PS7241E-1A-F3 [RENESAS]
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET; 4 -PIN SOP 400 V击穿电压常开型1路光耦合MOS场效应管
| 型号： | PS7241E-1A-F3 |
| 厂家： | 
RENESAS TECHNOLOGY CORP |
| 描述： | 4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET |
| 文件： | 总15页 (文件大小：245K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6.
7.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
9.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
DATA SHEET
Solid State Relay
OCMOS FET
PS7241E-1A
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE
−NEPOC Series−
1-ch Optical Coupled MOS FET
DESCRIPTION
The PS7241E-1A is an optically coupled element that combines a GaAs infrared LED on the input side with a
normally-open MOS FET on the output side to realize an excellent cost performance.
The small, thin package and high sensitivity of this element makes it ideal for battery-driven mobile devices, and its
small offset voltage at power-on and good linearity are also make it suitable for controlling micro analog signals.
FEATURES
PIN CONNECTION
•
•
•
•
•
Small and thin package (4-pin SOP, Height = 2.1 mm)
1 channel type (1 a output)
(Top View)
4
1
3
Designed for AC/DC switching line changer
Low offset voltage
1. LED Anode
<R>
Ordering number of taping product: PS7241E-1A-E3, E4: 900 pcs/reel
: PS7241E-1A-F3, F4: 3 500 pcs/reel
Pb-Free product
2. LED Cathode
3. MOS FET
4. MOS FET
•
•
Safety standards
2
•
•
UL approved: No. E72422
BSI approved: No. 8241/8242
APPLICATIONS
•
•
•
•
Laptop PC, PDA
Modem card
Telephone, FAX
Measurement equipment
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10459EJ04V0DS (4th edition)
Date Published January 2010 NS
Printed in Japan
2004, 2010
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS7241E-1A
PACKAGE DIMENSIONS (UNIT: mm)
4.0 0.5
4
3
7.0 0.3
4.4
1
2
0.5 0.3
2.54
+0.10
0.25 M
0.40
–0.05
<R>
PHOTOCOUPLER CONSTRUCTION
Parameter
Unit (MIN.)
Air Distance
5 mm
5 mm
Outer Creepage Distance
Isolation Distance
0.4 mm
<R>
MARKING EXAMPLE
41EA
N 031
Assembly Lot
No. 1 pin Mark
Initial of NEC
N
*1
(Engraved mark)
N
0
31
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
*1 Bar : Pb-Free
2
Data Sheet PN10459EJ04V0DS
PS7241E-1A
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application Part
Number*1
PS7241E-1A
PS7241E-1A-A
Pb-Free
Magazine case 100 pcs
Standard products
(UL, BSI approved)
PS7241E-1A
PS7241E-1A-E3 PS7241E-1A-E3-A
PS7241E-1A-E4 PS7241E-1A-E4-A
PS7241E-1A-F3 PS7241E-1A-F3-A
PS7241E-1A-F4 PS7241E-1A-F4-A
Embossed Tape 900 pcs/reel
Embossed Tape 3 500 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
50
Unit
mA
V
Diode
Forward Current (DC)
Reverse Voltage
Power Dissipation
Peak Forward Current*1
VR
5.0
PD
50
mW
A
IFP
1
MOS FET Break Down Voltage
Continuous Load Current
VL
400
120
240
V
IL
mA
mA
Pulse Load Current*2
(AC/DC Connection)
ILP
Power Dissipation
Isolation Voltage*3
PD
BV
PT
300
1 500
mW
Vr.m.s.
mW
°C
Total Power Dissipation
Operating Ambient Temperature
Storage Temperature
350
TA
−40 to +85
−40 to +100
Tstg
°C
*1 PW = 100 μs, Duty Cycle = 1%
*2 PW = 100 ms, 1 shot
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
3
Data Sheet PN10459EJ04V0DS
PS7241E-1A
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter
LED Operating Current
LED Off Voltage
Symbol
MIN.
TYP.
10
MAX.
20
Unit
mA
V
IF
4
0
VF
0.5
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Symbol
VF
Conditions
MIN.
TYP.
1.2
MAX.
1.4
Unit
V
Diode
Forward Voltage
Reverse Current
IF = 10 mA
VR = 5 V
IR
5.0
μA
μA
MOS FET Off-state Leakage
Current
ILoff
VD = 400 V
1.0
<R>
<R>
Output Capacitance
Cout
IFon
Ron1
Ron2
ton
VD = 0 V, f = 1 MHz
IL = 120 mA
50
pF
mA
Ω
Coupled
LED On-state Current
On-state Resistance
4.0
30
IF = 10 mA, IL = 10 mA
22
17
IF = 10 mA, IL = 120 mA, t ≤ 10 ms
IF = 10 mA, VO = 5 V, RL = 500 Ω,
PW ≥ 10 ms
23
Turn-on Time*1, 2
0.5
0.07
1.0
0.2
ms
Turn-off Time*1, 2
toff
Isolation Resistance
Isolation Capacitance
RI-O
CI-O
VI-O = 1.0 kVDC
109
Ω
V = 0 V, f = 1 MHz
0.5
pF
*1 Test Circuit for Switching Time
I
F
50%
Input
Pulse Input
V
V
L
0
VO
= 5 V
90%
Input monitor
O
monitor
Output
R
in
R
L
10%
ton
toff
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
4
Data Sheet PN10459EJ04V0DS
PS7241E-1A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
100
80
60
40
20
0
300
200
100
0
85
85
–25
0
25
50
75
100
–25
0
25
50
75
100
Ambient Temperature T
A
(°C)
Ambient Temperature T
A
(°C)
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
1.8
1.6
1.4
1.2
1.0
0.8
200
150
100
50
f = 1 MHz
I
F
= 50 mA
30 mA
20 mA
10 mA
5 mA
1 mA
–25
0
25
50
75
100
0
20
40
60
80
(V)
100
120
Ambient Temperature T
A
(°C)
Applied Voltage V
D
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
LOAD CURRENT vs. LOAD VOLTAGE
10–6
10–7
200
IF = 10 mA
TA = 85°C
100
10–8
10–9
–4.0
–2.0
0
2.0
4.0
25°C
10–10
10–11
10–12
–100
–200
0
100
200
300
400
500
Applied Voltage V
D
(V)
Load Voltage V (V)
L
Remark The graphs indicate nominal characteristics.
5
Data Sheet PN10459EJ04V0DS
PS7241E-1A
ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
40
35
30
25
20
15
10
5
40
35
30
25
20
15
10
5
I
F
L
= 10 mA,
= 10 mA
I
F
L
= 10 mA,
= 120 mA
I
I
0
0
–50
–25
0
25
50
75
(°C)
100
–50
–25
0
25
50
75
(°C)
100
Ambient Temperature T
A
Ambient Temperature T
A
TURN-OFF TIME vs.
TURN-ON TIME vs.
AMBIENT TEMPERATURE
AMBIENT TEMPERATURE
1 000
900
800
700
600
500
400
300
200
100
0
200
180
160
140
120
100
80
I
F
= 10 mA,
I
F
= 10 mA,
V
L
= 5 V,
V
L
= 5 V,
R
L
= 500 Ω
R
L
= 500 Ω
μ
μ
60
40
20
0
–50
–25
0
25
50
75
(°C)
100
–50
–25
0
25
50
75
100
Ambient Temperature T
A
(°C)
Ambient Temperature T
A
TURN-ON TIME vs. FORWARD CURRENT
TURN-OFF TIME vs. FORWARD CURRENT
3.0
0.30
V
L
= 5 V,
= 500 Ω
V
L
= 5 V,
= 500 Ω
RL
RL
2.5
2.0
1.5
1.0
0.5
0.25
0.20
0.15
0.10
0.05
TA
= +85°C
+25°C
T = –40°C
A
+25°C
+85°C
–40°C
0
5
10
15
20
25
0
5
10
15
20
25
Forward Current I
F
(mA)
Forward Current I
F
(mA)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PN10459EJ04V0DS
PS7241E-1A
ON-STATE RESISTANCE DISTRIBUTION
ON-STATE RESISTANCE DISTRIBUTION
30
30
n = 50 pcs,
n = 50 pcs,
I
I
F
= 10 mA,
= 10 mA
I
I
F
= 10 mA,
= 120 mA
25
25
L
L
20
15
20
15
10
5
10
5
0
0
21.6 21.8 22 22.2 22.4 22.6 22.8 23
17
17.2
17.4
17.6
17.8
18
On-state Resistance Ron1 (Ω)
On-state Resistance Ron2 (Ω)
TURN-ON TIME DISTRIBUTION
TURN-OFF TIME DISTRIBUTION
40
35
30
25
20
15
10
5
40
35
30
25
20
15
10
5
n = 50 pcs,
n = 50 pcs,
I
F
= 10 mA,
I
F
= 10 mA,
V
O
= 5 V,
= 500 Ω
V
O
= 5 V,
= 500 Ω
R
L
R
L
0
0
0.2
0.3
0.4
0.5
0.6
0.7
0.03
0.04
0.05
0.06
0.07
0.08
Turn-on Time ton (ms)
Turn-off Time toff (ms)
Remark The graphs indicate nominal characteristics.
7
Data Sheet PN10459EJ04V0DS
PS7241E-1A
TAPING SPECIFICATIONS (in millimeters)
Outline and Dimensions (Tape)
2.0 0.05
4.0 0.1
+0.1
–0
2.9 MAX.
1.5
1.55 0.1
2.4 0.1
0.3
4.6 0.1
8.0 0.1
Tape Direction
PS7241E-1A-E3
PS7241E-1A-E4
Outline and Dimensions (Reel)
2.0 0.5
2.0 0.5
13.0 0.2
φ
φ
φ
R 1.0
φ
21.0 0.8
13.5 1.0
17.5 1.0
11.9 to 15.4
Outer edge of
flange
Packing: 900 pcs/reel
8
Data Sheet PN10459EJ04V0DS
PS7241E-1A
Outline and Dimensions (Tape)
2.0 0.05
+0.1
4.0 0.1
2.9 MAX.
1.5
–0
1.55 0.1
2.4 0.1
0.3
4.6 0.1
8.0 0.1
Tape Direction
PS7241E-1A-F4
PS7241E-1A-F3
Outline and Dimensions (Reel)
2.0 0.5
2.0 0.5
13.0 0.2
φ
φ
R 1.0
φ
φ
φ
21.0 0.8
13.5 1.0
17.5 1.0
11.9 to 15.4
Outer edge of
flange
Packing: 3 500 pcs/reel
9
Data Sheet PN10459EJ04V0DS
PS7241E-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
10 seconds or less
• Time of peak reflow temperature
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 30 s
• Number of reflows
• Flux
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120 30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
260°C or below (molten solder temperature)
10 seconds or less
• Preheating conditions
• Number of times
• Flux
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
• Time (each pins)
350°C or below
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
10
Data Sheet PN10459EJ04V0DS
PS7241E-1A
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
11
Data Sheet PN10459EJ04V0DS
PS7241E-1A
•
The information in this document is current as of January, 2010. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products
and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC
Electronics products are not taken measures to prevent radioactive rays in the product design. When customers
use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate
sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in
order to avoid risks of the damages to property (including public or social property) or injury (including death) to
persons, as the result of defects of NEC Electronics products.
•
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E0904E
12
Data Sheet PN10459EJ04V0DS
PS7241E-1A
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
相关型号：
PS7241E-1A-F3-A
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET
NEC
PS7241E-1A-F4
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET
NEC
PS7241E-1A-F4
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET
RENESAS
PS7241E-1A-F4-A
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET
NEC
PS7241E-1B-A
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
NEC
PS7241E-1B-E3
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
NEC
PS7241E-1B-E3-A
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
NEC
PS7241E-1B-E4
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
NEC
PS7241E-1B-E4-A
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
NEC
PS7241E-1B-F3
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
NEC
©2020 ICPDF网 联系我们和版权申明