ISL54052IRUZ-T [RENESAS]
Ultra Low ON-Resistance, Low Voltage, Single Supply, Single SPST Analog Switches; SOT6, uTDFN6; Temp Range: -40° to 85°C;型号: | ISL54052IRUZ-T |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | Ultra Low ON-Resistance, Low Voltage, Single Supply, Single SPST Analog Switches; SOT6, uTDFN6; Temp Range: -40° to 85°C 光电二极管 |
文件: | 总12页 (文件大小:613K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATASHEET
ISL54051, ISL54052
Ultra Low ON-Resistance, Low Voltage, Single Supply, Single SPST Analog
Switches
FN6459
Rev 3.00
October 19, 2009
The Intersil ISL54051 and ISL54052 devices are low
ON-resistance, low voltage, bidirectional, single
pole/single throw (SPST) analog switches designed to
operate from a single +1.8V to +5.5V supply. Targeted
applications include battery powered equipment, which
Features
• ON-resistance (r
)
ON
- V
- V
- V
= +5.0V . . . . . . . . . . . . . . . . . . . . . 0.8
= +3.0V . . . . . . . . . . . . . . . . . . . . . 1.1
= +1.8V . . . . . . . . . . . . . . . . . . . . . 2.3
CC
CC
CC
benefit from low r
resistance (0.8), excellent r
ON
ON
flatness, and fast switching speeds (t
= 24ns,
= 10ns). The digital logic input is 1.8V logic
ON
t
• r flatness (+4.5V supply). . . . . . . . . . . . . 0.25
ON
• Single supply operation . . . . . . . . . +1.8V to +5.5V
• Fast switching action (+4.5V supply)
OFF
compatible when using a single +3.0V supply.
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins
may be limited and digital geometries are not well
suited to analog switch performance. This family of
parts may be used to switch in additional functionality
while reducing ASIC design risk. The ISL54051 and the
ISL54052 are offered in a 6 Ld 1.2mmx1.0mmx0.5mm
µTDFN package and a 6 Ld SOT-23 package,
alleviating board space limitations.
- t
- t
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24ns
ON
. . . . . . . . . . . . . . . . . . . . . . . . . . . 10ns
OFF
• ESD HBM rating . . . . . . . . . . . . . . . . . . . . . >6kV
• 1.8V, CMOS logic compatible (+3V supply)
• Available in 6 Ld µTDFN and 6Ld SOT-23 Packages
• Pb-free (RoHS compliant)
The ISL54051 has one normally open (NO) switch and
ISL54052 has one normally closed (NC) switch.
Applications
• Battery powered, handheld, and portable
equipment
TABLE 1. FEATURES AT A GLANCE
- Cellular/mobile phones
- Pagers
- Laptops, notebooks, palmtops
ISL54051
1
ISL54052
1
Number of Switches
SW
NO
NC
• Portable test and measurement
• Medical equipment
1.8V r
ON
2.3
2.3
1.8V t
/t
ON OFF
68ns/45ns
1.1
68ns/45ns
1.1
• Audio and video switching
3V r
ON
Related Literature
3V t
/t
ON OFF
29ns/12ns
0.8
29ns/12ns
0.8
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount
Devices (SMDs)”
5V r
ON
5V t
/t
24ns/10ns
24ns/10ns
ON OFF
Packages
6 Ld µTDFN, 6Ld SOT-23
FN6459 Rev 3.00
October 19, 2009
Page 1 of 12
ISL54051, ISL54052
Ordering Information
PART NUMBER
PART
TEMP. RANGE
PACKAGE
(Pb-Free)
PKG.
DWG. #
(Notes 1, 4)
MARKING
(°C)
ISL54051IRUZ-T (Note 2)
ISL54051IHZ-T (Note 3)
ISL54052IRUZ-T (Note 2)
ISL54052IHZ-T (Note 3)
NOTES:
A
-40 to +85
-40 to +85
-40 to +85
-40 to +85
6 Ld (0.40mm pitch) 1.2x1.0x0.5 TDFN, Tape and Reel L6.1.2x1.0A
6 Ld SOT-23, Tape and Reel MDP0038
6 Ld (0.40mm pitch) 1.2x1.0x0.5 TDFN, Tape and Reel L6.1.2x1.0A
6 Ld SOT-23, Tape and Reel MDP0038
4051
B
4052
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach
materials and NiPdAu plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free
soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
4. For Moisture Sensitivity Level (MSL), please see device information page for ISL54051, ISL54052. For more information on
MSL please see techbrief TB363.
Pin Configurations (Note 5)
ISL54051
(6 LD µTDFN)
TOP VIEW
ISL54051
(6 LD SOT-23)
TOP VIEW
N.C. 1
IN
NO 3
6 GND
1
2
3
6
5
4
IN
NO
GND
N.C.
2
5
4
COM
V+
V+
COM
ISL54052
ISL54052
(6 LD µTDFN)
(6 LD SOT-23)
TOP VIEW
TOP VIEW
NC
IN
1
2
3
6 GND
1
2
3
6
5
4
IN
N.C.
GND
5
4
COM
V+
N.C.
V+
COM
NC
NOTE:
5. Switches Shown for Logic “0” Input.
Truth Table
Pin Descriptions
LOGIC
ISL54051
ISL54052
PIN
FUNCTION
0
1
Off
On
On
Off
V+
System Power Supply Input (+1.8V to +5.5V)
Ground Connection
GND
IN
NOTE: Logic “0” 0.5V. Logic “1” 1.4V with a 2V to 5V
Digital Control Input
supply.
COM
NO
Analog Switch Common Pin
Analog Switch Normally Open Pin
Analog Switch Normally Closed Pin
No Connect
NC
N.C.
FN6459 Rev 3.00
October 19, 2009
Page 2 of 12
ISL54051, ISL54052
Absolute Maximum Ratings
Thermal Information
V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 6.5V
Input Voltages
NO, NC, IN (Note 6) . . . . . . . . . . . . . -0.5 to ((V+) + 0.5V)
Output Voltages
COM (Note 6) . . . . . . . . . . . . . . . . . -0.5 to ((V+) + 0.5V)
Continuous Current NO, NC, or COM. . . . . . . . . . . . 300mA
Peak Current NO, NC, or COM
(Pulsed 1ms, 10% Duty Cycle, Max) 600mA
ESD Rating
Thermal Resistance (Typical)
JA (°C/W) JC (°C/W)
6 Ld µTDFN (Note 7) . . . . . . . . . .
6 Ld SOT-23 (Notes 7, 8) . . . . . . .
Maximum Junction Temperature (Plastic Package). . +150°C
Maximum Storage Temperature Range. . . . . -65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
175
260
N/A
120
Operating Conditions
V+ (Positive DC Supply Voltage). . . . . . . . . . . 1.8V to 5.5V
Analog Signal Range . . . . . . . . . . . . . . . . . . . . . . 0V to V+
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . >6kV
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . >200V
Charged Device Model . . . . . . . . . . . . . . . . . . . . .>2.2kV
V
(Digital Logic Input Voltage (IN) . . . . . . . . . . . 0V to V+
IN
Temperature Range. . . . . . . . . . . . . . . . . . -40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
NOTES:
6. Signals on NC, NO, IN, or COM exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to maximum
current ratings.
7. is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief
JA
TB379 for details.
8. For , the “case temp” location is taken at the package top center.
JC
Electrical Specifications - 5V Supply Test Conditions: V+ = +4.5V to +5.5V, GND = 0V, V
= 2.4V, V = 0.8V (Note 9),
INL
Unless Otherwise Specified. Boldface limits apply over the operating temperature
INH
range, -40°C to +85°C.
TEMP
MIN
MAX
PARAMETER
TEST CONDITIONS
(°C) (Notes 10, 11) TYP (Notes 10, 11) UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range,
Full
0
-
V+
V
V
ANALOG
ON-Resistance, r
V+ = 4.5V, I
= 100mA, V
or
= 0V to V+, (See Figure 4, Note 13)
25
Full
25
-
0.86
1
-
-
ON
COM
NO
V
NC
-
-
r
Flatness, r
V+ = 4.5V, I
COM
= 100mA, V
NO
or
0.25
0.27
5
-
ON
FLAT(ON)
V
= 0V to V+, (Notes 12, 13)
NC
Full
25
-
-
NO or NC OFF Leakage
Current, I or
V+ = 5.5V, V
COM
= 0.3V, 5V, V
NO
or
-10
-150
10
150
nA
nA
V
= 5V, 0.3V
NO(OFF)
NC
Full
-
I
NC(OFF)
COM ON Leakage Current, V = 5.5V, V
= 0.3V, 5V, or V
NO
or
25
-20
9
-
20
nA
nA
COM
= 0.3V, 5V, or floating
I
V
COM(ON)
NC
Full
-300
300
DYNAMIC CHARACTERISTICS
Turn-ON Time, t V+ = 4.5V, V
or V
= 3.0V, R = 50,
25
Full
25
-
-
-
-
-
-
24
30
10
15
26
80
-
-
-
-
-
-
ns
ns
ns
ns
pC
dB
ON
NO
NC
L
C = 35pF (See Figure 1, Note 13)
L
Turn-OFF Time, t
V+ = 4.5V, V
NO
L
or V
= 3.0V, R = 50,
L
OFF
NC
C = 35pF (See Figure 1, Note 13)
Full
Charge Injection, Q
OFF Isolation
V = 0V, R = 0, C = 1.0nF (See Figure 2) 25
G G L
R = 50, C = 5pF, f = 100kHz,
25
L
L
RMS
V
= 1V
(See Figure 3)
COM
Total Harmonic Distortion f = 20Hz to 20kHz, V
= 0.5V
,
25
-
0.012
-
%
COM
P-P
R = 600
L
-3dB Bandwidth
NO or NC OFF
R = 50
25
25
-
-
190
16
-
-
MHz
pF
L
V+ = 4.5V, f = 1MHz, V or V = V
NO NC
(See Figure 5)
= 0V
COM
Capacitance, C
OFF
FN6459 Rev 3.00
October 19, 2009
Page 3 of 12
ISL54051, ISL54052
Electrical Specifications - 5V Supply Test Conditions: V+ = +4.5V to +5.5V, GND = 0V, V
= 2.4V, V = 0.8V (Note 9),
INL
Unless Otherwise Specified. Boldface limits apply over the operating temperature
INH
range, -40°C to +85°C. (Continued)
TEMP
MIN
MAX
PARAMETER
TEST CONDITIONS
(°C) (Notes 10, 11) TYP (Notes 10, 11) UNITS
COM ON Capacitance,
V+ = 4.5V, f = 1MHz, V or V = V
(See Figure 5)
= 0V
25
-
48
-
pF
NO NC COM
C
COM(ON)
POWER SUPPLY CHARACTERISTICS
Power Supply Range
Full
25
1.8
-
0.075
-
5.5
0.1
2.5
V
Positive Supply Current, I+ V+ = 5.5V, V = 0V or V+
IN
-
µA
µA
Full
-
DIGITAL INPUT CHARACTERISTICS
Input Voltage Low, V
Full
Full
Full
-
-
-
-
0.8
-
V
V
INL
Input Voltage High, V
2.4
-0.1
INH
, I
Input Current, I
INH INL
V+ = 5.5V, V = 0V or V+
IN
0.1
µA
Electrical Specifications - 3V Supply Test Conditions: V+ = +2.7V to +3.6V, GND = 0V, V
= 1.4V, V
INL
= 0.5V (Note
INH
9), Unless Otherwise Specified. Boldface limits apply over the operating tem-
perature range, -40°C to +85°C.
TEMP
MIN
MAX
PARAMETER
TEST CONDITIONS
(°C) (Notes 10, 11) TYP (Notes 10, 11) UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range,
0
-
V+
V
V
ANALOG
ON-Resistance, r
(TDFN)
,
,
V+ = 3V, I
COM
= 100mA, V
NO
or V
or V
or V
= 0V
= 0V
= 0V
25
Full
25
-
-
-
-
-
-
1.1
-
1.2
1.5
1.3
ON
NC
NC
NC
to V+, (See Figure 4, Note 13)
ON-Resistance, r
(SOT-23)
V+ = 3V, I
COM
to V+, (See Figure 4, Note 13)
= 100mA, V
NO
1.1
-
ON
Full
25
1.6
0.35
0.4
r
Flatness, r
FLAT(ON)
V+ = 3V, I
COM
to V+, (Notes 12, 13)
= 100mA, V
NO
0.33
-
ON
Full
DYNAMIC CHARACTERISTICS
Turn-ON Time, t V+ = 2.7V, V
or V
= 1.5V, R = 50,
25
Full
25
-
-
-
-
-
-
29
35
12
17
32
80
-
-
-
-
-
-
ns
ns
ns
ns
pC
dB
ON
NO
NC
L
C = 35pF (See Figure 1, Note 13)
L
Turn-OFF Time, t
OFF
V+ = 2.7V, V
NO
L
or V
= 1.5V, R = 50,
L
NC
C = 35pF (See Figure 1, Note 13)
Full
Charge Injection, Q
OFF Isolation
V
= 0V, R = 0,C = 1.0nF (See Figure 2) 25
G G L
R = 50, C = 5pF, f = 100kHz,
V
25
25
25
L
L
= 1V
(See Figure 3)
COM
RMS
NO or NC OFF Capacitance, f = 1MHz, V
NO
or V
= V
= 0V
= 0V
-
-
16
48
-
-
pF
pF
NC
COM
C
(See Figure 5)
OFF
COM ON Capacitance,
f = 1MHz, V
or V
= V
NO
(See Figure 5)
NC
COM
C
COM(ON)
DIGITAL INPUT CHARACTERISTICS
Input Voltage Low, V
Full
Full
Full
-
-
-
-
0.5
-
V
V
INL
Input Voltage High, V
1.4
-0.1
INH
Input Current, I
, I
V+ = 3.6V, V = 0V or V+
IN
0.1
µA
INH INL
FN6459 Rev 3.00
October 19, 2009
Page 4 of 12
ISL54051, ISL54052
Electrical Specifications - 1.8V SupplyTest Conditions: V+ = +1.8V, GND = 0V, V
= 1V, V = 0.4V (Note 4),
INL
Unless Otherwise Specified. Boldface limits apply over the operating tempera-
INH
ture range, -40°C to +85°C.
TEMP
MIN
MAX
PARAMETER
TEST CONDITIONS
(°C) (Notes 10, 11) TYP (Notes 10, 11) UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range,
Full
0
-
V+
V
V
ANALOG
ON-Resistance, r
V+ = 1.8V, I
COM
= 100mA, V
or
25
-
2.33
2.54
-
ON
NO
= 0V to V+ (See Figure 4, Note 13)
V
NC
DYNAMIC CHARACTERISTICS
Turn-ON Time, t V+ = 1.8V, V
Full
-
-
or V
NC
= 1.5V, R = 50,
25
Full
25
-
-
-
-
-
68
93
45
71
18
-
-
-
-
-
ns
ns
ns
ns
pC
ON
NO
L
C = 35pF (See Figure 1, Note 13)
L
Turn-OFF Time, t
V+ = 1.8V, V
NO
L
or V = 1.5V, R = 50,
NC L
OFF
C = 35pF (See Figure 1, Note 13)
Full
25
Charge Injection, Q
V
= V+/2, R = 0, C = 1.0nF
G G L
(See Figure 2)
DIGITAL INPUT CHARACTERISTICS
Input Voltage Low, V
Full
Full
-
-
-
0.4
-
V
V
INL
Input Voltage High, V
NOTES:
1
INH
9. V = input voltage to perform proper function.
IN
10. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this
data sheet.
11. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established
by characterization and are not production tested.
12. Flatness is defined as the difference between maximum and minimum value of ON-resistance over the specified analog signal
range.
13. Limits established by characterization and are not production tested.
FN6459 Rev 3.00
October 19, 2009
Page 5 of 12
ISL54051, ISL54052
Test Circuits and Waveforms
V+
V
t < 20ns
r
t < 20ns
f
INH
C
LOGIC
INPUT
50%
V
INL
t
V
OFF
OUT
NO OR NC
IN
SWITCH
INPUT
COM
SWITCH
INPUT
V
NX
0V
V
OUT
90%
90%
R
50
C
L
35pF
LOGIC
INPUT
L
GND
SWITCH
OUTPUT
t
ON
Repeat test for all switches. C includes fixture and stray
L
Logic input waveform is inverted for switches that have the
opposite logic sense.
capacitance.
R
L
----------------------------
V
= V
OUT
(NO or NC)
R
+ r
ON
L
FIGURE 1A. MEASUREMENT POINTS
FIGURE 1B. TEST CIRCUIT
FIGURE 1. SWITCHING TIMES
V+
C
V
R
OUT
G
COM
SWITCH
OUTPUT
NO OR NC
V
OUT
V
OUT
V
INH
V
GND
IN
G
ON
C
L
ON
LOGIC
INPUT
OFF
V
INL
LOGIC
INPUT
Q = V
x C
L
OUT
FIGURE 2A. MEASUREMENT POINTS
FIGURE 2. CHARGE INJECTION
FIGURE 2B. TEST CIRCUIT
V+
V+
C
C
r
= V /100mA
1
ON
SIGNAL
GENERATOR
NO or NC
NO or NC
V
NX
100mA
IN
0V OR V+
V
OR V
INH
INL
IN
V
1
COM
COM
ANALYZER
GND
GND
R
L
FIGURE 3. OFF ISOLATION TEST CIRCUIT
FIGURE 4. r TEST CIRCUIT
ON
FN6459 Rev 3.00
October 19, 2009
Page 6 of 12
ISL54051, ISL54052
Test Circuits and Waveforms(Continued)
V+
C
V
NO OR NC
OR V
INH
IN
INL
IMPEDANCE
ANALYZER
COM
GND
FIGURE 5. CAPACITANCE TEST CIRCUIT
protecting the switch. These schottky diodes must be
sized to handle the expected fault current.
Detailed Description
The ISL54051 and ISL54052 are bidirectional, single
pole/single throw (SPST) analog switches. They offer
precise switching capability from a single 1.8V to 5.5V
supply with low ON-resistance and high speed operation.
With a single supply of 5V the typical ON-resistance is
only 0.8, with a typical turn-on and turn-off time
OPTIONAL
SCHOTTKY
DIODE
V+
OPTIONAL
PROTECTION
of: t
= 24ns, t = 10ns. The devices are especially
RESISTOR
IN
V
ON
OFF
X
well suited for portable battery powered equipment due
to their low operating supply voltage (1.8V), low power
consumption (5.5µW), low leakage currents (300nA
max) and tiny µTDFN and SOT-23 packages.
V
NX
COM
GND
The ISL54051 is a single normally open (NO) SPST
analog switch. The ISL54052 is a single normally closed
(NC) SPST analog switch.
OPTIONAL
SCHOTTKY
DIODE
FIGURE 6. OVERVOLTAGE PROTECTION
Supply Sequencing and Overvoltage
Protection
Power-Supply Considerations
With any CMOS device, proper power supply sequencing
is required to protect the device from excessive input
currents, which might permanently damage the IC. All
I/O pins contain ESD protection diodes from the pin to
V+ and to GND (see Figure 6). To prevent forward
biasing these diodes, V+ must be applied before any
input signals, and the input signal voltages must remain
between V+ and GND. If these conditions cannot be
guaranteed, then one of the following two protection
methods should be employed.
The construction of the ISL54051 and the ISL54052 is
typical of most single supply CMOS analog switches in
that they have two supply pins: V+ and GND. V+ and
GND drive the internal CMOS switches and set their
analog voltage limits. Unlike switches with a 4.5V
maximum supply voltage, the ISL54051 and the
ISL54052’s 5.5V maximum supply voltage provides
plenty of room for the 10% tolerance of 4.3V supplies, as
well as room for overshoot and noise spikes.
Logic inputs can easily be protected by adding a 1k
resistor in series with the input (see Figure 6). The
resistor limits the input current below the threshold that
produces permanent damage, and the sub-microamp
input current produces an insignificant voltage drop
during normal operation.
The minimum recommended supply voltage is 1.8V but
the part will operate with a supply below 1.8V. It is
important to note that the input signal range, switching
times, and ON-resistance degrade at lower supply
voltages. Refer to the “Electrical Specifications” tables
starting on page 3 and “Typical Performance Curves”
starting on page 8 for details.
This method is not acceptable for the signal path inputs.
Adding a series resistor to the switch input defeats the
purpose of using a low rON switch. Connecting schottky
diodes to the signal pins (as shown in Figure 6) will shunt
the fault current to the supply or to ground thereby
V+ and GND also power the internal logic and level
shiftier. The level shiftier converts the input logic levels to
switched V+ and GND signals to drive the analog switch
gate terminals.
FN6459 Rev 3.00
October 19, 2009
Page 7 of 12
ISL54051, ISL54052
This family of switches cannot be operated with bipolar
supplies because the input switching point becomes
negative in this configuration.
systems, decreasing approximately 20dB per decade as
frequency increases. Higher load impedances decrease
off isolation and crosstalk rejection due to the voltage
divider action of the switch OFF impedance and the load
impedance.
Logic-Level Thresholds
This switch family is 1.8V CMOS compatible (0.5V and
1.4V) over a supply range of 2V to 5V (see Figure 13). At
Leakage Considerations
5V the V level is about 1.2V. This is still below the 1.8V
CMOS guaranteed high output minimum level of 1.4V,
but noise margin is reduced.
Reverse ESD protection diodes are internally connected
between each analog-signal pin and both V+ and GND.
One of these diodes conducts if any analog signal
exceeds V+ or GND.
IH
The digital input stages draw supply current whenever
the digital input voltage is not at one of the supply rails.
Driving the digital input signals from GND to V+ with a
fast transition time minimizes power dissipation.
Virtually all the analog leakage current comes from the
ESD diodes to V+ or GND. Although the ESD diodes on a
given signal pin are identical and therefore fairly well
balanced, they are reverse biased differently. Each is
biased by either V+ or GND and the analog signal. This
means their leakages will vary as the signal varies. The
difference in the two diode leakages to the V+ and GND
pins constitutes the analog-signal-path leakage current.
All analog leakage current flows between each pin and
one of the supply terminals, not to the other switch
terminal. This is why both sides of a given switch can
show leakage currents of the same or opposite polarity.
There is no connection between the analog signal paths
and V+ or GND.
High-Frequency Performance
In 50 systems, the ISL54051 and the ISL54052 have a
-3dB bandwidth of 190MHz (see Figure 14). The
frequency response is very consistent over a wide V+
range, and for varying analog signal levels.
An OFF switch acts like a capacitor and passes higher
frequencies with less attenuation, resulting in signal
feedthrough from a switch’s input to its output. Off
isolation is the resistance to this feedthrough. Figure 15
details the high off isolation rejection provided by this
family. At 100kHz, off isolation is about 80dB in 50
Typical Performance Curves T = +25°C, Unless Otherwise Specified
A
2.5
1.0
I
= 100mA
COM
V+ = 1.8V
0.9
0.8
0.7
0.6
0.5
0.4
2.0
1.5
+85°C
+25°C
V+ = 2.7V
1.0
0.5
0
V+ = 4.5V
V+ = 3V
V+ = 5V
-40°C
0.3
0.2
V+ = 5V
I
= 100mA
COM
0
1
2
3
4
5
0
1
2
3
4
5
V
(V)
V
(V)
COM
COM
FIGURE 7. ON-RESISTANCE vs SUPPLY VOLTAGE vs
SWITCH VOLTAGE
FIGURE 8. ON-RESISTANCE vs SWITCH VOLTAGE
FN6459 Rev 3.00
October 19, 2009
Page 8 of 12
ISL54051, ISL54052
Typical Performance Curves T = +25°C, Unless Otherwise Specified (Continued)
A
3.0
2.5
2.0
1.5
1.0
0.5
1.5
V+ = 1.8V
= 10mA
I
COM
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
+85°C
+25°C
-40°C
+85°C
+25°C
-40°C
1.5
V+ = 3.0V
= 100mA
0.6
0.5
I
COM
0
0.5
1.0
(V)
1.5
1.8
0
0.5
1.0
2.0
2.5
3.0
V
COM
V
(V)
COM
FIGURE 10. ON-RESISTANCE vs SWITCH VOLTAGE
FIGURE 9. ON-RESISTANCE vs SWITCH VOLTAGE
80
100
90
-40°C
80
70
60
50
40
30
20
10
0
60
-40°C
+25°C
40
+85°C
+25°C
20
0
+85°C
-40°C
-40°C
2.8
3.8
4.8
1.8
1.8
2.8
3.8
4.8
V+ (V)
V+ (V)
FIGURE 11. TURN-ON TIME vs SUPPLY VOLTAGE
FIGURE 12. TURN-OFF TIME vs SUPPLY VOLTAGE
1.6
1.4
1.2
GAIN
0
-1
-2
-3
V
INH
1.0
0.8
V
INL
0.6
0.4
0.2
V+ = 5.0V
R
= 50
= 0.2V
L
V
to 2V
IN
P-P P-P
2.0
2.5
3.0
3.5
4.0
V+ (V)
4.5
5.0
5.5
0.01k
0.1k
1M
10M
100M
1G
FREQUENCY (Hz)
FIGURE 13. DIGITAL SWITCHING POINT vs SUPPLY
VOLTAGE
FIGURE 14. FREQUENCY RESPONSE
FN6459 Rev 3.00
October 19, 2009
Page 9 of 12
ISL54051, ISL54052
Typical Performance Curves T = +25°C, Unless Otherwise Specified (Continued)
A
0
0
40
V+ = 1.8V to 5.5V
V+ = 3.0V
30
-20
-20
20
10
-40
-60
-40
0
ISOLATION
-10
-20
-30
-40
-50
-60
-60
V+ = 5V
V+ = 1.8V
-80
-80
V+ = 3.0V
-100
-120
-100
-120
0
1
2
3
4
5
1k
10k
100k
1M
10M
100M 500M
V
(V)
FREQUENCY (Hz)
COM
FIGURE 15. OFF ISOLATION
FIGURE 16. CHARGE INJECTION vs SWITCH
VOLTAGE
Die Characteristics
SUBSTRATE POTENTIAL (POWERED UP):
GND
TRANSISTOR COUNT:
57
PROCESS:
Submicron CMOS
FN6459 Rev 3.00
October 19, 2009
Page 10 of 12
ISL54051, ISL54052
Ultra Thin Dual Flat No-Lead Plastic Package (UTDFN)
L6.1.2x1.0A
A
E
B
6 LEAD ULTRA THIN DUAL FLAT NO-LEAD PLASTIC PACKAGE
MILLIMETERS
PIN 1
REFERENCE
D
SYMBOL
MIN
0.45
-
NOMINAL
MAX
0.55
0.05
NOTES
2X
0.10 C
A
A1
A3
b
0.50
-
-
-
2X
0.10 C
0.127 REF
-
TOP VIEW
0.15
0.95
1.15
0.20
0.25
1.05
1.25
5
DETAIL A
0.10 C
0.08 C
D
1.00
-
A
E
1.20
-
7X
e
0.40 BSC
-
C
A1 A3
L
0.30
0.40
0.35
0.40
0.50
-
SEATING
PLANE
SIDE VIEW
L1
N
0.45
-
4X
e
DETAIL B
6
3
-
2
5X
L
Ne
3
1
3
0
12
4
L1
Rev. 2 8/06
NOTES:
1. Dimensioning and tolerancing conform to ASME Y14.5-1994.
2. N is the number of terminals.
6
4
b 6X
0.10 C A B
3. Ne refers to the number of terminals on E side.
4. All dimensions are in millimeters. Angles are in degrees.
0.05 C
NOTE 3
BOTTOM VIEW
5. Dimension b applies to the metallized terminal and is measured
between 0.15mm and 0.30mm from the terminal tip.
0.1x45°
CHAMFER
6. The configuration of the pin #1 identifier is optional, but must be
located within the zone indicated. The pin #1 identifier may be
either a mold or mark feature.
7. Maximum package warpage is 0.05mm.
8. Maximum allowable burrs is 0.076mm in all directions.
9. JEDEC Reference MO-255.
A3
A1
10. For additional information, to assist with the PCB Land Pattern
Design effort, see Intersil Technical Brief TB389.
DETAIL A
DETAIL B PIN 1 LEAD
1.00
1.40
0.20
0.30
0.35
0.45
0.20
0.40
10
LAND PATTERN
FN6459 Rev 3.00
October 19, 2009
Page 11 of 12
ISL54051, ISL54052
SOT-23 Package Family
MDP0038
SOT-23 PACKAGE FAMILY
e1
D
A
MILLIMETERS
SOT23-5
6
4
N
SYMBOL
SOT23-6
1.45
0.10
1.14
0.40
0.14
2.90
2.80
1.60
0.95
1.90
0.45
0.60
6
TOLERANCE
MAX
A
A1
A2
b
1.45
0.10
1.14
0.40
0.14
2.90
2.80
1.60
0.95
1.90
0.45
0.60
5
±0.05
E1
E
±0.15
2
3
±0.05
0.15
2X
C
D
c
±0.06
1
2
3
0.20
2X
C
D
Basic
5
e
E
Basic
E1
e
Basic
0.20
C
A-B
D
M
B
b
NX
Basic
e1
L
Basic
±0.10
L1
N
Reference
Reference
Rev. F 2/07
0.15
2X
C
A-B
1
3
D
NOTES:
C
1. Plastic or metal protrusions of 0.25mm maximum per side are not
included.
A2
SEATING
PLANE
2. Plastic interlead protrusions of 0.25mm maximum per side are not
included.
A1
0.10
NX
C
3. This dimension is measured at Datum Plane “H”.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
5. Index area - Pin #1 I.D. will be located within the indicated zone
(SOT23-6 only).
6. SOT23-5 version has no center lead (shown as a dashed line).
(L1)
H
A
GAUGE
PLANE
0.25
c
+3°
-0°
L
0°
© Copyright Intersil Americas LLC 2007-2009. All Rights Reserved.
All trademarks and registered trademarks are the property of their respective owners.
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such
modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are
current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its
subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN6459 Rev 3.00
October 19, 2009
Page 12 of 12
相关型号:
ISL54054
Ultra Low ON-Resistance, Low Voltage, Single Supply, Single SPST/1:2 Distribution Analog Switch
INTERSIL
ISL54054IHZ-T
Ultra Low ON-Resistance, Low Voltage, Single Supply, Single SPST/1:2 Distribution Analog Switch
INTERSIL
ISL54054IRUZ-T
Ultra Low ON-Resistance, Low Voltage, Single Supply, Single SPST/1:2 Distribution Analog Switch
INTERSIL
ISL54054_0709
Ultra Low ON-Resistance, Low Voltage, Single Supply, Single SPST/1:2 Distribution Analog Switch
INTERSIL
ISL54055
Ultra Low ON-Resistance, Low Voltage, Single Supply, Single SPST/1:2 Distribution Analog Switch
INTERSIL
ISL54055IRUZ-T
Ultra Low ON-Resistance, Low Voltage, Single Supply, Single SPST/1:2 Distribution Analog Switch
INTERSIL
©2020 ICPDF网 联系我们和版权申明