A9P23-0033 [OMRON]
Pushbutton Switch, DPDT, Momentary, 0.05A, 60VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT;型号: | A9P23-0033 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Pushbutton Switch, DPDT, Momentary, 0.05A, 60VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT 开关 光电二极管 |
文件: | 总4页 (文件大小:196K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Pushbutton Switch (Microminiaturize)
A9P
Two-point clip contact mechanism
combined with see-saw action.
• Gold-plated clip contact and cleaning mechanisms ensure high reliability.
• Specially designed to allow no grease entry into the contact portion.
• Sealed against flux entry and a built-in "O-ring ensures immersion wash ability.
• Washable models. (IP64)
• RoHS
Ordering Information
● With button
Terminal style
DIP terminal
Right Angle
Vertical Mount
Switching Function
Single Pole Double Double Pole Double Single Pole Double Double Pole Double Single Pole Double Double Pole Double
Throw
Throw
Throw
Throw
Throw
Throw
ON
ON
ON
A9P11-0031
A9P13-0031
A9P21-0031
A9P23-0031
A9P11-0032
A9P13-0032
A9P21-0032
A9P23-0032
A9P11-0033
A9P13-0033
A9P21-0033
A9P23-0033
(ON)
Note: (ON) is Momentary
● Without button
Terminal style
DIP terminal
Right Angle
Vertical Mount
Switching Function
Single Pole Double Double Pole Double Single Pole Double Double Pole Double Single Pole Double Double Pole Double
Throw
Throw
Throw
Throw
Throw
Throw
ON
ON
ON
A9P11-0011
A9P13-0011
A9P21-0011
A9P23-0011
A9P11-0012
A9P13-0012
A9P21-0012
A9P23-0012
A9P11-0013
A9P13-0013
A9P21-0013
A9P23-0013
(ON)
Note: 1. (ON) is Momentary
2. Plunger coller
Gray: Alternate
Ivory: Momentary
● Button
Available in a wide range of color.
Please order separately excluding red.
Color
White
Black
Gray
Blue
Green
A9P-051
Yellow
A9P-011
A9P-021
A9P-031
A9P-041
A9P-061
5 dia.
Configuration
4
1
Pushbutton Switch (Microminiaturize) A9P
Specifications
Switching capacity
Ambient temperature
Ambient humidity
Insulation resistance
Contact resistance
Dielectric strength
Vibration resistance
Shock resistance
AC/DC 60V 50mA, AC/DC 20mV 1μ A (minimum current)
-20 to 80 °C 60% RH Max. (with no icing or condensation)
operating : 45% to 85% (5 to 35 °C )
1000 MΩ min (Initial value)
50 mΩ max (Initial value)
500VAC for 1 min between terminals, between terminals and ground
Malfunction: 10 to 55Hz, 1.5-mm double amplitude
Malfunction: 500m/s2 min
Malfunction
Malfunction
Mechanical
Electrical
50,000 operations min
Life expectancy
Operating force
50,000 operations min
Alternate: 1.96 to 6.86 N / Momentary: 1.47 to 3.43 N
0.7 g
DIP terminal
Right Angle
Vertical Mount
Weight
0.9 g
0.9 g
Dimensions
(Unit: mm)
● DIP terminal
With button
Without button
0.3
0.5
10
2.54
0.4
3.3
3
3
0.5
10
5.5
0.3
5.6
0.3
5.6
7.5
4
7.5
0.6
J A P A N
0.6
(1)
(3)
(4)
(5)
(6)
(1)
(2)
(3)
(4)
(5)
(6)
J A P A N
0.3
8.4
5 dia.
5.08
0.3
5 dia.
5.08
8.4
2.6 dia.
JAPAN
stroke 1.5
JAPAN
Single Pole Type Double Pole Type
stroke 1.5
● Right Angle
With button
0.3
5.6
0.5
Without button
5.5
10
4
7.5
3.2
0.5
0.3
10
3.3
0.7
0.6
J A P A N
0.3
5.6
7.5
3.2
0.7
0.3
8.4
0.6
5.08
5.08
5 dia.
J A P A N
(4)
JAPAN
(1)
(2)
(3)
(4)
(5)
(6)
0.3
8.4
5 dia.
5.08
(5)
(6)
5.08
2.6 dia.
JAPAN
Single Pole Type
Double Pole Type
0.4
0.3
5.84
0.4
2.54
5.08
Pushbutton Switch (Microminiaturize) A9P
2
● Vertical Mount
With button
Without button
0.5
5.5
10
0.5
10
0.3
3.3
0.3
4
7.5
0.3
5.6
5.6
7.5
J A P A N
J A P A N
0.3
(4)
(5)
(6)
8.4
(1)
(2)
(3)
(4)
(5)
(6)
5 dia.
0.3
5 dia.
2.6 dia.
8.4
JAPAN
3.2
JAPAN
3.2
0.6
0.3
5.84
0.7
2.54
5.08
2.54
Single Pole Type
Double Pole Type
0.3
0.6
0.7
2.54
2.54
2.54
5.84
5.08
2.54
● PCB Dimensions (Top View)
DIP terminal
Right Angle
Vertical Mount
5.08
(4)
2.54
(1)
5.08
(4)
5.08
5.08
5.08
5.08
2.54
(6)
2.54
(6)
2.54
2.54
(3)
(3)
(2)
(1)
(6) (5) (4)
(6) (5) (4)
(5)
(6)
(5)
(2)
(3)
(5)
(4)
(5)
(4)
(3) (2) (1)
8-0.8 dia.
5.08
5.08
5.08
5.08
5-0.8 dia.
(1)
(6)
Double Pole Type
Single Pole Type
5-0.8 dia.
8-0.8 dia.
6-0.8 dia.
5-0.8 dia.
Single Pole Type
Double Pole Type
Single Pole Type
Double Pole Type
Switching Function / Internal Connections
Switching Function
4
6
ON
ON
ON
5
4
6
Single Pole Type
5
(4)
6
(ON)
5
1
2
5
3
4
ON
ON
ON
1
2
6
3
4
Double Pole Type
1
5
2
6
(3)
4
(ON)
5
(6)
Note: (ON) is Momentary
3
Pushbutton Switch (Microminiaturize) A9P
Safety Precautions
● Cautions
● RoHS Compliant
Use the Pushbutton Switch within the rated voltage and current
ranges, otherwise the Pushbutton Switch may have a shortened life
expectancy, radiate heat, or burn out. This particularly applies to the
instantaneous voltages and currents when switching.
The "RoHS Compliant" designation indicates that the listed models
do not contain the six hazardous substances covered by the RoHS
Directive.
Reference: The following standards are used to determine compli-
ance for the six substances.
● Handling
• Lead: 1,000 ppm max.
Do not apply excessive operating force to the Switch. Otherwise the
Switch may be damaged or deformed, and the switch mechanism
may malfunction as a result. Apply an operating force not exceeding
9.8 N. Apply the operating load from the side of the striker. Do not
apply a load from an angle or from above the striker. Doing so may
deform the Switch contact.
• Mercury: 1,000 ppm max.
• Cadmium: 100 ppm max.
• Hexavalent chromium: 1,000 ppm max.
• PBB: 1,000 ppm max.
• PBDE: 1,000 ppm max.
● Environment for Storage and Use
● Soldering
To prevent discoloration of the terminals and other problems during
storage, do not store the switch in locations subject to the following
conditions.
Observe the following conditions when soldering the Pushbutton
Switch.
1. High temperatures or humidity
2. Corrosive gases
3. Direct sunlight
Automatic Soldering Bath
Soldering temperature: 260°C max. (Preheating: 100°C 120 s)
Soldering time: 5 s max.
Also, the switch is not waterproof or splash-resistant. Do not install or
use the switch in locations that are subject to contact with water.
Do not subject the switch to freezing or condensation.
Manual Soldering
Soldering temperature: 350°C at the tip of the soldering iron.
Soldering time: 3 s max.
● Packing
● Washing
Apply alcohol or fluorine based solvents to clean.
100 per plastoc bag.
Do not clean the switch immediately after soldering. Wait for at least
five minutes after soldering before cleaning.
Ultrasonic cleaning is not available dip into the switch washing
agents for two minute maximum.
● Using Flux
Making mistakes in the type of flux or in the amount or method in
which it is applied can cause flux to enter the interior of the Switch,
with adverse effects on Switch performance. Assess the proper flux,
conditions, and methods prior to using it.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. A170-E1-01
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Electronic Components Company
Switch Division
Manual Switch Department
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Printed in Japan
0108 (0108)
Tel: (81)75-344-7096/Fax: (81)75-344-7188
相关型号:
A9PS16-0013
Pushbutton Switch, SPDT, Off-(on), Momentary, 0.1A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
OMRON
A9PS26-0011
Pushbutton Switch, DPDT, Off-(on), Momentary, 0.1A, 28VDC, Solder Terminal, Through Hole-straight, ROHS COMPLIANT
OMRON
A9PS26-0012
Pushbutton Switch, DPDT, Off-(on), Momentary, 0.1A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
OMRON
A9PS26-0013
Pushbutton Switch, DPDT, Off-(on), Momentary, 0.1A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
OMRON
©2020 ICPDF网 联系我们和版权申明