PI3DBV14QE [PERICOM]
Multiplexer And Demux/Decoder, 3DBV Series, 2-Func, 1 Line Input, 4 Line Output, True Output, CMOS, PDSO16, 0.150 INCH, GREEN, PLASTIC, QSOP-16;
| 型号： | PI3DBV14QE |
| 厂家： | 
PERICOM SEMICONDUCTOR CORPORATION |
| 描述： | Multiplexer And Demux/Decoder, 3DBV Series, 2-Func, 1 Line Input, 4 Line Output, True Output, CMOS, PDSO16, 0.150 INCH, GREEN, PLASTIC, QSOP-16 光电二极管 逻辑集成电路 |
| 文件： | 总9页 (文件大小：339K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ADVANCE INFORMATION
PI3DBV14
Low Voltage, High Bandwidth, Video, 4:1
Mux/DeMux, NanoSwitch™ with Single Enable
Features
Description
• Near-Zero propagation delay
Pericom Semiconductor’s PI3DBV series of switch circuits are
produced using the Company’s advanced sub-micron CMOS
technology, achieving industry leading performance.
• 5Ω switches connect inputs to outputs
•
•
•
•
•
•
•
•
High signal passing bandwidth (300MHz)
Beyond Rail-to-Rail switching
ThePI3DBV14isa2-channel,4:1Multiplexer/Demultiplexerwith
3-state outputs.The switch introduces no additional ground bounce
noise or propagation delay.
5V I/O tolerant with 3.3V supply
2.5V and 3.3V supply voltage operation
Hot insertion capable
The PI3DBV1device is very useful in switching differential video
signals and others that have high bandwidth (300MHz).
Industrial operating temperature: -40ºC to +85ºC
2KV ESD Protection (human body model)
Latch-up performance >250mA per JESD17
• Packaging (Pb-free & Green available):
– 16-pin 150 mil wide plastic QSOP (Q)
– 16-pin 173 mil wide plastic TSSOP (L)
– 20-contact TQFN (ZH)
Pin Configuration
Block Diagram
IA1 IA2 IA3 IB0 IB1 IB2 IB3
IA0
1
20
N.C.
N.C.
19�
18
EN
S1
2
3
4
5
6
7
8
9
VCC
N.C.
S0
EN
S1
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
EN
IA3
17 S0
16 IB3
IA3
IA2
IA1
IA0
YA
IB3
IB2
IB1
IB0
YB
IA2
IA1
15
IB2
IA0
S0
S1
14
IB1
YA
13
IB0
GND
12
YB
N.C.
10
11
Notes:
1. N.C. = No internal connection
YA
YB
(1)
Truth Table
Pin Description
Enable
Select
Pin Name
Description
EN
H
L
S
S
Y
Function
Disable
1
0
A , B
N I N
Data Inputs
Select Inputs
Enable
I
X
L
X
L
Hi-Z
I0
S
0-1
S1-0 = 0
S1-0 = 1
S1-0 = 2
S1-0 = 3
EN
L
L
H
L
I1
Y to Y
Data Outputs
Ground
A
B
L
H
H
I2
GND
L
H
I3
V
Power
CC
Notes:
1. H=High Voltage Level; L=Low Voltage Level
P-0.4
07/13/04
1
ADVANCE INFORMATION
PI3DBV14
Low Voltage, High Bandwidth, Video, 4:1
Mux/DeMux, NanoSwitch™ with Single Enable
Maximum Ratings
(Above which the useful life may be impaired. For user guidelines, not tested.)
Storage Temperature ................................................ –65°C to +150°C
Ambient Temperature with Power Applied ............... –40°C to +85°C
Supply Voltage to Ground Potential ........................... –0.5V to +4.6V
DC Input Voltage ........................................................ –0.5V to +6.0V
DC Output Current................................................................... 120mA
Power Dissipation....................................................................... 0.5W
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these
or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect re-
liability.
DC Electrical Characteristics, 3.3V Supply (Over the Operating Range, TA = –40°C to +85°C, VCC = 3.3V ±10%)
(1)
(2)
Parameters
Description
Input HIGH Voltage
Input LOW Voltage
Clamp Diode Voltage
Input HIGH Current
Input LOW Current
Test Conditions
Min.
Typ
Max. Units
V
Guaranteed Logic HIGH Level
Guaranteed Logic LOW Level
2.0
IH
IL
IK
V
V
–0.5
0.8
–1.8
±1
V
V
V
V
= Min., I = –18 mA
-1.3
CC
CC
CC
IN
I
I
I
= Max., V = V
IN CC
IH
= Max., V = GND
±1
µA
IL
IN
CC
High Impedance Output Current 0 ≤ Y, In ≤ V
±1
OZH
V
I
= Min., V = 0.0V,
CC
IN
4
5
6
Ω
(4)
= 48 mA or -64mA
R
Switch On Resistance
ON
ON
V
= Min., V = 3.6V, I = -15 mA
8
CC
IN
ON
DC Electrical Characteristics, 2.5V Supply (Over Operating Range, T = –40°C to +85°C, V = 2.5V ± 10%)
A
CC
(5)
Parameters
Description
Input HIGH Voltage
Inout LOW Voltage
Clamp Diode Voltage
Input HIGH Current
Input LOW Current
High Impedance Current
Test Conditions
Min.
1.8
–0.3
–
Typ.
Max.
V + 0.3
CC
Units
V
Guaranteed Logic HIGH Level
Guaranteed Logic LOW Level
–
–
IH
IL
IK
V
V
0.8
V
V
V
V
= Max., I = –6mA
–0.7
–
–1.8
±1
CC
CC
CC
IN
I
= Max., V = V
CC
–
IH
IN
IIL
= Max., V = GND
–
–
±1
µA
Ω
IN
CC
(3)
I
0 ≤ Y, In ≤ V
–
–
±1
OZH
V
= Min., V =0.0V,
CC
IN
–
–
6
7
8
I
= –48mA
ON
(4)
R
Switch On Resistance
ON
V
= Min., V = 2.25V,
CC
IN
14
I
= -15mA
ON
P-0.4
07/13/04
2
ADVANCE INFORMATION
PI3DBV14
Low Voltage, High Bandwidth, Video, 4:1
Mux/DeMux, NanoSwitch™ with Single Enable
Capacitance (T = 25°C f = 1 MHz)
A
(5)
Parameters
Description
Test Conditions
Typ.
3.0
Units
C
Input Capacitance
IN
C
In Capacitance, Switch Off
Y Capacitance, Switch Off
Y/In Capacitance, Switch On
3.5
OFF(IN)
V
= 0V
pF
IN
C
12
OFF(Y)
C
ON
15.0
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3V, TA = 25°C ambient and maximum loading.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. Measured by the voltage drop between Y and In pin at indicated current through the switch. On-Resistance is determined
by the lower of the voltages on the two (Y, In) pins.
5. This parameter is determined by device characterization but is not production tested.
Power Supply Characteristics
(1)
(2)
Parameters
Description
Test Conditions
= 3.6V, V = GND or V
CC
Min. Typ.
Max.
Units
mA
I
Quiescent Power Supply Current
V
0.8
CC
CC
IN
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at VCC = 3.3V, +25°C ambient.
3. Per LVTTL driven input (control inputs only); Y and In pins do not contribute to ICC. This parameter is guaranteed, but not production tested.
P-0.4
07/13/04
3
ADVANCE INFORMATION
PI3DBV14
Low Voltage, High Bandwidth, Video, 4:1
Mux/DeMux, NanoSwitch™ with Single Enable
Dynamic Electrical Characteristics Over the Operating Range (T = -40º to +85º, V = 3.3V ± 10%)
A
CC
Parameter
Description
Test Condition
See Test Diagram
See Test Diagram
See Test Diagram
Min.
Typ.
Max.
Units
dB
X
Crosstalk
-60
-60
300
TALK
O
Off-Isolation
-3dB Bandwidth
IRR
BW
200
MHz
Switching Characteristics over 3.3V Operating Range
Com.
Typ.
(1)
Parameters
Description
Conditions
Units
Min.
Max.
t
t
PLH
(2,3)
Propogation Delay
Y to In, In to Y
See Test Diagram
0.3
PHL
t
t
PZH
Enable Time S or EN to Y or In
Disable Time S or EN to Y or In
1.5
1.5
9.0
9.0
ns
PZL
See Test Diagram
t
t
PHZ
PLZ
Switching Characteristics over 2.5V Operating Range
Com.
Min.
(1)
Parameters
Description
Conditions
Units
Max.
t
t
PLH
(2,3)
Propogation Delay
Y to In, In to Y
See Test Diagram
0.3
PHL
t
t
PZH
Enable Time S or EN to Y or In
Disable Time S or EN to Y or In
1.5
1.5
15.0
12.0
ns
PZL
See Test Diagram
t
t
PHZ
PLZ
Notes:
1. See test circuit and waveforms.
2. This parameter is guaranteed but not tested on Propagation Delays.
3. The switch contributes no propagational delay other than the RC delay of the On-Resistance of the switch and the load
capacitance. The time constant for the switch alone is of the order of 0.30ns for 10pF load. Since this time constant is much
smaller than the rise/fall times of typical driving signals, it adds very little propagational delay to the system. Propagational
delay of the switch when used in a system is determined by the driving circuit on the driving side of the switch and its
interaction with the load on the driven side.
P-0.4
07/13/04
4
ADVANCE INFORMATION
PI3DBV14
Low Voltage, High Bandwidth, Video, 4:1
Mux/DeMux, NanoSwitch™ with Single Enable
(1)
Test Circuit for Electrical Characteristics
6.0V
VCC
200Ω
VOUT
VIN
Pulse
Generator
D.U.T
10pF
CL
200Ω
RT
Notes:
1. CL = Load capacitance: includes jig and probe capacitance.
2. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator
3. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
4. All input impulses are supplied by generators having the following characteristics: PRR ≤ MHz, ZO = 50Ω, tR ≤ 2.5ns, tF ≤ 2.5ns.
5. The outputs are measured one at a time with one transition per measurement.
Switch Positions
Test
Switch
6.0V
t
, t
PLZ PZL
t
, t
GND
Open
PHZ PZH
Prop Delay
Test Circuit for Dynamic Electrical Characteristics
HP4195A
R1
T1
S1
V
CC
D.U.T
HP11667A
10pF
50Ω
P-0.4
07/13/04
5
ADVANCE INFORMATION
PI3DBV14
Low Voltage, High Bandwidth, Video, 4:1
Mux/DeMux, NanoSwitch™ with Single Enable
Switching Waveforms
2.5V
S or EN
Output
1.25V
1.25V
3.5V
1.5V
0V
2.5V
2.5V
Input
tPZL
tPLZ
VOH
tPLH
tPHL
VDD/2
VOL +0.3V
VOL
VOH
VOL
Output
2.5V
2.5V
tPHZ
tPZH
VOH
VOL
VDD/2
VOH -0.3V
Output
Voltage Waveforms Enable and Disable Times
3.5V
2.5V
1.5V
Input
tPLH
tPHL
VOH
2.5V
Output
VOL
tSK(p) = I tPHL
tPLH I
–
Pulse Skew - t
SK(p)
P-0.4
07/13/04
6
ADVANCE INFORMATION
PI3DBV14
Low Voltage, High Bandwidth, Video, 4:1
Mux/DeMux, NanoSwitch™ with Single Enable
Applications Information
Logic Inputs
The logic control inputs can be driven upto 3.6Vregardless of the supply voltage. For example, given a +3.3V supply, EN maybe
®
driven LOW to 0V and HIGH to 3.6V. Driving EN Rail-to-Rail minimizes power consumption.
Power Supply-Sequencing
Proper power supply sequencing is recommended for all CMOS devices. Always apply V before applying signals to the input/
CC
output or control pins.
Hot Insertion
For Datacom and Telecom applications that have ten or more volts passing through the backplane, a high voltage from the power
supply may be seen at the device input pins during hot insertion. The PI3CHxx devices have maximum limits of 6V and 120mA for
20ns. If the power is higher or applied for a longer time or repeatedly reaches the maximum limits, the devices can be damaged.
Packaging Mechanical: 16-pin QSOP (Q)
16
.008
0.20
MIN.
.008
.013
0.20
0.33
.150
.157
3.81
3.99
Guage Plane
0˚-6˚
.010
.016
.035
0.41
0.89
0.254
Detail A
1
.189
.197
.041
1.04
REF
4.80
5.00
0.38
.015 x 45°
.008
0.203 REF
1.35
1.75
.053
.069
Detail A
0.178
0.254
.007
.010
0.41
1.27
.016
.050
SEATING
PLANE
.228
.244
.004
.010
0.101
0.254
.008
.012
.025
BSC
0.635
5.79
6.19
0.203
0.305
X.XX
X.XX
DENOTES DIMENSIONS IN MILLIMETERS
P-0.4
07/13/04
7
ADVANCE INFORMATION
PI3DBV14
Low Voltage, High Bandwidth, Video, 4:1
Mux/DeMux, NanoSwitch™ with Single Enable
Packaging Mechanical: 16-pin TSSOP (L)
16
.169
.177
4.3
4.5
1
.193
.201
.004 0.09
.008 0.20
4.9
5.1
.047
0.45 .018
0.75 .030
max.
1.20
SEATING
PLANE
.252
BSC
6.4
.002
.006
0.05
0.15
.0256
BSC
.007
.012
X.XX DENOTES CONTROLLING
X.XX DIMENSIONS IN MILLIMETERS
0.65
0.19
0.30
Packaging Mechanical: 20-Contact TQFN (ZH)
0.75±0.05
3.50 REF.
4.50±0.10 (S)
Pin 20
3.05±0.10
Pin 1
C 0.35
0.50 TYP. (14X)
0.25±0.05
0.40±0.10
0.0-0.05
0.20 REF.
P-0.4
07/13/04
8
ADVANCE INFORMATION
PI3DBV14
Low Voltage, High Bandwidth, Video, 4:1
Mux/DeMux, NanoSwitch™ with Single Enable
Ordering Information
Ordering Code
PI3DBV14Q
Package Code
Package Description
150-mil, 16-pin QSOP
Q
Q
L
L
E
PI3DBV14QE
Pb-free & Green, 150-mil, 16-pin QSOP
173-mil, 16-pin TSSOP
PI3DBV141L
PI3DBV14LE
Pb-free & Green, 173-mil, 16-pin TSSOP
Pb-free & Green, 20-Contact TQFN
PI3DBV14ZHE
Notes:
1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/
2. Number of Transistors = TBD
Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com
P-0.4
07/13/04
9
相关型号：
©2020 ICPDF网 联系我们和版权申明