PSMN070-200B/T3 [NXP]
暂无描述;DISCRETE SEMICONDUCTORS
DATA SHEET
PSMN070-200B; PSMN070-200P
N-channel TrenchMOS(TM)
transistor
Product specification
August 1999
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor PSMN070-200B; PSMN070-200P
FEATURES
SYMBOL
QUICK REFERENCE DATA
d
• ’Trench’ technology
• Very low on-state resistance
• Fast switching
VDSS = 200 V
ID = 35 A
• Low thermal resistance
g
RDS(ON) ≤ 70 mΩ
s
GENERAL DESCRIPTION
SiliconMAX products use the latest Philips Trench technology to achieve the lowest possible on-state resistance in
each package at each voltage rating.
Applications:-
• d.c. to d.c. converters
• switched mode power supplies
The PSMN070-200P is supplied in the SOT78 (TO220AB) conventional leaded package.
The PSMN070-200B is supplied in the SOT404 surface mounting package.
PINNING
SOT78 (TO220AB)
SOT404 (D2PAK)
PIN
DESCRIPTION
tab
tab
1
2
gate
drain1
3
source
drain
2
tab
1
3
1 2 3
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134)
SYMBOL PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
VDSS
VDGR
VGS
ID
Drain-source voltage
Drain-gate voltage
Gate-source voltage
Continuous drain current
Tj = 25 ˚C to 175˚C
Tj = 25 ˚C to 175˚C; RGS = 20 kΩ
-
-
-
-
200
200
± 20
35
V
V
V
A
A
Tmb = 25 ˚C
Tmb = 100 ˚C
-
25
IDM
PD
Tj, Tstg
Pulsed drain current
Total power dissipation
Operating junction and
storage temperature
Tmb = 25 ˚C
Tmb = 25 ˚C
-
-
140
250
175
A
W
˚C
- 55
1 It is not possible to make connection to pin:2 of the SOT404 package
August 1999
2
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor
PSMN070-200B; PSMN070-200P
AVALANCHE ENERGY LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134)
SYMBOL PARAMETER
EAS Non-repetitive avalanche
CONDITIONS
MIN.
MAX.
UNIT
Unclamped inductive load, IAS = 35 A;
tp = 100 µs; Tj prior to avalanche = 25˚C;
-
462
mJ
energy
VDD ≤ 50 V; RGS = 50 Ω; VGS = 10 V; refer
to fig:15
IAS
Non-repetitive avalanche
current
-
35
A
THERMAL RESISTANCES
SYMBOL PARAMETER
CONDITIONS
TYP.
MAX.
UNIT
Rth j-mb
Thermal resistance junction
to mounting base
-
0.6
K/W
Rth j-a
Thermal resistance junction SOT78 package, in free air
to ambient SOT404 package, pcb mounted, minimum
footprint
60
50
-
-
K/W
K/W
ELECTRICAL CHARACTERISTICS
Tj= 25˚C unless otherwise specified
SYMBOL PARAMETER
V(BR)DSS Drain-source breakdown
CONDITIONS
MIN. TYP. MAX. UNIT
VGS = 0 V; ID = 0.25 mA;
VDS = VGS; ID = 1 mA
200
178
-
-
-
-
V
V
voltage
Gate threshold voltage
Tj = -55˚C
VGS(TO)
2.0
1.0
3.0
-
4.0
-
V
V
Tj = 175˚C
Tj = -55˚C
-
-
-
-
-
-
-
60
-
2
0.05
-
6
V
RDS(ON)
Drain-source on-state
resistance
VGS = 10 V; ID = 17 A
70
203
100
10
500
mΩ
mΩ
nA
µA
µA
Tj = 175˚C
IGSS
IDSS
Gate source leakage current VGS = ±10 V; VDS = 0 V
Zero gate voltage drain
current
VDS = 200 V; VGS = 0 V;
Tj = 175˚C
Qg(tot)
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain (Miller) charge
ID = 35 A; VDD = 160 V; VGS = 10 V
-
-
-
77
16
28
-
-
-
nC
nC
nC
td on
tr
td off
tf
Turn-on delay time
Turn-on rise time
Turn-off delay time
Turn-off fall time
VDD = 100 V; RD = 2.7 Ω;
VGS = 10 V; RG = 5.6 Ω
Resistive load
-
-
-
-
22
100
80
-
-
-
-
ns
ns
ns
ns
90
Ld
Ld
Internal drain inductance
Internal drain inductance
Measured from tab to centre of die
Measured from drain lead to centre of die
(SOT78 package only)
-
-
3.5
4.5
-
-
nH
nH
Ls
Internal source inductance
Measured from source lead to source
bond pad
-
7.5
-
nH
Ciss
Coss
Crss
Input capacitance
Output capacitance
Feedback capacitance
VGS = 0 V; VDS = 25 V; f = 1 MHz
-
-
-
4570
370
160
-
-
-
pF
pF
pF
August 1999
3
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor
PSMN070-200B; PSMN070-200P
REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS
Tj = 25˚C unless otherwise specified
SYMBOL PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
IS
Continuous source current
(body diode)
Pulsed source current (body
diode)
Diode forward voltage
-
-
-
-
35
140
1.2
A
A
V
ISM
-
VSD
IF = 25 A; VGS = 0 V
0.85
trr
Qrr
Reverse recovery time
Reverse recovery charge
IF = 20 A; -dIF/dt = 100 A/µs;
VGS = 0 V; VR = 30 V
-
-
160
1.0
-
-
ns
µC
August 1999
4
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor
PSMN070-200B; PSMN070-200P
Transient thermal impedance, Zth j-mb (K/W)
1
Normalised Power Derating, PD (%)
100
D = 0.5
90
80
70
60
50
40
30
20
10
0
0.2
0.1
0.1
0.05
0.02
P
D = tp/T
D
0.01
tp
single pulse
T
0.001
1E-06
1E-05
1E-04
1E-03
1E-02
1E-01
1E+00
0
25
50
75
100
125
150
175
Pulse width, tp (s)
Mounting Base temperature, Tmb (C)
Fig.1. Normalised power dissipation.
PD% = 100 PD/PD 25 ˚C = f(Tmb)
Fig.4. Transient thermal impedance.
th j-mb = f(t); parameter D = tp/T
Z
Drain Current, ID (A)
Tj = 25 C
40
35
30
25
20
15
10
5
Normalised Current Derating, ID (%)
VGS = 10V
100
90
80
70
60
50
40
30
20
10
0
8 V
6 V
5.2 V
5 V
4.8 V
4.6 V
4.4 V
4.2 V
0
0
25
50
75
100
125
150
175
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
Mounting Base temperature, Tmb (C)
Drain-Source Voltage, VDS (V)
Fig.2. Normalised continuous drain current.
Fig.5. Typical output characteristics, Tj = 25 ˚C.
ID = f(VDS)
ID% = 100 ID/ID 25 ˚C = f(Tmb); VGS ≥ 10 V
Peak Pulsed Drain Current, IDM (A)
1000
Drain-Source On Resistance, RDS(on) (Ohms)
0.2
4.4 V
4.6 V
Tj = 25 C
0.18
0.16
0.14
0.12
0.1
4.2 V
RDS(on) = VDS/ ID
4.8 V
100
10
1
tp = 10 us
5 V
100 us
1 ms
5.2 V
0.08
0.06
0.04
0.02
0
6V
D.C.
VGS = 10V
10 ms
8 V
100 ms
1
10
100
1000
0
5
10
15
20
25
30
35
40
Drain-Source Voltage, VDS (V)
Drain Current, ID (A)
Fig.3. Safe operating area
ID & IDM = f(VDS); IDM single pulse; parameter tp
Fig.6. Typical on-state resistance, Tj = 25 ˚C.
RDS(ON) = f(ID)
August 1999
5
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor
PSMN070-200B; PSMN070-200P
Threshold Voltage, VGS(TO) (V)
4.5
Drain current, ID (A)
40
VDS > ID X RDS(ON)
4
maximum
35
3.5
30
25
typical
3
2.5
2
20
15
10
5
175 C
minimum
1.5
1
Tj = 25 C
0.5
0
0
0
1
2
3
4
5
6
-60 -40 -20
0
20 40 60 80 100 120 140 160 180
Junction Temperature, Tj (C)
Gate-source voltage, VGS (V)
Fig.7. Typical transfer characteristics.
ID = f(VGS)
Fig.10. Gate threshold voltage.
VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS
Transconductance, gfs (S)
VDS > ID X RDS(ON)
Drain current, ID (A)
50
45
40
35
30
25
20
15
10
5
1.0E-01
Tj = 25 C
1.0E-02
1.0E-03
1.0E-04
1.0E-05
1.0E-06
175 C
minimum
typical
maximum
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
0
5
10
15
20
25
30
35
40
Gate-source voltage, VGS (V)
Drain current, ID (A)
Fig.8. Typical transconductance, Tj = 25 ˚C.
gfs = f(ID)
Fig.11. Sub-threshold drain current.
ID = f(VGS); conditions: Tj = 25 ˚C
Normalised On-state Resistance
2.9
2.7
2.5
2.3
2.1
1.9
1.7
1.5
1.3
1.1
0.9
0.7
0.5
Capacitances, Ciss, Coss, Crss (pF)
10000
1000
100
Ciss
Coss
Crss
10
-60 -40 -20
0
20 40 60 80 100 120 140 160 180
0.1
1
10
100
Junction temperature, Tj (C)
Drain-Source Voltage, VDS (V)
Fig.9. Normalised drain-source on-state resistance.
RDS(ON)/RDS(ON)25 ˚C = f(Tj)
Fig.12. Typical capacitances, Ciss, Coss, Crss.
C = f(VDS); conditions: VGS = 0 V; f = 1 MHz
August 1999
6
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor
PSMN070-200B; PSMN070-200P
Gate-source voltage, VGS (V)
15
Maximum Avalanche Current, IAS (A)
100
ID = 35 A
14
13
12
11
10
9
Tj = 25 C
VDD = 40 V
25 C
VDD = 160 V
8
10
7
6
5
4
Tj prior to avalanche = 150 C
3
2
1
0
1
0.001
0
10
20
30
40
50
60
70
80
90
100
0.01
0.1
1
10
Gate charge, QG (nC)
Avalanche time, tAV (ms)
Fig.13. Typical turn-on gate-charge characteristics.
GS = f(QG)
Fig.15. Maximum permissible non-repetitive
avalanche current (IAS) versus avalanche time (tAV);
unclamped inductive load
V
Source-Drain Diode Current, IF (A)
VGS = 0 V
40
35
30
25
20
15
10
5
175 C
Tj = 25 C
0
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
Source-Drain Voltage, VSDS (V)
1
1.1 1.2
Fig.14. Typical reverse diode current.
IF = f(VSDS); conditions: VGS = 0 V; parameter Tj
August 1999
7
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor
PSMN070-200B; PSMN070-200P
MECHANICAL DATA
Plastic single-ended package; heatsink mounted; 1 mounting hole; 3-lead TO-220
SOT78
E
P
A
A
1
q
D
1
D
(1)
L
L
2
1
Q
b
1
L
1
2
3
b
c
e
e
0
5
10 mm
scale
DIMENSIONS (mm are the original dimensions)
(1)
L
2
b
e
A
b
D
E
L
D
L
1
A
c
UNIT
P
q
Q
1
1
1
max.
4.5
4.1
1.39
1.27
0.9
0.7
1.3
1.0
0.7
0.4
15.8
15.2
6.4
5.9
10.3
9.7
15.0
13.5
3.30
2.79
3.8
3.6
3.0
2.7
2.6
2.2
mm
3.0
2.54
Note
1. Terminals in this zone are not tinned.
REFERENCES
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
JEDEC
EIAJ
97-06-11
SOT78
TO-220
Fig.16. SOT78 (TO220AB); pin 2 connected to mounting base (Net mass:2g)
Notes
1. This product is supplied in anti-static packaging. The gate-source input must be protected against static
discharge during transport or handling.
2. Refer to mounting instructions for SOT78 (TO220AB) package.
3. Epoxy meets UL94 V0 at 1/8".
August 1999
8
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor
PSMN070-200B; PSMN070-200P
MECHANICAL DATA
2
Plastic single-ended surface mounted package (Philips version of D -PAK); 3 leads
(one lead cropped)
SOT404
A
A
E
1
mounting
base
D
1
D
H
D
2
L
p
1
3
c
b
e
e
Q
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
D
E
A
A
b
UNIT
c
D
e
L
H
Q
1
1
p
D
max.
4.50
4.10
1.40
1.27
0.85
0.60
0.64
0.46
1.60
1.20
10.30
9.70
2.90 15.40 2.60
2.10 14.80 2.20
mm
11
2.54
REFERENCES
JEDEC
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
EIAJ
98-12-14
99-06-25
SOT404
Fig.17. SOT404 surface mounting package. Centre pin connected to mounting base.
Notes
1. This product is supplied in anti-static packaging. The gate-source input must be protected against static
discharge during transport or handling.
2. Refer to SMD Footprint Design and Soldering Guidelines, Data Handbook SC18.
3. Epoxy meets UL94 V0 at 1/8".
August 1999
9
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor
PSMN070-200B; PSMN070-200P
MOUNTING INSTRUCTIONS
Dimensions in mm
11.5
9.0
17.5
2.0
3.8
5.08
Fig.18. SOT404 : soldering pattern for surface mounting.
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Philips Electronics N.V. 1999
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
August 1999
10
Rev 1.000
Philips Semiconductors
Product specification
N-channel TrenchMOS(TM) transistor
PSMN070-200B; PSMN070-200P
NOTES
August 1999
11
Rev 1.000
Philips Semiconductors – a worldwide company
Argentina: see South America
Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,
Tel. +31 40 27 82785, Fax. +31 40 27 88399
Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140,
Tel. +61 2 9704 8141, Fax. +61 2 9704 8139
New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,
Tel. +64 9 849 4160, Fax. +64 9 849 7811
Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213,
Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210
Norway: Box 1, Manglerud 0612, OSLO,
Tel. +47 22 74 8000, Fax. +47 22 74 8341
Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,
220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773
Pakistan: see Singapore
Belgium: see The Netherlands
Brazil: see South America
Philippines: Philips Semiconductors Philippines Inc.,
106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474
Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,
51 James Bourchier Blvd., 1407 SOFIA,
Tel. +359 2 68 9211, Fax. +359 2 68 9102
Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW,
Tel. +48 22 5710 000, Fax. +48 22 5710 001
Portugal: see Spain
Romania: see Italy
Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
China/Hong Kong: 501 Hong Kong Industrial Technology Centre,
72 Tat Chee Avenue, Kowloon Tong, HONG KONG,
Tel. +852 2319 7888, Fax. +852 2319 7700
Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,
Tel. +7 095 755 6918, Fax. +7 095 755 6919
Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762,
Colombia: see South America
Czech Republic: see Austria
Tel. +65 350 2538, Fax. +65 251 6500
Slovakia: see Austria
Slovenia: see Italy
Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V,
Tel. +45 33 29 3333, Fax. +45 33 29 3905
South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,
2092 JOHANNESBURG, P.O. Box 58088 Newville 2114,
Tel. +27 11 471 5401, Fax. +27 11 471 5398
Finland: Sinikalliontie 3, FIN-02630 ESPOO,
Tel. +358 9 615 800, Fax. +358 9 6158 0920
France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex,
Tel. +33 1 4099 6161, Fax. +33 1 4099 6427
South America: Al. Vicente Pinzon, 173, 6th floor,
04547-130 SÃO PAULO, SP, Brazil,
Tel. +55 11 821 2333, Fax. +55 11 821 2382
Germany: Hammerbrookstraße 69, D-20097 HAMBURG,
Tel. +49 40 2353 60, Fax. +49 40 2353 6300
Spain: Balmes 22, 08007 BARCELONA,
Tel. +34 93 301 6312, Fax. +34 93 301 4107
Hungary: see Austria
Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,
Tel. +46 8 5985 2000, Fax. +46 8 5985 2745
India: Philips INDIA Ltd, Band Box Building, 2nd floor,
254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025,
Tel. +91 22 493 8541, Fax. +91 22 493 0966
Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,
Tel. +41 1 488 2741 Fax. +41 1 488 3263
Indonesia: PT Philips Development Corporation, Semiconductors Division,
Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510,
Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080
Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1,
TAIPEI, Taiwan Tel. +886 2 2134 2886, Fax. +886 2 2134 2874
Ireland: Newstead, Clonskeagh, DUBLIN 14,
Tel. +353 1 7640 000, Fax. +353 1 7640 200
Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,
209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260,
Tel. +66 2 745 4090, Fax. +66 2 398 0793
Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053,
TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007
Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye,
ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813
Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI),
Tel. +39 039 203 6838, Fax +39 039 203 6800
Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,
252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461
Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku,
TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057
United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,
MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421
Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,
Tel. +82 2 709 1412, Fax. +82 2 709 1415
United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,
Tel. +60 3 750 5214, Fax. +60 3 757 4880
Uruguay: see South America
Vietnam: see Singapore
Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,
Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087
Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,
Middle East: see Italy
Tel. +381 11 3341 299, Fax.+381 11 3342 553
For all other countries apply to: Philips Semiconductors,
Internet: http://www.semiconductors.philips.com
International Marketing & Sales Communications, Building BE-p, P.O. Box 218,
5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825
69
SCA
© Philips Electronics N.V. 2000
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
603502/300/03/pp12
Date of release: August 1999
Document order number: 9397 750 06972
相关型号:
PSMN071-100NSE
N-channel 100 V, 81 mOhm standard level ‘ASFET with enhanced SOA’ in DFN2020 package, designed specifically for Power-over-ethernet (PoE) applicationsDevelopment
NEXPERIA
PSMN072-100MSE
N-channel 100 V 76 mOhm standard level ASFET with enhanced SOA in LFPAK33. Designed specifically for Power-over-ethernet (PoE) applicationsDevelopment
NEXPERIA
PSMN075-100MSE
N-channel 100 V 71 m standard level MOSFET in LFPAK33 designed specifically for PoE applications
NXP
PSMN075-100MSE
N-channel 100 V 71 mΩ standard level MOSFET in LFPAK33 designed specifically for PoE applicationsProduction
NEXPERIA
PSMN075-100MSEX
PSMN075-100MSE - N-channel 100 V 71 mΩ standard level MOSFET in LFPAK33 designed specifically for PoE applications
NXP
PSMN0R7-25YLD
N-channel 25 V, 0.72 mΩ, 300 A logic level MOSFET in LFPAK56 using NextPowerS3 TechnologyProduction
NEXPERIA
©2020 ICPDF网 联系我们和版权申明