PI3DBS3224 [PERICOM]
3.3V High Speed 2 : 4 Differential Mux/Demux;![PI3DBS3224](http://pdffile.icpdf.com/pdf2/p00338/img/icpdf/PI3DBS3224_2081769_icpdf.jpg)
型号: | PI3DBS3224 |
厂家: | ![]() |
描述: | 3.3V High Speed 2 : 4 Differential Mux/Demux |
文件: | 总10页 (文件大小:1055K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
PI3DBS3224
3.3V High Speed 2 : 4 Differential Mux/Demux
Features
Description
ꢀÎ2:4 Differential Multiplexer/Demultiplexer
ꢀÎBidirectional Operation
ꢀÎCan be used in
e PI3DBS3224 is a 2:4 bidirectional multiplexer for high-
speed differential and single ended signal applications (up to
720 Mbps). e PI3DBS3224 can be used in a 1:4 or dual 1:2
multiplexer/demultiplexer configuration. e PI3DBS3224 of-
fers a high BW of 1.2 GHz with channel RON of 13 Ω (Typ).
à
à
à
Single 1:4 Configuration
Dual 1:2 Configuration
Fan out 1:2 Configuration
e PI3DBS3224 can also be used to fan out a differential or
single ended signal pair to two ports simultaneously (fan-out
configuration). e BW performance is lower in this configura-
tion.
ꢀÎHigh BW (1.2 GHz Typ)
ꢀÎLow RON and CON:
à
à
13 Ω RON Typ
9 pF CON Typ
ꢀÎESD Performance (I/O Pins)
e PI3DBS3224 operates with a 3 to 3.6V power supply. It
features ESD protection of up to 8-kV contact discharge and
2-kV Human Body Model on its I/O pins.
à
à
8-kV Contact Discharge (IEC61000-4-2)
2-kV Human Body Model per JESD22-A114E (to
GND)
ꢀÎESD Performance (All Pins)
e PI3DBS3224 provides fail-safe protection by isolating the
I/O pins with high impedance when the power supply (VCC) is
not present.
à
2-kV Human Body Model per JESD22-A114E
ꢀÎSmall QFN package (3 x 3 mm, 0.4 mm pitch)
Applications
ꢀÎDesktop/Notebooks Computers
ꢀÎDisplayPort Auxiliary Channel Multiplexing
ꢀÎUSB 2.0 Multiplexing
ꢀÎNetbooks/eBooks/Tablets
Block Diagram
Pin Configuration
ENA
INA
OUTA1
OUTA0
1
0
1
0
1
15
11
INA+
INA-
INB+
INB-
SAO
SAI
SAO
SAI
VCC
SBI
SBI
SBO
OUTB1
OUTB0
0
1
0
GND
5
SBO
1
INB
ENB
www.pericom.com
04/28/14
14-0061
1
PI3DBS3224
3.3V High Speed 2:4 Differential Mux/Demux
Pin Description
Pin #
PIN Name
I/O Type
Description
14
15
12
11
16
1
SAI
SAO
Input
Input
Input
Input
Input
I/O
Control Input
Control Input
Control Input
Control Input
Enable
SBI
SBO
ENA
INA+
Input A
2
INA-
I/O
Input A
10
3
ENB
Input
I/O
Enable
INB+
Input B
4
INB-
I/O
Input B
9
OUTB0-
OUTB0+
OUTB1-
OUTB1+
GND
I/O
Output B0
Output B0
Output B1
Output B1
Ground
8
I/O
7
I/O
6
I/O
5
Ground
Power
I/O
13
17
18
19
20
VCC
Power Supply
Output A0
Output A0
Output A1
Output A1
OUTA0-
OUTA0+
OUTA1-
OUTA1+
I/O
I/O
I/O
www.pericom.com
04/28/14
14-0061
2
PI3DBS3224
3.3V High Speed 2:4 Differential Mux/Demux
Function Table
ENA, ENB
00
OUTA0
OUTA1
OUTB0
OUTB1
Hi-Z
Hi-Z
Hi-Z
Hi-Z
01
10
11
Hi-Z
Hi-Z
-
Hi-Z
-
-
Hi-Z
-
-
-
-
-
SAI, SAO, SBI, SBO
OUTA0
OUTA1
OUTB0
OUTB1
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
INB
-
-
INA
-
INA
-
INB
-
INB
-
INB
INB
-
-
INB
-
-
INB
INB
INB
INB
-
INA
-
-
INA
-
-
INB
-
INA
INA
INA
INA
-
-
INA
-
INB
-
-
INA
-
-
INB
-
-
INB
-
INA
INA
INA
INA
INA
-
-
INA
-
-
INB
-
-
INB
www.pericom.com
04/28/14
14-0061
3
PI3DBS3224
3.3V High Speed 2:4 Differential Mux/Demux
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Note:
Storage Temperature.............................................. -65ºC to+155ºC
Stresses greater than those listed under MAXIMUM RATINGS may
cause permanent damage to the device. is is a stress rating only and
functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for
Supply Voltage to Ground Potential.......................-0.3V to+4.0V
DC Input Voltage ......................................................-0.3V to+4.3V
DC Output Current ..............................................................120mA
Power Dissipation .................................................................... 0.5W
extended periods may affect reliability.
DC Electrical Characteristics over Operating Range
For Single 1:4 or Dual 1:2 configurations. TA = -40 OC to 85 OC, Typical values are at Vcc = 3.3V, TA= 25 OC (unless otherwise
noted)
Symbol
Parameter
Test Condition
Min Typ Max Unit
VIK
Digital input clamp voltage
Digital input leakage current
VCC = 3.6 V, II = -18 mA
-1.2
-0.9
V
IIN
VCC = 3.6 V, VIN =0 to 3.6 V
±2
±2
μA
VCC = 3.6 V, VO = 0 V to 3.6 V, VI = 0 V, Switch
OFF
(3)
IOZ
μA
IOFF
ICC
Power off leakage current
Supply current
VCC = 0 V, VIN = VCC or GND, VI/O = 0 V to 3.6 V
VCC = 3.6 V, II/O = 0, Switch ON or OFF
VCC = 3.3 V, VIN = VCC or GND
±8
130
5
μA
μA
pF
70
3
CIN
Digital input capacitance
VCC = 3.3 V, VI/O = 3.3V or 0, f = 10MHZ, Switch
OFF
CI/O(OFF)
CI/O(ON)
OFF capacitance
ON capacitance
6
9
7
pF
pF
VCC = 3.3 V, VI/O = 3.3V or 0, f = 10MHZ, Switch
ON
10
19
VCC = 3.6 V, VI = VCC, IO = -30 mA
VCC = 3.3 V, VI = 0.5 V, IO = -30 mA
13
10
Ω
Ω
ron
ON state resistance
ON state resistance match be-
tween channel
∆ron
VCC = 3 V, VI = 0 to VCC, IO = -30 mA
2
4
2.5
Ω
Ω
ron(flat)
ON state resistance flatness
VCC = 3 V, VI = 1.5 V and VCC, IO = -30 mA
6
Notes:
1.
2.
VIN and IIN refer to control inputs. VI, VO, II and IO refer to data pins.
All typical values are at VCC = 3.3V (unless otherwise noted), TA = 25 OC.
3.
For I/O ports, the parameter IOZ includes the input leakage current.
www.pericom.com
04/28/14
14-0061
4
PI3DBS3224
3.3V High Speed 2:4 Differential Mux/Demux
Dynamic Characteristics
For Single 1:4 or Dual 1:2 configurations. TA = -40 OC to 85 OC, Typical values are at Vcc = 3.3V ± 10% and TA= 25 OC (unless
otherwise noted)
Symbol
Parameter
Test Condition
Typ
Unit
BW
Bandwidth
RL = 50 Ω, Switch ON
1.2
-30
-35
GHZ
dB
OISO
OFF Isolation
Crosstalk
RL = 50 Ω, f = 250 MHZ
RL = 50 Ω, f = 250 MHZ
XTALK
dB
Switching Characteristics
For Single 1:4 or Dual 1:2 configurations. Over operating range, TA = -40 OC to 85 OC, Vcc = 3.3V ± 10%, GND = 0 V (unless oth-
erwise noted)
Symbol
Parameter
Test Condition
Min Typ Max Unit
(1)
RL = 50 Ω, CL = 2 pF
50
40
20
40
40
ps
ns
ns
ps
ps
tpd
SAI/SAO/SBI/SBO to OUTAx/OUTBx
SAI/SAO/SBI/SBO to OUTAx/OUTBx
RL = 50 Ω, CL = 2 pF
RL = 50 Ω, CL = 2 pF
RL = 50 Ω, CL = 2 pF
RL = 50 Ω, CL = 2 pF
100
30
tON
tOFF
(2)
(3)
tsk(o)
tsk(p)
Notes:
1.
The propagation delay is the calculated RC time constant of the typical ON-State resistance of the switch and the specified load capacitance when driven by an
ideal voltage source (zero output impedance).
2.
3.
Output skew between center channel and any other channel.
Skew between opposite transitions of the same output ( |tPHL - tPLH | ).
www.pericom.com
04/28/14
14-0061
5
PI3DBS3224
3.3V High Speed 2:4 Differential Mux/Demux
DC Electrical Characteristics over Operating Range
For fan-out 1:2 configurations. TA = -40 OC to 85 OC, Typical values are at Vcc = 3.3V, TA= 25 OC (unless otherwise noted)
Symbol
Parameter
Test Condition
Min Typ Max Unit
VIK
Digital input clamp voltage
Digital input leakage current
VCC = 3.6 V, II = -18 mA
-1.2
-0.9
V
IIN
VCC = 3.6 V, VIN =0 to 3.6 V
±2
±2
μA
VCC = 3.6 V, VO = 0 V to 3.6 V, VI = 0 V, Switch
OFF
(3)
IOZ
μA
μA
VCC = 0 V, VIN = VCC or GND, VI/O = 0 V to 3.6
V
IOFF
Power off leakage current
±8
ICC
Supply current
VCC = 3.6 V, II/O = 0, Switch ON or OFF
VCC = 3.3 V, VIN = VCC or GND
70
3
130
5
μA
CIN
Digital input capacitance
pF
VCC = 3.3 V, VI/O = 3.3V or 0, f = 10MHZ, Switch
OFF
CI/O(OFF)
OFF capacitance
6
7
pF
VCC = 3.3 V, VI/O = 3.3V or 0, f = 10MHZ,
Switch ON
CI/O(ON)
ron
ON capacitance
12
13
2
13
19
2.5
6
pF
Ω
ON state resistance
VCC = 3.6 V, VI = VCC, IO = -30 mA
ON state resistance match between
channel
∆ron
VCC = 3 V, VI = 0 to VCC, IO = -30 mA
VCC = 3 V, VI = 1.5 V and VCC, IO = -30 mA
Ω
ron(flat)
ON state resistance flatness
4
Ω
Notes:
1.
2.
3.
VIN and IIN refer to control inputs. VI, VO, II and IO refer to data pins.
All typical values are at VCC = 3.3V (unless otherwise noted), TA = 25 OC.
For I/O ports, the parameter IOZ includes the input leakage current.
Dynamic Characteristics
For fan-out 1:2 configurations. TA = -40 OC to 85 OC, Typical values are at Vcc = 3.3V ± 10% and TA= 25 OC (unless otherwise
noted)
Symbol
Parameter
Test Condition
Typ
Unit
BW
Bandwidth
RL = 50 Ω, Switch ON
500
-30
-35
MHZ
dB
OISO
OFF Isolation
Crosstalk
RL = 50 Ω, f = 250 MHZ
RL = 50 Ω, f = 250 MHZ
XTALK
dB
www.pericom.com
04/28/14
14-0061
6
PI3DBS3224
3.3V High Speed 2:4 Differential Mux/Demux
Switching Characteristics
For fan-out 1:2 configuration. Over operating range, TA = -40 OC to 85 OC, Vcc = 3.3V ± 10%, GND = 0 V (unless otherwise noted)
Symbol
Parameter
Test Condition
Min Typ Max Unit
(1)
RL = 50 Ω, CL = 2 pF
140
40
20
60
60
ps
ns
ns
ps
ps
tpd
tON
tOFF
SAI/SAO/SBI/SBO to OUTAx/OUTBx R = 50 Ω, CL = 2 pF
SAI/SAO/SBI/SBO to OUTAx/OUTBx RLL = 50 Ω, CL = 2 pF
RL = 50 Ω, CL = 2 pF
100
30
(2)
(3)
tsk(o)
RL = 50 Ω, CL = 2 pF
tsk(p)
Notes:
1.
The propagation delay is the calculated RC time constant of the typical ON-State resistance of the switch and the specified load capacitance when driven by an
ideal voltage source (zero output impedance).
2.
3.
Output skew between center channel and any other channel.
Skew between opposite transitions of the same output ( |tPHL - tPLH | ).
DC Electrical Characteristics over Operating Range
TA = -40 OC to 85 OC, Typical values are at Vcc = 3.3V, TA= 25 OC
Symbol
Parameter
Test Condition
Min Typ Max Unit
VIO
Analog I/O voltage
0
0.75VCC
0
VCC
VCC
0.6
3.6
V
V
V
V
ENx, SAx, SBx Pins
ENx, SAx, SBx Pins
VIH
VIL
VCC
High level input control voltage
Low level input control voltage
Supply voltage
3.0
www.pericom.com
04/28/14
14-0061
7
PI3DBS3224
3.3V High Speed 2:4 Differential Mux/Demux
Test Circuit For Electrical Characteristics
V
CC
Input Generator
V
IN
50Ω
50Ω
VG1
DUT
Input Generator
2 x VCC
S1
Open
RL
V
I
VO
GND
50Ω
C
L
RL
VG2
(see note 1)
TEST
tPLZ/tPZL
tPHZ/tPZH
VCC
S1
RL
50Ω
50Ω
Vin
GND
VCC
CL
V∆
2 x VCC
GND
2 pF
0.3 V
3.3 V ± 0.3 V
3.3 V ± 0.3 V
2pF
0.3 V
V
CC
Output Control
(VIN
VCC/2
VSEL
)
VCC/2
0 V
t
PZL
t
PZL
Output
Waveform 1
S1 at 2 x VCC
(See Note 2)
V
OH
V
O
O
V
CC/2
V
OL + 0.3 V
VOL
tPZH
t
PZH
Output
Waveform 2
S1 at GND
VOH
V
OH - 0.3 V
VCC/2
V
(See Note 2)
VOL
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIME
Notes:
1.
2.
CL includes probe and jig capacitance.
Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
is for an output with internal conditions such that the output is high, except when disabled by the output control.
Waveform 2
3.
4.
5.
6.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHZ, ZO = 50 Ω, tr ≤ 2.5 ns. tf ≤ 2.5 ns.
The outputs are measured one at a time, with one transition per measurement.
tPLZ and tPHZ are the same as tOFF
.
tPZL and tPZH are the same as tON
.
www.pericom.com
04/28/14
14-0061
8
PI3DBS3224
3.3V High Speed 2:4 Differential Mux/Demux
Test Circuit For Electrical Characteristics
V
CC
Input Generator
V
IN
50Ω
50Ω
VG1
DUT
Input Generator
2 x VCC
S1
Open
RL
V
I
VO
GND
50Ω
C
L
RL
VG2
(see note 1)
TEST
tsk(o)
VCC
S1
RL
50Ω
50Ω
Vin
CL
Open
Open
VCC or GND
VCC or GND
2 pF
3.3 V ± 0.3 V
3.3 V ± 0.3 V
2pF
tsk(p)
3.0 V
1.5 V
Dara In at
Ax or Ay
VI
0 V
tPLHx
tPLHx
VOH
(VOH + VOL)/2
Data Out at
3.0 V
1.5 V
0 V
Vo
XB
1
or XB
2
V
OL
Input
tsk(o)
t
sk(o)
tPLH
tPHL
VOH
(VOH + VOL)/2
V
OH
Data Out at
YB or YB
Vo
1
2
V
OL
(VOH + VOL)/2
Output
V
OL
tPLHy
t
PLHy
tsk(p) = tPHL - tPLH
tsk(o) = tPLHy - tPLHx or tPHLy -tPHLx
VOLTAGE WAVEFORMS
PULSE SKEW [tSK(p)
VOLTAGE WAVEFORMS
]
OUTPUT SKEW (
t
SK(O))
Notes:
1.
2.
CL includes probe and jig capacitance.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHZ, ZO = 50 Ω, tr ≤ 2.5 ns. tf ≤ 2.5 ns.
3.
The outputs are measured one at a time, with one transition per measurement.
www.pericom.com
04/28/14
14-0061
9
PI3DBS3224
3.3V High Speed 2:4 Differential Mux/Demux
Packaging Mechanical: 20-pin TQFN (ZNA)
DATE: 09/19/13
Notes:
DESCRIPTION: 20-contact, Thin Fine Pitch Quad Flat No lead Package (TQFN)
PACKAGE CODE: ZNA
1. All dimensions are in mm. Angles in degrees.
2. Refer JEDEC MO-220.
3. Recommended land pattern is for reference only.
DOCUMENT CONTROL #: PD-2169
REVISION: --
13-0240
Ordering Information
Ordering Code
Packaging Code
Package Description
PI3DBS3224ZNAE
ZNA
20-contact, in Fine Pitch Quad Flat No Lead Package (TQFN)
Notes:
•ꢀ ermal characteristics can be found on the company web site at www.pericom.com/packaging/
•ꢀ "E" denotes Pb-free and Green
•ꢀ Adding an "X" at the end of the ordering code denotes tape and reel packaging
Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com
www.pericom.com
04/28/14
14-0061
10
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00283/img/page/PI3DBV14QE_1685754_files/PI3DBV14QE_1685754_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00283/img/page/PI3DBV14QE_1685754_files/PI3DBV14QE_1685754_2.jpg)
PI3DBV14QE
Multiplexer And Demux/Decoder, 3DBV Series, 2-Func, 1 Line Input, 4 Line Output, True Output, CMOS, PDSO16, 0.150 INCH, GREEN, PLASTIC, QSOP-16
PERICOM
©2020 ICPDF网 联系我们和版权申明