NUP5120X6T2G [ONSEMI]
5−Line Transient Voltage Suppressor Array; 5 ,线路瞬态电压抑制器阵列型号: | NUP5120X6T2G |
厂家: | ONSEMI |
描述: | 5−Line Transient Voltage Suppressor Array |
文件: | 总4页 (文件大小:54K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NUP5120X6
5−Line Transient Voltage
Suppressor Array
This 5−line voltage transient suppressor array is designed for
application requiring transient voltage protection capability. It is
intended for use in over−transient voltage and ESD sensitive
equipment such as cell phones, portables, computers, printers and
other applications. This device features a monolithic common anode
design which protects five independent lines in a single
SOT−563 package.
http://onsemi.com
SOT−563 5−LINE TRANSIENT
VOLTAGE SUPPRESSOR
Features
PIN ASSIGNMENT
• Protects up to 5 Lines in a Single SOT−563 Package
• ESD Rating of Class 3B (Exceeding 8 kV) per Human Body Model
and Class C (Exceeding 400 V) per Machine Model.
• Compliance with IEC 61000−4−2 (ESD) 15 kV (Air), 8 kV (Contact)
• This is a Pb−Free Device
1
2
3
6
5
4
Applications
• Hand Held Portable Applications
• Serial and Parallel Ports
• Notebooks, Desktops, Servers
PIN 1. CATHODE
2. ANODE
3. CATHODE
4. CATHODE
5. CATHODE
6. CATHODE
MAXIMUM RATINGS (T = 25°C, unless otherwise specified)
J
MARKING
DIAGRAM
Symbol
Rating
Value
Unit
P
1
Peak Power Dissipation
8x20 msec double exponential waveform,
(Note 1)
90
W
PK
4
5
SOT−563
CASE 463A
STYLE 6
6
RN MG
G
3
2
1
T
Operating Junction Temperature Range
Storage Temperature Range
−40 to 125
−55 to 150
260
°C
°C
°C
J
RN
M
G
= Specific Device Code
= Month Code
= Pb−Free Package
T
T
STG
L
Lead Solder Temperature – Maximum
(10 seconds)
(Note: Microdot may be in either location)
ESD
Human Body Model (HBM)
Machine Model (MM)
16000
400
V
IEC 61000−4−2 Air (ESD)
IEC 61000−4−2 Contact (ESD)
15000
8000
ORDERING INFORMATION
†
Device
Package
Shipping
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Non−repetitive current pulse per Figure 1.
NUP5120X6T1G SOT−563 4000/Tape & Reel
(Pb−Free)
NUP5120X6T2G SOT−563 4000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
©
Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
December, 2006 − Rev. 4
NUP5120/D
NUP5120X6
ELECTRICAL CHARACTERISTICS (T = 25°C, unless otherwise specified)
J
Parameter
Reverse Working Voltage
Breakdown Voltage
Reverse Leakage Current
Capacitance
Conditions
Symbol
Min
Typ
−
Max
5.0
7.2
0.5
70
Unit
V
(Note 2)
I = 1 mA, (Note 3)
V
RWM
V
6.2
−
6.8
0.01
54
V
T
BR
V
= 3 V
I
mA
pF
RWM
R
V
V
= 0 V, f = 1 MHz (Line to GND)
= 2.5 V, f = 1 MHz (Line to GND)
C
J
−
R
R
2. TVS devices are normally selected according to the working peak reverse voltage (V ), which should be equal or greater than the DC
RWM
or continuous peak operating voltage level.
3. V is measured at pulse test current I .
BR
T
http://onsemi.com
2
NUP5120X6
120
100
80
1000
T = 25 °C
A
100
60
40
20
0
10
0
25
50
75
100
125
150
1
10
100
T , AMBIENT TEMPERATURE (°C)
A
PULSE DURATION (μS)
Figure 2. Peak Power vs. Pulse Duration
Figure 1. Power Derating vs. Ambient
Temperature
60
50
40
30
20
100
10
T = 25 °C
A
T = 25 °C
A
1
10
0
0.1
0
1
2
3
4
5
6
6
8
10
12
14
16
V , REVERSE VOLTAGE (V)
R
V
, CLAMP VOLTAGE (V)
CL
Figure 4. Typical Capacitance vs. Reverse
Voltage
Figure 3. Peak Current vs. Clamp Voltage
1
0.1
1000
100
10
T = 25 °C
A
T = 25 °C
A
T = 125 °C
J
T = 125 °C
J
T = 25 °C
J
T = 25 °C
J
1
0.01
0.001
0.1
0.01
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1
2
3
4
5
6
FORWARD VOLTAGE (V)
REVERSE VOLTAGE (V)
Figure 6. Typical Forward Current vs. Forward
Voltage
Figure 5. Reverse Current vs. Reverse Voltage
http://onsemi.com
3
NUP5120X6
PACKAGE DIMENSIONS
SOT−563, 6 LEAD
CASE 463A−01
ISSUE B
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD
FINISH THICKNESS. MINIMUM LEAD THICKNESS
IS THE MINIMUM THICKNESS OF BASE
MATERIAL.
A
C
−X−
K
6
5
2
4
3
MILLIMETERS
INCHES
B
−Y−
DIM MIN
MAX
1.70
1.30
0.60
0.27
MIN
MAX
0.067
0.051
0.024
0.011
S
J
A
B
C
D
G
J
1.50
1.10
0.50
0.17
0.059
0.043
0.020
0.007
1
0.50 BSC
0.020 BSC
D 56 PL
0.08
0.10
1.50
0.18
0.30
1.70
0.003
0.004
0.059
0.007
0.012
0.067
G
M
0.08 (0.003)
X Y
K
S
STYLE 6:
PIN 1. CATHODE
2. ANODE
3. CATHODE
4. CATHODE
5. CATHODE
6. CATHODE
SOLDERING FOOTPRINT
0.3
0.0118
0.45
0.0177
1.0
0.0394
1.35
0.0531
0.5 0.5
0.0197 0.0197
mm
inches
ǒ
Ǔ
SCALE 20:1
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
NUP5120/D
相关型号:
©2020 ICPDF网 联系我们和版权申明