885071 [QORVO]
2.4 GHz WLAN/BT LTE Co-Existence Filter;
| 型号： | 885071 |
| 厂家： | 
Qorvo |
| 描述： | 2.4 GHz WLAN/BT LTE Co-Existence Filter 局域网 LTE WLAN 无线局域网 |
| 文件： | 总8页 (文件大小：368K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
885071
®
2.4 GHz WLAN/BT LTE Co-Existence Filter
General Description
The 885071 is a high-performance, high power Bulk
Acoustic Wave (BAW) band-pass filter with extremely
steep skirts, simultaneously exhibiting low loss in the
WiFi band and high band-edge & near-in rejection.
The 885071 enables coexistence of WiFi and LTE
signals within the same device or in close proximity to
one another. Its unique power handling capability allows
for implantation into access points small cell base
The 885071 uses common module packaging
techniques to achieve the industry standard 1.4 x 1.2 x
0.46 mm footprint. The filter exhibits excellent power
Handling capabilities.
CSP-5CT package: 1.4 x 1.2 x 0.46 mm
Product Features
• Low Loss in WLAN band with extended upper
corner for inclusion of Bluetooth
• High Rejection in B7/B41 bands
• Industry leading small size: 1.4 x 1.2 x 0.46 mm
• Performance over −40 to +95 ºC
• Ceramic chip-scale Package (CSP)
• Hermetically sealed
Functional Block Diagram
Gnd
Output
Gnd
5
2
4
3
Pb
• RoHS compliant, Pb-free
Input
1
Applications
• WiFi band pass filter that enables the coexistence of
Gnd
3G/4G/LTE/TD-LTE & WiFi signals
Top View
• High-power WLAN Access Points and Small Cells
• Sideband filtering of WiFi signal emissions
• Smart Meters and 2.4 GHz ISM applications
Set Top Box, Gateways and WiFi Routers
Pin Configuration - Single Ended
Pin No.
1
Label
Input
Ordering Information
4
Output
Ground
Part No.
885071
Description
Packaged part
Evaluation board
2,3,5
885071-EVB
Standard T/R size = 10,000 units/reel
DATA SHEET: REV I
DEC 2017 Subject to change without notice
- 1 of 8
www.qorvo.com
885071
®
2.4 GHz WLAN/BT LTE Co-Existence Filter
Absolute Maximum Ratings
MTTF
Input Power
Parameter
Rating
-55 to +125ꢀ°C
+ꢀ70ꢀ°C
+ꢀ85ꢀ°C
+ꢀ95ꢀ°C
(2)
Storage Temperature (1)
Operable Temperature (2)
ꢀ183 MꢀHours 23.5 MꢀHours 6.56 Mꢀhours
67.5 M Hours 8.65 M Hours 2.41 M Hours
24.8 M Hours 3.18 M Hours 0.89 M Hours
-40 to +95ꢀ°C
+ꢀ24 dBm
1. Operation of this device outside the parameter
ranges given may cause permanent damage.
2. Input Power with WLAN OFDM signal applied.
+ 26 dBm
+ 28 dBm
Electrical Specifications (1)(6)
Conditions unless otherwise noted: Device Temperature = 0°C to +70°C.
Parameter (2)
Conditions
Min Typ (+25°C) Max Units
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2476.5 MHz (WiFi Ch.1-12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
1.6
1.3
1.5
1.7
1.9
1.0
1.0
0.8
0.8
1.7
1.9
1.8
160
1.9
1.7
2.0
2.2
2.6
1.3
1.2
1.0
2.3
4.3
2.1
3.0
200
Insertion Loss (3)
-
dB
Amplitude Variation
Input/Output VSWR
-
dB
-
-
-
Impulse Response Length (4) 2401 – 2483 MHz
ns
100 – 2300 MHz
37
50
32
32
56
48
49
45
44
37
31
39
53
55
55
57
57
54
49
47
48
38
-
-
-
-
-
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
2300 – 2370 MHzꢀ(5)
2496 – 2501 MHz (+25 to +70˚C)ꢀ(5)
2496 – 2501 MHz (0˚C to +25˚C)ꢀ(5)
2500 – 2505 MHzꢀ(+25 to +70˚C)ꢀ(5)
2500 – 2505 MHzꢀ(0˚C to +25˚C)ꢀ(5)
2505 – 2570 MHz (5)
Attenuation
2570 – 2620 MHz (5)
2620 – 2690 MHz (5)
4800 – 5000 MHz
7200 – 7500 MHz
2nd Harmonics
CW Tone = 2442 MHz @ 22.5 dBm
CW Tone = 2442 MHz @ 22.5 dBm
Single-ended
-
-
–
60
138
50
-
-
–
dBc
dBc
Ω
3rd Harmonics
Source/Load Impedanceꢀ(7)
Notes:
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance
over temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over 19 MHz window for the indicated band at the specified
temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with ±3 % tolerance will be necessary to achieve the stated specifications.
7. This is the optimum impedance in order to achieve the performance shown.
DATA SHEET: REV I
DEC 2017 Subject to change without notice
- 2 of 8
www.qorvo.com
885071
®
2.4 GHz WLAN/BT LTE Co-Existence Filter
Electrical Specifications (1)(6)
Conditions unless otherwise noted: Device Temperature = −30°C to +85°C.
Parameter (2)
Conditions
Min Typ (+25°C) Max Units
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2476.5 MHz (WiFi Ch.1-12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
1.6
1.3
1.5
1.7
1.9
1.0
1.0
0.8
0.8
1.7
1.9
1.8
160
39
1.9
1.7
2.0
2.2
2.8
1.3
1.2
1.0
2.4
5.2
2.1
3.2
200
-
Insertion Loss (3)
-
dB
Amplitude Variation
Input/Output VSWR
-
-
dB
-
Impulse Response Length (4) 2401 – 2483 MHz
100 – 2300 MHz
-
ns
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBc
dBc
Ω
37
50
32
18
50
38
49
45
44
37
31
-
2300 – 2370 MHzꢀ(5)
53
-
2496 – 2501 MHz (+25 to +85˚C)ꢀ(5)
55
-
2496 – 2501 MHz (-30 to +25˚C)ꢀ(5)
2500 – 2505 MHz (+25 to +85˚C)ꢀ(5)
2500 – 2505 MHz (-30 to +25˚C) (5)
2505 – 2570 MHz (5)
55
-
57
-
Attenuation
57
-
54
-
2570 – 2620 MHz (5)
49
-
2620 – 2690 MHz (5)
47
-
48
-
4800 – 5000 MHz
7200 – 7500 MHz
CW Tone = 2442 MHz @ 22.5 dBm
CW Tone = 2442 MHz @ 22.5 dBm
Single-ended
38
-
2nd Harmonics
60
-
3rd Harmonics
-
–
138
50
-
–
Source/Load Impedanceꢀ(7)
Notes:
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical
compliance over temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over 19 MHz window for the indicated band at the specified
temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with ±3 % tolerance will be necessary to achieve the stated specifications.
7. This is the optimum impedance in order to achieve the performance shown.
DATA SHEET: REV I
DEC 2017 Subject to change without notice
- 3 of 8
www.qorvo.com
885071
®
2.4 GHz WLAN/BT LTE Co-Existence Filter
Electrical Specifications (1)(6)
Conditions unless otherwise noted: Device Temperature = −40°C to +95°C.
Parameter (2)
Conditions
Min Typ (+25°C) Max Units
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2476.5 MHz (WiFi Ch.1-12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
1.6
1.3
1.5
1.7
1.9
1.0
1.0
0.8
0.8
1.7
1.9
1.8
160
39
1.9
1.7
2.1
2.3
2.9
1.3
1.2
1.0
2.5
5.7
2.1
3.5
200
-
Insertion Loss (3)
-
dB
Amplitude Variation
Input/Output VSWR
-
-
dB
-
Impulse Response Length (4) 2401 – 2483 MHz
100 – 2300 MHz
-
ns
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBc
dBc
Ω
37
50
32
12
48
32
49
45
44
37
31
-
2300 – 2370 MHzꢀ(5)
53
-
2496 – 2501 MHz (+25 to +95˚C)ꢀ(5)
55
-
2496 – 2501 MHz (-40 to +25˚C) ꢀ(5)
2500 – 2505 MHz (+25 to +95˚C)ꢀ(5)
2500 – 2505 MHz (-40 to +25˚C)ꢀ(5)
2505 – 2570 MHz (5)
55
-
57
-
Attenuation
57
-
54
-
2570 – 2620 MHz (5)
49
-
2620 – 2690 MHz (5)
47
-
48
-
4800 – 5000 MHz
7200 – 7500 MHz
CW Tone = 2442 MHz @ 22.5 dBm
CW Tone = 2442 MHz @ 22.5 dBm
Single-ended
38
-
2nd Harmonics
60
-
3rd Harmonics
-
–
138
50
-
–
Source/Load Impedanceꢀ(7)
Notes:
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical
compliance over temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over 19 MHz window for the indicated band at the specified
temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with ±3 % tolerance will be necessary to achieve the stated specifications.
7. This is the optimum impedance in order to achieve the performance shown.
DATA SHEET: REV I
DEC 2017 Subject to change without notice
- 4 of 8
www.qorvo.com
885071
®
2.4 GHz WLAN/BT LTE Co-Existence Filter
Evaluation Board
Notes:
1. Matching component values shown are for the specified TriQuint evaluation board. Value adjustment may be required in
end user product circuits depending on component manufacturer and PCB material.
2. PCB: .500 x.500 x .062; Construction: ½ oz. Cu Top Layer; TLY-5A (.0075) ½ oz. Cu Middle Layer, FR4; ½ oz. Cu Bottom
Layer. (dimensions are in inches)
Bill of Material
Reference Des.
Value Description
Manuf. Part Number
L1
7.5ꢀnH
8.2ꢀnH
N/A
0201 chip inductors ±3%
MuRata
LQP03TN7N5H02
L2
0201 chip inductors ±3%
SMA connector
3-layer
MuRata
LQP03TN8N2H02
SMA
PCB
Radiall USA 9602-1111-018
960999
N/A
Multiple
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. This drawing specifies the mounting pattern used on the TriQuint
evaluation board for this product. Some modification may be necessary
to suit end user assembly materials and processes.
DATA SHEET: REV I
DEC 2017 Subject to change without notice
- 5 of 8
www.qorvo.com
885071
®
2.4 GHz WLAN/BT LTE Co-Existence Filter
Performance Plots
Frequency Response
Passband Response
0
-10
-20
-30
-40
-50
-60
-70
0
-1
-2
d
B
d
B
-3
-4
-5
-6
2370
2405
2440
2475
2510
2200
2320
2440
2560
2680
Frequency (MHz)
Frequency (MHz)
WidebandResponse
Input / Output VSWR
L
i
n
0
-10
-20
-30
-40
-50
-60
-70
3
2.5
2
M
a
g
1.5
1
d
2370
2405
2440
2475
2510
B
L
i
n
3
2.5
2
M
a
g
1.5
1
2370
2405
2440
2475
2510
500
1500
2500
3500
4500
5500
6500
7500
Frequency (MHz)
Frequency (MHz)
Input Smith Chart
Output Smith Chart
1
1
0.8
0.6
0.4
0.2
0.8
0.6
0.4
0.2
0
0
0
0
-1
-0 .5
0.5
1
-1
-0 .5
0.5
1
-0 .2
-0 .4
-0 .6
-0 .8
-1
-0 .2
-0 .4
-0 .6
-0 .8
-1
DATA SHEET: REV I
DEC 2017 Subject to change without notice
- 6 of 8
www.qorvo.com
885071
®
2.4 GHz WLAN/BT LTE Co-Existence Filter
Package Information, Marking and Dimensions
Package Style: CSP-5CT
Dimensions: 1.4 x 1.2 x 0.46 mm
Marking
code
MFG site
Date code
ID dot
A4 M
Body: Al2O3 ceramic
Lid: Kovar or Alloy 42, Au over Ni plated
Terminations: Au plating 0.5 - 1.0 μm, over a 2-6 μm Ni plating
W W Y
The date code consists of: WW = 2 digit week,
Y = last digit of year, M = manufacturing site code
0.46 NOM.
0.50 MAX.
1.40
1.25
0.50
Notes:
1. All dimensions shown are typical in millimeters.
2. Unless otherwise specified all tolerances are ±0.05mm
except length and width that are specified as ±ꢀ0.1mm.
3. An asterisk (*) in front of the marking code indicates
prototype.
1.20 0.325
0.25
0.90
0.25
Tape and Reel information
8.8
2.7
Ø330
Section A-A
4.0
ID dot
Ø1.5
A
1.75
3.5
2.0
0.3
8.0
Direction of travel
Ø102
1.73
1.47
Ø20.2
Ø13.0
2.0
4.0
Ø1.0
A
0.65
Standard T/R size=10,000 units/reel.
All dimensions are in millimeters.
DATA SHEET: REV I
DEC 2017 Subject to change without notice
- 7 of 8
www.qorvo.com
885071
®
2.4 GHz WLAN/BT LTE Co-Existence Filter
Handling Precautions
Parameter
Rating
Standard
ESDꢀ–ꢀHuman Body Model (HBM)
Class 1C ESDAꢁ/ꢁJEDEC JS-001
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharge Device Model (CDM) N/A
ESDA/JEDEC JS-002
Hermetic package
MSLꢀ–ꢀMoisture Sensitivity Level
N/A
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes:
• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free
Pb
• Qorvo Green
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information: Email: flapplication.engineering@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein, or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS
DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS
WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR
OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in
medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe
personal injury or death.
Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
DATA SHEET: REV I
DEC 2017 Subject to change without notice
- 8 of 8
www.qorvo.com
相关型号：
©2020 ICPDF网 联系我们和版权申明