A9PS-061 [OMRON]
Ultra subminiature Pushbutton Switch;型号: | A9PS-061 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Ultra subminiature Pushbutton Switch |
文件: | 总5页 (文件大小:504K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ultra subminiature Pushbutton Switch
Ultra subminiature size.
A9PS
■
■
■
■
Gold-plated clip contact ensure high reliability.
The sealed bottom prevents flux penetration.
Washable, equivalent to IP64 (IEC-60529).
A9PS is smaller than A9P.
Height: A9P 13.3mm, A9PS 10.5mm (30% smaller than A9P)
RoHS Compliant
Typical Applications
Security Control Boards
Electric Power Instrumentation
Program Controllers
Ordering Information
Terminal Shape
DIP Terminal
Right Angle Terminal
Vertical Mount Terminal
Switching Functions
SPST
A9PS16-0011
DPST
SPST
DPST
SPST
DPST
OFF
(ON)
A9PS26-0011
A9PS16-0012
A9PS26-0012
A9PS16-0013
A9PS26-0013
Quantity per tray
100
25
50
Note: (ON) shows Momentary.
■ Caps
Available wide range og colors.
Colors
Models
White
A9PS-011
Black
Blue
Green
Yellow
Red
A9PS-021
A9PS-041
A9PS-051
A9PS-061
A9PS-071
4 dia.
Dimension
2.4
Dimension with the cap.
3.8
2.4
4 dia.
1
A9PS
A9PS
Specifications
■ Ratings/Characteristics
Switching capacity
Ambient operating temperature
Ambient operating humidity
Insulation resistance
Contact resistance
Dielectric strength
100 mA at 28 VAC/DC, 0.1 μA (minimum current) at 20 mVAC/DC
−20 °C to 80 °C 60% RH max. (with no icing or condensation)
45 to 85% RH (5 to 35 °C)
500 MΩ min. (Initial value)
80 mΩ max. (Initial value)
500 VAC for 1min between terminals, between terminals and ground
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Malufunction: 500 m/s2 min.
Vibration resistance
Shock resistance
Durability
Mechanical: 50,000 operations min.
Electrical: 50,000 operations min.
4.9 N max.
Operating forcse
Weight
0.3 g
Dimensions
Note: All units are in millimeters unless otherwise indicated.
■ DIP Terminal Models
1.6
3.3
(5.6)
2.54
0.3
4.5
0.45
0.2
4 dia.
(6)
(4)
(3)
(6)
(4)
(3)
(1)
5.08
7
2 dia.
Stroke
(1)
0.3
1
Double Pole Type
Single Pole Type
1
Marking Side
Note: NO.(4) and (6) terminals in the SPDT models are dummys to support the Switch case.
■ Right Angle Terminal Models
1.6
3.3
(5.6)
5
4.5
0.45
0.2
4 dia.
0.3
(3)
(1)
(6)
(4)
(3)
5.08
2 dia.
7
(1)
Stroke
Marking Side
Double Pole Type
Single Pole Type
1
1
0.3
2.6
3.1
2.54
5.08
2
A9PS
A9PS
■ Vertical Mount Terminal Models
(5.6)
1.6
1
3.3
5.5
2.54
0.3
4.5
0.45
7
4 dia.
(3)
(6)
(4)
(3)
(1)
2 dia.
Stroke
(1)
0.3
2.6
3.6
1
Marking Side
1
Double Pole Type
Single Pole Type
2.54
5.08
5.08
■ PCB Dimensions (Top View)
DIP Terminal Models
Right Angle Terminal Models
5.08
2.54
Six-0.6+0.1 dia.
2.54
Four-0.6 +0.1 dia.
5.08
0
Four-0.6 +0.1 dia.
0
0
(3)
(3)
(4)
(6)
(4)
(1)
5.08
(1)
5.08
5.08
(1)
(6)
(3)
Single Pole Type
Double Pole Type
Vertical Mount Terminal Models
2.54
2.54
5.08
5.08
5.08
(4)
(6)
(1)
(3)
(1)
(3)
5.08
Six-0.6+0.1 dia.
Four-0.6 +0.1 dia.
0
0
Single Pole Type
Double Pole Type
Switching Function / Internal Connections
Switching Functions
1
1
4
1
1
4
SPST Models
DPST Models
(3)
(3)
(6)
(3)
(3)
(6)
OFF
(ON)
Note: (ON) shows Momentary.
3
A9PS
A9PS
Safety Precautions
■ Cautions
■ Using Flux
Use the switch within the rated voltage and current ranges,
Making mistakes in the type of flux or in the amount or method in
which it is applied can cause flux to enter the interior of the
Switch, with adverse effects on Switch performance. Assess the
proper flux, conditions,and methods prior to using it.
otherwise the Switch may have a shortened life expectancy,
radiate heat,or burn out. This particularly applies to the
instantaneous voltages and currents when switching.
■ Hardling
■ RoHS Compliant
Do not apply excessive operating force to the Switch. Otherwise
the Switch may be damaged or deformed, and the switch
mechanism may malfunction as a result. Apply an operating force
The "RoHS Compliant" designation indicates that the listed
models do not contain the six hazardous substances covered by
the RoHS Directive.
not exceeding 9.8N {1,000gf}. Apply the operating load from the
top of the actuator. Do not apply a load from angle or from side
the actuator. Doing so may deform the Switch contact.
Reference: The following standards are used to determine
compliance for the six substances.
• Lead:
• Mercury:
• Cadmium:
1,000 ppm max.
1,000 ppm max.
100 ppm max.
■ Soldering
Observe the following conditions when soldering the Switch.
Automatic Soldering Bath
• Hexavalent chromium: 1,000 ppm max.
• PBB:
• PBDF:
1,000 ppm max.
1,000 ppm max.
Soldering temperature: 260
Soldering time: 5s max.
Manual Soldering
°C max. (Preheating: 100 °C 120s max.)
■ Environment for Storage and Use
To prevent discoloration of the terminals and other problems
during storage, do not store the Switch in locations subject to the
following conditions.
1. High temperature or humidity
2. Corrosive gases
Soldering temperature: 350 °C at the tip of the soldering iron.
Soldering time: 3s max.
■ Washing
Apply alcohol based solvents to clean.
Do not clean the Switch immediately after soldering. Wait for at
least five minutes after soldering before cleaning.
Ultrasonic cleaning is not available dip into Switch washing
agents for two minutes maximum.
3. Direct sunlight
Also, the Switch is not waterproof or splash-resistance.
Do not use the Switch in locations that are subject to contact with
water. Do not subject the Switch to freezing or condensation.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. A198-E1-02
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
OMRON SWITCH & DEVICES Corporation
Consumer & Commercial Switch Department
Marketing
2075, Miyoshi, Nakaku, Okayama
Okayama, 703-8502 Japan
Tel: (81)86-277-6024/Fax: (81)86-276-5044
URL : http://www.omron.com/ecb/
Printed in Japan
0911 (0711) (W)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
A9PS16-0011 A9PS16-0012 A9PS16-0013 A9PS26-0011 A9PS26-0012 A9PS26-0013
相关型号:
A9PS16-0013
Pushbutton Switch, SPDT, Off-(on), Momentary, 0.1A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
OMRON
A9PS26-0011
Pushbutton Switch, DPDT, Off-(on), Momentary, 0.1A, 28VDC, Solder Terminal, Through Hole-straight, ROHS COMPLIANT
OMRON
A9PS26-0012
Pushbutton Switch, DPDT, Off-(on), Momentary, 0.1A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
OMRON
A9PS26-0013
Pushbutton Switch, DPDT, Off-(on), Momentary, 0.1A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
OMRON
©2020 ICPDF网 联系我们和版权申明