FIN1031MTCX [ONSEMI]

3.3V LVDS 4 位高速差分驱动器;
FIN1031MTCX
型号: FIN1031MTCX
厂家: ONSEMI    ONSEMI
描述:

3.3V LVDS 4 位高速差分驱动器

驱动 光电二极管 接口集成电路 驱动器
文件: 总8页 (文件大小:322K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Is Now Part of  
To learn more about ON Semiconductor, please visit our website at  
www.onsemi.com  
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers  
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor  
product management systems do not have the ability to manage part nomenclature that utilizes an underscore  
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain  
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated  
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please  
email any questions regarding the system integration to Fairchild_questions@onsemi.com.  
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number  
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right  
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability  
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON  
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON  
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s  
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA  
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended  
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out  
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor  
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.  
July 2001  
Revised July 2001  
FIN1031  
3.3V LVDS 4-Bit High Speed Differential Driver  
General Description  
Features  
This quad driver is designed for high speed interconnects  
utilizing Low Voltage Differential Signaling (LVDS) technol-  
ogy. The driver translates LVTTL signal levels to LVDS lev-  
els with a typical differential output swing of 350mV which  
provides low EMI at ultra low power dissipation even at  
high frequencies. This device is ideal for high speed trans-  
fer of clock and data.  
Greater than 400Mbs data rate  
3.3V power supply operation  
0.4ns maximum differential pulse skew  
2.0ns maximum propagation delay  
Low power dissipation  
Power OFF protection  
The FIN1031 can be paired with its companion receiver,  
the FIN1032, or any other Fairchild LVDS receiver.  
Meets or exceeds the TIA/EIA-644 LVDS standard  
Pin compatible with equivalent RS-422 and LVPECL  
devices  
16-Lead SOIC and TSSOP packages save space  
Ordering Code:  
Order Number Package Number  
Package Description  
FIN1031M  
M16A  
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow  
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide  
FIN1031MTC  
MTC16  
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.  
Function Table  
Connection Diagram  
Inputs  
Outputs  
DIN  
DOUT+  
DOUT−  
EN  
H
H
H
X
EN  
X
X
X
L
H
H
L
L
H
L
L
Z
L
H
H
L
L
OPEN  
H
X
L
L
H
H
Z
X
L
OPEN  
X
L
H
H = HIGH Logic Level  
X = Don’t Care  
L = LOW Logic Level  
Z = High Impedance  
Pin Descriptions  
Pin Name  
Description  
LVTTL Data Inputs  
DIN1, DIN2, DIN3, DIN4  
DOUT1+, DOUT2+, DOUT3+, DOUT4+ Non-Inverting Driver Outputs  
DOUT1, DOUT2, DOUT3, DOUT4Inverting Driver Outputs  
EN  
Driver Enable Pin  
EN  
VCC  
GND  
Inverting Driver Enable Pin  
Power Supply  
Ground  
© 2001 Fairchild Semiconductor Corporation  
DS500507  
www.fairchildsemi.com  
Absolute Maximum Ratings(Note 1)  
Recommended Operating  
Conditions  
Supply Voltage (VCC  
)
0.5V to +4.6V  
DC Input Voltage (VIN  
@VCC 3V  
)
Supply Voltage (VCC  
Input Voltage (VIN  
Operating Temperature (TA)  
)
3.0V to 3.6V  
0 to VCC  
0.5V to +6V  
)
@VCC = 0V  
0.5V to +4.6V  
40°C to +85°C  
DC Output Voltage (VOUT  
)
@VCC = 0V  
0.5V to +4.6V  
Continuous  
Driver Short Circuit Current (IOSD  
)
Storage Temperature Range (TSTG  
Max Junction Temperature (TJ)  
Lead Temperature (TL)  
)
65°C to +150°C  
150°C  
Note 1: The Absolute Maximum Ratings: are those values beyond which  
damage to the device may occur. The databook specifications should be  
met, without exception, to ensure that the system design is reliable over its  
power supply, temperature and output/input loading variables. Fairchild  
does not recommend operation of circuits outside databook specification.  
(Soldering, 10 seconds)  
260°C  
8000V  
600V  
ESD (Human Body Model)  
ESD (Machine Model)  
DC Electrical Characteristics  
Over supply voltage and operating temperature ranges, unless otherwise specified  
Min  
Typ  
(Note 2)  
350  
Max  
Symbol  
VOD  
Parameter  
Test Conditions  
Units  
mV  
mV  
V
Output Differential Voltage  
VOD Magnitude Change from  
Differential LOW-to-HIGH  
Offset Voltage  
250  
450  
25  
VOD  
R
L = 100, Driver Enabled,  
VOS  
See Figure 1  
1.125  
1.25  
1.375  
25  
VOS  
Offset Magnitude Change from  
Differential LOW-to-HIGH  
Power Off Output Current  
Short Circuit Output Current  
mV  
µA  
IOFF  
IOS  
V
V
V
CC = 0V, VOUT = 0V or 3.6V  
OUT = 0V, Driver Enabled  
OD = 0V, Driver Enabled  
±20  
6  
mA  
±6  
VIH  
VIL  
IIN  
Input HIGH Voltage  
Input LOW Voltage  
Input Current  
2.0  
VCC  
0.8  
±20  
V
V
GND  
V
IN = 0V or VCC  
µA  
IOZ  
Disabled Output Leakage Current  
EN = 0.8V, EN = 2.0V  
±20  
±20  
µA  
V
V
OUT = 0V or 4.7V  
II(OFF)  
VIK  
Power-OFF Input Current  
Input Clamp Voltage  
CC = 0V, VIN = 0V or 3.6V  
µA  
IIK = −18 mA  
1.5  
V
ICC  
Power Supply Current  
No Load, VIN = 0V or VCC, Driver Enabled  
3.2  
3.2  
17.9  
7
5
5
RL = 100 , Driver Disabled  
mA  
RL = 100 , VIN = 0V or VCC, Driver Enabled  
25  
CIN  
Input Capacitance  
Output Capacitance  
pF  
pF  
COUT  
4
Note 2: All typical values are at TA = 25°C and with VCC = 3.3V.  
www.fairchildsemi.com  
2
AC Electrical Characteristics  
Over supply voltage and operating temperature ranges, unless otherwise specified  
Min  
Typ  
Max  
Symbol  
tPLHD  
Parameter  
Test Conditions  
Units  
ns  
(Note 3)  
Differential Propagation Delay  
LOW-to-HIGH  
0.8  
0.8  
1.4  
1.4  
2.0  
2.0  
tPHLD  
Differential Propagation Delay  
HIGH-to-LOW  
ns  
tTLHD  
tTHLD  
tSK(P)  
tSK(LH)  
tSK(HL)  
tSK(PP)  
fMAX  
Differential Output Rise Time (20% to 80%)  
Differential Output Fall Time (80% to 20%)  
R
L = 100 , CL = 10 pF,  
0.6  
0.6  
0.85  
0.85  
1.2  
1.2  
0.4  
ns  
ns  
ns  
See Figure 2 and Figure 3 (Note 7)  
Pulse Skew |tPLH - tPHL  
|
Channel-to-Channel Skew  
0.3  
1.0  
ns  
(Note 4)  
Part-to-Part Skew (Note 5)  
ns  
MHz  
ns  
Maximum Frequency (Note 6)  
Differential Output Enable Time from Z to HIGH  
Differential Output Enable Time from Z to LOW  
200  
275  
2.5  
2.7  
3.2  
3.4  
tZHD  
5.0  
5.0  
5.0  
5.0  
tZLD  
RL = 100, CL = 10 pF,  
ns  
tHZD  
Differential Output Disable Time from HIGH to Z See Figure 4 and Figure 5 (Note 7)  
Differential Output Disable Time from LOW to Z  
ns  
tLZD  
ns  
Note 3: All typical values are at TA = 25°C and with VCC = 3.3V.  
Note 4: tSK(LH), tSK(HL) is the skew between specified outputs of a single device when the outputs have identical loads and are switching in the same direc-  
tion.  
Note 5: tSK(PP) is the magnitude of the difference in propagation delay times between any specified terminals of two devices switching in the same direction  
(either LOW-to-HIGH or HIGH-to-LOW) when both devices operate with the same supply voltage, same temperature, and have identical test circuits.  
Note 6: fMAX Criteria: Input tR = tF < 1 ns, 0V to 3V, 50% Duty Cycle; Output VOD > 250 mV, 45% to 55% Duty Cycle; all output channels switching in phase.  
Note 7: Test Circuits in Figure 2 and Figure 4 are simplified representations of test fixture and DUT loading.  
3
www.fairchildsemi.com  
Note A: All input pulses have frequency = 10 MHz, tR or tF = 1 ns  
Note B: CL includes all fixture and instrumentation capacitances  
FIGURE 1. Differential Driver DC Test Circuit  
FIGURE 2. Differential Driver Propagation Delay and  
Transition Time Test Circuit  
Note B: All input pulses have the frequency = 10 MHz, tR or tF = 1 ns  
Note A: CL includes all fixture and instrumentation capacitances  
FIGURE 4. Differential Driver Enable and  
Disable Test Circuit  
FIGURE 3. AC Waveforms  
FIGURE 5. Enable and Disable AC Waveforms  
www.fairchildsemi.com  
4
Physical Dimensions inches (millimeters) unless otherwise noted  
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow  
Package Number M16A  
5
www.fairchildsemi.com  
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)  
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide  
Package Number MTC16  
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and  
Fairchild reserves the right at any time without notice to change said circuitry and specifications.  
LIFE SUPPORT POLICY  
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT  
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD  
SEMICONDUCTOR CORPORATION. As used herein:  
1. Life support devices or systems are devices or systems  
which, (a) are intended for surgical implant into the  
body, or (b) support or sustain life, and (c) whose failure  
to perform when properly used in accordance with  
instructions for use provided in the labeling, can be rea-  
sonably expected to result in a significant injury to the  
user.  
2. A critical component in any component of a life support  
device or system whose failure to perform can be rea-  
sonably expected to cause the failure of the life support  
device or system, or to affect its safety or effectiveness.  
www.fairchildsemi.com  
www.fairchildsemi.com  
6
ON Semiconductor and  
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.  
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent  
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.  
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability  
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.  
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,  
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or  
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer  
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not  
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification  
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized  
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and  
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such  
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This  
literature is subject to all applicable copyright laws and is not for resale in any manner.  
PUBLICATION ORDERING INFORMATION  
LITERATURE FULFILLMENT:  
N. American Technical Support: 8002829855 Toll Free  
USA/Canada  
Europe, Middle East and Africa Technical Support:  
Phone: 421 33 790 2910  
Japan Customer Focus Center  
Phone: 81358171050  
ON Semiconductor Website: www.onsemi.com  
Order Literature: http://www.onsemi.com/orderlit  
Literature Distribution Center for ON Semiconductor  
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA  
Phone: 3036752175 or 8003443860 Toll Free USA/Canada  
Fax: 3036752176 or 8003443867 Toll Free USA/Canada  
Email: orderlit@onsemi.com  
For additional information, please contact your local  
Sales Representative  
© Semiconductor Components Industries, LLC  
www.onsemi.com  

相关型号:

FIN1031MTCX_NL

Line Driver, 4 Func, 4 Driver, PDSO16, 4.40 MM, MO-153, TSSOP-16
FAIRCHILD

FIN1031MX

LINE DRIVER|4 DRIVER|SOP|16PIN|PLASTIC
FAIRCHILD

FIN1031MX

3.3V LVDS 4 位高速差分驱动器
ONSEMI

FIN1031MX_NL

Line Driver, 4 Func, 4 Driver, PDSO16, 0.150 INCH, MS-012, SOIC-16
FAIRCHILD

FIN1031M_NL

Line Driver, 4 Func, 4 Driver, PDSO16, 0.150 INCH, MS-012, SOIC-16
FAIRCHILD

FIN1032

3.3V LVDS 4-Bit High Speed Differential Receiver
FAIRCHILD

FIN1032M

LINE RECEIVER|QUAD|DIFFERENTIAL|SOP|16PIN|PLASTIC
FAIRCHILD

FIN1032M

QUAD LINE RECEIVER, PDSO16, 0.150 INCH, MS-012, SOIC-16
ROCHESTER

FIN1032MTC

LINE RECEIVER|QUAD|DIFFERENTIAL|TSSOP|16PIN|PLASTIC
FAIRCHILD

FIN1032MTC

QUAD LINE RECEIVER, PDSO16, 4.40 MM, MO-153, TSSOP-16
ROCHESTER

FIN1032MTCX

LINE RECEIVER|QUAD|DIFFERENTIAL|TSSOP|16PIN|PLASTIC
FAIRCHILD

FIN1032MTCX

QUAD LINE RECEIVER, PDSO16, 4.40 MM, MO-153, TSSOP-16
ROCHESTER