FAN7085MX-GF085 [ONSEMI]
High Side Gate Driver with Recharge FET;型号: | FAN7085MX-GF085 |
厂家: | ONSEMI |
描述: | High Side Gate Driver with Recharge FET 栅 光电二极管 |
文件: | 总13页 (文件大小:430K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FAN7085-GF085
High Side Gate Driver with Recharge FET
Features
Description
•
Qualified to AEC Q100
The FAN7085-GF085 is a high-side gate drive IC with reset
input and built-in recharge FET. It is designed for high voltage
and high speed driving of MOSFET or IGBT, which operates up
to 300V. ON Semiconductor's high-voltage process and
common-mode noise cancellation technique provide stable
operation in the high side driver under high-dV/dt noise
circumstances. Logic input is compatible with standard CMOS
outputs. The UVLO cir-cuits prevent from malfunction when
VCC and VBS are lower than the specified threshold voltage. It
is available with space saving SOIC-8 Package. Minimum
source and sink current capability of output driver is 250mA
and 250mA. Built-in recharge FET to refresh bootstrap circuit is
very useful for circuit topology requiring switches on low and
high side of load.
•
Floating channel designed for bootstrap operation fully oper-
ational up to 300V.
•
•
•
•
•
•
•
•
Tolerance to negative transient voltage on VS pin
dv/dt immune.
Gate drive supply range from 4.5V to 20V
Under-voltage lockout
CMOS Schmitt-triggered inputs with pull-down and pull-up
High side output out of phase with input (Inverted input)
Reset input
Internal recharge FET for bootstrap refresh
SOIC-8
Typical Applications
•
Diesel and gasoline injectors/valves
•
MOSFET-and IGBT high side driver applications
Ordering Information
Operating
Temp.
Device
Package
FAN7085M-GF085
SOIC-8
-40 C ~ 125 C
-40 C ~ 125 C
FAN7085MX-GF085 SOIC-8
X : Tape & Reel type
Publication Order Number:
FAN7085M-GF085/D
©2012 Semiconductor Components Industries, LLC.
September-2017,Rev.2
Block Diagrams
VB
HO
VS
Pulse Filter
Flip Flop
Brake before
make
Under
Voltage Reset
VB to VS
Under Voltage
Reset VCC to GND
VCC
Level Shifter
RESET-
Logic
Pulse
Filter
ON
Delay
Level Shifter
OFF
IN-
GND
Pin Assignments
1
8
7
VB
VCC
IN
2
3
4
HO
6
5
NC
VS
GND
RESET
Pin Definitions
Pin Number
Pin Name
I/O
P
I
Pin Function Description
1
2
3
4
5
6
7
8
VCC
IN-
Driver supply voltage, typically 5V
Driver control signal input (Negative Logic)
Ground
GND
RESET-
VS
P
I
Driver enable input signal (Negative Logic)
High side floating offset for MOSFET Source connection
No connection (No Bond wire)
P
-
NC
HO
A
P
High side drive output for MOSFET Gate connection
Driver output stage supply
VB
www.onsemi.com
2
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are abso-
lute voltages referenced to GND.
Parameter
Symbol
VBS
Min.
-0.3
-5
Max.
25
Unit
High side floating supply voltage
V
V
High side driver output stage voltage
VB
325
Neg. transient: 0.5 ms, external MOSFET off
High side floating supply offset voltage
Neg. transient 0.2 us
Vs
-25
300
V
High side floating output voltage
Supply voltage
VHO
VCC
VIN
VS-0.3
-0.3
VB+0.3
25
V
V
Input voltage for IN-
-0.3
Vcc+0.3
Vcc+0.3
0.625
200
V
Input voltage for RESET-
Power Dissipation 1)
Thermal resistance, junction to ambient 1)
VRES
Pd
-0.3
V
W
Rthja
VESD
C/W
V
Electrostatic discharge voltage
(Human Body Model)
1.5K
500
Charge device model
Junction Temperature
Storage Temperature
VCDM
Tj
V
150
150
C
C
TS
-55
Note: 1) The thermal resistance and power dissipation rating are measured bellow conditions;
JESD51-2: Integrated Circuit Thermal Test Method Environmental Conditions - Natural condition(StillAir)
JESD51-3: Low Effective Thermal Conductivity Test Board for Leaded Surface Mount Package
Recommended Operating Conditions
For proper operation the device should be used within the recommended conditions.-40°C <= Ta <= 125°C
Parameter
Symbol
Min.
Max.
Unit
High side floating supply voltage(DC)
Transient:-10V@ 0.2 us
VB
VS+4.5
VS+20
V
V
V
High side floating supply offset voltage(DC)
@VBS=7V
VS
VS
-3
300
300
High side floating supply offset voltage(Transient)
0.2us @VBS<25V
-25
High side floating output voltage
Allowable offset voltage Slew Rate 1)
Supply voltage for logic part
Input voltage for IN-
VHO
dv/dt
Vs
-
VB
50
V
V/ns
V
VCC
4.5
0
20
VIN
Vcc
Vcc
200K
-
V
Input voltage for RESET-
Switching frequency 2)
Minimum low input width 3)
Minimum high input width 3)
Minimum operating voltage of VB related to GND
Ambient temperature
VRESET
Fs
0
V
Hz
ns
ns
V
tIN(low,min)
tIN(high,min)
560
60
4
-
4)
VB(MIN)
-
Ta
-40
125
C
Note: 1) Guaranteed by design.
2) Duty = 0.5, VBS >=7V
3) Guaranteed by design. Pulse widths below the specified values, may be ignored. Output will either follow the input signal or will ignore it.
No false output state is guaranteed when minimum input width is smaller than tin
4) Guaranteed by design
www.onsemi.com
3
Statics Electrical Characteristics
Unless otherwise specified, -40°C <= Ta <= 125°C, VCC = 5V, VBS = 7V, VS = 0V, VRESET = 5V, RL = 50, CL = 2.5nF.
Parameter
Symbol
Conditions
Min.
Typ. Max. Unit
VCC and VBS Supply Characteristics
VCC and VBS supply under voltage
positive going threshold
VCCUV+
VBSUV+
Vcc and VBS rising from 0V
-
3.7
3.4
0.3
4.3
V
V
V
VCC and VBS supply under voltage
negative going threshold
VCCUV-
VBSUV-
Vcc and VBS dropping from 5V
-
2.8
0.02
-
-
VCC and VBS under voltage hysteresis
VCCUVH
VBSUVH
Under voltage lockout response time
tduvcc
tduvbs
VCC: 6.5V->2.4V or 2.4V->6.5V
VBS: 6.5V->2.4V or 2.4V->6.5V
0.5
0.5
20
20
us
us
Offset supply leakage current
Quiescent Vcc supply current
Quiescent VBS supply current
ILK
VB=VS=300V
Vcc=20V
-
-
-
-
200
500
100
uA
uA
uA
IQCC
IQBS1
Static mode,
VBS=7V, VIN=0 or 5V
Quiescent VBS supply current
IQBS2
Static mode,
VBS=16V, VIN=0 or 5V
200
210
uA
VBS drop due to output turn-on
(Design guaranty)
VBS
VBS=7V, Cbs=1uF, tdIG-IN =3uS,
tTEST=100uS
mV
Input Characteristics
High logic level input voltage for IN-
Low logic level input voltage for IN-
Low logic level input bias current for IN-
High logic level input bias current for IN-
Full up resistance at IN
VIH
VIL
0.6VCC
-
-
-
V
V
-
0.28VCC
IIN-
VIN=0
5
-
25
-
60
uA
uA
V
IIN+
VIN=5V
5
1000
-
RIN
83
200
-
High logic level input voltage for RESET-
Low logic level input voltage for RESET-
High logic level input current for RESET-
Low logic level input bias current for RESET-
Full down resistance at RESET-
Output characteristics
VRH
VRL
IRES+
IRES-
RRES
0.6Vcc
0.28Vcc
60
V
VRESET=5V
VRESET=0
5
25
uA
uA
5
83
200
1000
High level output voltage, VB - VHO
Low level output voltage, VHO-GND
Peak output source current
VOH
VOL
IO+
IO=0
IO=0
-
-
0.1
0.1
-
V
V
-
-
VIN=5V
VIN=0
250
250
450
450
15.5
15.5
mA
mA
Peak output sink current
IO-
-
Equivalent output resistance
ROP
RON
28
28
Recharge Characteristics
Recharge TR turn-on propagation delay
Recharge TR turn-off propagation delay
Recharge TR on-state voltage drop
Dead Time Characteristics
Ton_rech
Toff_rech
VRECH
4
7.9
0.2
9.8
0.4
1.2
us
us
V
Is=1mA, VIN=5V @125C
High side turn-off to recharge gate turn-on
Recharge gate turn-off to high side turn-on
DTHOFF
DTHON
Vcc=5V, VS=7V
Vcc=5V, VS=7V
4
7.8
0.4
9.8
0.7
us
us
0.1
Note: The input parameter are referenced to GND. The VO and IO parameters are referenced to GND.
www.onsemi.com
4
Dynamic Electrical Characteristics
Unless otherwise specified, -40°C <= Ta <= 125°C, VCC = 5V, VBS = 7V, VS = 0V, VRESET = 5V, RL = 50, CL = 2.5nF.
Parameter
Symbol
Conditions
Min. Typ. Max. Unit
Input-to-output turn-on propagation delay
tplh
50% input level to 10% output level,
VS = 0V
0.56
1
us
Input-to-output turn-off propagation delay
tphl
50% input level to 90% output level
VS = 0V
-
0.15
0.5
us
RESET-to-output turn-off propagation delay
RESET-to-output turn-on propagation delay
Output rising time
tphl_res
tplh_res
tr1
50% input level to 90% output level
50% input level to 10% output level
Tj=25C
-
-
-
0.17
0.56
65
-
0.5
1
us
us
ns
ns
ns
ns
ns
ns
ns
ns
200
400
200
400
200
300
200
300
tr2
tr3
Tj=25C,VBS=16V
VBS=16V
65
-
tr4
Output falling time
tf1
Tj=25C
-
25
-
tf2
tf3
Tj=25C,VBS=16V
25
-
tf4
VBS=16V
www.onsemi.com
5
Application Information
1. Logic Tables
VCC
< VCCUVLO-
X
VBS
RESET-
X
IN-
X
Ho
OFF
OFF
OFF
ON
RechFET
ON
X
X
LOW
X
X
ON
X
X
HIGH
LOW
LOW
ON
> VCCUVLO+
> VCCUVLO+
> VBSUVLO+
< VBSUVLO-
HIGH
HIGH
OFF
OFF
OFF
Notes:
X means independent from signal
IN-=LOW indicates that the high side NMOS is ON
IN-=HIGH indicates that the high side NMOS is OFF
RechFET =ON indicates that the recharge MOSFET is ON
RechFET =OFF indicates that the recharge MOSFET is OFF
www.onsemi.com
6
Typical Application Circuit
1. Typical Application Circuit
Up to 300V
D1
VCC
VCC
VB
HO
NC
R1
R2
Load
IN-
GND
C3
C2
RESET- VS
C1
2. Application Example
Voltage Source
R1
From Charge Pump
5V
D5
VCC
VB
HO
NC
S1
IN-
R2
GND
C3
RESET- VS
C2
C1
Load
D3
R3
R4
S2
D4
From LS Driver
C4
GND
www.onsemi.com
7
Input-Output Waveforms
1. Input/Output Timing Diagrams
IN-
RESET-
90%
90%
VS
10%
10%
tr
tf
VHO
tphl
Recharge
tplh
Toff_rech
Ton_rech
Figure.1 Input and Output Timing Diagram and Switching Time Waveform Definition
2. Reset Timing Diagrams
IN-
RESET-
VHO
tplh_res
tphl_res
Figure.2 Reset and Output Timing Diagram
www.onsemi.com
8
3.VB Drop Voltage Diagram
Ig
IN-
Ig
VCC
IN-
VB
HO
NC
RESET-
50R
1u
GND
RESET- VS
7V
VBdrop
VB-VS
2n5
Brake before make
Figure3.b VB Drop Voltage Test Circuit
Figure3.a VB Drop Voltage Diagram
4.Recommendation Min. Short Pulse Width
Bat1
Bat2
1
2
3
8
7
VB
VCC
Tpulse =560nS
60%
RESET
HO
0.1uF
6
5
IN
N.C
VS
IN
4
COM
28%
FAN7085
Figure 4a.Short Pulse Width Test Circuit and Pulse Width Waveform
142KHz
Less than
430nS Pulse
Width
IN
Abnormal Output
HO
Figure 4b. Abnormal Output Waveform with short pulse width
142KHz
IN
Recommended
pulse width 560nS
HO
Figure 4c. Recommendation of pulse width Output Waveform
www.onsemi.com
9
Performance Graphs
This performance graphs based on ambient temperature -40C ~125C
2.6
2.4
2.2
2.0
1.8
3.2
VBS=7V, RL=50, CL=2.5nF
3.0
VBS=7V, RL=50, CL=2.5nF
2.8
2.6
2.4
Typ.
Typ.
2.2
4.4
4.7
5.0
5.3
5.6
5.9
6.2
6.5
4.4
4.7
5.0
5.3
5.6
5.9
6.2
6.5
Vsupply (V)
Vsupply (V)
Figure 5a. Positive IN and RESET Threshold vs VCC Supply
Figure 5b. Negative IN and RESET Threshold vs VCC Supply
500
2000
VCC=5V
VCC=5V, VBS=7V
Typ.
-40oC
125oC
1600
1200
800
400
0
450
400
350
300
-50
0
50
100
150
5
10
15
20
VBS(V)
Temperature (oC)
Figure6a. Output Sink Current vs VBS Supply
Figure6b. Output Source Current vs Temperature
650
250
VCC=5V,VBS=7V, RL=50, CL=2.5nF
VCC=5V,VBS=7V, RL=50, CL=2.5nF
620
590
560
530
500
200
150
Typ.
Typ.
100
-50
-50
0
50
100
150
0
50
100
150
Temperature(oC)
Temperature (oC)
Figure 7b. Turn-Off Propagation Delay Time vs Temperature
Figure 7a. Turn-On Propagation Delay Time vs Temperature
www.onsemi.com
10
700
650
600
550
500
250
200
150
100
VCC=5V, VBS=7V, RL=50, CL=2.5nF
VCC=5V, VBS=7V, RL=50, CL=2.5nF
Typ.
Typ.
-50
0
50
100
150
-50
0
50
100
150
Temperature (oC)
Temperature (oC)
Figure 8a. RES to Output Turn-On Propagation Delay vs Temperature Figure 8b. RES to Output Turn-Off Propagation Delay vs Temperatur
50
40
30
20
10
0
50
40
30
20
10
0
VCC=5V, RL=50, CL=2.5nF
VCC=5V, RL=50, CL=2.5nF
Typ.
Typ.
-50
0
50
100
150
-50
0
50
100
150
Temperature (oC)
Temperature (oC)
Figure 9. Logic “0” IN Input Current vs Temperature
Figure 10. Logic “1” RESET Input Current vs Temperature
5.0
4.5
5.0
4.5
Max.
4.0
4.0
Max.
Typ.
3.5
3.5
Typ.
3.0
Min.
2.5
Min.
3.0
2.5
2.0
2.0
-50
0
50
100
150
-50
0
50
100
150
Temperature(oC)
Temperature(oC)
Figure 11a. VBS Under Voltage Threshold(+) vs Temperature
Figure 11b. VBS Under Voltage Threshold(-) vs Temperature
www.onsemi.com
11
5.0
4.5
4.0
3.5
3.0
2.5
2.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
Max.
Typ.
Max.
Typ.
Min.
Min.
-50
0
50
100
150
-50
0
50
100
150
Temperature(oC)
Temperature(oC)
Figure 12a. VCC Under Voltage Threshold(+) vs Temperature
Figure 12b. VCC Under Voltage Threshold(-) vs Temperature
10
300
VCC=5v, VBS=7, VRL=50, CL=2.5nF
VCC=5v, VBS=7V, RL=50, CL=2.5nF
260
220
180
8
Typ.
6
Typ.
4
-50
140
-50
0
50
100
150
0
50
100
150
Temperature(oC)
Temperature (oC)
Figure 13. Recharge FET Turn-on Delay time
Figure 14. Recharge FET Turn-off Delay time
10
1.8
1.4
1.0
0.6
0.2
VCC=5v, VBS=7V, RL=50, CL=2.5nF
VCC=5v, VBS=7V, RL=50, CL=2.5nF
8
Typ.
6
Typ.
4
-50
0
50
100
150
0.4
0.6
0.8
1.0
1.2
Temperature (oC)
V (V)
Figure 15. Recharge FET I-V curve
Figure 16. High Side Turn-off to Recharge FET turn-on VS Temperature
www.onsemi.com
12
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
❖
相关型号:
©2020 ICPDF网 联系我们和版权申明