RP10-2405DEP [RECOM]
10 Watt 2” x 1” Package Single & Dual Output; 10瓦2 “× 1 ”包单，双输出
| 型号： | RP10-2405DEP |
| 厂家： | 
RECOM INTERNATIONAL POWER |
| 描述： | 10 Watt 2” x 1” Package Single & Dual Output |
| 文件： | 总5页 (文件大小：101K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
● 2:1 Wide Input Voltage Range
● 10 Watts Output Power
● 1.6kVDC Isolation
POWERLINE
Features
DC/DC-Converter
● UL Certified
● Fixed Operating Frequency
● Six-Sided Continuous Shield
● Standard 50.8 x25.4x10.2mm Package
● Efficiency to 86%
RP10-
S_DE
Series
10 Watt
Selection Guide 12V, 24V and 48V Input Types
2” x 1” Package
Single & Dual
Output
Part Number
Input
Range
Output
Voltage
Output
Current
Input (4)
Current
Efficiency(5) Capacitive(6)
Load max.
VDC
VDC
3.3
5
mA
2000
2000
830
mA
724
1082
1064
1088
362
534
519
523
183
260
253
258
1068
1053
1041
548
520
520
267
254
260
%
µF
RP10-123.3SE
RP10-1205SE
RP10-1212SE
RP10-1215SE
RP10-243.3SE
RP10-2405SE
RP10-2412SE
RP10-2415SE
RP10-483.3SE
RP10-4805SE
RP10-4812SE
RP10-4815SE
RP10-1205DE
RP10-1212DE
RP10-1215DE
RP10-2405DE
RP10-2412DE
RP10-2415DE
RP10-4805DE
RP10-4812DE
RP10-4815DE
9-18
80
81
82
81
80
82
84
84
79
84
86
85
82
83
84
80
84
84
82
86
84
6800
4700
690
470
6800
4700
690
470
6800
4700
690
470
680
330
110
680
330
110
680
330
110
9-18
9-18
12
15
3.3
5
9-18
670
18-36
18-36
18-36
18-36
36-75
36-75
36-75
36-75
9-18
2000
2000
830
12
15
3.3
5
670
2000
2000
830
UL-60950-1 Certified
12
15
5
670
1000
416
9-18
12
15
5
9-18
333
18-36
18-36
18-36
36-75
36-75
36-75
1000
416
12
15
5
333
1000
416
12
15
333
* add suffix /MM2 for higher efficiencies and extended temperature range.
* add /PP for CTRL function with Positive Logic (1=ON, 0=OFF)
* add /NN for CTRL function with Negative Logic (0=ON, 1=OFF)
Description
The E-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all
Telecom and safety applications where approved isolation is required.
They also meet UL 1950 and CSA 950 standards (9)
.
www.recom-international.com
July-2006
219
POWERLINE
RP10-S_DE
Series
DC/DC-Converter
Derating-Graph (Ambient Temperature)
RP10-2405SE
RP10-2405SE With Heat Sink
125
100
125
100
75
75
50
Natural Convection
Natural Convection
50
25
0
25
0
-25
-10 0
50 60 70 80 90 100
81
-25
-10 0
50 60 70 80 90 100
79
Ambient Temperature Range (°C)
Ambient Temperature Range (°C)
RP10-2405DE
RP10-2405DE With Heat Sink
125
125
100
75
100
75
Natural Convection
Natural Convection
50
50
25
0
25
0
-25
-10 0
50 60 70 80 90 100
79
-25
-10 0
50 60 70 80 90 100
83
Ambient Temperature Range (°C)
Ambient Temperature Range (°C)
RP10-4805SE
RP10-2405SE_DE/M1
125
125
100
75
100
75
Natural Convection
Natural Convection
50
50
25
0
25
0
-25 -10 0
50 60 70 80 90 100
85
-25
-10 0
50 60
80 90 100
-40
70
Ambient Temperature Range (°C)
Ambient Temperature Range (°C)
RP10-4805SE/M1
RP10-2405SE_DE/M1 With Heat Sink
125
100
75
125
100
75
Natural Convection
Natural Convection
50
50
25
0
25
0
-40
-40 -25 -10 0
50 60 70 80 90 100
85
-25 -10 0
50 60 70 80 90 100
88
Ambient Temperature Range (°C)
Ambient Temperature Range (°C)
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a
part-number not shown here please contact our technical customer service at info@recom-development.at
July-2006
220
www.recom-international.com
POWERLINE
RP10-S_DE
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
12V nominal input
24V nominal input
48V nominal input
9-18VDC
18-36VDC
36-75VDC
Input Filter
Pi Type
Input Surge Voltage (100 ms max.)
12V Input
24V Input
48V Input
36VDC
50VDC
100VDC
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Start Up Time (nominal Vin and constant resistor load)
30mAp-p
20ms typ.
Remote ON/OFF (Optional. See Note 7)
(Positive logic)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Nominal input
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3.5V < Vr < 12V
20mA
(Negative logic)
Remote OFF input current
Output Power
10W max.
Output Voltage Accuracy (full Load and nominal Vin)
Minimum Load (see Note 1)
2%
10% of full load
1%
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Single
Dual
1%
2%
Cross Regulation (asymmetrical load 25%/100% full load)
Ripple and Noise (20MHz bandwith)
5%
Single
Dual
50mVp-p
75mVp-p
Temperature Coefficient
0.02%/°C max.
500µs
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp
3.3V output
3.9V
5V output
12V output
6.2V
15V
15V output
18V
Over Load Protection (% of full load at nominal Vin)
Short Circuit Protection
150% typ
Hiccup, automatic recovery
see „Selection Guide“ table
1600VDC min.
Efficiency
Isolation Voltage
Isolation Resistance
1 GΩ min.
Isolation Capacitance
300pF max.
Operating Frequency
300kHz typ.
Approved to Safety Standards (see Note 9)
UL 1950, EN60950
Operating Temperature Range
Standard
M1
-25°C to +85°C(with derating)
-40°C to +85°C(non derating)
(Reference Derating Curve) (see Note 10)
Maximum Case Temperature
Storage Temperature Range
+100°C
-55°C to +105°C
continued on next page
www.recom-international.com
July-2006
221
POWERLINE
RP10-S_DE
Series
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Thermal Impedance
(see Note 8)
Natural convection
12°C/Watt
Natural convection with Heat Sink
10°C/Watt
MIL-STD-810D
Thermal Shock
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
5% to 95% RH
Relative Humidity
Case Material
Base Material
Potting Material
Nickel plated copper
Non-conductive black plastic
Epoxy (UL94-V0)
Conducted Emissions (see Note 11)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
EN55022
EN55022
Level A
Level A
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Surge
Conducted Immunity
Weight
27g
50.8 x 25.4 x 10.2mm
1976 x 103 hours
Dimensions
MTBF (see Note 2)
Notes :
1. The RP10 (W) series required a minimum 10% loading on the output to maintain specified regulation.
Operation under no-load condition will not damage these devices, however they may not meet all listedspecification.
2. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is marked with suffix-P (eg. RP10-2405SE/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP10-2405SE/N).
If no suffix is specified, the control pin will be omitted.
8. Heat sink is optional and P/N: 7G-0020A.
9. The M1 version (RP10-xxxxSE/M1, RP10-xxxxDE/M1) does not carry the UL certification.
10.M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version.
11. See application notes for EMI-filtering.
July-2006
222
www.recom-international.com
POWERLINE
RP10-S_DE
Series
DC/DC-Converter
Package Style and Pinning (mm)
3rd angle
projection
50.80
25.40
10.20
dia.
1.0
5.6
2.50
5.10
15.20
20.30
Pin Connections
Pin #
1
2
3
4
5
6*
Single
+Vin
-Vin
+Vout
No Pin
-Vout
CTRL*
Dual
+Vin
-Vin
+Vout
Com
3
4
5
10.20
10.20
Bottom View
1
2
-Vout
CTRL*
12.70
6
*Optional. See Note 7.
Pin Pitch Tolerance 0.35 mm
www.recom-international.com
July-2006
223
相关型号：
©2020 ICPDF网 联系我们和版权申明