HCPL0700V [ONSEMI]
8 引脚 SOIC 单沟道低电流,高增益分离达林顿输出光耦合器;型号: | HCPL0700V |
厂家: | ONSEMI |
描述: | 8 引脚 SOIC 单沟道低电流,高增益分离达林顿输出光耦合器 局域网 输出元件 光电 |
文件: | 总14页 (文件大小:634K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
April 2009
HCPL0700, HCPL0701, HCPL0730, HCPL0731
Low Input Current High Gain Split Darlington Optocouplers
Single Channel: HCPL0700, HCPL0701, Dual Channel: HCPL0730, HCPL0731
Features
Description
■ Low input current: 0.5mA
■ Superior CTR: 2000%
The HCPL0700, HCPL0701, HCPL0730 and HCPL0731
optocouplers consist of an AlGaAs LED optically coupled
to a high gain split darlington photodetector housed in a
compact 8-pin small outline package. The HCPL0730
and HCPL0731 devices have two channels per package
for optimum mounting density.
■ Superior CMR – 10 kV/µs
■ CTR guaranteed 0°C to 70°C
■ U.L. Recognized (file# E90700)
■ VDE 0884 recognized (file# 136616)
The split darlington configuration separating the input
photodiode and the first stage gain from the output tran-
sistor permits lower output saturation voltage and higher
speed operation than possible with conventional darling-
ton phototransistor optocoupler.
– approval pending for HCPL0730/0731
■ BSI recognized (file# 8661, 8662)
– HCPL0700/0701 only
Applications
The combination of a very low input current of 0.5mA
and a high current transfer ratio of 2000% makes this
family particularly useful for input interface to MOS,
CMOS, LSTTL and EIA RS232C, while output compati-
bility is ensured to CMOS as well as high fan-out TTL
requirements.
■ Digital logic ground isolation
■ Telephone ring detector
■ EIA-RS-232C line receiver
■ High common mode noise line receiver
■ µP bus isolation
■ Current loop receiver
Schematics
VCC
8
VCC
+
1
N/C 1
8
VF1
_
V01
7
VB
+
2
3
2
3
4
7
6
5
VF
_
_
V02
VO
6
5
Truth Table
VF2
LED
ON
V
O
GND
GND
N/C
+
4
LOW
OFF
HIGH
HCPL0700 / HCPL0701
HCPL0730 / HCPL0731
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
Absolute Maximum Ratings (T = 25°C unless otherwise specified)
A
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Value
Units
°C
T
Storage Temperature
Operating Temperature
-40 to +125
-40 to +85
STG
T
°C
OPR
Reflow Temperature Profile (Refer to page 12)
EMITTER
I (avg)
DC/Average Forward Input Current
Peak Forward Input Current (50% duty cycle, 1 ms P.W.)
Peak Transient Input Current - (≤1 µs P.W., 300 pps)
Reverse Input Voltage
20
40
1.0
5
mA
mA
A
F
I (pk)
F
I (trans)
F
V
P
V
R
D
Input Power Dissipation
35
mW
DETECTOR
(avg)
I
Average Output Current (Pin 6)
60
0.5
mA
V
O
V
Emitter-Base Reverse Voltage
Supply Voltage, Output Voltage
HCPL0700/HCPL0701
HCPL0700/HCPL0730
HCPL0701/HCPL0731
EBR
V
, V
-0.5 to 7
-0.5 to 18
100
V
CC
O
P
Output power dissipation
mW
D
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
2
Electrical Characteristics (T = 0 to 70°C unless otherwise specified)
A
Individual Component Characteristics
Symbol
EMITTER
Parameter
Test Conditions
Device
Min. Typ.* Max Unit
V
Input Forward
Voltage
I = 1.6mA
T = 25°C
HCPL0700/01
1.0
5.0
1.25
1.35
1.7
V
F
F
A
HCPL0730/31
All
All
1.75
BV
Input Reverse
T =25°C, I = 10µA
A R
R
Breakdown Voltage
DETECTOR
Logic High Output I = 0mA, V = V = 18V
I
HCPL0701/31
HCPL0700/30
0.01
0.01
0.4
0.8
1
100
250
1.5
3
µA
OH
F
O
CC
Current
I = 0mA, V = V = 7V
F
O
CC
I
Logic Low Supply
Current
I = 1.6mA, V = Open, V = 18V HCPL0700/01
mA
CCL
F
O
CC
I
= I = 1.6mA, V = 7V
HCPL0730
HCPL0731
HCPL0700/01
HCPL0730
HCPL0731
F1
F2
CC
V
= V = Open, V = 18V
O2 CC
O1
I
Logic High
I = 0mA, V = Open, V = 18V
10
20
µA
CCH
F
O
CC
Supply Current
I
= I = 0, V = 7V
0.001
0.01
F1
F2
CC
V
= V = Open, V = 18V
O2 CC
O1
Transfer Characteristics
Symbol
Parameter
Test Conditions
Device
Min. Typ.* Max. Unit
CTR
COUPLED
I = 0.5mA, V = 0.4 V, V = 4.5V
HCPL0701/31
HCPL0700
HCPL0701
HCPL0730
HCPL0731
400
300
500
300
500
5000
2600
2600
5000
5000
0.4
%
F
O
CC
Current Transfer
Ratio (Note 1, 2)
I = 1.6mA,
F
V = 0.4 V,
O
V
= 4.5V
CC
V
Logic Low Output I = 0.5mA, I = 2mA, V = 4.5V
Voltage
HCPL0701
HCPL0731
V
OL
F
O
CC
I = 1.6mA, I = 8mA, V = 4.5V
0.4
F
O
CC
I = 5mA, I = 15mA, V = 4.5V
0.4
F
O
CC
I = 12mA, I = 24mA, V = 4.5V
0.4
F
O
CC
I = 1.6mA, I = 4.8mA, V = 4.5V HCPL0700/0730
0.4
F
O
CC
Isolation Characteristics
Symbol Characteristics
Test Conditions
Min.
Typ.*
Max.
Unit
I
Input-Output
Insulation Leakage Current
Relative humidity = 45%,
T = 25°C, t = 5 s,
1.0
µA
I-O
A
V
= 3000 VDC (Note 4)
I-O
V
Withstand Insulation Test
Voltage
R
≤ 50%, T = 25°C,
≤ 2µA, t = 1 min.
2500
V
RMS
ISO
H
A
I
I-O
(Note 4, 5)
12
R
Resistance (Input to Output)
V
= 500 VDC (Note 4)
10
Ω
I-O
I-O
*All typicals at T = 25°C
A
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
3
Electrical Characteristics (T = 0 to 70°C unless otherwise specified)
A
Switching Characteristics (V = 5V)
CC
Symbol
Parameter
Test Conditions
Device
HCPL0701
Min. Typ.* Max. Unit
T
Propagation Delay R = 4.7kΩ, I = 0.5mA
Time to Logic Low
(Note 2) (Fig. 14)
30
120
25
100
2
µs
PHL
L
F
HCPL0731
T = 25°C
HCPL0701
3
5
A
HCPL0731
R = 270 Ω, I = 12mA
HCPL0701
L
F
HCPL0731
3
T = 25°C
HCPL0701
0.3
0.4
1
A
HCPL0731
2
R = 2.2 kΩ, I = 1.6mA
HCPL0700
15
25
10
20
90
60
10
15
7
L
F
HCPL0730/0731
HCPL0700
T = 25°C
1
2
A
HCPL0730/0731
HCPL0701/31
HCPL0701/31
HCPL0701
T
Propagation Delay R = 4.7 kΩ, I = 0.5mA
µs
PLH
L
F
Time to Logic High
(Note 2) (Fig. 14)
T = 25°C
12
A
R = 270 Ω, I = 12mA
L
F
HCPL0731
T = 25°C
HCPL0701
1.6
1.6
A
HCPL0731
10
50
35
R = 2.2 kΩ, I = 1.6mA
HCPL0700/30/31
HCPL0700/30/31
ALL
L
F
T = 25°C
7
A
|CM | Common Mode
I = 0mA, |V | = 10 V
P-P
,
1,000 10,000
V/µs
V/µs
H
F
CM
Transient
Immunity at
Logic High
T = 25°C, R = 2.2kΩ
(Note 3) (Fig. 15)
A L
|CM | Common Mode
I = 1.6mA, |V | = 10 V
,
ALL
1,000 10,000
L
F
CM
P-P
Transient
T = 25°C, R = 2.2 kΩ
A L
Immunity at
Logic Low
(Note 3) (Fig. 15)
*All typicals at T = 25°C
A
Notes:
1. Current Transfer Ratio is defined as a ratio of output collector current, I , to the forward LED input current, I ,
O
F
times 100%.
2. Pin 7 open. Use of a resistor between pins 5 and 7 will decrease gain and delay time.
3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dV /dt on the
CM
leading edge of the common mode pulse signal, V , to assure that the output will remain in a logic high state
CM
(i.e., V > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dV /dt
O
CM
on the trailing edge of the common mode pulse signal, V , to assure that the output will remain in a logic low state
CM
(i.e., V <0.8 V).
O
4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
5. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration.
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
4
Typical Performance Curves
Fig. 1 Propagation Delay vs.Temperature
(HCPL0700, HCPL0701)
Fig. 2 Propagation Delay vs.Temperature
(HCPL0700, HCPL0701)
35
30
20
18
16
14
12
10
8
V
I
R
= 5 V
CC
I
V
R
= 1.6 mA
= 5 V
= 2.2 kΩ
= 0.5 mA
= 4.7 kΩ
F
F
t
PLH
t
PLH
CC
L
1/f = 50 µs
L
25
20
15
10
5
1/f = 50 µs
6
4
t
PHL
t
2
PHL
0
0
-60
-40
-20
0
20
40
60
80
100
-60
-40
-20
0
20
40
60
80
100
T
- TEMPERATURE (˚C)
T - TEMPERATURE (˚C)
A
A
Fig. 3 Propagation Delay vs.Temperature
(HCPL0700, HCPL0701)
Fig. 4 Logic High Output Current vs.Temperature
(HCPL0700, HCPL0701)
4
3
2
1
0
I
V
R
= 12 mA
= 5 V
V
= V = 5.5 V
O
F
1000
100
10
CC
CC
= 270 Ω
1/f = 50 µs
L
t
PLH
1
0.1
0.01
t
PHL
-40
-20
0
20
40
60
80
100
-60
-40
-20
0
20
40
60
80
100
T
- TEMPERATURE (˚C)
T
- TEMPERATURE (˚C)
A
A
Fig. 5 Propagation Delay vs. Input Forward Currrent
(HCPL0730, HCPL0731)
Fig. 6 Output Current vs. Input Forward Current
(HCPL0700, HCPL0701)
100
10
20
TA = 25
VCC = 5V
16
12
8
tPLH
T
= 85˚C
A
RL = 4.7kΩ
tPLH
1
RL = 2.2kΩ
T
T
T
T
= 70˚C
= 25˚C
= 0˚C
A
A
A
A
0.1
0.01
4
0
tPHL
V
V
= 5V
CC
= 0.4V
= -40˚C
RL = 2.2kΩ or 4.7kΩ
O
0.01
0.1
1
10
0
1
2
3
4
5
6
7
8
9
10
I
- INPUT FORWARD CURRENT (mA)
T
- TEMPERATURE (˚C)
F
A
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
5
Typical Performance Curves (Continued)
Fig. 7 Input Forward Current vs. Forward Voltage
Fig. 8 Input Forward Current vs. Forward Voltage
(HCPL0730, HCPL0731)
(HCPL0700, HCPL0701)
100
100
10
T
T
= 85˚C
= 70˚C
A
A
10
1
TA = 85°C
TA = -40°C
TA = 70°C
1
TA = 25°C
TA
= 0°C
0.1
0.1
T
T
T
= 25˚C
= 0˚C
A
A
A
0.01
0.001
0.01
0.001
= -40˚C
1.1
1.2
1.3
1.4
1.5
1.6
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
V
F
- FORWARD VOLTAGE (V)
V - FORWARD VOLTAGE (V)
F
Fig. 10 Supply Current vs. Input Forward Current
(HCPL0730, HCPL0731)
Fig. 9 Logic Low Supply Current vs. Input Forward Current
(HCPL0700, HCPL0701)
10
1.0
0.1
0.5
TA = 25°C
Logic Low Supply Current vs.
Input Forward Current
V
= 18V
0.4
0.3
0.2
0.1
0.0
CC
V
= 18V
CC
V
= 7V
CC
V
= 5V
CC
0.01
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0.1
1
10
I
- INPUT FORWARD CURRENT (mA)
I - INPUT FORWARD CURRENT (mA)
F
F
Fig. 11 DC Transfer Characteristics
(HCPL0700, HCPL0701)
Fig. 12 DC Transfer Characteristics
(HCPL0730, HCPL0731)
80
60
40
20
0
140
120
100
80
TA = 25°C
I
I
I
I
I
I
= 5.0mA
= 4.5mA
= 4.0mA
= 3.5mA
= 3.0mA
= 2.5mA
F
F
F
F
F
F
VCC = 5V
IF = 5mA
IF = 4.5mA
4mA
3.5mA
V
= 5V
CC
T
= 25˚C
A
3mA
I
I
= 2.0mA
= 1.5mA
F
2.5mA
60
F
2mA
1.5mA
1mA
I
= 1.0mA
= 0.5mA
40
F
I
F
20
0
0.5mA
0
1
2
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
V
- OUTPUT VOLTAGE (V)
V - OUTPUT VOLTAGE (V)
O
O
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
6
Typical Performance Curves (Continued)
Fig. 13 Current Transfer Ratio vs. Input Forward Current
(HCPL0700, HCPL0701)
3500
3000
2500
2000
1500
1000
500
V
V
= 5V
CC
= 0.4V
O
T
= 85°C
A
T
= 70°C
A
T
= 25°C
A
T
= 0°C
A
T
= -40°C
A
0
0.1
1
10
I
- INPUT FORWARD CURRENT (mA)
F
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
7
Test Circuits
Noise
Shield
Noise
Shield
+
IF
VCC
VCC
+5 V
+5 V
8
7
6
5
1
2
8
7
6
5
Pulse
Z
= 50
V
L
VF1
0.1 µF
Generator
tr = 5ns
IF
VB
V01
10% DUTY CYCLE
I/f < 100 µS
VO
RL
Z
= 50 V
2
3
4
VF
I/ < 100µs
C
= 15 pF*
VO
V02
VO
IF
VF2
+
0.1 µF
MONITOR
I
Monitor
GND
Rm
4
Rm
CL = 15 pF*
GND
Test Circuit for HCPL-0700 and HCPL-0701
Test Circuit for HCPL-0730 and HCPL-0731
IF
5 V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 14 Switching Time Test Circuit
IF
Noise
Shield
Noise
Shield
VCC
VCC
V01
V02
+
+5 V
+5 V
VO
2
3
4
8
7
6
5
2
3
8
7
6
5
IF
VF1
RL
VB
RL
A
VF
0.1 µF
A
B
B
VO
VO
VFF
VF2
+
0.1 µF
VFF
GND
GND
VCM
+
VCM
+
Pulse Gen
Pulse Gen
Test Circuit for HCPL-0730 and HCPL-0731
Test Circuit for HCPL-0700 and HCPL-0701
V
CM
10 V
90% 90%
10%
10%
tf
0 V
tr
VO
5 V
Switch at A : I = 0 mA
VO
VOL
Switch at B : I = 1.6 mA
Fig. 15 Common Mode Immunity Test Circuit
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
8
Ordering Information
Option
V
Part Number Example
Description
HCPL0700V
HCPL0700R2
HCPL0700R2V
VDE 0884
R2
Tape and reel (2500 units per reel)
R2V
VDE 0884, Tape and reel (2500 units per reel)
Marking Information
1
2
700
6
V
X YY S
5
3
4
Definitions
1
2
Fairchild logo
Device number
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
3
4
5
6
One digit year code, e.g., ‘3’
Two digit work week ranging from ‘01’ to ‘53’
Assembly package code
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
9
Carrier Tape Specification
8.0 ± 0.10
2.0 ± 0.05
3.50 ± 0.20
Ø1.5 MIN
1.75 ± 0.10
0.30 MAX
4.0 ± 0.10
5.5 ± 0.05
12.0 ± 0.3
8.3 ± 0.10
5.20 ± 0.20
Ø1.5 ± 0.1
0.1 MAX
6.40 ± 0.20
User Direction of Feed
Dimensions in mm
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
10
Reflow Profile
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
T
P
260
240
220
200
180
160
140
120
100
80
t
P
T
L
Tsmax
t
L
Preheat Area
Tsmin
t
s
60
40
20
0
120
Time 25°C to Peak
240
360
Time (seconds)
Profile Freature
Pb-Free Assembly Profile
150°C
Temperature Min. (Tsmin)
Temperature Max. (Tsmax)
200°C
Time (t ) from (Tsmin to Tsmax)
60–120 seconds
3°C/second max.
217°C
S
Ramp-up Rate (t to t )
L
P
Liquidous Temperature (T )
L
Time (t ) Maintained Above (T )
60–150 seconds
260°C +0°C / –5°C
30 seconds
L
L
Peak Body Package Temperature
Time (t ) within 5°C of 260°C
P
Ramp-down Rate (T to T )
6°C/second max.
8 minutes max.
P
L
Time 25°C to Peak Temperature
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
11
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
相关型号:
©2020 ICPDF网 联系我们和版权申明