEN DAISY CHAINED
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
FIG 11
-R: REVERSED CONNECTOR OPTION
TLSD-04-D-XX-01-X-DXX-R SHOWN
NOT AVAILABLE WITH -SR OPTION
(SAME AS FIG 1 EXCEPT AS SHOWN)
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2mm DBL ROW FEMALE LOW COST IDC ASSEMBLY
DWG. NO.
TLSD-XX-X-XX.XX-01-X-XXX
F:\DWG\MISC\MKTG\TLSD-XX-X-XX.XX-01-X-XXX-MKT.SLDDRW
BY:
LENNY K
2/16/07
SHEET 3 OF 3
相关型号：
©2020 ICPDF网 联系我们和版权申明