DTC123EKAFRAT146 [ROHM]
Small Signal Bipolar Transistor,;型号: | DTC123EKAFRAT146 |
厂家: | ROHM |
描述: | Small Signal Bipolar Transistor, |
文件: | 总7页 (文件大小:1095K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DTC123EKA FRA
NPN 100mA 50V Digital Transistor (Bias Resistor Built-in Transistor)
Datasheet
AEC-Q101 Qualified
llOutline
Parameter
Value
50V
SOT-346
ꢀ
V
CC
SC-59
ꢀ
ꢀ
I
100mA
2.2kΩ
2.2kΩ
C(MAX.)
ꢀ
R
1
ꢀ
ꢀ
R
2
(SMT3)
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
ꢀ ꢀ ꢀ
llFeatures
1) Built-In Biasing Resistors, R = R = 2.2kΩ
llInner circuit
1
2
2) Built-in bias resistors enable the configuration of
ꢀan inverter circuit without connecting external
ꢀinput resistors (see inner circuit) .
3) Only the on/off conditions need to be set
ꢀfor operation, making the circuit design easy.
4) Complementary PNP Types: DTA123EKA FR
llApplican
INVERTR, INTERFACE, DRIER
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
llPackaging specifications
Basic
Package
size
Taping Reel size Tape width
Part No.
Package
ordering
Marking
22
code
(mm)
(mm)
unit.(pcs)
SOT-346
(SMT3)
DTC123EKA FRA
2928
T146
180
8
3000
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
www.rohm.com
© 2016 ROHMCo., Ltd. All rights reserved.
1/5
20161019 - Rev.001
ꢀ
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
DTC123EKAFRA
Datasheet
llAbsolute maximum ratings (Ta = 25°C)
Parameter
Symbol
VCC
VIN
Values
50
Unit
V
Supply voltage
Input voltage
-10 to 12
100
V
IO
Output current
mA
mA
mW
℃
*1
IC(MAX)
Collector current
10
*2
PD
Power dissipation
200
Tj
Junction temperature
Range of storage temperature
50
Tstg
-55 to +150
℃
llElectrical characteristics (Ta = 25°C)
Values
Parameter
Symbol
Conditions
5V, I = 100μA
Unit
V
n.
-
Typ.
Max.
0.5
-
VI(off)
VI(o
n)
II
V
-
-
CC
O
Input voltage
V = 0.3V, I = 0mA
3.0
-
O
O
I = 10I = 0.5mA
Output voltage
Input current
100
-
300
3.8
500
-
mV
mA
nA
-
O
I
V = 5V
-
I
IO(off)
GI
V
C
= 50V, V = 0V
I
Output current
DC current gain
Input resistance
Resistancatio
-
-
= 5V, I = 20mA
20
1.54
0.8
-
O
O
1
-
-
2.2
1.0
2.86
1.2
kΩ
-
R2/R1
V
= 10V, I = -5mA,
E
CE
*1
fT
Trnsitifrequency
-
250
-
MHz
f = 100MHz
*1 Characteristics of built-in transistor
*2 Each terminal mounted on a reference land.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ
ꢀ
ꢀꢀ ꢀ ꢀ ꢀꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
www.rohm.com
© 2016 ROHMCo., Ltd. All rights reserved.
2/5
20161019 - Rev.001
ꢀ
ꢀ
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
DTC123EKAFRA
Datasheet
llElectrical characteristic curves (T =25°C)
a
Fig.1 Input voltage vs. output current (ON
characteristics)
Fig.2 Output current vs. input voltage (OFF
characteristics)
Fig.3 Output current vs. outpoltage
Fig.4 DC current gain vs. output current
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
www.rohm.com
© 2016 ROHMCo., Ltd. All rights reserved.
3/5
20161019 - Rev.001
ꢀ
ꢀ
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
DTC123EKAFRA
Datasheet
llElectrical characteristic curves (T =25°C)
a
Fig.5 Output voltage vs. output current
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
www.rohm.com
© 2016 ROHMCo., Ltd. All rights reserved.
4/5
20161019 - Rev.001
DTC123EKAFRA
ꢀ
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
Datasheet
llDimensions
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
www.rohm.com
© 2016 ROHMCo., Ltd. All rights reserved.
5/5
20161019 - Rev.001
Notice
Precaution on using ROHM Products
(Note 1)
1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment
,
aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,
bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales
representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any
ROHM’s Products for Specific Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅣ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅢ
2. ROHM designs and manufactures its Products subject to strict quality control sym. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at yoresponsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injurmage to any property, which
a failure or malfunction of our Products may cause. The following are examples ofety measures:
[a] Installation of protection circuits or other protective devices to improve em safety
[b] Installation of redundant circuits to reduce the impact of single or tiplcuit failure
3. Our Products are not designed under any special or extraordinary envints or conditions, as exemplified below.
Accordingly, ROHM shall not be in any way responsible or liable for y damages, expenss or losses arising from the
use of any ROHM’s Products under any special or extraordinary viroments or condition. you intend to use our
Products under any special or extraordinary environments or cotions (as exemd below), your independent
verification and confirmation of product performance, reliabiltc, prior to use, mube ncessary:
[a] Use of our Products in any types of liquid, including teoils, chemicaland rganic solvents
[b] Use of our Products outdoors or in places whee Products are expo direct sunlight or dust
[c] Use of our Products in places where the Pructs re exposed to sed r corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Pructs are exposed to stac electricity or electromagnetic waves
[e] Use of our Products in proximity to hatroducing componetspstic cords, or other flammable items
[f] Sealing or coating our Products wisin or other coating materials
[g] Use of our Products without cleing sidue of flux (if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing ur Products by uswater or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in plabject to dew ation
4. The Products are not subjeto rdiation-proof design.
5. Please verify and cocharacteristics of tor mounted products in using the Products.
6. In particularansient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation performance charactics after on-board mounting is strongly recommended. Avoid applying power
exceeding norrated poweexcinthe power rating under steady-state loading condition may negatively affect
prodct performance and reliabi.
7. De-rate wer Dissipation dending on ambient temperature. When used in sealed area, confirm that it is the use in
nge that does not exceed the maximum junction temperature.
Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PAA-E
Rev.003
© 2015 ROHM Co., Ltd. All rights reserved.
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. e take proper
caution in your manufacturing process and storage so that voltage exceeding the Products mimung will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body uipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stn the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability oducts out of recommened storage time period
may be degraded. It is strongly recommended to confirm solderlity fore using Products owhich storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is icaed on a carton with symbol. Otherwise bent leads
may occur due to excessive stress applied when droppof a carton.
4. Use Products within the specified time after openia midity barrier bagaking irequired before using Products of
which storage time is exceeding the recommended orage time period
Precaution for Product Label
A two-dimensional barcode printed on ROHrodcts label is for M’s internal use only.
Precaution for Disposition
When disposing Products please dispoem properly uuthorized industry waste company.
Precaution for Foreign Exchane ad Foreign Trade act
Since concerned goods mbe fallen under listed ems of export control prescribed by Foreign exchange and Foreign
trade act, please consult ROHM in case of eo
Precaution Regantellectual Propey Rights
1. All informationd data including not limited to application example contained in this document is for reference
only. ROHM donot warrant at fgoing information or data will not infringe any intellectual property rights or any
otherhts of any third party reing such information or data.
2. ROHM ll not have any bligations where the claims, actions or demands arising from the combination of the
cts with other articles suh as components, circuits, systems or external equipment (including software).
. cense, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PAA-E
Rev.003
© 2015 ROHM Co., Ltd. All rights reserved.
相关型号:
DTC123EKAT147
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon,
ROHM
©2020 ICPDF网 联系我们和版权申明