FAN3988IL6X-F113 [ONSEMI]
USB /充电器和过压检测器件;型号: | FAN3988IL6X-F113 |
厂家: | ONSEMI |
描述: | USB /充电器和过压检测器件 光电二极管 |
文件: | 总9页 (文件大小:777K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ON Semiconductor
Is Now
To learn more about onsemi™, please visit our website at
www.onsemi.com
onsemi andꢀꢀꢀꢀꢀꢀꢀand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdonsemi and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
FAN3988
USB/Charger and Over-Voltage Detection Device
Features
Description
The FAN3988 is a USB-connection-monitoring device
used to determine if a standard USB device or a battery-
charging device is connected.
.
.
.
.
.
.
Charger/USB Detection Device
Charger/USB Device Detection Flag
Over-/Under-Voltage Detection Flag
VBUS Supply: 2.7 V to 20 V
The FAN3988 sets the FLAG1 pin to logic HIGH or
LOW as an indicator to the system controller that a
standard USB device or a charger is connected to the
USB port. The FAN3988 also monitors the VBUS for
over- or under-voltage conditions. The FLAG2 pin is set
LOW if VBUS is less than 3.3 V or greater than 6.0 V.
CON of 1.5 pF
6-Lead MicroPak™ MLP Package
The FAN3988 is packaged in a very small 6-lead
MicroPak™ MLP package suitable for small board
space applications, such as mobile phones.
Applications
.
.
Mobile Phones
Handheld Devices
Ordering Information
Operating
Temperature Range
Packing
Method
Part Number
Package
Quantity
FAN3988IL6X
FAN3988IL6X-F113(1)
-40°C to +85°C
6-Lead MicroPak™ MLP Package
Reel
5000
Note:
1. Legacy product number; please order FAN3988IL6X for new designs.
Comparator
OVP
UVP
Logic
Logic
VBUS
Flag 2
STD USB /
Charger
Detect
D-
D+
Flag 1
GND
Figure 1. Block Diagram
Publication Order Number:
© 2007 Semiconductor Components Industries, LLC.
September-2017,Rev.2
FAN3988/D
Pin Configuration
Figure 2. Pin Configuration (Top View)
Pin Definitions
Pin#
Name
Type
Description
1
2
3
4
5
6
Vbus
D-
Input
Input
Power input from charger, USB device, or handheld battery
USB data input
D+
Input
USB data input
Gnd
Flag2
Flag1
Input
Device ground
Output
Output
Over/under-voltage flag output
Charger/standard USB device detect flag
Truth Table
Connection State
VBUS (V)
D-
D+
FLAG1
FLAG2
STD USB Device(2)
STD USB Device
STD USB Device
USB Charger
0
0
Open
Open
LOW
LOW
LOW
HIGH
HIGH
HIGH
LOW
LOW
LOW
HIGH
HIGH
LOW
LOW
HIGH
R to GND
R to GND
Short to D+
Short to D+
Short to D+
Open
R to GND
R to GND
Short to D-
Short to D-
Short to D-
Open
5
5
VBUS > 6 V
> 6
< 3.3
5
VBUS < 3.3 V
PC Data/Charger
Note:
2. See Figure 7.
www.onsemi.com
2
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VBUS
DC Supply Voltage
-0.3
20.0
V
Reliability Information
Symbol
Parameter
Junction Temperature
Min.
Typ.
Max.
Unit
TJ
+150
+150
°C
°C
TSTG
Storage Temperature Range
-65
Thermal Resistance, JEDEC Standard,
Multi-layer Test Boards, Still Air
41
°C/W
JA
ESD Information
Symbol
Parameter
Max.
Unit
Human Body Model, JESD22-A114
Charged Device Model, JESD22-C101
5
2
ESD
Electrostatic Discharge Information
kV
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation.
Recommended operating conditions are specified to ensure optimal performance to the data sheet specifications.
ON Semiconductor does not recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Min.
Typ.
Max.
Unit
TA
Operating Temperature Range
Supply Voltage Range
-40
2.7
+85
°C
V
VBUS
5.0
20.0
www.onsemi.com
3
DC Electrical Characteristics
TA = 25°C and VBUS = 5.0 V, unless otherwise noted.
Symbol
Supply
VBUS
IBUS
Parameter
Condition
Min.
Typ.
Max.
Unit
Supply Voltage Range
VBUS Range
2.7
5.0
1.2
10
20.0
2.0
V
Quiescent Supply Current
Power-Up Stabilization Time
VBUS = +5.0 V, D+ D- Shorted
VBUS = +5.0 V, D+ D- Shorted
mA
ms
tSUPPLY
Input Characteristics
CD+
CD-
Input Capacitance
1.5
1.5
1
2.0
2.0
pF
pF
µA
µA
Input Capacitance
Off Leakage Current
Off Leakage Current
Ioff D+
Ioff D-
VBUS = 0 V or 5 V VIN on D+ = 5 V
VBUS = 0 V or 5 V VIN on D- = 5 V
1
Output Characteristics
Over-Voltage Threshold
Detect
OVDETECT
OVHYST
UVDETECT
UVHYST
VBUS = +5.0 V, Flag2 = LOW
5.8
3.0
2.4
-20
6.0
100
3.3
6.5
3.6
V
mV
V
Voltage Sweep through Upper
and Lower Trip Points
Over-Voltage Hysteresis
Under-Voltage Threshold
Detect
VBUS = +5.0 V, Flag2 = LOW
Voltage Sweep through Upper
and Lower Trip Points
Under-Voltage Hysteresis
100
mV
V
VOH FLAG1/ Minimum HIGH Output
FLAG2 Voltage
VBUS = +5.0 V, IOH = -20 µA
VBUS = +5.0 V, IOL = 20 µA
2.6
0.3
VOL FLAG1/ Maximum LOW Output
FLAG2 Voltage
V
IOH FLAG1/ Minimum HIGH Output
FLAG2 Current
µA
µA
IOL FLAG1/ Maximum HIGH Output
20
FLAG2
Current
USB SDP
D+ = 3V; D- = 0V-3V or 3V-0V
1.025
1.300
1.450
1.365
V
V
(Standard Downstream Port) D- = 3V; D+ = 0V-3V or 3V-0V
D+/D-
Threshold
USB DCP
D+/D- = 0V-3V, 3V-0V
(Dedicated Charging Port)
toff
ton
Flag2 HIGH to LOW
Flag2 LOW to HIGH
100 pF Load
100 pF Load
10
44
ns
ns
www.onsemi.com
4
Typical Performance Characteristics
V =8.0V-21V
CC
V
CC
=2.7V-7.0V
1.8
1.6
1.4
1.2
1
1.00
0.90
0.80
0.70
0.60
0.50
0.40
Icc
I
CC
0.8
0.6
0.4
VCC
V
CC
Figure 3. IBUS vs. vBUS (2.7 V-7.0 V) No Load
Figure 4. IBUS vs. vBUS (8.0V-21 V) No Load
Figure 5. No Fault on Flag 1, Skew=65 ns
Figure 6. PC Data Running D+/D- (Flag 1 and Flag 2 at Correct Levels)
www.onsemi.com
5
Application Information
Std 15K pull-down on D-
input and 1.5K pull-up
on D+ by USB
transceiver.
1.5K
Vdd
Control
Battery
15K
USB Transceiver
Rsense
Vout
Vbus
STD USB
Device
(ie USB
Headphones)
Vbus
D-
Comparator
OVP
UVP
D+
Logic
Logic
Flag 2
Flag 1
Gnd
USB
D-
Std USB/
Charger
Detect
D+
GND
Figure 7. Typical Application System with USB Transceiver
In a condition where D+ and D- are shorted when a
charger is plugged into the USB port, the USB switch is
ON and pulled to VDD, which is about 3.3 V, making both
D+ and D- HIGH and flag1 set HIGH – indicating that a
charging device is connected to the port.
With USB Transceiver (Figure 7)
The FAN3988 sets the FLAG1 pin to logic HIGH or
LOW as an indicator to the system controller that a
standard USB device or a charger is connected to the
USB port. The FAN3988 also monitors the VBUS for
over- or under-voltage conditions. The FLAG2 pin is set
LOW if VBUS is less than 3.3 V or greater than 6.0 V.
In a condition where D+ and D- are connected to a
standard USB device, the D+ is pulled to VDD and D- is
set LOW (due to the 15 kΩ pull-down in the USB
transceiver) and flag1 is LOW.
In a standard USB configuration, there is a switch in the
USB transceiver that is always ON in the full-speed
mode. It is ON during the transition from full-speed
mode to high-speed mode and is turned off after
enumeration is complete.
If D+ and D- are open (floating), D+ is pulled to VDD and
D- floats LOW, which makes flag1 LOW.
www.onsemi.com
6
When a condition exists where a charger is plugged into
the USB port (D+ D- shorted), the voltage divider of
1 MΩ and 5 MΩ puts a voltage of 2.75 V on the D+ D-
inputs and flag1 is HIGH, indicating a charger is
connected to port.
Without USB Transceiver (Figure 8)
The FAN3988 sets the FLAG1 pin to logic HIGH or
LOW as an indicator to the system controller that a
standard USB device or a charger is connected to the
USB port. The FAN3988 also monitors the VBUS for
over- or under-voltage conditions. The FLAG2 pin is set
LOW if VBUS is less than 3.3 V or greater than 6.0 V.
In a condition where the USB port is connected to a
standard USB device, the D+ input is pulled up to VDD
(system supply) in parallel with the 1.5 kΩ on a USB
transceiver with a parallel R value of 1.497 kΩ. The D-
input is connected to a 15 kΩ pull-down by the USB
device and in parallel with 5 MΩ with a parallel R value
of 14.955 kΩ. This condition makes flag1 LOW.
In a condition where a USB transceiver is not
incorporated or there is a switch between the USB port
and the FAN3988, external resistors must be used to
set the correct input logic states on the D+ D- inputs. A
5 MΩ pull-down on the D- line and a 1 MΩ pull-up to
VDD (system supply) on the D+ line are recommended.
If D+ and D- are open (floating), D+ is pulled to VDD
(system supply) and D- floats LOW, which makes
flag1 LOW.
Control
Battery
Rsense
Vbus
Vbus
D-
D+
Flag 2
Comparator
OVP
UVP
Logic
Gnd
USB
D-
Std USB/
Charger
Detect
Logic
D+
Flag 1
GND
5M
1M
Vdd
Figure 8. Typical System Application without USB Transceiver
www.onsemi.com
7
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
❖
相关型号:
FAN400C
Low-Power, Green-Mode, PWM Flyback Power Controller without Secondary Feedback (CC)
FAIRCHILD
FAN400CNY
Low-Power, Green-Mode, PWM Flyback Power Controller without Secondary Feedback (CC)
FAIRCHILD
FAN400CTY
Low-Power, Green-Mode, PWM Flyback Power Controller without Secondary Feedback (CC)
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明