L-T650WDT-CW3 [PARALIGHT]
SURFACE MOUNT DEVICE LED;
| 型号： | L-T650WDT-CW3 |
| 厂家： | 
PARA LIGHT ELECTRONICS CO., LTD. |
| 描述： | SURFACE MOUNT DEVICE LED |
| 文件： | 总16页 (文件大小：348K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Release by
PARALIGHT DCC
PARA LIGHT ELECTRONICS CO., LTD.
4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan
Tel: 886-2-2225-3733
E-mail: para@para.com.tw
Fax: 886-2-2225-4800
http://www.para.com.tw
DATA SHEET
PART NO.: LT650WDT-CW3
REV: A/1
CUSTOMER’S APPROVAL : _______________
DCC : ____________
PAGE 1 of 16
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PARA-FOR-065
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
l Features
Û
Û
Û
Û
Û
Û
Top view, Wide view angle, Cool White color PLCC 2 package SMD LED .
EIA STD package, packing in 8mm tape on 7" diameter reels (ANSI/EIA-481-B-2001).
Compatible with automatic Pick & Place equipment.
Compatible with IR Reflow soldering and TTW soldering.
Pb free product and acceptable lead-free process!
Meet RoHS Green Product.
l Application
＊General lighting
＊Decorative and Entertainment Lighting.
＊Indicators.
l Package Outline Dimensions
TOP VIEW
SIDE VIEW
3.00
0. 15±0. 03
C0.45
POLARITY
+
-
FRONT VIEW
BACK VIEW
2.70
1.90
50°
0. 75
Notes:
1. All dimensions are in millimeters.
±
2. Tolerance is
0.10mm (.004") unless otherwise noted.
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
2 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
l Chip Materials
Û
Û
Û
Dice Material : InGaN
Light Color : Cool White
Lens Color : Light Yellow Diffused.
l Absolute Maximum Ratings(Ta=25℃)
Symbol
PD
Parameter
Power Dissipation
Rating
110
Unit
mW
Peak Forward Current
IPF
100
mA
(1/10 Duty Cycle, 0.1ms Pulse Width)
Continuous Forward Current
Reverse Voltage
IF
20
5
mA
V
VR
ESD
Topr
Tstg
Note A :
Electrostatic Discharge Threshold (HBM)Note A
Operating Temperature Range
Storage Temperature Range
2000
V
℃
℃
-40 ~ + 85
-40 ~ +
100
HBM : Human Body Model. Seller gives no other assurances regarding the ability of to
withstand ESD.
l Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
Viewing Angle
Symbol
IV
Min.
2000
Typ.
2200
120
Max.
3.60
Unit
mcd
Deg
Test Condition
IF=20mA
Note 2
2 1/2
θ
CIE Chromaticity
CIE Chromaticity
Forward Voltage
x
y
0.33
0.34
3.20
IF=20mA
VF
V
IF = 20mA
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
3 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that
proximities the CIE eye-response curve.
2.
1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
θ
intensity.
3. Caution in ESD :
Static Electricity and surge damages the LED. It is recommended use a wrist band or
anti-electrostatic glove when handling the LED. All devices, equipment and machinery
must be properly grounded.
4. Major standard testing equipment by “Instrument System” Model : CAS140B Compact
Array Spectrometer and “KEITHLEY” Source Meter Model : 2400.
l Typical Electro-Optical Characteristics Curves
Fig.1 Relative Intensity vs. Wavelength
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
4 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
l Typical Electro-Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
50
40
30
20
Ta=25 C
Ta=25 C
10
0
0
20
40
60
80 100
Ambient Temperature Ta( C)
Fig.3 Relative Luminous Intensity vs.Forward Current
Fig.2 Forward Current Derating Curve
Fig.1 Forward Current vs.Forward Voltage
0
10
20
200
2
30
40
Ta=25 C
IFP=20mA
100
1
1.0
0.9
50
0.5
50
60
30
20
0.8
0.2
0.1
70
80
90
0.7
10
1
20
Ambient Temperature Ta(
5
10
50 100
0.5 0.3 0.1 0.2 0.4 0.6
Fig.5 Spatial Distribution
-40
-20
20 40 60 80 100
0
)
Ambient Temperature Ta(
)
Fig.4 Luminous Intensity vs.Ambient Temperature
Fig.6 Forward Current Derating Curve
Ta=25 C
IFP=60mA
IFP=20mA
IFP=5mA
IFP=20mA
1mA
5mA
-30
C
20mA
50mA
0
C
25
C 50 C
C
85
100mA
x
x
Ambient Temperature Ta( C)
Fig.8 Ambient Temperature vs.Chromaticity Coordinate
Fig.7 Ambient Temperature vs.Forward Voltage
Fig.9 Forward Current vs.Chromaticity Coordinate
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27 PAGE
5 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
l IV Bin Code List
Φ(lm)
Luminous Intensity(IV), Unit:mcd@20mA
Typ.
6.30
H152
H161
H162
H171
2000
2100
2200
2350
2100
2200
2350
2500
6.60
7.00
7.50
Tolerance of each bin are±10%
l VF Bin Code List
Forward Voltage(VF),, Unit:V@20mA
BINCODE
MIN
MAX
14
15
16
17
18
19
20
2.90
3.00
3.10
3.20
3.30
3.40
3.50
3.60
3.00
3.10
3.20
3.30
3.40
3.50
Tolerance of each bin are±0.1V.
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
6 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
●Bin Range of Chromaticity Coordinates @ 20mA
Rank WH51
Rank WH52
0.322 0.3325 0.3322
x
y
0.322
0.332
0.321
0.345
0.333
0.3565
0.3325
0.3410
x
y
0.323
0.319
0.332
0.341
0.3274
Rank WH61
Rank WH62
x
y
0.3325
0.341
0.333
0.3398
0.3623
0.3388
0.3465
x
y
0.3322 0.3325 0.3388
0.3274 0.341 0.3465
0.338
0.333
0.3565
＊ Measurement of Color coordinates : +/- 0.01
●C.I.E Chromaticity Diagram
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
7 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
l Label Explanation
CUS. PART NO: To be denominated.
CUSTOMER: To be denominated.
PART NO: Refer to P16
IV--- Luminous Intensity Code
VF--- Forward Voltage Code
CIE--- Color Rank Code
LOT NO:
E L P 7 8 0001
A
B
C
D
E
F
A---E: For series number
B---L: Local F: Foreign
C---P: PLCC SMD
D---Year
E---Month
F---SPEC.
PACKING QUANTITY OF BAG :
2000pcs max for T670 series
2000pcs max for T650 series
2000pcs max for S020 series
DATE CODE：2007 08 02
G
H
I
G--- Year
H--- Month
I --- Day
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
8 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
l Reel Dimensions
Notes:
1. Taping Quantity : 1000pcs/reel、1500 pcs/reel、2000 pcs/reel
2. The tolerances unless noted is±0.1mm, Angle±0.5°, Unit: mm.
l Suggest Soldering Pad Dimensions
1. 12
1. 34
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
9 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
l Package Dimensions Of Tape And Reel
User Feed Direction
4.00∮0.10
(.157∮.004)
2.00∮0.05
(.079∮.002)
4.00∮0.10
(.157∮.004)
*0.254∮0.020
(.0100∮.0008)
*1.73∮0.10
(.068∮.004)
Notes: All dimensions are in millimeters.
l Packaging Of Electronic Components On Continuous Tapes
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
10 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
l Moisture Resistant Packaging
Label
Reel
Label
Desiccant
Aluminum moistue-proof bag
Label
Box
435
Carton
Notes : One reel in a bag, one bag in a inner box, ten inner boxes in a carton. Unit : mm.
l Cleaning
If cleaning is required , use the following solutions for less than 1 minute and less than 40℃.
Û
Û
Appropriate chemicals: isopropyl alcohol. (When using other solvents, it should be confirmed
beforehand whether the solvents will dissolve the package and the resin or not.)
Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as
ultrasonic power and the assembled condition. Before cleaning, a pre-test should be
confirm whether any damage to the LEDS will occur.
Û
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
11of 16
PARA-FOR-068
Relea
s
e
e
by
P
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
● Suggest Sn/Pb IR Reflow Soldering Profile Condition:
● Suggest Pb-Free IR Reflow Soldering Profile Condition:
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27 PAGE
12 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
l CAUTIONS
1. Static Electricity:
* Static electricity or surge voltage damages the LEDs.
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
* All devices, equipment and machinery must be properly grounded.
It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs.
* When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not. It is easy to find static-damaged
LEDs by a light-on test or a VF test at a lower current (blew 1mA is recommended).
* Damaged LEDs will show some unusual characteristics such as the leak current remarkably increases,
the forward voltage becomes lower, or the LEDs do not light at the low current.
Criteria: (VF>2.0V,at IF=0.5m A )
2. Storage :
* Before opening the package :
The LEDs should be kept at 30°C or less and 85%RH or less. When storing the LEDs, moisture
proof packaging with absorbent material (silica gel) is recommended.
* After opening the package :
The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be soldered within
168 hours (7 days) after opening the package. If unused LEDs remain, they should be stored in
moisture proof packages, such as sealed containers with packages of moisture absorbent material
(silica gel). It is also recommended to return the LEDs to the original moisture poof bag and to
reseal the moisture proof bag again.
If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should e performed using the following conditions.
Baking treatment: more than 24hours at 65±5℃.
* Please avoid rapid transitions in ambient temperature in high humidity environments where
condensation may occur.
3. Soldering:
Do not apply any stress to the LED lens during soldering while the LED is at high temperature.
Recommended soldering condition.
* Reflow Soldering :
Pre-heat 120~150°C, 120sec. MAX., Peak temperature : 240°C Max. Soldering time : 10 sec Max.
* Soldering Iron : (Not recommended)
Temperature350°C Max., Soldering time : 3 sec. Max.(one time only), power dissipation of iron :
20W Max. use SN60 solder of solder with silver content and don’t to touch LED lens when soldering.
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
13 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
4. Lead-Free Soldering
For Reflow Soldering :
、
℃
1 Pre-Heat Temp: 150-180 ,120sec.Max.
、
℃
2 Soldering Temp: Temperature Of Soldering Pot Over 240 ,40sec.Max.
、
6 ℃，
3 Peak Temperature: 2 0
10sec.
、
4 Reflow Repetition: 2 Times Max.
、
5 Suggest Solder Paste Formula : 93.3 Sn/3.1 Ag/3.1 Bi/0.5 Cu
For Soldering Iron (Not Recommended) :
、
℃
1 Iron Tip Temp: 350 Max.
、
2 Soldering Iron: 30w Max.
、
3 Soldering Time: 3 Sec. Max. One Time.
5. Drive Method
Circuit model A
Circuit model B
(A)Recommended circuit.
(B)The difference of brightness between LED`s could be found due to the Vf-If characteristics of LED.
6. Reliability
1 Criteria For Judging The Damage
、
Criteria for Judgement
MIN. Max.
U.S.L.*) 1.1
Item
Symbol
Test Conditions
Forward Voltage
Reverse Current
VF
IR
IF=20mA
VR=5V
-
-
×
U.S.L.*) 2.0
×
Luminous Intensity
IV
IF=20mA
L.S.L**) 0.7
×
-
U.S.L.: Upper Standard Level
*)
**) L.S.L: Lower Standard Level
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
14 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
Part No. : LT650WDT-CW3
REV: A/1
2、Test Items And Results
Number
Reference
Test Item
Test Condition
Standard
Note
of
Damaged
Tsld=260℃,10sec.
(Pre treatment 30
℃,70%,168hrs)
Resistance to Soldering Heat
(Reflow Soldering)
JEITA
ED-4701300 301
2times
0/50
JEITA
ED-4701300 303
Tsld=215℃,3sec.
(Lead Solder)
1time
over 95%
Solder ability (Reflow Soldering)
Thermal Shock
0/50
0/50
0/50
JEITA
ED-4701300 307
-40℃ ~ 100℃
30min. 30min.
100cycles
100cycles
JEITA
-40℃ ~ 25℃~100℃~25℃
Temperature Cycle
ED-4701100 105 30min. 5min. 30min. 5min
JEITA
ED-4701200-
201
High Temperature Storage
Ta=100℃
Ta=60 ,RH=90%
1000hrs.
0/50
0/50
JEITA
ED-4701100 103
Temperature Humidity Storage
Low Temperature Storage
℃
1000hrs.
1000hrs.
1000hrs.
JEITA
ED-4701200 202
Ta=-40
℃
0/50
0/50
Steady State Operating Life
Condition
Ta=25℃,IF=20mA
Ta=85℃,IF=5mA
Steady State Operating Life
of High Temperature
Steady State Operating Life
of High Humidity Heat
7.Others:
500hrs.
500hrs.
0/50
0/50
Ta=60℃,RH=90%,IF=15mA
The appearance and specifications of the product may be modified for improvement without notice.
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27
PAGE
15 of 16
PARA-FOR-068
Release by
PARALIGHT DCC
SURFACE MOUNT DEVICE LED
REV: A/1
Part No. : LT650WDT-CW3
XXXX : Special Code
l PART NO. SYSTEM :
(Such as CCT、Luminous or others)
L – T 65 0 W D T (Z) - X X X X
Z: With zener
(It not be showed if with no zener )
T : Taping for 7 inch reeL
Lens color
C : Water Clear
W : White Diffused
D : Color Diffused
KY : 9mil AlInGap 590nm Super Yellow
KR : 9mil AlInGap 630 nm Super Red
TE(HE) : 14mil AlInGap 624 nm Super Red
TY(HY): 14mil AlInGap590 nm Super Yellow
LB : InGaN ITO rough 470nm Blue
LG(SG) : InGaN ITO rough520nm Green
W : InGaN + YAG White color
……
0 : Single chip
1/2 : Super thin single chip
5/6 : Dual chip
F : Three chip(Full color)
650 :
670 :
020 :
680:
690:
3020 1.3T TYPE
3528 1.9T TYPE
3812 0.6T TYPE
5630 0.9T TYPE
5050 1.5T TYPE
C : PCB Top View Type
T :PLCC Top View Type
S : Side View Type
DRAWING NO. : DS-7B-11-0004
DATE : 2012-3-27 PAGE
16 of 16
PARA-FOR-068
相关型号：
©2020 ICPDF网 联系我们和版权申明