XC5B-1631-3 [OMRON]
Board Euro Connector;
| 型号： | XC5B-1631-3 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Board Euro Connector 连接器 |
| 文件： | 总14页 (文件大小：1435K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
XDINCTwi5n-contact Connectors
A Wide Variety of DIN Connectors That
Conform to UL/CSA Standards.
• Fully preserves the characteristics of normal DIN connec-
tors while increasing the number of terminals available.
• Meets world market needs with products ranging from one-
piece connectors (card edge) to two-piece connectors.
• Uses a twin-contact system for high reliability and low cost.
• Lower insertion force as a result of FEM analysis tech-
niques.
• Conform to UL standards (file no. E 103202) and CSA stan-
dards (file no. LR 62678).
■ Low Insertion Force Design
■ Structure
Twin Contacts
2R
Without R
(2-point Contact System)
45°
(DIN standard)
With R
0.6 mm (DIN standard)
The shape of the Plug contact tip is
based on the DIN standard dimensions,
however, a small radius, R, has been
introduced between the shaft and the
tip. This results in less force being
required for insertion.
Socket contact
Plug contact
■ Connector Styles
Double-row Connectors
Triple-row Connectors
Model
XC5A
B type
XC5B
B type
XC5E
Q type
XC5F
Q type
Model
XC5C
C type
XC5D
C type
XC5G
R type
XC5H
R type
Appearance
Appearance
Socket with
straight
terminals
Socket with
straight
terminals
Plug with
straight
terminals
Plug with
straight
terminals
Socket with
right-angle
terminals
Plug with
right-angle
terminals
Socket with
right-angle
terminals
Plug with
right-angle
terminals
■ Ratings and Characteristics
■ Materials and Finish
Rated current
2 A
Item
Plugs
Sockets
Rated voltage
300 VAC
Housings
Fiber-glass reinforced PBT resin (UL94V-0)/
gray
Contact resistance 20 mΩ max. (at 20 mV, 100 mA max.)
Insulation
resistance
Contact Mating Brass/nickel
end
Phosphor bronze/nickel
base, 0.4-μm gold plating
106 MΩ min. (at 100 VDC)
s
base, 0.4-μm
gold plating (See (See note 1.)
note 1.)
Phosphor bronze/nickel
base, tin plating base, tin plating
Dielectric strength 1,000 VAC for 1 min (leakage current:
1 mA max.)
Termina Brass/nickel
l
Connector insertion 0.59 N max. per contact
Contact removal
0.15 N min. (with test gauge, t = 0.56 mm)
Insertion durability 200 times
Note: 1. For non-standard plating specifications, contact OMRON
2. Wrap terminal contacts are made from phosphor bronze.
3. See “Precautions” for information about Wire Wrap terminals
Ambient
Operating: −55 to 125°C (with no icing)
temperature
DIN Twin-contact Connectors XC5
85
XC5A Double-row Plugs, DIN B-type (Standard)
■ Dimensions
XC5A-@@22
(With right-angle through-hole terminals)
Coding Key position
Two, 2.8 dia.
Mounting holes (bottom view)
+0.1
0
0.8
dia.
Two, 2.8 dia.
No. of
Dimensions (mm)
Coding Key positions
(contact No.)
contacts
A
B
C
D
E
F
29.3
44.6
59.8
67.4
85.2
130.9
20
32
44
50
64
100
37.9
32.1
22.86
38.10
53.34
60.96
78.74
33.02
48.26
63.50
71.12
88.90
28.1
3, 8
53.2
68.4
76.0
93.8
139.5
47.4
62.6
70.2
88.0
133.7
43.3
58.5
66.2
83.9
5, 12
4, 9, 14, 19
5, 10, 16, 21
6, 13, 20, 27
10, 20, 31, 41
124.46 134.62 129.7
■ Ordering Information
No. of contacts
Terminal type
Model
20*
Right-angle
through-hole
terminals
XC5A-2022
XC5A-3222
XC5A-4422
XC5A-5022
XC5A-6422
XC5A-0122
32
44*
50*
64
100*
*Marked items have an increased number of contacts while following DIN standards.
86
DIN Twin-contact Connectors XC5
XC5B Double-row Sockets, DIN B-type (Standard)
■ Dimensions
XC5B-@@21
(With straight through-hole terminals)
Two, 2.8 dia.
Coding Key slot
(Straight DIP terminals)
XC5B-@@23
(With straight wrap terminals)
(Straight wrap terminals)
Mounting holes (bottom view)
+0.1
0
1.0
dia. (Wrap terminals)
+0.1
0
Two, 2.8 dia.
0.8
dia. (DIP terminals)
No. of
contacts
Dimensions (mm)
Coding Key slot
positions (contact No.)
A
B
C
D
E
20
32
44
50
64
100
38.9
29.1
44.4
59.6
67.2
85.0
130.7
22.86
38.10
53.34
60.96
78.74
34.12
49.36
64.60
72.22
90.00
27.1
3, 8
54.2
69.4
77.0
94.8
140.5
42.3
57.5
65.2
82.9
5, 12
4, 9, 14, 19
5, 10, 16, 21
6, 13, 20, 27
10, 20, 31, 41
124.46 135.72 128.7
■ Ordering Information
No. of
Terminal type
contacts
Straight Through-hole terminals
XC5B-2021
Straight wrap terminals
XC5B-2023
20*
32
XC5B-3221
XC5B-3223
44*
50*
64
XC5B-4421
XC5B-4423
XC5B-5021
XC5B-5023
XC5B-6421
XC5B-6423
100*
XC5B-0121
XC5B-0123
*Marked items have an increased number of contacts while following DIN standards.
DIN Twin-contact Connectors XC5
87
XC5E Double-row Plugs, DIN Q-type (Reverse)
■ Dimensions
XC5E-@@21
(With straight through-hole terminals)
Two, 2.8 dia.
Coding Key position
XC5E-@@23
(Straight DIP terminals)
(With straight wrap terminals)
(Straight wrap terminals)
Mounting holes (bottom view)
+0.1
0
+0.1
0
Two, 2.8 dia.
0.8
dia. (DIP terminals)
1.0
dia. (Wrap terminals)
No. of
Dimensions (mm)
Coding Key positions
(contact No.)
contacts
A
B
C
D
E
28.1
43.3
58.5
66.2
83.9
F
29.3
44.6
59.8
67.4
85.2
130.9
20
32
44
50
64
100
38.9
32.1
22.86
38.10
53.34
60.96
78.74
34.12
49.36
64.60
72.22
90.00
3, 8
54.2
69.4
77.0
94.8
140.5
47.4
62.6
70.2
88.0
133.7
5, 12
4, 9, 14, 19
5, 10, 16, 21
6, 13, 20, 27
10, 20, 31, 41
124.46 135.72 129.7
■ Ordering Information
No. of
Terminal type
contacts
Straight through-hole terminals
XC5E-2021
Straight wrap terminals
XC5E-2023
20*
32
XC5E-3221
XC5E-3223
44*
50*
64
XC5E-4421
XC5E-4423
XC5E-5021
XC5E-5023
XC5E-6421
XC5E-6423
100*
XC5E-0121
XC5E-0123
*Marked items have an increased number of contacts while following DIN standards.
88
DIN Twin-contact Connectors XC5
XC5F Double-row Sockets, DIN Q-type (Reverse)
■ Dimensions
XC5F-@@22
(With right-angle through-hole terminals)
Coding Key slot
Two, 2.8 dia.
Mounting holes (bottom view)
+0.1
0
0.8
dia.
Two, 2.8 dia.
No. of
contacts
Dimensions (mm)
Coding Key slot
positions (contact No.)
A
B
C
D
E
20
32
44
50
64
100
37.9
29.1
44.4
59.6
67.2
85.0
130.7
22.86
38.10
53.34
60.96
78.74
33.02
48.26
63.50
71.12
88.90
27.1
3, 8
53.2
68.4
76.0
93.8
139.5
42.3
57.5
65.2
82.9
5, 12
4, 9, 14, 19
5, 10, 16, 21
6, 13, 20, 27
10, 20, 31, 41
124.46 134.62 128.7
■ Ordering Information
No. of
contacts
Terminal type
Model
20*
Right-angle
through-hole
terminals
XC5F-2022
XC5F-3222
XC5F-4422
XC5F-5022
XC5F-6422
XC5F-0122
32
44*
50*
64
100*
*Marked items have an increased number of contacts while following DIN standards.
DIN Twin-contact Connectors XC5
89
XC5C Triple-row Plugs, DIN C-type (Standard)
■ Dimensions
XC5C-@@22
(With right-angle through-hole terminals)
Coding Key position
Two, 2.8 dia.
Mounting holes (bottom view)
+0.1
0
0.8
dia.
Two, 2.8 dia.
No. of
Dimensions (mm)
Coding Key positions
(contact No.)
contacts
A
B
C
D
E
43.3
43.3
83.9
83.9
F
44.6
44.6
85.2
85.2
32*
48
53.2
47.4
38.10
38.10
78.74
78.74
48.26
48.26
88.90
88.90
5, 12
53.2
93.8
93.8
47.4
88.0
88.0
5, 12
64*
96
6, 13, 20, 27
6, 13, 20, 27
*Has no center row (row b).
■ Ordering Information
No. of contacts
Terminal type
Model
32*
Right-angle
through-hole
terminals
XC5C-3222
XC5C-4822
XC5C-6422
XC5C-9622
48
64*
96
*Has no center row (row b).
90
DIN Twin-contact Connectors XC5
XC5D Triple-row Sockets, DIN C-type (Standard)
■ Dimensions
XC5D-@@21
(With straight through-hole terminals)
Two, 2.8 dia.
Coding Key slot
XC5D-@@23
(Straight DIP terminals)
(With straight wrap terminals)
(Straight wrap terminals)
Mounting holes (bottom view)
+0.1
0
+0.1
0
1.0
dia. (Wrap terminals)
0.8
dia. (DIP terminals)
Two, 2.8 dia.
No. of
contacts
Dimensions (mm)
Coding Key slot
positions (contact No.)
A
B
C
D
E
32*
48
54.2
44.4
44.4
85.0
85.0
38.10
38.10
78.74
78.74
49.36
49.36
90.00
90.00
42.3
5, 12
54.2
94.8
94.8
42.3
82.9
82.9
5, 12
64*
96
6, 13, 20, 27
6, 13, 20, 27
*Has no center row (row b).
■ Ordering Information
No. of contacts
Terminal type
Straight through-hole terminals
XC5D-3221
Straight wrap terminals
---
32*
48
XC5D-4821
XC5D-4823
XC5D-6423
XC5D-9623
64*
96
XC5D-6421
XC5D-9621
*Has no center row (row b).
DIN Twin-contact Connectors XC5
91
XC5G Triple-row Plugs, DIN R-type (Reverse)
■ Dimensions
XC5G-@@21
(With straight through-hole terminals)
Two, 2.8 dia.
Coding Key position
XC5D-@@23
(Straight DIP terminals)
(With straight wrap terminals)
(Straight wrap terminals)
Mounting holes (bottom view)
+0.1
0
+0.1
0
1.0
dia. (Wrap terminals)
0.8
dia. (DIP terminals)
Two, 2.8 dia.
No. of
Dimensions (mm)
Coding Key positions
(contact No.)
contacts
A
B
C
D
E
F
44.6
85.2
85.2
48
54.2
47.4
38.10
78.74
78.74
49.36
90.00
90.00
43.3
5, 12
64*
96
94.8
94.8
88.0
88.0
83.9
83.9
6, 13, 20, 27
6, 13, 20, 27
*Has no center row (row b).
■ Ordering Information
No. of contacts
Terminal type
Straight through-hole terminals
XC5G-4821
Straight wrap terminals
XC5G-4823
48
64*
96
XC5G-6421
XC5G-6423
XC5G-9621
XC5G-9623
*Has no center row (row b).
92
DIN Twin-contact Connectors XC5
XC5H Triple-row Sockets, DIN R-type (Reverse)
■ Dimensions
XC5H-@@22
(With right-angle through-hole terminals)
Coding Key slot
Two, 2.8 dia.
Mounting holes (bottom view)
+0.1
0
0.8
dia.
Two, 2.8 dia.
No. of
contacts
Dimensions (mm)
Coding Key slot
positions (contact No.)
A
B
C
D
E
48
53.2
93.8
93.8
44.4
85.0
85.0
38.10
78.74
78.74
48.26
88.90
88.90
42.3
5, 12
64*
96
82.9
82.9
6, 13, 20, 27
6, 13, 20, 27
*Has no center row (row b).
■ Ordering Information
No. of contacts
Terminal type
Model
48
Right-angle
through-hole
terminals
XC5H-4822
XC5H-6422
XC5H-9622
64*
96
*Has no center row (row b).
DIN Twin-contact Connectors XC5
93
Tools and Accessories (Sold Separately)
Cut the Coding Key on the Plug and insert
the Coding Key in the Coding Key slots on
the Socket to prevent improper insertion of
the Plug into the Socket.
Coding Cutter
XY2D-0001
1. Cut the Coding Key(s) in the slot in the
plug housing wall with the special cutting
tool (XY2D-0001).
Note: Coding Cutters may not work with
some DIN-style connector combina-
tions. In that case, contact your OM-
RON representative.
Coding Key
XC5Z-0001
2. Insert the special Coding Key
(XC5Z-0001) into the Coding Key slots
in the housing wall of the corresponding
Socket.
Note: 1. Each XC5Z-0001 has four Coding
Keys.
2. Coding Keys may not work with
some DIN-style connector combi-
nations. In that case, contact your
OMRON representative.
Material: PBT resin (UL94HB)/white
Temporary Fastening Pins
XC5Z-0002
Fastening pins (XC5Z-0002) are used to
keep the connector flush against the board
during automated soldering.
(For use with 1.6-mm boards)
Note: 1. For the XC5A, XC5F, XC5C, and
XC5H.
2. Temporary fastening pins cannot be
used with DIN-style connectors.
Dust Cover
XC5T-962
(For DIN41612 C- or R-type Triple-row Plugs with 64 or 96 contacts)
XC5T-963
(For DIN41612 C- or R-type Triple-row Sockets with 64 or 96 contacts)
Material: Polyamide resin (UL94V-2)/white
This cover is for protection against dust only, and should not be used
for flux protection during automated soldering.
94
DIN Twin-contact Connectors XC5
Mating Diagrams
Vertical (Standard)
Vertical (Reverse)
Stacking (See note.)
Horizontal (See note.)
B-type
Socket
XC5B
B-type
Plug
XC5A
Q-type
Socket
XC5F
(Center of
mounting holes)
Q-type Socket
XC5F
B-type Plug
XC5A
Q-type
Plug
XC5E
B-type
Socket
XC5B
Q-type
Plug
XC5E
C-type
Socket
XC5D
R-type
Socket
XC5H
(Center of
mounting holes)
C-type
Plug
XC5C
R-type Socket
XC5H
C-type Plug
XC5C
R-type
Plug
XC5G
C-type
Socket
XC5D
R-type
Plug
XC5G
Note: By combining a Standard and a Reverse Connector, stacking and horizontal connections can be made. In this case, the triangular marks
(terminal number 1) on the Plug and the Socket will not match.
DIN Twin-contact Connectors XC5
95
Precautions
■ Correct Use
Basic Mating Dimensions
Applicable Wrap Post Wire Sizes
Mating dimensions for all Connectors should be as shown in the fol-
lowing diagram.
AWG30, AWG28, AWG26, or AWG24
(Solid wire: 0.25 to 0.51 mm dia.)
Wrap Post Length
Daughter board
3 wires
Soldering
Automated Soldering
Use masking tape to mask Right-angle Connectors before auto-
mated soldering.
Mother board
α: 3.55 mm
Masking tape
The distance between the center line of the mounting holes on the
mother board and the daughter board. (This center line is shifted
0.3 mm toward row a from row b.)
(Recommended tape: 3M Sumitomo #214)
Automated Soldering Conditions (Jet Flow)
β: 2.54 mm
1. Soldering temperature: 250±5°C
2. Continuous soldering time: Within 5 s
The distance between the mounting holes on the daughter board and row a.
γ: 5.3 mm
The distance between the edge of the daughter board and row a.
δ: 12.4 to 14.2 mm
To ensure reliability, be sure to keep the Connectors within these
dimensions when mounting.
The allowable margins for mating the Connectors are shown below.
Plug
1 mm max.
1 mm max.
Socket
96
DIN Twin-contact Connectors XC5
MEMO
DIN Twin-contact Connectors XC5
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
11/10
Specifications subject to change without notice
Printed in USA
Cat. No. X304-E-1
DIN Twin-contact Connectors XC5
相关型号：
©2020 ICPDF网 联系我们和版权申明