EVPAWEA2A [PANASONIC]
Keypad Switch;型号: | EVPAWEA2A |
厂家: | PANASONIC |
描述: | Keypad Switch 开关 |
文件: | 总3页 (文件大小:95K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Light Touch Switches/EVPAW
3.0 mm 2.0 mm SMD Light Touch Switches
i
Type:
EVPAW
■ Features
● External dimensions: 3.0 mm҂2.0 mm, Height 0.6 mm
● High operability
Equipped with an actuator (push plate)
■ Recommended Applications
● Operation switches for portable electronic equipment
(Mobile phone, Portable audio)
■ Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
E
V
P
A
W
Product Code
Type
Height
■ Specifications
Type
Snap action/Push-on type SPST
10 µA 2 Vdc to 20 mA 15 Vdc (Resistive load)
500 m max.
Rating
Contact Resistance
Insulation Resistance
ȑ
Electrical
50 M min. (at 100 Vdc)
ȑ
Dielectric Withstanding Voltage
Bouncing
250 Vac for 1 minute
10 ms max. (ON, OFF)
1.6 N, 2.4 N, 3.3 N
Operating Force
Travel
Mechanical
Endurance
1.6 N, 2.4 N : 0.13 mm 3.3 N : 0.15 mm
300000 cycles min.
Operating Life
Operating Temperature
Storage Temperature
–40 °C to +85 °C
–40 °C to +85 °C (Bulk)
–20 °C to +60 °C (Taping)
Minimum Quantity/Packing Unit
10000 pcs. Embossed Taping (Reel Pack)
50000 pcs.
Quantity/Carton
Note: Non washable
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Oct. 2012
– ES80 –
Light Touch Switches/EVPAW
■ Dimensions in mm (not to scale)
EVPAW
Embossed Taping)
(
General dimension tolerance : 0.05
( )dimensions are reference dimensions.
This reference specifications are subject to change.
0.6 0.1
(0.385)
A
A'
(φ0.85)
A
A'
Circuit diagram
2-3.69
2-2.85
3.5
3
0.1 max.
Without film
Stencil mask plan
3.8
2.7
A
A'
PWB land pattern for reference
Soldering thickness t=0.08 0.01
✽ If you design different stencil mask and land pattern,
or apply different soldering thickness compared with
our recommended pattern as described above,
please ask us in advance.
Part Numbers
EVPAWBA2A
EVPAWCA2A
EVPAWEA2A
Operating Force
1.6 N
Height
0.6 mm
0.6 mm
0.6 mm
Operating Life
300000 cycles
300000 cycles
300000 cycles
2.4 N
3.3 N
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Oct. 2012
– ES81 –
Light Touch Switches/EVPAW
■ Recommended Reflow Soldering Conditions
MAX.
260
MAX.
240
Fan or Normal Temp.
Fan or Normal Temp.
230
180
217
200
150
130
(Normal Temp.)
(Normal Temp.)
90 to 110
55 to 65
30 to 40
90 30
40 10
Soldering Time (s)
300
Soldering Time (s)
✽
Reflow temperature may vary by location even in the same reflow condition.
Please check the reflow temperature at terminals and at the top of a switch
to make sure the both temperatures are withiin the specification.
If even one of them is out of the specifications, please adjust.
● Embossed Carrier Taping
Tape width=12.0 mm
Feeding hole
Chip pocket
H
J
D
E
F
Taping condition : Lack of products in the middle of taping should be
one MAX, but total quantity specified in the
specifications should be secured.
Peeling off strength of top tape : It should be within 0.2N to 1. ON at
165 degree in peeling off angle.
Joint of carrier tape : One joint per one reel may exist.
t
Tape running direction
Unit: mm
Part No.
Height
A
B
C
D
E
F
G
H
I
J
K
t
+0.15
EVPAW
0.6
12.0 0.3 1.75 0.10 5.5 0.1 8.0 0.1 4.0 0.1 2.0 0.1 1.5 0.3 3.8 0.2 2.3 0.2 0.75 0.20 (10.25)
0.3
–0.10
● Standard Reel Dimensions in mm (not to scale)
G
E
Item
A
B
C
D
E
C
Rate (mm) φ380.0 2.0 φ80.0 1.0 φ13.0 0.5 φ21.0 1.0
2.0 0.5
D
Item
F
G
Rate (mm) 13.5 1.0
17.5 1.0
A
F
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Oct. 2012
– ES82 –
相关型号:
©2020 ICPDF网 联系我们和版权申明