XC5A-4422 [OMRON]
DIN Twin-contact Connectors; DIN双接触连接器
| 型号： | XC5A-4422 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | DIN Twin-contact Connectors |
| 文件： | 总14页 (文件大小：1492K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
XDINCTwi5n-contact Connectors
A Wide Variety of DIN Connectors That
Conform to UL/CSA Standards.
• Fully preserves the characteristics of normal DIN connec-
tors while increasing the number of terminals available.
• Meets world market needs with products ranging from one-
piece connectors (card edge) to two-piece connectors.
• Uses a twin-contact system for high reliability and low cost.
• Lower insertion force as a result of FEM analysis tech-
niques.
• Conform to UL standards (file no. E 103202) and CSA stan-
dards (file no. LR 62678).
■ Low Insertion Force Design
■ Structure
Twin Contacts
2R
Without R
(2-point Contact System)
45°
(DIN standard)
With R
0.6 mm (DIN standard)
The shape of the Plug contact tip is
based on the DIN standard dimensions,
however, a small radius, R, has been
introduced between the shaft and the
tip. This results in less force being
required for insertion.
Socket contact
Plug contact
■ Connector Styles
Double-row Connectors
Triple-row Connectors
Model
XC5A
B type
XC5B
B type
XC5E
Q type
XC5F
Q type
Model
XC5C
C type
XC5D
C type
XC5G
R type
XC5H
R type
Appearance
Appearance
Socket with
straight
terminals
Socket with
straight
terminals
Plug with
straight
terminals
Plug with
straight
terminals
Socket with
right-angle
terminals
Plug with
right-angle
terminals
Socket with
right-angle
terminals
Plug with
right-angle
terminals
■ Ratings and Characteristics
■ Materials and Finish
Rated current
2 A
Item
Plugs
Sockets
Rated voltage
300 VAC
Housings
Fiber-glass reinforced PBT resin (UL94V-0)/
gray
Contact resistance 20 mΩ max. (at 20 mV, 100 mA max.)
Insulation
resistance
Contact Mating Brass/nickel
end
Phosphor bronze/nickel
base, 0.4-μm gold plating
106 MΩ min. (at 100 VDC)
s
base, 0.4-μm
gold plating (See (See note 1.)
note 1.)
Phosphor bronze/nickel
base, tin plating base, tin plating
Dielectric strength 1,000 VAC for 1 min (leakage current:
1 mA max.)
Termina Brass/nickel
l
Connector insertion 0.59 N max. per contact
Contact removal
0.15 N min. (with test gauge, t = 0.56 mm)
Insertion durability 200 times
Note: 1. For non-standard plating specifications, contact OMRON
2. Wrap terminal contacts are made from phosphor bronze.
3. See “Precautions” for information about Wire Wrap terminals
Ambient
Operating: −55 to 125°C (with no icing)
temperature
DIN Twin-contact Connectors XC5
85
XC5A Double-row Plugs, DIN B-type (Standard)
■ Dimensions
XC5A-@@22
(With right-angle through-hole terminals)
Coding Key position
Two, 2.8 dia.
Mounting holes (bottom view)
+0.1
0
0.8
dia.
Two, 2.8 dia.
No. of
Dimensions (mm)
Coding Key positions
(contact No.)
contacts
A
B
C
D
E
F
29.3
44.6
59.8
67.4
85.2
130.9
20
32
44
50
64
100
37.9
32.1
22.86
38.10
53.34
60.96
78.74
33.02
48.26
63.50
71.12
88.90
28.1
3, 8
53.2
68.4
76.0
93.8
139.5
47.4
62.6
70.2
88.0
133.7
43.3
58.5
66.2
83.9
5, 12
4, 9, 14, 19
5, 10, 16, 21
6, 13, 20, 27
10, 20, 31, 41
124.46 134.62 129.7
■ Ordering Information
No. of contacts
Terminal type
Model
20*
Right-angle
through-hole
terminals
XC5A-2022
XC5A-3222
XC5A-4422
XC5A-5022
XC5A-6422
XC5A-0122
32
44*
50*
64
100*
*Marked items have an increased number of contacts while following DIN standards.
86
DIN Twin-contact Connectors XC5
XC5B Double-row Sockets, DIN B-type (Standard)
■ Dimensions
XC5B-@@21
(With straight through-hole terminals)
Two, 2.8 dia.
Coding Key slot
(Straight DIP terminals)
XC5B-@@23
(With straight wrap terminals)
(Straight wrap terminals)
Mounting holes (bottom view)
+0.1
0
1.0
dia. (Wrap terminals)
+0.1
0
Two, 2.8 dia.
0.8
dia. (DIP terminals)
No. of
contacts
Dimensions (mm)
Coding Key slot
positions (contact No.)
A
B
C
D
E
20
32
44
50
64
100
38.9
29.1
44.4
59.6
67.2
85.0
130.7
22.86
38.10
53.34
60.96
78.74
34.12
49.36
64.60
72.22
90.00
27.1
3, 8
54.2
69.4
77.0
94.8
140.5
42.3
57.5
65.2
82.9
5, 12
4, 9, 14, 19
5, 10, 16, 21
6, 13, 20, 27
10, 20, 31, 41
124.46 135.72 128.7
■ Ordering Information
No. of
Terminal type
contacts
Straight Through-hole terminals
XC5B-2021
Straight wrap terminals
XC5B-2023
20*
32
XC5B-3221
XC5B-3223
44*
50*
64
XC5B-4421
XC5B-4423
XC5B-5021
XC5B-5023
XC5B-6421
XC5B-6423
100*
XC5B-0121
XC5B-0123
*Marked items have an increased number of contacts while following DIN standards.
DIN Twin-contact Connectors XC5
87
XC5E Double-row Plugs, DIN Q-type (Reverse)
■ Dimensions
XC5E-@@21
(With straight through-hole terminals)
Two, 2.8 dia.
Coding Key position
XC5E-@@23
(Straight DIP terminals)
(With straight wrap terminals)
(Straight wrap terminals)
Mounting holes (bottom view)
+0.1
0
+0.1
0
Two, 2.8 dia.
0.8
dia. (DIP terminals)
1.0
dia. (Wrap terminals)
No. of
Dimensions (mm)
Coding Key positions
(contact No.)
contacts
A
B
C
D
E
28.1
43.3
58.5
66.2
83.9
F
29.3
44.6
59.8
67.4
85.2
130.9
20
32
44
50
64
100
38.9
32.1
22.86
38.10
53.34
60.96
78.74
34.12
49.36
64.60
72.22
90.00
3, 8
54.2
69.4
77.0
94.8
140.5
47.4
62.6
70.2
88.0
133.7
5, 12
4, 9, 14, 19
5, 10, 16, 21
6, 13, 20, 27
10, 20, 31, 41
124.46 135.72 129.7
■ Ordering Information
No. of
Terminal type
contacts
Straight through-hole terminals
XC5E-2021
Straight wrap terminals
XC5E-2023
20*
32
XC5E-3221
XC5E-3223
44*
50*
64
XC5E-4421
XC5E-4423
XC5E-5021
XC5E-5023
XC5E-6421
XC5E-6423
100*
XC5E-0121
XC5E-0123
*Marked items have an increased number of contacts while following DIN standards.
88
DIN Twin-contact Connectors XC5
XC5F Double-row Sockets, DIN Q-type (Reverse)
■ Dimensions
XC5F-@@22
(With right-angle through-hole terminals)
Coding Key slot
Two, 2.8 dia.
Mounting holes (bottom view)
+0.1
0
0.8
dia.
Two, 2.8 dia.
No. of
contacts
Dimensions (mm)
Coding Key slot
positions (contact No.)
A
B
C
D
E
20
32
44
50
64
100
37.9
29.1
44.4
59.6
67.2
85.0
130.7
22.86
38.10
53.34
60.96
78.74
33.02
48.26
63.50
71.12
88.90
27.1
3, 8
53.2
68.4
76.0
93.8
139.5
42.3
57.5
65.2
82.9
5, 12
4, 9, 14, 19
5, 10, 16, 21
6, 13, 20, 27
10, 20, 31, 41
124.46 134.62 128.7
■ Ordering Information
No. of
contacts
Terminal type
Model
20*
Right-angle
through-hole
terminals
XC5F-2022
XC5F-3222
XC5F-4422
XC5F-5022
XC5F-6422
XC5F-0122
32
44*
50*
64
100*
*Marked items have an increased number of contacts while following DIN standards.
DIN Twin-contact Connectors XC5
89
XC5C Triple-row Plugs, DIN C-type (Standard)
■ Dimensions
XC5C-@@22
(With right-angle through-hole terminals)
Coding Key position
Two, 2.8 dia.
Mounting holes (bottom view)
+0.1
0
0.8
dia.
Two, 2.8 dia.
No. of
Dimensions (mm)
Coding Key positions
(contact No.)
contacts
A
B
C
D
E
43.3
43.3
83.9
83.9
F
44.6
44.6
85.2
85.2
32*
48
53.2
47.4
38.10
38.10
78.74
78.74
48.26
48.26
88.90
88.90
5, 12
53.2
93.8
93.8
47.4
88.0
88.0
5, 12
64*
96
6, 13, 20, 27
6, 13, 20, 27
*Has no center row (row b).
■ Ordering Information
No. of contacts
Terminal type
Model
32*
Right-angle
through-hole
terminals
XC5C-3222
XC5C-4822
XC5C-6422
XC5C-9622
48
64*
96
*Has no center row (row b).
90
DIN Twin-contact Connectors XC5
XC5D Triple-row Sockets, DIN C-type (Standard)
■ Dimensions
XC5D-@@21
(With straight through-hole terminals)
Two, 2.8 dia.
Coding Key slot
XC5D-@@23
(Straight DIP terminals)
(With straight wrap terminals)
(Straight wrap terminals)
Mounting holes (bottom view)
+0.1
0
+0.1
0
1.0
dia. (Wrap terminals)
0.8
dia. (DIP terminals)
Two, 2.8 dia.
No. of
contacts
Dimensions (mm)
Coding Key slot
positions (contact No.)
A
B
C
D
E
32*
48
54.2
44.4
44.4
85.0
85.0
38.10
38.10
78.74
78.74
49.36
49.36
90.00
90.00
42.3
5, 12
54.2
94.8
94.8
42.3
82.9
82.9
5, 12
64*
96
6, 13, 20, 27
6, 13, 20, 27
*Has no center row (row b).
■ Ordering Information
No. of contacts
Terminal type
Straight through-hole terminals
XC5D-3221
Straight wrap terminals
---
32*
48
XC5D-4821
XC5D-4823
XC5D-6423
XC5D-9623
64*
96
XC5D-6421
XC5D-9621
*Has no center row (row b).
DIN Twin-contact Connectors XC5
91
XC5G Triple-row Plugs, DIN R-type (Reverse)
■ Dimensions
XC5G-@@21
(With straight through-hole terminals)
Two, 2.8 dia.
Coding Key position
XC5D-@@23
(Straight DIP terminals)
(With straight wrap terminals)
(Straight wrap terminals)
Mounting holes (bottom view)
+0.1
0
+0.1
0
1.0
dia. (Wrap terminals)
0.8
dia. (DIP terminals)
Two, 2.8 dia.
No. of
Dimensions (mm)
Coding Key positions
(contact No.)
contacts
A
B
C
D
E
F
44.6
85.2
85.2
48
54.2
47.4
38.10
78.74
78.74
49.36
90.00
90.00
43.3
5, 12
64*
96
94.8
94.8
88.0
88.0
83.9
83.9
6, 13, 20, 27
6, 13, 20, 27
*Has no center row (row b).
■ Ordering Information
No. of contacts
Terminal type
Straight through-hole terminals
XC5G-4821
Straight wrap terminals
XC5G-4823
48
64*
96
XC5G-6421
XC5G-6423
XC5G-9621
XC5G-9623
*Has no center row (row b).
92
DIN Twin-contact Connectors XC5
XC5H Triple-row Sockets, DIN R-type (Reverse)
■ Dimensions
XC5H-@@22
(With right-angle through-hole terminals)
Coding Key slot
Two, 2.8 dia.
Mounting holes (bottom view)
+0.1
0
0.8
dia.
Two, 2.8 dia.
No. of
contacts
Dimensions (mm)
Coding Key slot
positions (contact No.)
A
B
C
D
E
48
53.2
93.8
93.8
44.4
85.0
85.0
38.10
78.74
78.74
48.26
88.90
88.90
42.3
5, 12
64*
96
82.9
82.9
6, 13, 20, 27
6, 13, 20, 27
*Has no center row (row b).
■ Ordering Information
No. of contacts
Terminal type
Model
48
Right-angle
through-hole
terminals
XC5H-4822
XC5H-6422
XC5H-9622
64*
96
*Has no center row (row b).
DIN Twin-contact Connectors XC5
93
Tools and Accessories (Sold Separately)
Cut the Coding Key on the Plug and insert
the Coding Key in the Coding Key slots on
the Socket to prevent improper insertion of
the Plug into the Socket.
Coding Cutter
XY2D-0001
1. Cut the Coding Key(s) in the slot in the
plug housing wall with the special cutting
tool (XY2D-0001).
Note: Coding Cutters may not work with
some DIN-style connector combina-
tions. In that case, contact your OM-
RON representative.
Coding Key
XC5Z-0001
2. Insert the special Coding Key
(XC5Z-0001) into the Coding Key slots
in the housing wall of the corresponding
Socket.
Note: 1. Each XC5Z-0001 has four Coding
Keys.
2. Coding Keys may not work with
some DIN-style connector combi-
nations. In that case, contact your
OMRON representative.
Material: PBT resin (UL94HB)/white
Temporary Fastening Pins
XC5Z-0002
Fastening pins (XC5Z-0002) are used to
keep the connector flush against the board
during automated soldering.
(For use with 1.6-mm boards)
Note: 1. For the XC5A, XC5F, XC5C, and
XC5H.
2. Temporary fastening pins cannot be
used with DIN-style connectors.
Dust Cover
XC5T-962
(For DIN41612 C- or R-type Triple-row Plugs with 64 or 96 contacts)
XC5T-963
(For DIN41612 C- or R-type Triple-row Sockets with 64 or 96 contacts)
Material: Polyamide resin (UL94V-2)/white
This cover is for protection against dust only, and should not be used
for flux protection during automated soldering.
94
DIN Twin-contact Connectors XC5
Mating Diagrams
Vertical (Standard)
Vertical (Reverse)
Stacking (See note.)
Horizontal (See note.)
B-type
Socket
XC5B
B-type
Plug
XC5A
Q-type
Socket
XC5F
(Center of
mounting holes)
Q-type Socket
XC5F
B-type Plug
XC5A
Q-type
Plug
XC5E
B-type
Socket
XC5B
Q-type
Plug
XC5E
C-type
Socket
XC5D
R-type
Socket
XC5H
(Center of
mounting holes)
C-type
Plug
XC5C
R-type Socket
XC5H
C-type Plug
XC5C
R-type
Plug
XC5G
C-type
Socket
XC5D
R-type
Plug
XC5G
Note: By combining a Standard and a Reverse Connector, stacking and horizontal connections can be made. In this case, the triangular marks
(terminal number 1) on the Plug and the Socket will not match.
DIN Twin-contact Connectors XC5
95
Precautions
■ Correct Use
Basic Mating Dimensions
Applicable Wrap Post Wire Sizes
Mating dimensions for all Connectors should be as shown in the fol-
lowing diagram.
AWG30, AWG28, AWG26, or AWG24
(Solid wire: 0.25 to 0.51 mm dia.)
Wrap Post Length
Daughter board
3 wires
Soldering
Automated Soldering
Use masking tape to mask Right-angle Connectors before auto-
mated soldering.
Mother board
α: 3.55 mm
Masking tape
The distance between the center line of the mounting holes on the
mother board and the daughter board. (This center line is shifted
0.3 mm toward row a from row b.)
(Recommended tape: 3M Sumitomo #214)
Automated Soldering Conditions (Jet Flow)
β: 2.54 mm
1. Soldering temperature: 250±5°C
2. Continuous soldering time: Within 5 s
The distance between the mounting holes on the daughter board and row a.
γ: 5.3 mm
The distance between the edge of the daughter board and row a.
δ: 12.4 to 14.2 mm
To ensure reliability, be sure to keep the Connectors within these
dimensions when mounting.
The allowable margins for mating the Connectors are shown below.
Plug
1 mm max.
1 mm max.
Socket
96
DIN Twin-contact Connectors XC5
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
(b) Seller:
(c) Buyer:
These terms and conditions
Omron Electronic Components LLC and its subsidiaries
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to non-
citizens of regulated technology or information.
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
VI. MISCELLANEOUS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
DIN Twin-contact Connectors XC5
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro-
dards, codes or regulations which apply to the combination of the Product in
gramming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as
vide applicable third party certification documents identifying ratings and limi-
tations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use.
a guide for the user in determining suitability and does not constitute a war-
ranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be
ticular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
01/10
Specifications subject to change without notice
Printed in USA
Cat. No. X304-E-1
DIN Twin-contact Connectors XC5
相关型号：
©2020 ICPDF网 联系我们和版权申明