CP24C-T13 [PROTEC]
Trans Voltage Suppressor Diode, 200W, 24V V(RWM), Bidirectional, 5 Element, Silicon, PLASTIC PACKAGE-6;
| 型号： | CP24C-T13 |
| 厂家： | 
PROTEK DEVICES |
| 描述： | Trans Voltage Suppressor Diode, 200W, 24V V(RWM), Bidirectional, 5 Element, Silicon, PLASTIC PACKAGE-6 |
| 文件： | 总5页 (文件大小：84K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CP05
thru
CP24C
STANDARD CAPACITANCE TVS ARRAY
APPLICATIONS
✔ Ethernet - 10 Base T
✔ Cellular Phones
✔ Handheld Electronics
✔ FireWire & USB Interfaces
✔ Multiple I/O Ports or Power Supplie
IEC COMPATIBILITY (EN61000-4)
✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
SOT-23-6
✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line)
FEATURES
✔ 200 Watts Peak Pulse Power per Line (tp=8/20µs)
✔ Monolithic Design
✔ Available in Multiple Voltage Types Ranging From 5V to 24V
✔ Protect 4 Bidirectional Lines & 5 Unidirectional Lines
✔ ESD Protection > 25 kilovolts
✔ Low Clamping Voltage
✔ Unidirectional & Bidirectional Configurations
✔ Low Leakage Current
✔ RoHS Compliant
MECHANICAL CHARACTERISTICS
✔ Molded JEDEC SOT-23-6 Package
✔ Weight 16 milligrams (Approximate)
✔ Available in Lead-Free Pure-Tin Plating(Annealed)
✔ Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
✔ Consult Factory for Leaded Device Availability
✔ Flammability Rating UL 94V-0
✔ 8mm Tape and Reel Per EIA Standard 481
✔ Marking: Marking Code & Pin One Defined By DOT on Package
PIN CONFIGURATIONS
UNIDIRECTIONAL
BIDIRECTIONAL
6
5
4
6
5
4
1
2
3
1
2
3
05133.R9 3/08
1
www.protekdevices.com
CP05
thru
CP24C
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
SYMBOL
VALUE
200
UNITS
Watts
°C
PARAMETER
PPP
TL
Peak Pulse Power (tp = 8/20µs) - See Figure 1
Operating Temperature
-55 to 150
-55 to 150
Storage Temperature
TSTG
°C
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
(See Notes 1-3)
DEVICE
MARKING
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
(See Fig. 2)
MAXIMUM
CLAMPING
VOLTAGE
(See Fig. 2)
MAXIMUM
LEAKAGE
CURRENT
TYPICAL
CAPACITANCE
@ 1mA
V(BR)
VOLTS
@ IP = 1A
VC
VOLTS
@VWM
0V @ 1 MHz
VWM
VOLTS
@8/20µs
VC @ IPP
I
Cj
pF
µDA
CP05
CP05C
CP12
CP12C
CP15
CP15C
CP24
QRH
QRL
QRI
QRM
QRJ
QRN
QRK
QRO
5.0
5.0
6.0
6.0
9.8
9.8
19
19
24
24
43
43
11.8V @ 17.0A
11.8V @ 17.0A
28.3V @ 7.0A
28.3V @ 7.0A
45.0V @ 5.0A
45.0V @ 5.0A
65.0V @ 3.0A
65.0V @ 3.0A
20
20
1
1
1
1
1
1
70
70
50
50
30
30
25
25
12.0
12.0
15.0
15.0
24.0
24.0
13.3
13.3
16.7
16.7
26.7
26.7
CP24C
Note 1: Part numbers with an additional “C” suffix are bidirectional devices, i.e., CP05C.
Note 2: Unidirectional Only: Test between pin 1, 3, 4 and 6 to pin 2 or 5.
Note 3: Bidirectional Only: Test between pin 5 to 1 or 3 or 4 or 6. Electrical characteristics apply in both directions.
FIGURE 1
FIGURE 2
PEAK PULSE POWER VS PULSE TIME
PULSE WAVE FORM
10000
1000
100
120
TEST
t
f
WAVEFORM
Peak Value I
100
80
PP
PARAMETERS
t = 8µs
f
d
t
= 20µs
-t
e
200W 8/20µs
Waveform
60
40
t
= t I /2
d
PP
20
0
10
0.1
1
10
t
100
- Pulse Duration - µs
1000
10000
0
5
10
15
t - Time - µs
20
25
30
d
05133.R9 3/08
2
www.protekdevices.com
CP05
thru
CP24C
GRAPHS
FIGURE 3
FIGURE 4
POWER DERATING CURVE
OVERSHOOT & CLAMPING VOLTAGE FOR CP05
100
80
60
40
20
0
40
30
20
Peak Pulse Power
8/20µs
10
0
Average Power
0
25
50
75
100
125
150
TL - Lead Temperature - °C
ESD Test Pulse: 25 kilovolt, 1/30ns (waveshape)
FIGURE 5
16TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURRENT FOR CP05C
12
8
4
0
0
5
10
15
20
I
- Peak Pulse Current - Amps
PP
FIGURE 6
TYPICAL REVERSE VOLTAGE VS CAPACITANCE FOR CP05C
80
60
40
20
0
0
1
2
3
4
5
6
VR - Reverse Voltage - Volts
05133.R9 3/08
3
www.protekdevices.com
CP05
thru
CP24C
APPLICATION NOTE
The CP Series are TVS arrays designed to protect I/O or data lines from the damaging effects of ESD or EFT. This product series provides both
unidirectional and bidirectional protection, with a surge capability of 200 Watts PPP per line for an 8/20µs waveform and ESD protection > 25 kilovolts.
UNIDIRECTIONAL COMMON-MODE CONFIGURATION (Figure 1)
The CP Series provides up to four (4) lines of protection in a common-mode configuration as depicted in Figure 1.
Figure 1 - Unidirectional Configuration
Common-Mode I/O Port Protection
Circuit connectivity is as follows:
✔
✔
✔
✔
✔
Line 1 is connected to Pin 1.
Line 2 is connected to Pin 3.
Line 3 is connected to Pin 4.
Line 4 is connected to Pin 6.
Pin 5 is connected to ground.
LINE 1
LINE 2
✔
Pin 2 is not connected.
3
4
2
5
1
6
BIDIRECTIONAL COMMON-MODE CONFIGURATION (Figure 2)
The CPxxC Series provides up to four (4) lines of protection in a common-mode
configuration as depicted in Figure 2.
Circuit connectivity is as follows:
✔
✔
✔
✔
✔
Line 1 is connected to Pin 1.
Line 2 is connected to Pin 3.
Line 3 is connected to Pin 4.
Line 4 is connected to Pin 5.
Pin 6 is connected to ground.
LINE 3
LINE 4
✔
Pin 2 is not connected.
CIRCUIT BOARD LAYOUT RECOMMENDATIONS
Circuit board layout is critical for Electromagnetic
Compatibility (EMC) protection. The following
guidelines are recommended:
Figure 2 - Bidirectional Configuration
Common-Mode I/O Port Protection
✔
The protection device should be placed near the
input terminals or connectors, the device will
divert the transient current immediately before it
can be coupled into the nearby traces.
LINE 1
LINE 2
✔
✔
✔
The path length between the TVS device and
the protected line should be minimized.
3
4
2
5
1
6
All conductive loops including power and ground
loops should be minimized.
The transient current return path to ground
should be kept as short as possible to reduce
parasitic inductance.
✔
Ground planes should be used whenever
possible. For multilayer PCBs, use ground vias.
LINE 3
LINE 4
05133.R9 3/08
4
www.protekdevices.com
CP05
thru
CP24C
SOT-23-6 PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
SOT-23-6
D
E
4
3
5
2
6
1
PACKAGE DIMENSIONS
0° - 8°
K
INCHES
MILLIMETERS
DIM
MIN
MAX
MIN
MAX
L
J
A
B
C
D
E
G
J
K
L
M
2.80
1.50
0.90
0.30
0.85
0.90
0.09
2.60
0.0
3.05
1.75
1.30
0.40
1.05
1.45
0.20
3.00
0.15
0.60
0.110
0.059
0.036
0.012
0.033
0.036
0.003
0.102
0.0
0.120
0.070
0.051
0.016
0.040
0.057
0.008
0.118
0.006
0.024
M
B
A
G
0.30
0.012
C
MOUNTING PAD
NOTES
4
TYPICAL
1. Dimensioning and tolerances per ANSI Y14.5M, 1985.
2. Controlling Dimension: Inches
3. Dimensions are exclusive of mold flash and metal burrs.
DIM
Millimeters Inches
1
2
3
4
5
0.70
1.90
0.95
2.40
1.00
0.028
0.074
0.037
0.094
0.039
TAPE & REEL/BULK ORDERING NOMENCLATURE
3
1. Surface mount product is taped and reeled in accordance with EIA-481.
2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape,
i.e., CP05-T7
3. Suffix - LF = Lead-Free, Pure-Tin Plating,
i.e., CP05-LF-T7.
2
1
5
Outline & Dimensions: Rev 3 - 3/08, 06013
Tape & Reel Specifications (Dimensions in millimeters)
Reel Dia. Tape Width
178mm (7”) 8mm
A0
B0
K0
D
E
F
W
P0
P2
P
tmax
0.25
3.20 0.10 3.20 0.10 1.65 0.10 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10
P0
10 Pitches Cumulative
Tolerance on Tape. ± 0.2
P2
D
t
E
F
Pin 1
Indicated
by Dot
Top cover tape
K0
A0
W
B0
P
User Direction of Feed
ProTek Devices
COPYRIGHT © ProTek Devices 2007
2929 South Fair Lane, Tempe, AZ 85282
Tel: 602-431-8101 Fax: 602-431-2288
E-Mail: sales@protekdevices.com
Web Site: www.protekdevices.com
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is
the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such
products.
05133.R9 3/08
5
www.protekdevices.com
相关型号：
CP24C-T7
Trans Voltage Suppressor Diode, 200W, 24V V(RWM), Bidirectional, 5 Element, Silicon, PLASTIC PACKAGE-6
PROTEC
CP24C-T7-LF
Trans Voltage Suppressor Diode, 200W, 24V V(RWM), Bidirectional, 5 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC PACKAGE-6
PROTEC
CP2500
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2501
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2502
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2504
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2506
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2508
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
©2020 ICPDF网 联系我们和版权申明