CP24C-T7-LF [PROTEC]
Trans Voltage Suppressor Diode, 200W, 24V V(RWM), Bidirectional, 5 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC PACKAGE-6;
| 型号： | CP24C-T7-LF |
| 厂家： | 
PROTEK DEVICES |
| 描述： | Trans Voltage Suppressor Diode, 200W, 24V V(RWM), Bidirectional, 5 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC PACKAGE-6 局域网 光电二极管 |
| 文件： | 总8页 (文件大小：708K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CP05 - CP24C
Only One Name Means ProTek’Tion™
MULTIꢀLINE TVS ARRAY
DESCRIPTIꢁN
The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protecꢀon of sensi-
ꢀve IC components from the damaging effects of Electrostaꢀc Discharge (ESD). This series is ideally suited for use in
portable electronics such as SMART phones, laptops, and other wireless devices.
The CPxx and CPxxC series is usable on I/O ports where the signal voltage is posiꢀve. These devices will also provide
protecꢀon in accordance with IEC 61000-4-2 and IEC 61000-4-4 requirements. This series is available in a SOT-23-6
package configuraꢀon and is rated at 200 Waꢁs peak pulse power (8/20µs) per line.
SꢁTꢀ23ꢀ6 PACꢂAGE
FEATURES
APPLICATIꢁNS
• SMART Phones
• Portable Electronics
• Mulꢀple I/O Ports and Power Supplies
• FireWire, Ethernet and USB Interfaces
• Compaꢀble with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV
• Compaꢀble with IEC 61000-4-4 (EFT): 40A, 5/50ns
• Compaꢀble with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-
Gnd) & Level 2(Line-Line)
• 200 Waꢁs Peak Pulse Power per Line(tp = 8/20µs)
• Monolithic Design
• Protects 4 Bidirecꢀonal Lines & 5 Unidirecꢀonal Lines
• Unidirecꢀonal & Bidirecꢀonal Configuraꢀons
• ESD Protecꢀon > 25 kilovolts
• Available in Mulꢀple Voltages
• Low Clamping Voltage
• Low Leakage Current
• RoHS Compliant
• REACH Compliant
MEChANICAL ChARACTERISTICS
• Molded JEDEC SOT-23-6 Package
• Approximate Weight: 16 milligrams
• Lead-Free Pure-Tin Plaꢀng (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• Flammability Raꢀng UL 94V-0
• 8mm Tape and Reel per EIA Standard 481
PIN CꢁNFIGURATIꢁNS
6
5
4
6
5
4
1
2
3
1
2
3
UNIDIRECTIONAL
BIDIRECTIONAL
www.protekdevices.com
05133.R10 2/11
Page 1
CP05 - CP24C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE ChARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless ꢁtꢃerwise Specified
PARAMETER
SYMBꢁL
VALUE
200
UNITS
Waꢁs
°C
Peak Pulse Power (tp = 8/20µs) - See Figure 1
PPP
TL
Operaꢀng Temperature
Storage Temperature
-55 to 150
-55 to 150
TSTG
°C
ELECTRICAL ChARACTERISTICS PER LINE @ 25°C Unless ꢁtꢃerwise Specified
PART
NUMBER
(Notes 1ꢀ3)
DEVICE
MARꢂING
RATED
STANDꢀꢁFF
VꢁLTAGE
MINIMUM
BREAꢂDꢁWN
VꢁLTAGE
MAXIMUM
CLAMPING
VꢁLTAGE
ꢅFig. 2ꢆ
MAXIMUM
LEAꢂAGE
CURRENT
TYPICAL
CAPACITANCE
ꢄ 1mA
V(BR)
VꢁLTS
ꢄ IP = 1A
VC
VꢁLTS
ꢄVWM
ID
µA
ꢄ0V, 1Mhz
VWM
VꢁLTS
Cj
pF
CP05
CP05C
CP12
QRH
QRL
QRI
5.0
6.0
9.8
20
20
1
70
70
50
50
30
30
25
25
5.0
6.0
9.8
12.0
12.0
15.0
15.0
24.0
24.0
13.3
13.3
16.7
16.7
26.7
26.7
19.0
19.0
24.0
24.0
43.0
43.0
CP12C
CP15
QRM
QRJ
1
1
CP15C
CP24
QRN
QRK
QRO
1
1
CP24C
NꢁTES
1
1. Part numbers with an addiꢀonal “C” suffix are bidirecꢀonal, i.e., CP05C.
2. Unidirecꢀonal Only: For CPxx, test between pin 1 to 2 or 5, 4 to 2 or 5, 6 to 2 or 5, 3 to 2 or 5. For CPxxC, test between 2 to 1, 3, 4, 5, or 6.
3. Bidirecꢀonal Only: For CPxxC, test between pin 5 to 1 or 3 or 4 or 6. Electrical characterisꢀcs apply in both direcꢀons.
4. Unidirecꢀonal Only: For CPxx, capacitance measured between pins 1, 3, 4, 6 to 2. For CPxxC, capacꢀance measured between pins 2 to 1, 3, 4, 5, or 6.
www.protekdevices.com
05133.R10 2/11
Page 2
CP05 - CP24C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE ChARACTERISTICS
FIGURE 1
PEAꢂ PULSE PꢁWER VS PULSE TIME
10,000
1,000
200W, 8/20µs Waveform
100
10
0.1
1
10
100
1,000
10,000
td - Pulse Duraꢇon - µs
FIGURE 2
PULSE WAVE FꢁRM
FIGURE 3
PꢁWER DERATING CURVE
120
100
TEST
Peak Pulse Power
8/20µs
tf
Peak Value IPP
WAVEFORM
PARAMETERS
tf = 8µs
100
80
80
60
td = 20µs
e-t
60
40
20
0
40
td = t/(IPP/2)
20
0
Average Power
0
5
10
15
20
25
30
0
25
50
75 100 125
150
t - Time - µs
TA - Ambient Temperature - °C
www.protekdevices.com
05133.R10 2/11
Page 3
CP05 - CP24C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE ChARACTERISTICS
FIGURE 4
ꢁVERShꢁꢁT & CLAMPING VꢁLTAGE FꢁR CP05C
40
30
20
10
0
ESD Test Pulse - 25 kilovolt, 1/30ns ꢅWavesꢃapeꢆ
FIGURE 5
TYPICAL REVERSE VꢁLTAGE VS CAPACITANCE FꢁR CP05C
80
60
40
20
0
0
1
2
3
4
5
6
VR - Reverse Voltage - Volts
www.protekdevices.com
05133.R10 2/11
Page 4
CP05 - CP24C
Only One Name Means ProTek’Tion™
APPLICATIꢁN INFꢁRMATIꢁN
Line 1
Line 2
3
4
2
5
1
6
Line 3
Line 4
FIGURE 1 ꢀ CꢁMMꢁNꢀMꢁDE I/ꢁ PꢁRT PRꢁTECTIꢁN (UNIDIRECTIꢁNAL)
Circuit connecꢀvity is as follows:
• Line 1 connected to pin 1.
• Line 2 connected to pin 3.
• Line 3 connected to pin 4.
• Line 4 connected to pin 6.
• Pin 5 connected to ground.
• Pin 6 not connected.
Line 1
Line 2
3
4
2
5
1
6
Line 3
Line 4
FIGURE 1 ꢀ CꢁMMꢁNꢀMꢁDE I/ꢁ PꢁRT PRꢁTECTIꢁN (BIDIRECTIꢁNAL)
Circuit connecꢀvity is as follows:
• Line 1 connected to pin 1.
• Line 2 connected to pin 3.
• Line 3 connected to pin 4.
• Line 4 connected to pin 5.
• Pin 6 connected to ground.
• Pin 2 not connected.
CIRCUIT BꢁARD RECꢁMMENDATIꢁNS
Circuit board layout is criꢀcal for electromagneꢀc compaꢀbility protecꢀon. The following guidelines are recommended:
• The protecꢀon device should be placed near the input terminals or connectors, the device will divert the transient current
immediately before it can be coupled into the nearby traces.
• The path length between the TVS device and the protected line should be minimized.
• All conducꢀve loops including power and ground loops should be minimized.
• The transient current return path to ground should be kept as short as possible to reduce parasiꢀc inductance.
• Ground planes should be used whenever possible. For mulꢀlayer PCBs, use ground vias.
www.protekdevices.com
05133.R10 2/11
Page 5
CP05 - CP24C
Only One Name Means ProTek’Tion™
SꢁTꢀ23ꢀ6 PACꢂAGE INFꢁRMATIꢁN
D
ꢁUTLINE DIMENSIꢁNS
E
MILLIMETERS
MIN
INChES
DIM
MAX
3.05
1.75
1.30
0.40
1.05
1.45
0.20
3.00
0.15
0.60
MIN
0.110
0.059
0.036
0.012
0.033
0.036
0.003
0.102
0.0
MAX
0.120
0.070
0.051
0.016
0.040
0.057
0.008
0.118
0.006
0.024
A
2.80
1.50
0.90
0.30
0.85
0.90
0.09
2.60
0.0
4
6
1
5
2
B
0° - 8°
K
C
D
3
E
L
J
G
M
B
J
K
A
L
M
0.30
0.012
G
NꢁTES
1. Controlling dimension: inches.
2. Dimensioning and tolerances per ANSI Y14.5M, 1985.
3. Dimensions are exclusive of mold flash and metal burrs.
C
B
PAD LAYꢁUT DIMENSIꢁNS
C
MILLIMETERS
NꢁMINAL
0.70
INChES
NꢁMINAL
DIM
E
A
0.028
0.074
0.037
0.094
0.039
B
1.90
0.95
2.40
1.00
D
C
D
E
A
NꢁTES
1. Controlling dimension: inches.
www.protekdevices.com
05133.R10 2/11
Page 6
CP05 - CP24C
Only One Name Means ProTek’Tion™
TAPE AND REEL
P0
10 Pitches Cumulaꢀve
Tolerance on Tape. ± 0.2
P2
D
t
E
F
Top Cover Tape
K0
Pin 1
A0
W
B0
P
User Direcꢀon of Feed
SPECIFICATIꢁNS
TAPE
WIDTh
REEL DIA.
A0
B0
ꢂ0
D
E
F
W
P0
P2
P
tmax
178mm (7”)
8mm
3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10
0.25
NꢁTES
1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape.
4. Marking on Part - marking code (see page 2) and pin one defined by dot on package.
Package outline, pad layout and tape specificaꢀons per document number 06013.R5 2/11
ꢁRDERING INFꢁRMATIꢁN
BASE PART NUMBER
ꢅxx = Voltageꢆ
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE QTY
CPxx/CPxxC
-LF
-T7
3,000
7”
n/a
www.protekdevices.com
05133.R10 2/11
Page 7
CP05 - CP24C
Only One Name Means ProTek’Tion™
CꢁMPANY INFꢁRMATIꢁN
CꢁMPANY PRꢁFILE
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for
the protecꢀon of electronic systems from the effects of lightning, Electrostaꢀc Discharge (ESD), Nuclear Electromagneꢀc Pulse (NEMP), in-
ducꢀve switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
applicaꢀon specific protecꢀon soluꢀons for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
CꢁNTACT US
Corporate headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telepꢃone
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
By Fax
General: 602-431-2288
By E-mail:
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
Web
www.protekdevices.com
www.protekanalog.com
COPYRIGHT © ProTek Devices 2001 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characterisꢀcs described herein without noꢀce.
DESIGN CHANGES: ProTek reserves the right to disconꢀnue product lines without noꢀce and that the final judgement concerning selecꢀon and specificaꢀons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecꢀon or specificaꢀons of such products. ProTek makes no warranty, representaꢀon or guarantee regarding the suitability of
its products for any parꢀcular purpose, nor does ProTek assume any liability arising out of the applicaꢀon or use of any product or circuit and specifically disclaims any and all liability without limitaꢀon special,
consequenꢀal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wriꢁen consent from the factory.
www.protekdevices.com
05133.R10 2/11
Page 8
相关型号：
CP2500
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2501
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2502
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2504
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2506
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2508
HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes)
PANJIT
CP2540-7RB1
DC-DC Regulated Power Supply Module, 2 Output, 195W, Hybrid, METAL, CASE P01, MODULE
BEL
©2020 ICPDF网 联系我们和版权申明