D4B-1615N [OMRON]
Snap-action contact with certified direct opening operation certification; 与认证直接打开操作认证速动触点型号: | D4B-1615N |
厂家: | OMRON ELECTRONICS LLC |
描述: | Snap-action contact with certified direct opening operation certification |
文件: | 总16页 (文件大小:2857K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Safety Limit Switch
D4B-@N
CSM_D4B-_N_DS_E_5_1
Snap-action contact with certified direct
Note: Contact your sales representative for details on models
with safety standard certification.
opening operation certification
.
Maintenance, seal, and resistance to
shock increased and direct opening
mechanism added.
Three-conduit switches and 2NC
switches are also available.
• Direct opening mechanism (NC contacts only) added to
enable opening contacts when faults occur, such as fused
contacts.
• Safety of lever settings ensured using a mechanism that
engages a gear between the operating position indicator plate
and the lever.
• Equipped with a mechanism that indicates the applicable
operating zone, as well as push-button switching to control left
and right motion.
• Head seal structure strengthened to improve seal properties
(TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13).
• Wide standard operating temperature range:
–40 to 80°C (standard type).
• Models with gold-plated contacts added to the series to
enable handling microloads.
• Certified standards: UL, CSA, EN (TÜV), and CCC.
Be sure to read the “Safety Precautions” on page 14
and the “Precautions for All Safety Limit Switches” .
Model Number Structure
Model Number Legend
D4B-@@@@N
1
2
3
1. Conduit size
3. Actuator
1: PG13.5 (1-conduit)
00: Switch box (without head)
11: Roller lever (resin roller)
15: Roller lever (stainless steel roller)
1R:Roller lever
2: G1/2 (PF1/2) (1-conduit)
3: 1/2-14NPT (1-conduit)
4: M20 (1 conduit)
5: PG13.5 (3-conduit)
6: G1/2 (PF1/2) (3-conduit)
7: 1/2-14NPT (3-conduit)
(conventional D4B-compatible)
16: Adjustable roller lever
17: Adjustable rod lever
70: Top plunger
8: M20 (3-conduit)
2. Built-in Switch
1: 1NC/1NO (snap-action)
71: Top roller plunger
81: Coil spring
3: 1NC/1NO (snap-action) gold-plated contacts
5: 1NC/1NO (slow-action) *
6: 1NC/1NO (slow-action) gold-plated contacts *
A: 2NC (slow-action)
87: Plastic rod
B: 2NC (slow-action) gold-plated contacts
* Excluding D4B-@@81N and D4B-@@87N models.
1
D4B-@N
Ordering Information
Set Model Numbers
Consult with your OMRON representative when ordering any models that are not listed in this table.
Safety Limit Switches (with Direct Opening Mechanism)
1NC/1NO (Snap-action)
1NC/1NO (Slow-action)
2NC (Slow-action)
Actuator
Conduit openings
Direct
Model
Direct
opening
Direct
opening
Model
Model
opening
Pg13.5
D4B-1111N
D4B-1511N
D4B-2511N
D4B-3511N
D4B-4511N
D4B-5511N
D4B-6511N
D4B-7511N
D4B-8511N
D4B-1515N
D4B-2515N
D4B-3515N
D4B-4515N
D4B-5515N
D4B-1570N
D4B-2570N
D4B-3570N
D4B-4570N
D4B-5570N
D4B-6570N
D4B-7570N
D4B-8570N
D4B-1571N
D4B-2571N
D4B-3571N
D4B-4571N
D4B-5571N
D4B-6571N
D4B-7571N
D4B-8571N
D4B-1A11N
D4B-2A11N
D4B-3A11N
D4B-4A11N
D4B-5A11N
D4B-6A11N
D4B-7A11N
D4B-8A11N
D4B-1A15N
D4B-2A15N
D4B-3A15N
D4B-4A15N
D4B-5A15N
D4B-1A70N
D4B-2A70N
D4B-3A70N
D4B-4A70N
D4B-5A70N
D4B-6A70N
D4B-7A70N
D4B-8A70N
D4B-1A71N
D4B-2A71N
D4B-3A71N
D4B-4A71N
D4B-5A71N
D4B-6A71N
D4B-7A71N
D4B-8A71N
G1/2 (PF1/2)
1/2-14NPT
D4B-2111N
D4B-3111N
D4B-4111N
D4B-5111N
D4B-6111N
D4B-7111N
D4B-8111N
D4B-1115N
D4B-2115N
D4B-3115N
D4B-4115N
D4B-5115N
D4B-1170N
D4B-2170N
D4B-3170N
D4B-4170N
D4B-5170N
D4B-6170N
D4B-7170N
D4B-8170N
D4B-1171N
D4B-2171N
D4B-3171N
D4B-4171N
D4B-5171N
D4B-6171N
D4B-7171N
D4B-8171N
M20
Roller lever
(resin roller)
Pg13.5 (3-conduit)
G1/2 (3-conduit)
1/2-14NPT (3-conduit)
M20 (3-conduit)
Pg13.5
G1/2 (PF1/2)
1/2-14NPT
Roller lever
(stainless steel
roller)
M20
Pg13.5 (3-conduit)
Pg13.5
G1/2 (PF1/2)
1/2-14NPT
M20
Top plunger
Pg13.5 (3-conduit)
G1/2 (3-conduit)
1/2-14NPT (3-conduit)
M20 (3-conduit)
Pg13.5
G1/2 (PF1/2)
1/2-14NPT
M20
Top roller plunger
Pg13.5 (3-conduit)
G1/2 (3-conduit)
1/2-14NPT (3-conduit)
M20 (3-conduit)
2
D4B-@N
General-purpose Limit Switches
1NC/1NO (Snap-action)
1NC/1NO (Slow-action)
2NC (Slow-action)
Actuator
Conduit openings
Direct
Model
Direct
Model
Direct
opening
Model
opening
opening
Pg13.5
D4B-1116N
D4B-1516N
D4B-1A16N
D4B-2A16N
D4B-3A16N
D4B-5A16N
D4B-6A16N
D4B-7A16N
D4B-1A17N
D4B-2A17N
D4B-3A17N
D4B-5A17N
D4B-6A17N
D4B-7A17N
D4B-1A81N
D4B-2A81N
D4B-3A81N
D4B-5A81N
D4B-6A81N
D4B-7A81N
D4B-1A87N
D4B-2A87N
D4B-3A87N
D4B-5A87N
D4B-6A87N
D4B-7A87N
G1/2 (PF1/2)
D4B-2116N
D4B-3116N
D4B-5116N
D4B-6116N
D4B-7116N
D4B-1117N
D4B-2117N
D4B-3117N
D4B-5117N
D4B-6117N
D4B-7117N
D4B-1181N
D4B-2181N
D4B-3181N
D4B-5181N
D4B-6181N
D4B-7181N
D4B-1187N
D4B-2187N
D4B-3187N
D4B-5187N
D4B-6187N
D4B-7187N
D4B-2516N
D4B-3516N
D4B-5516N
D4B-6516N
D4B-7516N
D4B-1517N
D4B-2517N
D4B-3517N
D4B-5517N
D4B-6517N
D4B-7517N
1/2-14NPT
Adjustable roller
lever
---
---
---
---
---
---
---
Pg13.5 (3-conduit)
G1/2 (3-conduit)
1/2-14NPT (3-conduit)
Pg13.5
G1/2 (PF1/2)
1/2-14NPT
Adjustable rod
lever
---
---
---
Pg13.5 (3-conduit)
G1/2 (3-conduit)
1/2-14NPT (3-conduit)
Pg13.5
G1/2 (PF1/2)
1/2-14NPT
Coil spring
(non-directional)
Pg13.5 (3-conduit)
G1/2 (3-conduit)
1/2-14NPT (3-conduit)
Pg13.5
---
G1/2 (PF1/2)
1/2-14NPT
Plastic rod
(non-directional)
Pg13.5 (3-conduit)
G1/2 (3-conduit)
1/2-14NPT (3-conduit)
Note: 1. In addition to the above models, models compatible with the previous D4B Switches (with standard rotary levers) are available.
Model number examples: D4B-1@1RN(Pg13.5) or D4B-2@1RN(PF1/2)
2. Consult your OMRON representative for products.
3
D4B-@N
Replacement Parts
Switch Boxes
Conduit
1-conduit type
G1/2
3-conduit type
G1/2
Built-in switch
PG13.5
1/2-14NPT
D4B-3100N
PG13.5
1/2-14NPT
D4B-7100N
1NC/1NO
(Snap-action)
D4B-1100N
D4B-2100N
D4B-2500N
D4B-2A00N
D4B-5100N
D4B-6100N
D4B-6500N
D4B-6A00N
1NC/1NO
D4B-1500N
D4B-1A00N
D4B-3500N
D4B-3A00N
D4B-5500N
D4B-5A00N
D4B-7500N
D4B-7A00N
(Slow-action)
2NC
(Slow-action)
Operating Heads
Actuator
Type
Standard
Plain
Model
D4B-0010N
D4B-0070N
Side rotary *
Top plunger
Top roller plunger D4B-0071N
Coil spring
Plastic rod
D4B-0081N
D4B-0087N
Flexible-rod
* The Lever is not included with the Side Rotary Operating Head.
Levers
Actuator
Length (mm)
Diameter of roller
Model
Standard
31.5
17.5 dia.
17.5 dia.
19 dia.
---
D4B-0001N
D4B-0005N
D4B-0006N
D4B-0007N
D4B-000RN
Stainless steel roller lever
Adjustable roller lever
31.5
25 to 89
145 max.
33.7
Adjustable rod lever
Interchangeable with D4B-0001
19 dia.
Note: Other types of lever are also available.
4
D4B-@N
Specifications
Standards and EC Directives
Conforms to the following EC Directives:
• Machinery Directive
• Low Voltage Directive
• EN1088
• EN50041
Certified Standards
Snap-action Models
Slow-action Models
Certification body
Certification body
Standard
File No.
Standard
File No.
EN60947-5-1
EN60947-5-1
(certified direct
opening mechanism)
GS-ET-15
(certified direct
opening mechanism)
GS-ET-15
J9851083
J9851083
TÜV Rheinland
TÜV Rheinland
EN60947-5-1
(uncertified direct
opening mechanism)
EN60947-5-1
(uncertified direct
opening mechanism)
J50005477 *
J50005477 *
UL
UL508
E76675
UL
UL508
E76675
CSA
C22.2 No. 14
GB14048.5
LR45746
CSA
C22.2 No. 14
GB14048.5
LR45746
CQC (CCC)
2003010305077612
CQC (CCC)
2003010305077612
* Adjustable roller lever, adjustable rod lever, coil spring, and plastic
rod models only.
* Adjustable roller lever, adjustable rod lever, coil spring, and plastic
rod models only.
Certified Standard Ratings
TÜV (EN60947-5-1), CCC (GB14048.5)
Item
Utilization category AC-15
Rated operating current (Ie)
Rated operating voltage (Ue)
2 A
400 V
Note: As protection against short-circuiting, use either a gI-type or gG-type 10 A fuse that conforms to IEC60269.
UL/CSA: (UL508, CSA C22.2 No. 14)
A600
Current (A)
Volt-amperes (VA)
Make Break
Rated voltage
120 VAC
240 VAC
480 VAC
600 VAC
Carry current
Make
Break
60
30
15
12
6
3
1.5
1.2
10 A
7,200
720
5
D4B-@N
Ratings
Non-inductive load (A)
Inductive load (A)
Inductive load Motor load
NC NO NO
Rated voltage (V)
Resistive load
NC NO
Lamp load
NC
NO
NC
125 VAC
250
400
10
10
10
3
2
1.5
1.5
1
0.8
10
10
3
5
3
1.5
2.5
1.5
0.8
8 VDC
14
30
10
10
6
6
6
4
3
3
3
10
10
6
6
6
4
125
250
0.8
0.4
0.2
0.1
0.2
0.1
0.8
0.4
0.2
0.1
Note: 1. The above values are continuous currents.
2. Inductive loads have a power factor of 0.4 or higher (AC) or a time constant of 7 ms or lower (DC).
3. Lamp loads have a inrush current of 10 times the normal current.
4. Motor loads have a inrush current of 6 times the normal current.
Inrush current
30 A max.
Characteristics
Degree of protection *1
IP67 (EN60947-5-1)
30,000,000 operations min. (snap-action)
10,000,000 operations min. (slow-action)
Mechanical
Electrical
Durability *2
500,000 operations min. (10 A resistive load at 250 VAC)
1 mm/s to 0.5 m/s
Operating speed
Mechanical
Electrical
120 operations/minute
Operating frequency
Contact resistance
30 operations/minute
25 mΩ max.
General load
Gold-clad contact 20 mA resistive load at 5 VAC
(N-level reference value)
180 mA resistive load at 5 VAC
Minimum applicable load *4
Rated insulation voltage (Ui)
Rated frequency
600 V (EN60947-5-1)
50/60 Hz
Protection against electric shock
Class I (with ground terminal)
3 (EN60947-5-1)
Pollution degree (operating environment)
Between terminals
of same polarity
2.5 kV (snap-action)/4 kV (slow-action)
Impulse withstand voltage Between terminals
4 kV (slow-action)
4 kV
(EN60947-5-1)
of different polarity
Between each
terminal and ground
100 MΩ min. (at 500 VDC) between terminals of the same polarity and between each
terminal and non-current-carrying part
Insulation resistance
2 × 2 mm min. (slow-action)
2 × 0.5 mm min. (snap-action)
Contact gap
Vibration resistance
Malfunction
Destruction
Malfunction
10 to 55 Hz, 0.75 mm single amplitude
1,000 m/s2 min.
300 m/s2 min.
Shock resistance
Conditional short-circuit current
Conventional enclosed thermal current (Ithe)
Ambient operating temperature
Ambient operating humidity
Weight
100 A (EN60947-5-1)
20 A (EN60947-5-1)
–40 to 80°C (with no icing) *3
95% max.
Approx. 250 g
Note: 1. The above values are initial values.
2. The above values may vary depending on the model. Consult your OMRON sales representative for details.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are sufficient for
the operating conditions and environment beforehand.
*2. The durability is for an ambient temperature of 5 to 35°C and ambient humidity of 40% to 70%. For further conditions, consult your OMRON
sales representative.
*3. –20 to 80°C for the flexible-rod type.
*4. The above values may vary depending on switching frequency, environmental condition, and relativity level, consult your OMRON sales
representative.
6
D4B-@N
Engineering Data
(Ambient temperature: 5 to 30°C, ambient humidity: 40 to 70%)
Electrical Durability (Snap-action)
(cosφ = 1)
1,000
(cosφ = 0.4)
1,000
Operating frequencies:
30 times/min., cosφ = 0.4
Operating frequencies:
30 times/min., cosφ = 1
500
300
500
300
125 VAC
250 VAC
480 VAC
250 VAC
100
50
100
50
30
10
30
10
500 VAC
Switching current (A)
Switching current (A)
Structure and Nomenclature
Structure
Head
Can be connected in any of four directions (except for
Roller Plunger Models, which can be connected at either
of 2 directions that differ by 90°)
The roller lever switch employs a
system which allows
Roller
selection of operation on only one
side (left or right)
Nylon rollers used for superior resistance to wear.
or both sides without the use of
any tools.
Lever (Form Lock Structure)
The lever has an operating position indication plate
and grooves that mate every 90° to prevent slipping
between the rotary axis and lever.
Seal Ring
Sealing properties improved by using a X ring and
bearing-free structure.
The operating position indicator plate
Built-in Switch
Direct opening mechanism used for NC contact to
separate contact for faults, such as contact welding.
The heights of the NC and NO terminals are different
to enable easier wiring.
Conduit Opening
Models are available with a wide range of conduits.
Size
Box
1-conduit model 2-conduit model
Yes
Yes
Yes
Pg13.5
G1/2
Yes
Yes
Yes
Cover
1/2-14NPT
Ground Screw
Ground screws are provided on all
models for increased safety.
Note: NBR is used for rubber parts.
7
D4B-@N
Direct Opening Mechanism
1NO/1NC Contact (Snap-action)
Conforms to EN60947-5-1 Direct Opening
(Only NC contact has a direct opening mechanism.)
1. When contact welding occurs.
2. When contacts are being pulled apart.
3. When contacts are completely
pulled apart.
Movable contact
Safety cam directly
pushes up the
movable contact
blade.
Movable contact
blade
Plunger
A
B
Safety cam
Fixed contact (NC)
1NC/1NO Contact (Slow-action)
2NC Contact (Slow-action)
Conforms to EN60947-5-1 Direct Opening
Conforms to EN60947-5-1 Direct Opening
(Both NC contacts have a direct opening mechanism.)
When contact welding occurs, the contacts are separated
from each other by the plunger being pushed in.
(Only NC contact has a direct opening mechanism.)
When contact welding occurs, the contacts are separated
from each other by the plunger being pushed in.
Fixed contact (NC)
Fixed contact (NC)
Movable contact
Plunger
Contact spring
Contact spring
Return spring
Movable contact
Plunger
Return spring
Fixed contact (NO)
Contact Form
Model
Contact
Contact form
Diagrams
Explanation
Only NC contact 11-12 has a
certified direct opening
mechanism.
Za
11-12
13-14
13
14
12
ON
1NC/1NO
(Snap-action)
D4B-@1@N
Terminal numbers 11-12 and
13-14 cannot be used as unlike
poles.
Stroke
11
Only NC contact 11-12 has a
certified direct opening
mechanism.
Zb
11-12
23-24
11
23
12
24
1NC/1NO
(Slow-action)
ON
D4B-@5@N
D4B-@A@N
Terminal numbers 11-12 or
23-24 can be used as unlike
poles.
Stroke
Both NC contacts 11-12 and
21-22 have a certified direct
opening mechanism.
Zb
11-12
21-22
11
21
12
22
2NC
(Slow-action)
ON
Terminal numbers 11-12 and
21-22 can be used as unlike
poles.
Stroke
Note: Terminal numbers are according to EN50013; contact symbols are according to IEC60947-5-1.
8
D4B-@N
Dimensions and Operating Characteristics
(Unit: mm)
Note: Omitted dimensions are the same as those for the Roller Lever
Type Models
opening.
D4B-3@@@N and D4B-7@@@N have a 1/2-14NPT conduit
opening.
D4B-1@@@N and D4B-5@@@N have a PG13.5 conduit
opening. D4B-2@@@N and D4B-6@@@N have a G1/2 conduit
1-conduit Models
Switches
Roller Lever
D4B-@@11N
Roller Lever (Stainless Steel Roller)
D4B-@@15N
62
1
62
1
17.5 dia. × 6.6 resin roller
17.5 × 7 stainless steel roller
56
56
16
16
M5 × 12
Allen-head bolt
M5 × 12
Allen-head bolt
28.3
28.3
Four, M3.5 × 19.5
head
mounting screws
Four, M3.5 × 19.5
head
mounting screws
31.5R
31.5R
Set position
indicator plate
*1
Set position
indicator plate *1
22.5
22.5
23
23
11.5
11.5
131.3 1.2
131.3 1.2
Two, 5.3 dia.
mounting holes
Two, 5.3-dia.
mounting holes
99.5
99.5
Two, M4 × 12
60 0.2
Two, M4 × 12
cover mounting
screws
77
74
77
74
60 0.2
8
cover mounting
Cover
screws
Cover
7.3
7.3
8
5.3
15
31.5
43
5.3
15
Conduit opening
Conduit opening
30 0.2
30 0.2
31.5
43
40+1
40+1
0
0
Adjustable Rod Lever *2
Adjustable Roller Lever *2
D4B-@@16N
71
64.4
53
46.8
1
66
1
D4B-@@17N
5.4
56.8
28.3
16
3 dia. × 160
stainless steel
rod
19 dia. × 7
resin roller
16
28.3
Four, M3.5 × 24.5
head
mounting screws
Four, M3.5 × 24.5
head
mounting screws
145 max.
Setting position
indicator *1
Set position
indicator plate *1
25 to 89R
23
1
2
3
M5 × 12
Allen-head bolts
22.5
22.5
M5 × 16
Allen-head bolts
23
Two, 5.3-dia.
mounting holes
Two, 5.3-dia.
99.5
99.5
mounting holes
60 0.2
77
74
77
74
60 0.2
8
Two, M4 × 12 cover
Two, M4 × 12 cover
mounting screws
mounting screws
Cover
Cover
7.3
7.3
8
5.3
15
31.5
43
5.3
15
Conduit opening
Conduit opening
30 0.2
30 0.2
31.5
43
40+1
40+1
0
0
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
*1. The lever can be set to any desired position by turning the operating position indicator.
*2. In terms of construction, the Switch is a General-purpose Limit Switch rather than a Safety Limit Switch.
Model D4B-@@11N D4B-@@15N D4B-@@16N D4B-@@17N
Operating characteristics
*1
*2
Operating force
Release force
Pretravel
OF max.
RF min.
PT
PT (2nd) *3 *5
OT min.
9.41N
1.47N
21° 3°
(45°)
50°
12°
35°
55°
19.61N
(75°)
9.41N
1.47N
21° 3°
(45°)
50°
12°
35°
55°
19.61N
(75°)
9.41N
1.47N
21° 3°
(45°)
50°
12°
35°
55°
19.61N
(75°)
2.12N
0.29N
21° 3°
(45°)
50°
12°
35°
55°
19.61N
(75°)
Overtravel
Movement differential MD max. *4
Direct opening travel
DOT min. *3 *6
*4 *6
DOF min. *6
TT *5
Direct opening force
Total travel
Note: Variation occurs in the simultaneity of contact opening/closing
operations of 2NC contacts. Check contact operation.
*1. The operating characteristics of these Switches were measured
with the roller level set at 31.5 mm.
*2. The operating characteristics of these Switches were measured
with the rod level set at 140 mm.
*3. Only for slow-action models.
*4. Only for snap-action models.
*5. Reference values.
*6. Must be provided to ensure safe operation.
9
D4B-@N
Top Plunger
Top Roller Plunger
D4B-@@70N
D4B-@@71N
12.7 dia. × 4.8
stainless steel roller
PT
16
Four, M3.5 × 19.5
head
mounting screws
16
Four, M3.5 × 19.5
head
mounting screws
9.2 dia.
PT
9.2 dia.
Stainless steel
plunger
OP
20
OP
20
Two, 5.3-dia.
Two, 5.3-dia.
mounting holes
mounting holes
97
97
77
74
60 0.2
Two, M4 × 12 cover
mounting screws
60 0.2
8
Two, M4 × 12 cover
mounting screws
77
74
Cover
Cover
7.3
7.3
8
5.3
15
31.5
43
Conduit opening
5.3
15
31.5
43
Conduit opening
30 0.2
30 0.2
40+1
40+1
0
0
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
Operating characteristics
Model
D4B-@@70N
18.63 N
1.96 N
2 mm
D4B-@@71N
18.63 N
1.96 N
2 mm
Operating force
Release force
Pretravel
OF max.
RF min.
PT max.
Note: Variation occurs in the simultaneity of
contact opening/closing operations of
2NC contacts. Check contact
operation.
*1. Only for slow-action models.
*2. Only for snap-action models.
*3. Reference values.
PT (2nd) *1 *3
(3 mm)
5 mm
1 mm
3.2 mm
49.03 N
(7 mm)
(3 mm)
5 mm
1 mm
3.2 mm
49.03N
(7 mm)
Overtravel
OT min.
Movement differential MD max. *2
Direct opening travel
Direct opening force
Total travel
DOT min. *4
DOF min. *4
TT *3
*4. Must be provided to ensure safe
operation.
Free position
Operating position
FP max.
OP
38 mm
35 1 mm
51 mm
48 1 mm
Coil Spring (Non-directional) *2
D4B-@@81N
Plastic Rod (Non-directional) *2
D4B-@@87N
Plastic rod
Stainless steel coil spring
The Switch can be
The Switch can be
actuated in any
direction except to
the axis center.
actuated in any
direction except to
the axis center.
(40) *1
(40) *1
6.6 dia.
6.6 dia.
15.7 16
15.7 16
18.2 dia.
29.1
18.2 dia.
Seal cap
Seal cap
2.7
77
2.7
77
Four, M3.5 × 7
head mounting
screws
203.5 1.2
203.5 1.2
29.1
Four, M3.5 × 7
mounting screws
Two, 5.3-dia.
mounting holes
Two, 5.3-dia.
mounting holes
60 0.2
8
Two, M4 × 12 cover
mounting screws
60 0.2
74
74
Two, M4 × 12 cover
mounting screws
Cover
7.3
7.3
8
Cover
5.3
15
5.3
30 0.2
15
Conduit
Conduit
opening
opening
30 0.2
31.5
43
31.5
43
40+1
40+1
0
0
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
*1. Be sure to adjust the dog to within 40 mm from the top end of the coil spring.
*2. In terms of construction, the Switch is a General-purpose Limit Switch rather than a Safety Limit Switch.
Operating characteristics
Model
D4B-@@81N
D4B-@@87N
Note: Variation occurs in the simultaneity of
contact opening/closing operations of
2NC contacts. Check contact
operation.
Operating force
Pretravel
OF max.
PT max.
1.47 N
15°
1.47 N
15°
10
D4B-@N
3-conduit Switches
Roller Lever
Roller Lever
D4B-@@11N
D4B-@@15N
62
56
1
17.5 dia. × 7
stainless steel
roller
1
17.5 dia. x 6.6 resin roller
M5 × 12
Allen-head
bolt
M5 x 12
Allen-head bolt
31.5R
Four, M3.5 x 24.5
head
mounting screws
28.3
1
16
Four, M3.5 × 24.5
head
mounting screws
31.5R
Operating position
indicator *1
Operating position
indicator *1
22.5
40 to 42
40 to 42
23
5.3
11.5
129.7 1.2
Six, 5.3-dia.
mounting holes
Six, 5.3 dia.
mounting holes
30 0.2
97.9
Four, M3.5 x 10
cover mounting screws
Four, M3.5 × 10 cover
mounting screws
18
50.9
75.4
59.3 0.2
71.4
66.4
Two, caps
Two, caps
Cover
Cover
17.2
Two, 5+0.15 -dia.
Two, 5+0.15 -dia.
0
27 0.2
51
28.5
0
3-conduit opening
3-conduit opening
35.7
38.8
holes (depth: 6)
holes (depth: 6)
57
63
Adjustable Roller Lever *2
D4B-@@16N
Adjustable Rod Lever *2
D4B-@@17N
19 dia. x 7 resin roller
3 dia. x 160
stainless steel rod
Four, M3.5 x 24.5
head
mounting screws
Four, M3.5 x 24.5
head
mounting screws
Operating
position
indicator *1
145 max.
Operating position
25 to 89R
indicator *1
40 to 42
M5 x 12
Allen-head
bolts
M5 x 16
Allen-head
bolts
40 to 42
Six, 5.3-dia.
Mounting holes
Four, M3.5 x 10 Cover
mounting screws
Six, 5.3-dia.
mounting holes
Four, M3.5 x 10 cover
mounting screws
Two, caps
66.4
Two, caps
Cover
Cover
Two, 5+0.15 -dia.
Two, 5 +0.15 -dia.
0
holes (d0epth: 6)
3-conduit opening
3-conduit opening
holes (depth: 6)
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
*1. The lever can be set to any desired position by turning the operating position indicator.
*2. In terms of construction, the Switch is a General-purpose Limit Switch rather than a Safety Limit Switch.
D4B-@@11N D4B-@@15N D4B-@@16N D4B-@@17N
Model
Operating characteristics
*1
*2
Operating force
Release force
Pretravel
OF max.
RF min.
PT
PT (2nd) *3 *5
OT min.
9.41 N
1.47 N
21° 3°
(45°)
50°
12°
35°
55°
19.61 N
(75°)
9.41 N
1.47 N
21° 3°
(45°)
50°
12°
35°
55°
19.61 N
(75°)
9.41 N
1.47 N
21° 3°
(45°)
50°
12°
35°
55°
19.61 N
(75°)
2.12 N
0.29 N
21° 3°
(45°)
50°
12°
35°
55°
19.61 N
(75°)
Overtravel
Movement differential MD max. *4
Direct opening travel
DOT min. *3 *6
*4 *6
DOF min. *6
TT *5
Direct opening force
Total travel
Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC contacts. Check contact operation.
*1. The operating characteristics of these Switches were measured with the roller level set at 31.5 mm.
*2. The operating characteristics of these Switches were measured with the rod level set at 140 mm.
*3. Only for slow-action models.
*4. Only for snap-action models.
*5. Reference values.
*6. Must be provided to ensure safe operation.
11
D4B-@N
Top Plunger
D4B-@@70N
Top Roller Plunger
D4B-@@71N
Four, M305 x 1905
head
mounting screws
Four, M305 x 1905
head
mounting screws
1207 dia0 x .08
stainless steel roller
902 dia0
902 dia0
Stainless steel
plunger
.± to .2
.± to
.2
Six, 503-dia0
Six, 503-dia0
mounting screws
mounting holes
950.
Four, M305 x 1±
cover mounting screws
Four, M305 x 1± cover
mounting screws
Two, caps
Cover
Two, caps
Cover
Two, 5 +±015 -dia0
Two, 5 +±015 -dia0
holes (d±epth: 6)
holes (d±epth: 6)
3-conduit opening
3-conduit opening
Note: Unless otherwise specified, a tolerance of ±±0. mm applies to all dimensions0
Operating characteristics Model D4B-@@70N D4B-@@71N
18063 N 18063 N
Operating force
Release force
Pretravel
OF max.
Note: Variation occurs in the simultaneity of
contact opening/closing operations of
2NC contacts0 Check contact
operation0
*1. Only for slow-action models0
*2. Only for snap-action models0
*3. Reference values0
RF min.
PT max.
1096 N
2 mm
1096 N
2 mm
PT (2nd) *1 *3
(3 mm)
5 mm
1 mm
302 mm
.90±3 N
(7 mm)
(3 mm)
5 mm
1 mm
302 mm
.90±3N
(7 mm)
Overtravel
OT min.
Movement differential MD max. *2
Direct opening travel DOT min. *4
Direct opening force
Total travel
DOF min. *4
TT *3
*4. Must be provided to ensure safe
operation0
Free position
Operating position
FP max.
OP
38 mm
35±1 mm
51 mm
.8±1 mm
Coil Spring *2
D4B-@@81N
Plastic Rod *2
D4B-@@87N
Plastic rod
The Switch can be actuated
to all directions except to the
Stainless steel coil spring
axis center0
(.±) *1
The Switch can be actuated
to all directions except to
the axis center
(.±) *1
606 dia0
606 dia0
1802 dia0
Seal cap
1802 dia0
Four, M305 x 7
.± to .2
2±109±102
Seal cap
head mounting screws
Four, M305 x 7
.± to .2
head mounting screws
Six, 503-dia0
mounting holes
Four, M305 x 1±
cover mounting screws
Two, caps
Six, 503-dia0
mounting holes
Four, M305 x 1± cover
mounting screws
Cover
Two, caps
Cover
Two, 5+±015 -dia0
±
3-conduit opening
Two, 5+±015 -dia0
holes (depth: 6)
±
3-conduit
opening
holes (depth: 6)
Note: Unless otherwise specified, a tolerance of ±±0. mm applies to all dimensions0
*1. Be sure to adjust the dog to within .± mm from the top end of the coil spring0
*2. In terms of construction, the Switch is a General-purpose Limit Switch rather than a Safety Limit Switch0
Operating characteristics
Model
D4B-@@81N
10.7 N
15°
D4B-@@87N
10.7 N
15°
Operating force
Pretravel
OF max.
PT max.
Note: Variation occurs in the simultaneity of
contact opening/closing operations of
2NC contacts0 Check contact
operation0
12
D4B-@N
Levers (Applicable for Roller Lever Models only)
Roller Lever
D4B-0001N
Roller Lever
Adjustable Roller Lever
D4B-0006N
Adjustable Rod Lever
(Stainless Steel Roller)
26
D4B-0007N
3 dia.
21.6
12.5
D4B-0005N
17.5 dia. × 7
stainless steel roller
20.2
19 dia. x 7 nylon roller
17
12
17
Stainless rod
12.8
6.4
adjusting
11.8
17.5 dia. x 6.8 nylon roller
scale
Adjustable
145
max.
range
(25 to 89)
M5 hexagon
socket head
screw
5.4
160
31.5
31.5R
97
M5 hexagon
socket head
screw
M5 hexagon
socket head
screw (length: 12)
28
7.3 dia.
15
M5 hexagon
socket head
screw
15
11.5
11.5
3.2
11
15.9
20
17
Roller Lever
WL-1A118
Roller Lever
WL-1A106
Roller Lever (Compatible with
Previous D4B Model)
D4B-000RN
40.2 0.8
17.8
17.5 dia. × 30
nylon roller
19 dia. x 7 nylon roller
12
23.6
20.1 0.8
50 dia. × 6 nylon roller
7.3+0.1 dia.
0
33.7
38
54.8
7.3 dia.
M5 hexagon
socket head screw
7.3 dia.
M5 hexagon
socket head
screw
12
18
11.5
M5 hexagon socket
head screw (length: 12)
16
11.4
Note: Reverse the indicator plate when mounting.
Note: Reverse the indicator plate when mounting.
Roller Lever
WL-1A300
Roller Lever
WL-1A400
17.9
17.5 dia. × 7
stainless
12.6
steel roller
16.9
17 dia. × 6 bearing roller
12.1
63 0.3
79.8
7.3+0.1 dia.
---
0
54.3
38
7.3 dia.
M5 hexagon
socket head
screw
M5 hexagon
socket head
screw (length: 12)
11.5
16
16
11.4
Note: Reverse the indicator plate when mounting.
Note: Reverse the indicator plate when mounting.
Spring Rod Lever
WL-4A201
Adjustable Rod Lever
WL-3A100
Resin Loop Lever
D4A-F00
150 10
400 2
7.3 dia.
9
Adjustable range (350 to 380)
7.3 dia.
2 dia. stainless
steel spring
12.8
(23.6)
60 10
8.0 0.4
13 dia.
6
11
7.5
65 2
Adjustable
range
(290 max.)
6
11
7.5
3.2 dia. stainless steel
operation rod
M5 × 16 hexagon
socket head screw
M5 hexagon socket head screws
4 dia.
25 max.
13.8
25.5
max.
13.4
Nylon
5.5
33
5.5
M5 hexagon socket head screw
M5 hexagon socket head screw
Note: Reverse the indicator plate
when mounting.
Note: Reverse the indicator plate when mounting.
Note: Reverse the indicator plate when mounting.
Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies
to all dimensions.
2. Safety Limit Switch specifications are satisfied with D4B-@@@@N Levers only (example: D4B-0001N).
The D4B-0006N Adjustable Roller Lever and D4B-0007N Adjustable Rod Lever, however, cannot be used. Do not order them for a Side
Rotary Operating Head.
13
D4B-@N
Application Precaution
Operating section
(on back of Head)
Changing the Operating Direction
Switches with Roller Levers
Operating procedure
The operating direction of the lever can be easily
changed without using any tools. It can be set to
clockwise operation (CW) or counterclockwise
(CCW) operation.
Use the procedure given at the right to change
the operating direction.
1. Remove the four Head set screws and remove the Head
from the Switch Box.
Operating
position
mark
Head Cover
2. Turn the bottom of the Head toward you, press in the Head
Cover shown in the diagram at the left, and turn the Cover
clockwise or counterclockwise.
(arrow)
Note: The factory setting is for “CW.CCW.”
3. The “CW” setting is for clockwise operation and the “CCW”
setting is for counterclockwise operation. Set the Cover to
the desired position.
Safety Precautions
Refer to the “Precautions for All Switches” and “Precautions for All Safety Limit Switches”.
Mounting
Precautions for Safe Use
Use four M5 screws with washers to mount the standard model. Be
• Do not use the Switch submerged in oil or water, or in locations
continuously subject to splashes of oil or water. Doing so may
result in oil or water entering the Switch interior. (The IP67 degree
of protection specification for the Switch refers to water penetration
while the Switch is submersed in water for a specified period of
time.)
• Always attach the cover after completing wiring and before using
the Switch. Also, do not turn ON the Switch with the cover open.
Doing so may result in electric shock.
sure to apply the proper torque to tighten each screw. The 3-conduit
models can be mounted more securely by using the four screws plus
two 5−0.105 mm diameter studs, each of which has a maximum height
of 4.8 mm as shown below.
Mounting Dimensions (M5)
3-conduit Model
Standard Model
Precautions for Correct Use
Appropriate Tightening Torque
(3)
60
30
59.3 0.1
40
(6)
42
Studs
27 0.1
Be sure to tighten each
(4)
screw of the D4B-@N
properly, otherwise the
−0.05
5
dia. height: 5 max.
−0.15
30
D4B-@N may malfunction.
(1)
Changes in Actuator Mounting Position
• To change the angle of the lever, loosen the Allen-head bolts on
the side of the lever.
• The operating position indicator plate * has protruding parts which
engage with the lever, thus allowing changes to the lever position
by 90°.
(5)
(2)
• The back of the operating position indicator plate * has no
protruding parts. If this plate is turned over and attached, any angle
within a 360° range can be set. Do not turn over the plate, however,
when using the D4B-@N as a switch with a certified direct opening
mechanism. For an SUVA- or BIA-certified application, make sure
that the lever engages with the operating position indicator plate
securely so that the lever will not slip.
Appropriate tightening
torque
Type
1
2
3
4
5
M3.5 terminal screw
Cover mounting screw *
Head mounting screw
M5 body mounting screw
Connector
0.59 to 0.78 N·m
1.18 to 1.37 N·m
0.78 to 0.88 N·m
4.90 to 5.88 N·m
1.77 to 2.16 N·m
* The operating position indicator plate: Refer to page 7.
Changes in Head Mounting Position
By removing the screws on the four corners of the head, the head can
be reset in any of four directions. Make sure that no foreign materials
will penetrate through the head.
Lever Mounting Screws (Roller
Levers)
6
4.90 to 5.88 N·m
1.27 to 1.67 N·m
Cap screw
(for three-conduit models)
---
* Apply a tightening torque of 0.78 to 0.88 N·m to three-conduit
models.
14
D4B-@N
Wiring
Conduit Opening
Do not connect the bare lead wires directly to the terminals but be
sure to connect each of them by using an insulation tube and M3.5
round crimp terminals and tighten each terminal screw within the
specified torque range.
• Make sure that each connector is tightened within the specified
torque range.
The casing may be damaged if the connector is tightened
excessively.
• If the 1/2-14NPT is used, cover the cable and conduit end with
sealing tape in order to ensure IP67.
The proper lead wire is 20 to 14 AWG (0.5 to 2.5 mm2) in size.
• The Pg13.5 connector must be Nippon Flex’s ABS-08 Pg13.5 or
ABS-12 Pg13.5.
• Use an OMRON SC-series Connector (sold separately) that is
suited to the cable in diameter.
• Properly attach the provided conduit cap to the unused conduit
opening and securely tighten the cap screw within the specified
torque when wiring the D4B-@N.
dz dia.: 3.7 mm
D dia.: 4.5 mm
B:
L:
F:
l:
7.0 mm
20.2 mm
7.7 mm
9.0 mm
D dia.
dz dia.
Make sure that all crimp terminals come into contact with the casing
or cover as shown below, otherwise the cover may not be mounted
properly or the D4B-@N may malfunction.
Others
• The load for the actuator (roller) of the Switch must be imposed on
the actuator in the horizontal direction, otherwise the actuator or
the rotating axis may be deformed or damaged.
Correct
Incorrect
Terminal screw
Correct
Incorrect
Dog
Dog
Crimp terminal
Incorrect
Correct
•
When using a long lever model like the D4B-@@16N or D4B-@@17N,
the Switch may telegraph. To avoid telegraphing, take the following
precautions.
Terminal screw
Terminal screw
Crimp
terminal
Cover
Cover
1. Set the lever to operate in one direction.
2. Modify the rear end of the dog to an angle of 15° to 30° as
shown below or to a secondary-degree curve.
Casing
Crimp terminal
Casing
θ
θ
15° ≤ θ ≤ 30°
θ ≥ 30°
3. Modify the circuit so as not to detect the wrong operating
Correct
Crimp terminal
signals.
Incorrect
Crimp terminal
Ordering Method
The D4B-@N uses a block mounting
Individual model numbers
method. Switches can be ordered either as
sets or as individual parts. If a set is
ordered, the Switch will be shipped with all
parts assembled.
+
+
+
+
Set model number
Switch Box
Head
Lever *
Example: D4B-2111N
D4B-2100N
D4B-0010N
D4B-0001N
Note: For Switches with Roller Levers, do
not order just the Head and Lever, or
just the Switch Box and Lever.
*Roller Levers only.
15
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
·
·
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
·
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2011.3
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2011 All Right Reserved.
相关型号:
D4B-1A70N
Snap Acting/Limit Switch, DPST, Momentary, 10A, 14VDC, 7mm, Screw Terminal, Top Plunger Actuator, Panel Mount
OMRON
D4B-1A71N
Snap Acting/Limit Switch, DPST, Momentary, 10A, 14VDC, 7mm, Screw Terminal, Top Roller Plunger Actuator, Panel Mount
OMRON
D4B-1A81N
Snap Acting/Limit Switch, DPST, Momentary, 10A, 14VDC, Screw Terminal, Coil Spring Type Actuator, Panel Mount
OMRON
D4B-1A87N
Snap Acting/Limit Switch, DPST, Momentary, 10A, 14VDC, Screw Terminal, Plastic Rod Actuator, Panel Mount
OMRON
©2020 ICPDF网 联系我们和版权申明