885071-A-EVB [TRIQUINT]
2.4 GHz WLAN/BTLTE Co-Existence Filter;型号: | 885071-A-EVB |
厂家: | TRIQUINT SEMICONDUCTOR |
描述: | 2.4 GHz WLAN/BTLTE Co-Existence Filter 局域网 LTE WLAN 无线局域网 |
文件: | 总8页 (文件大小:1005K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
885071-A
2.4 GHz WLAN/BTLTE Co-Existence Filter
RFMD + TriQuint = Qorvo
Applications
Automotive Telematics and Infotainment
2.4ꢀGHz ISM Applications & Smart Energy
WiFi bandpass filter that enables the coexistence of
3G/4G/LTE/TD-LTE & WiFi signals
WLAN systems (Higher power applications)
WiFi in Outdoor Small Cells and Access Points
CSP-5CT package: 1.4 x 1.2 x 0.46 mm
Product Features
Functional Block Diagram
Qualified for automotive applications based on
AEC–Q200 standard
Top View
Gnd
Best in class rejection in LTE B7/B41 bands
Industry leading small size: 1.4 x 1.2 x 0.46 mm
Performance over −40ꢀ°C to +95 ºC
Ceramic chip-scale Package (CSP)
Hermetically sealed
Output
Gnd
5
2
4
3
Input
1
Pb
RoHS compliant, Pb-free
Low Loss in WLAN CH1-Ch13
Single-ended operation
Gnd
Top View
General Description
Pin Configuration
Pin No.
1
Label
Input
885071–A is a high-performance, high-power Bulk
Acoustic Wave (BAW) bandpass filter with extremely
steep skirts, simultaneously exhibiting low loss in the
WiFi band & high near-in rejection.
4
Output
Ground
2,3,5
885071ꢁ–ꢁA is specifically designed to enable
coexistence of WiFi and LTE signals within the same
device or in close proximity to one another. Its unique
power handling capability allows for implementation into
access points, small cell base stations, and other high
power ISM band applications.
Note:
1. Pin 1 must be used for input. The large signal
performance of this filter (power handling and
nonlinear response) is not symmetric
885071ꢁ–ꢁA uses advanced packaging techniques to
achieve an industry-leading 1.4 x 1.2 x 0.46 mm
Ordering Information
package.
The filter has met stringent automotive
Part No.
885071-A
Description
Packaged Part
Evaluation board
requirements derived from AEC-Q200 standard and is
suitable for use in infotainment and telematics
applications.
885071-A-EVB
Standard T/R size = 15,000 units/reel
Data Sheet: Rev. F 10-26-15
- 1 of 8 -
Disclaimer: Subject to change without notice
©2015 TriQuint
www.triquint.com
885071-A
2.4 GHz WLAN/BTLTE Co-Existence Filter
RFMD + TriQuint = Qorvo
Absolute Maximum Ratings (1)
Parameter
Rating
−ꢀ55ꢀ°C to +ꢀ125ꢀ°C
−ꢀ40ꢀ°C to +ꢀ95ꢀ°C
Storage Temperature (1)
Operable Temperature
1. Operation of this device outside the parameter ranges given may cause
permanent damage.
Electrical Specifications (1)
Conditions unless otherwise noted: Device Temperature = −30ꢀ°C to +85ꢀ°C.
Parameter (2)
Conditions
Min
Max
2.1
2.0
2.1
2.3
2.7
1.1
1.3
1.3
1.6
3.7
2.4
2.3
Units
Typ
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2476.5 MHz (WiFi Ch.1-12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
1.8
1.7
1.7
1.8
2.0
0.7
0.8
0.9
0.6
1.4
1.9
1.8
Insertion Loss (3)
–
dB
Amplitude Variation
Input/Output VSWR
–
dB
–
–
–
Impulse Response Length (4) 2401 – 2483 MHz
160
TBD
ns
100 – 2300 MHz
37
47
32
18
54
45
48
44
43
36
33
38
54
50
50
68
68
53
48
47
48
43
2300 – 2370 MHzꢀ(5)
2496 – 2501 MHz (+25ꢀ°C to +85ꢀ˚C)ꢀ(5)
2496 – 2501 MHz (−30ꢀ°C to +25ꢀ˚C)ꢀ(5)
2500 – 2505 MHz (+25ꢀ°C to +85ꢀ˚C)ꢀ(5)
2500 – 2505 MHz (−30ꢀ°C to +25˚C) (5)
2505 – 2570 MHz (5)
Attenuation
–
ꢁdB
2570 – 2620 MHz (5)
2620 – 2690 MHz (5)
4800 – 5000 MHz
7200 – 7500 MHz
2nd Harmonics
3rd Harmonics
CW Tone = 2442 MHz at 22.5ꢀdBm
CW Tone = 2442 MHz at 22.5ꢀdBm
–
–
60
–
–
dBc
dBc
138
Notes:
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over
temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over 19 MHz window in the indicated band at the specified temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with ±3 % tolerance will be necessary to achieve the stated specifications.
This is the optimum impedance in order to achieve the performance shown.
Data Sheet: Rev. F 10-26-15
- 2 of 8 -
Disclaimer: Subject to change without notice
©2015 TriQuint
www.triquint.com
885071-A
2.4 GHz WLAN/BTLTE Co-Existence Filter
RFMD + TriQuint = Qorvo
Electrical Specifications (1)
Conditions unless otherwise noted: Device Temperature = −40ꢀ°C to +95ꢀ°C.
Parameter (2)
Conditions
Min
Max
2.1
2.0
2.1
2.3
2.8
1.1
1.4
1.3
1.7
4.3
Units
Typ
1.8
1.7
1.7
1.8
2.0
0.7
0.8
0.9
0.6
1.4
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
Insertion Loss (3)
–
dB
Amplitude Variation
Input/Output VSWR
–
dB
2402.5 – 2476.5 MHz (WiFi Ch.1-12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
1.9
1.8
2.4
2.3
–
–
–
Impulse Response Length (4) 2401 – 2483 MHz
160
TBD
ns
100 – 2300 MHz
37
46
32
17
53
42
48
44
43
36
33
–
38
54
50
50
68
68
53
48
47
48
43
60
2300 – 2370 MHzꢀ(5)
2496 – 2501 MHz (+25ꢀ°C to +95ꢀ˚C)ꢀ(5)
2496 – 2501 MHz (−40ꢀ°C to +25˚C) ꢀ(5)
2500 – 2505 MHz (+25 °C to +95ꢀ˚C)ꢀ(5)
2500 – 2505 MHz (−40ꢀ°C to +25ꢀ˚C)ꢀ(5)
2505 – 2570 MHz (5)
Attenuation
–
ꢁdB
2570 – 2620 MHz (5)
2620 – 2690 MHz (5)
4800 – 5000 MHz
7200 – 7500 MHz
CW Tone = 2442 MHz at 22.5 dBm
2nd Harmonics
3rd Harmonics
–
–
dBc
dBc
CW Tone = 2442 MHz at 22.5 dBm
–
138
Notes:
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance
over temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over 19 MHz window in the indicated band at the specified
temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with ±3 % tolerance will be necessary to achieve the stated specifications.
This is the optimum impedance in order to achieve the performance shown.
Data Sheet: Rev. F 10-26-15
- 3 of 8 -
Disclaimer: Subject to change without notice
©2015 TriQuint
www.triquint.com
885071-A
2.4 GHz WLAN/BTLTE Co-Existence Filter
RFMD + TriQuint = Qorvo
Electrical Specifications (1)
Conditions unless otherwise noted: Device Temperature = 0ꢀ°C to +70ꢀ°C.
Parameter (2)
Conditions
Min
Max
2.1
2.0
2.0
2.2
2.6
1.0
1.3
1.3
1.3
3.2
2.4
2.3
Units
Typ
1.8
1.7
1.7
1.8
2.0
0.7
0.8
0.9
0.6
1.4
1.9
1.8
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2476.5 MHz (WiFi Ch.1-12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
Insertion Loss (3)
–
dB
Amplitude Variation
Input/Output VSWR
–
dB
–
–
–
Impulse Response Length (4) 2401 – 2483 MHz
160
TBD
ns
100 – 2300 MHz
37
47
32
27
59
53
48
44
43
36
33
–
38
54
50
50
68
68
53
48
47
48
43
60
2300 – 2370 MHzꢀ(5)
2496 – 2501 MHz (+25ꢀ°C to +70ꢀ˚C)ꢀ(5)
2496 – 2501 MHz (−0ꢀ°C to +25˚C) ꢀ(5)
2500 – 2505 MHz (+25ꢀ°C to +70ꢀ˚C)ꢀ(5)
2500 – 2505 MHz (−0ꢀ°C to +25ꢀ˚C)ꢀ(5)
2505 – 2570 MHz (5)
Attenuation
–
ꢁdB
2570 – 2620 MHz (5)
2620 – 2690 MHz (5)
4800 – 5000 MHz
7200 – 7500 MHz
CW Tone = 2442 MHz at 22.5 dBm
2nd Harmonics
3rd Harmonics
–
–
dBc
dBc
CW Tone = 2442 MHz at 22.5 dBm
–
138
Notes:
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance
over temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over 19 MHz window in the indicated band at the specified
temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with ±3 % tolerance will be necessary to achieve the stated specifications.
This is the optimum impedance in order to achieve the performance shown.
Data Sheet: Rev. F 10-26-15
- 4 of 8 -
Disclaimer: Subject to change without notice
©2015 TriQuint
www.triquint.com
885071-A
2.4 GHz WLAN/BTLTE Co-Existence Filter
RFMD + TriQuint = Qorvo
Evaluation Board
Notes:
1. Matching component values shown are for the specified TriQuint evaluation board. Value adjustment may be required in end
user product circuits depending on component manufacturer and PCB material.
2. PCB: .500 x.500 x .062; Construction: ½ oz Cu Top Layer; TLY-5A (.0075) ½ oz Cu Middle Layer, FR4; ½ oz Cu Bottom
Layer. (dimensions are in inches)
Bill of Material
Reference Des.
Value Description
Manuf. Part Number
L1
7.5ꢀnH
8.2ꢀnH
N/A
0201 chip inductor ±3ꢀ%
MuRata
LQP03TN7N5H02
L2
0201 chip inductor ±3ꢀ%
SMA connector
3-layer
MuRata
LQP03TN8N2H02
SMA
Radiall USA 9602-1111-018
Multiple 960999
PCB
N/A
Data Sheet: Rev. F 10-26-15
- 5 of 8 -
Disclaimer: Subject to change without notice
©2015 TriQuint
www.triquint.com
885071-A
2.4 GHz WLAN/BTLTE Co-Existence Filter
RFMD + TriQuint = Qorvo
Performance Plots
Test conditions unless otherwise noted: Temp.= +25ꢀ°C
Frequency Response
Passband Response
0
0
-10
-20
-1
-2
-30
d
d
-3
B
B
-40
-4
-50
-60
-70
-5
-6
2370
2405
2440
2475
2510
2200
2320
2440
2560
2680
Frequency (MHz)
Frequency (MHz)
WidebandResponse
Input / Output VSWR
L
i
n
0
-10
-20
-30
-40
-50
-60
-70
3
2.5
2
M
a
g
1.5
1
d
2370
2405
2440
2475
2510
B
L
i
n
3
2.5
2
M
a
g
1.5
1
2370
2405
2440
2475
2510
500
1500
2500
3500
4500
5500
6500
7500
Frequency (MHz)
Frequency (MHz)
Input Smith Chart
Output Smith Chart
1
1
0.8
0.6
0.4
0.2
0.8
0.6
0.4
0.2
0
0
0
0
-1
-0.5
0.5
1
-1
-0.5
0.5
1
-0.2
-0.4
-0.6
-0.8
-1
-0.2
-0.4
-0.6
-0.8
-1
Data Sheet: Rev. F 10-26-15
- 6 of 8 -
Disclaimer: Subject to change without notice
©2015 TriQuint
www.triquint.com
885071-A
2.4 GHz WLAN/BTLTE Co-Existence Filter
RFMD + TriQuint = Qorvo
Package Information, Marking and Dimensions
Package Style: CSP-5CT
Dimensions: 1.4 x 1.2 x 0.46ꢀmm
Marking
code
MFG site
Date code
Body: Al2O3 ceramic
Lid: Kovar or Alloy 42, Au over Ni plated
Terminations: Au plating 0.5 - 1.0ꢀμm, over a 2-6ꢀμm Ni plating
ID dot
B8 M
WWY
All dimensions shown are nominal in millimeters
All tolerances are ±0.05ꢀmm except overall length and width
ꢁ±0.10ꢀmm
0.46 NOM.
0.50 MAX.
1.40
1.25
0.50
The date code consists of: WW = 2 digit week,
Y = last digit of year, M = manufacturing site code
1.20 0.325
0.25
0.90
0.25
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. This drawing specifies the mounting pattern used on the TriQuint evaluation
board for this product. Some modification may be necessary to suit end
user assembly materials and processes.
Tape and Reel information
8.8
2.7
Ø330
Section A-A
4.0
ID dot
Ø1.5
A
1.75
3.5
2.0
0.3
8.0
Direction of travel
Ø102
1.73
1.47
Ø20.2
Ø13.0
2.0
4.0
Ø1.0
A
0.65
Standard T/R size=15,000 units/reel.
All dimensions are in millimeters.
Data Sheet: Rev. F 10-26-15
- 7 of 8 -
Disclaimer: Subject to change without notice
©2015 TriQuint
www.triquint.com
885071-A
2.4 GHz WLAN/BTLTE Co-Existence Filter
RFMD + TriQuint = Qorvo
Product Compliance Information
ESD Sensitivity Ratings
Solderability
Compatible with the latest version of J-STD-020, lead free
solder, 260°C
Caution! ESD-Sensitive Device
Refer to Soldering Profile for recommended guidelines.
ESD Rating: 1C
RoHs Compliance
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
Test:
Standard:
Human Body Model (HBM)
ESDA/JEDEC JS-001
ESD Rating: C3
Test:
Standard:
Charge Device Model (CDM)
ESDA/JEDEC JES-002
This product also has the following attributes:
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
MSL Rating
SVHC Free
Not applicable. Hermetic package.
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.triquint.com Tel: Tel: 877-800-8584
Email: customer.support@qorvo.com
For information about the merger of RFMD and TriQuint as Qorvo:
Web: www.qorvo.com
For technical questions and application information:
Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information
contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The
information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with
such information is entirely with the user. All information contained herein is subject to change without notice.
Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The
information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or
anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-
sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Data Sheet: Rev. F 10-26-15
- 8 of 8 -
Disclaimer: Subject to change without notice
©2015 TriQuint
www.triquint.com
相关型号:
©2020 ICPDF网 联系我们和版权申明