2SMPP-02 [OMRON]
MEMS Gauge Pressure Sensor; MEMS压力计压力传感器型号: | 2SMPP-02 |
厂家: | OMRON ELECTRONICS LLC |
描述: | MEMS Gauge Pressure Sensor |
文件: | 总8页 (文件大小:352K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2MESMSMGauPge PPressure Sensor
MEMS Gauge Pressure Sensor Featuring
Small Size and Low Power Consumption
• Ultra-miniature 6.1 × 4.7 × 8.2 mm (L × W × H).
• Piezo Resistive element provides electrical characteristics
that are superior to capacitive type pressure sensors.
• 0 to 37 kPa pressure range.
• Low Power consumption of 0.2 mW
• Low Temperature Influence
• RoHS Compliant
Ordering Information
Standard Models with Surface mount package
Classification
Bottom Port Type
Structure
Packaging
Plastic sleeve
Model
SOP
2SMPP-02
Terminal Arrangement
Application Examples
• Medical equipment
• Home appliance
• Air movement control
• Level indicators
Icc
Vout (+)
Non Conneted
Nsub
• Leak detection
• Pressure controller
Vout (−)
GND
MEMS Gauge Pressure Sensor 2SMPP
35
Specifications
■ Ratings
Item
2SMPP-02
Pressure type
Sensing type
Applicable gases
Gauge Pressure
Piezo Resistive
Air (Non-corrosive, dust free)
0 to 37 kPa
Ratings
Pressure range
Withstand pressure
Max. 53 kPa
Supply current
100 μADC
Current consumption
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Ambient storage humidity
Max. 130 μADC
0 to 50°C (with no icing or condensation)
15 to 90%RH (with no icing or condensation)
−30 to 85°C (with no icing or condensation)
10 to 95%RH (with no icing or condensation)
Note: 1. The above values are initial values measured at ambient temperature condition of 23°C.
2. Please avoid caustic gases.
3. Standard product is not calibrated for negative pressures.
■ Electrical Characteristics
Item
2SMPP-02
Bridge resistance
20 ± 2 kΩ
Offset voltage (See note 2.)
Span voltage (See note 2.)
Non-Linearity (See note 2.)
Hysteresis (See note 2.)
Temperature influence of Span
−2.5 ± 4.0 mV
31.0 ± 3.1 mV (at 37 kPa)
0 ± 0.8%FS (0 to 37 kPa)
0 ± 0.5%FS (0 to 37 kPa)
0.5 ± 1.0%FS (at 0°C)
0.3 ± 1.0%FS (at 50°C)
0 ± 3.0%FS (0 to 25°C)
0 ± 3.0%FS (25 to 50°C)
Temperature influence of Offset
Note: 1. The above values are initial values measured at ambient temperature condition of 23°C.
2. Not including temperature influence.
■ Environment Characteristics
Item
2SMPP-02
Vibration resistance
Destruction
Malfunction
Destruction
Malfunction
10 Hz to 500 Hz 10 G
10 Hz to 500 Hz 10 G
15 G
Shock resistance
15 G
Life Expectancy
ESD
300,000 Operations min. (0 to 39 kPa)
1000 V (Human body model)
0.17 g
Weight
Package Material
PPS (Polyphenylenesulfide)
36
MEMS Gauge Pressure Sensor 2SMPP
Engineering Data (for reference)
■ Output Characteristics
Rated Pressure vs. Output Voltage
40
35
30
25
20
15
10
5
0
−5
0
10
20
30
40
50
Rated Pressure [kPa]
Note: 1. Ambient temperature condition: 25°C
2. Drive current: 100 μA
3. These output voltage characteristics are measured with tester without a mounting board.
4. The output voltage characteristics may be influenced by the mounting board. Be sure to check operation including durability in actual
equipment before use.
Temperature influence of Span voltage
Temperature influence of Offset voltage
2.0
2.0
1.5
1.0
1.5
1.0
0.5
0.5
0.0
−0.5
−1.0
−1.5
−2.0
0.0
−0.5
−1.0
−10
0
10
20
30
40
50
60
−10
0
10
20
30
40
50
60
Temperature [°C]
Temperature [°C]
Note: 1. Measured points are 0°C and 25°C, 50°C
2. Drive current: 100 μA
3. These output voltage characteristics are measured with tester without a mounting board.
4. The output voltage characteristics may be influenced by the mounting board. Be sure to check operation including durability in actual
equipment before use.
MEMS Gauge Pressure Sensor 2SMPP
37
Pressure cycle range (0 to 40 kPa)
1
1
0.5
0
0.5
0
−0.5
−1
−0.5
−1
0
100000
200000
300000
0
100000
200000
300000
Pressure cycle
Pressure cycle
Note: 1. Tested temperature condition: 25°C
2. Number of pressure cycle time: 3 x 105
3. Rated cycle pressure: 0 to 40 kPa
4. These output voltage characteristics are measured with tester without a mounting board.
Example of application circuit for MEMS Pressure Sensor
VDD
Constant current circuit unit
Amplifier circuit unit
Pressure
Sensor
+
−
+
−
−
+
Vout
−
+
1. The pressure sensor is designed to convert a voltage by means of constant current drive.
2. Please amplify the output voltage of the pressure sensor by using the amplifying circuit if necessary.
38
MEMS Gauge Pressure Sensor 2SMPP
Dimensions
Note: All units are in millimeters unless otherwise indicated.
2SMPP-02
4.75
4.00
0.05
0.25
3
#1
φ3.80
φ0.62
6.15 5.40
4-R0.50
9.85
3.20
4
6
1.27
0.40
1.27 x 2 = 2.54
1.00
2.00
The tolerance is 0.3mm unless otherꢀise specified.
1.50
2.80
1.00
(1.10)
4.75
φ1.80
φ2.60
Top view
1
2
3
6
5
6
Vout (+)
Icc
NC
N-sub
Vout (-)
GND
Marking
5.45
0.10
0.75
0.90
1.125
1.125
P P 0 2
4.05
0.45
5 6 7 8
(0.90)
1.65
1.65
LOT NUMBER
(1.075)
3.30
MEMS Gauge Pressure Sensor 2SMPP
39
Precautions
■ Precautions for Correct Use
Handling
Mounting
• Only air can be used as pressure media on the products directly. It
is prohibited to use pressure media including corrosive gases (e.g.
organic solvents gases, sulfur dioxide and hydrogen sulfide gases),
fluid and any other foreign materials.
• Use lands on the printed-circuit boards to which the sensor can be
securely fixed.
• Fix pin No.2 on the printed-circuit boards, not fixed causes fluctua-
tion of sensor output signals.
• The products are not water proof. Please keep dry in use.
Soldering
• Don't use the products under dew-condensing conditions. Frozen
fluid on sensor chips may also cause fluctuation of sensor output
and other troubles.
• Due to its small size, the thermal capacity of the pressure sensor is
low. Therefore, take steps to minimize the effects of external heat.
• Don't put foreign materials (e.g. a wire or pin) into connecting tube.
It may cause breakage of pressure sensor chips or fluctuation of
sensor output caused by clogging the tube.
• Use the products within rated pressure. Usage at pressure out of
the range may cause breakage.
• Dip soldering bath: Max.260°C, within 10 sec.
• Soldering iron: Max. 260°C, within 10 sec.
• Do not heat the case of sensor package, heat only terminal.
• Use a non-corrosive resin type of flux. Since the pressure sensor
chip is exposed to the atmosphere, do not allow flux to enter inside.
• Don't use under high-frequency vibration including ultrasonic wave.
Cleaning
• The products may be broken by static electricity. Charged materials
(e.g. a workbench and a floor) and workers must provide measures
against static electricity, including ground connection.
• Since the pressure sensor chip is exposed to atmosphere, do not
allow cleaning fluid to enter inside.
• Overpowering terminals may deform them and detract their solder-
ability. Don't drop or handle the products roughly.
• Avoid ultrasonic cleaning since this may cause breaks or discon-
nections in the wiring.
• Don't use the products under humid or dusty condition.
• Terminals connection of pressure sensors must be handled as
directed by a connection diagram.
Coating
• Do not coat the pressure sensor when it is mounted to the print cir-
cuit board.
• Do not wash the print circuit board after the pressure sensor is
mounted using detergent containing silicone. Otherwise, the deter-
gent may remain on the surface of the pressure sensor.
Environmental Conditions for Transport and Storage
• It is prohibited to keep the products with corrosive gases (e.g.
organic solvents gases, sulfur dioxide and hydrogen sulfide gases).
• The products are not water proof. Please keep dry during storage.
• An anti-static treatment has been applied to the sleeves. Please
note the following points.
1. Getting wet may remove an anti-static treatment and elimi-
nate its effect.
2. The sleeves may feel sticky under hot and humid condition
due to the nature of the anti-static treatment.
3. Anti-static has aging degradation. It is prohibited to keep the
sleeves for more than six months. The sleeves are also non-
reusable.
• Don't keep the products under humid or dusty condition.
40
MEMS Gauge Pressure Sensor 2SMPP
MEMO
MEMS Gauge Pressure Sensor 2SMPP
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
10/10
Specifications subject to change without notice
Printed in USA
Cat. No. X305-E-1
MEMS Gauge Pressure Sensor 2SMPP
相关型号:
©2020 ICPDF网 联系我们和版权申明