CBTD3257PW [NXP]
Quad 1-of-2 multiplexer/demultiplexer with level shifting; 四-1- - 2多路复用器/多路分解器具有电平移动型号: | CBTD3257PW |
厂家: | NXP |
描述: | Quad 1-of-2 multiplexer/demultiplexer with level shifting |
文件: | 总11页 (文件大小:97K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
CBTD3257
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
Preliminary data
2002 Sep 09
Philips
Semiconductors
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
FEATURES
PIN CONFIGURATION
• 5 Ω switch connection between two ports
V
1
16
15
14
13
12
11
10
9
CC
S
• TTL-compatible input levels
2
3
4
5
6
7
8
1B1
1B2
1A
OE
4B1
4B2
4A
• Designed to be used in level shifting applications
• Minimal propagation delay through the switch
• Latch-up protection exceeds 500 mA per JESD78
2B1
2B2
2A
3B1
3B2
3A
• ESD protection exceeds 2000 V HBM per JESD22-A114,
200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101
GND
DESCRIPTION
SA00533
The CBTD3257 is a quad 1-of-2 high-speed TTL-compatible
multiplexer/demultiplexer. The low on resistance of the switch allows
inputs to be connected to outputs without adding propagation delay
or generating additional ground bounce noise.
PIN DESCRIPTION
PIN NUMBER
SYMBOL
NAME AND FUNCTION
Output Enable (OE) and select-control (S) inputs select the
appropriate B1 and B2 outputs for the A-input data.
1
S
Select-control input
2, 3,
5, 6,
10, 11,
13, 14
1B1, 1B2,
2B1, 2B2
3B1, 3B2
4B1, 4B2
Internal diode allows voltage level shifting from 5 V inputs to 3.3 V
outputs.
B outputs
The CBTD3257 is characterized for operation from –40 to +85 °C.
4, 7, 9, 12
1A, 2A, 3A, 4A A inputs
8
GND
OE
Ground (0 V)
15
16
Output enable
V
CC
Positive supply voltage
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
ORDER CODE
TOPSIDE MARK
CBTD3257D
CD3257
DWG NUMBER
SOT109-1
16-pin plastic SO
–40 to 85 °C
CBTD3257D
CBTD3257DB
CBTD3257DS
CBTD3257PW
16-pin plastic SSOP
–40 to 85 °C
SOT338-1
16-pin plastic SSOP (QSOP)
16-pin plastic TSSOP
–40 to 85 °C
CBD3257
SOT519-1
–40 to 85 °C
CBD3257
SOT403-1
Standard packing quantities and other packaging data is available at www.philipslogic.com/packaging.
2
2002 Sep 09
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
LOGIC DIAGRAM (positive logic)
FUNCTION TABLE
INPUTS
4
2
3
FUNCTION
1A
2A
3A
4A
1B1
1B2
2B1
2B2
3B1
3B2
4B1
4B2
OE
L
S
L
A port = B1 port
A port = B2 port
Disconnect
L
H
X
H
7
5
6
9
11
10
14
13
12
1
S
15
OE
SA00532
3
2002 Sep 09
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
1
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
DC supply voltage
CONDITIONS
RATING
–0.5 to +7.0
–0.5 to +7.0
128
UNIT
V
V
CC
2
V
I
DC input voltage
V
Continuous channel current
Input clamp current
mA
mA
°C
I
K
V
I/O
< 0
–50
T
stg
Storage temperature range
–65 to +150
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
LIMITS
SYMBOL
PARAMETER
UNIT
MIN
4.5
2.0
—
MAX
5.5
V
CC
DC supply voltage
V
V
V
IH
High-level input voltage
Low-level Input voltage
—
V
IL
0.8
V
T
amb
Operating free-air temperature range
–40
+85
°C
NOTE:
1. All unused control inputs of the device must be held at V or GND to ensure proper device operation.
CC
DC ELECTRICAL CHARACTERISTICS
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
T
MIN
—
= –40 to +85 °C
UNIT
amb
1
TYP
MAX
V
IK
Input clamp voltage
V
CC
= 4.5 V; I = –18 mA
—
–1.2
V
I
V
P
Pass voltage
V = V = 5.5 V; I/O = –100 mA
See Figure 1
I
CC
I
Input leakage current
Quiescent supply current
V
V
V
= 5.5 V; V = GND or 5.5 V
—
—
—
—
±1
µA
I
CC
CC
CC
I
I
= 5.5 V; I = 0, V = V or GND
1.5
mA
CC
O
I
CC
= 5.5 V, one input at 3.4 V,
2
∆I
CC
Additional supply current per input pin
—
—
2.5
mA
other inputs at V or GND
CC
C
Control pins
V = 3 V or 0
—
—
—
—
—
—
4.5
12.5
6.5
5
—
—
—
7
pF
pF
pF
Ω
I
I
A port
B port
V
V
V
V
V
= 3 V or 0; OE = V
= 3 V or 0; OE = V
O
CC
CC
C
Power-off leakage current
On-resistance
IO(OFF)
O
= 4.5 V; V = 0V; I = 64 mA
CC
CC
CC
I
I
3
r
= 4.5 V; V = 0V; I = 30 mA
5
7
Ω
I
I
on
= 4.5 V; V = 2.4 V; I = 15 mA
16
50
Ω
I
I
NOTES:
1. All typical values are at V = 5 V, T
= 25 °C.
amb
CC
2. This is the increase in supply current for each input that is at the specified TTL voltage level rather than V or GND
CC
3. Measured by the voltage drop between the A and the B terminals at the indicated current through the switch.
On-state resistance is determined by the lowest voltage of the two (A or B) terminals.
4
2002 Sep 09
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
AC CHARACTERISTICS
T
amb
= –40 to +85 °C; C = 50 pF
L
LIMITS
TO
(OUTPUT)
V
CC
= +5.0 V ±0.5 V
SYMBOL
PARAMETER
FROM (INPUT)
UNIT
MIN
—
MAX
0.25
11.0
11.2
10.8
6.0
1
t
t
Propagation delay
A or B
S
B or A
A
ns
ns
ns
ns
ns
ns
pd
Propagation delay
1.6
1.8
1.6
2.2
2.0
pd
OE
S
A or B
B
Output enable time
to High and Low level
t
en
OE
S
A or B
B
Output disable time
from High and Low level
t
dis
8.0
NOTE:
1. The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load capacitance,
when driven by an ideal voltage source (zero output impedance).
AC WAVEFORMS
TEST CIRCUIT AND WAVEFORMS
V
= 1.5 V, V = GND to 3.0 V
M
IN
7 V
3 V
0 V
500 Ω
S1
From Output
Under Test
Open
GND
1.5 V
1.5 V
INPUT
500 Ω
C
= 50 pF
L
t
t
PHL
PLH
Load Circuit
V
OH
1.5 V
1.5 V
TEST
S1
OUTPUT
t
open
7 V
pd
V
OL
t
/t
PLZ PZL
SA00028
t
/t
open
PHZ PZH
Waveform 1. Input to Output Propagation Delays
DEFINITIONS
C
=
Load capacitance includes jig and probe capacitance;
see AC CHARACTERISTICS for value.
L
3 V
Output Control
(Low-level
SA00012
1.5 V
1.5 V
enabling )
NOTES:
1. All input pulses are supplied by generators having the following
characteristics: PRR ≤ 10 MHz, Z = 50 Ω, t ≤ 2.5 ns, t ≤ 2.5 ns.
0 V
t
t
PLZ
PZL
O
r
f
3.5 V
2. The outputs are measured one at a time with one transition per
Output
Waveform 1
S1 at 7 V
measurement.
1.5 V
1.5 V
V
V
+ 0.3 V
– 0.3 V
OL
(see Note)
V
V
OL
t
t
PHZ
PZH
OH
Output
Waveform 2
S1 at Open
(see Note)
OH
0 V
Note:
Waveform 1 is for an output with internal conditions such that
the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that
the output is high except when disabled by the output control.
SA00029
Waveform 2. 3-State Output Enable and Disable Times
NOTES:
1. t
2. t
3. t
and t
and t
and t
are the same as t
.
dis
.
pd
PLZ
PZL
PLH
PHZ
are the same as t
PZH
en
are the same as t .
PHL
5
2002 Sep 09
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
TYPICAL CHARACTERISTICS
Temp = 85 °C
Temp = 70 °C
3.8
3.6
3.8
100 µA
3.6
100 µA
3.4
3.2
3.0
2.8
2.6
3.4
6 mA
V
P
V
P
6 mA
12 mA
24 mA
3.2
3.0
2.8
2.6
12 mA
24 mA
2.4
2.2
2.4
2.2
4.4
4.6
4.8
5.0
5.2
5.4
5.6
4.4
4.6
4.8
5.0
5.2
5.4
5.6
V
– Supply Voltage
CC
V
– Supply Voltage
CC
Temp = 25 °C
3.6
3.4
100 µA
3.2
6 mA
V
P
12 mA
3.0
2.8
2.6
2.4
2.2
24 mA
4.4
4.6
4.8
5.0
5.2
5.4
5.6
V
– Supply Voltage
CC
Temp = 0 °C
Temp = –40 °C
3.6
3.4
3.2
3.0
2.8
2.6
100 µA
100 µA
3.4
3.2
3.0
2.8
2.6
6 mA
6 mA
12 mA
24 mA
V
12 mA
P
24 mA
V
P
2.4
2.2
2.4
2.2
2.0
4.4
4.6
4.8
5.0
5.2
5.4
5.6
2.0
V
– Supply Voltage
CC
4.4
4.6
4.8
5.0
5.2
5.4
5.6
V
– Supply Voltage
CC
SW00895
Figure 1.
V
OH
values (V = V
)
CC
in
6
2002 Sep 09
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
SO16: plastic small outline package; 16 leads; body width 3.9 mm
SOT109-1
7
2002 Sep 09
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm
SOT338-1
8
2002 Sep 09
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
SSOP16: plastic shrink small outline package; 16 leads;
body width 3.9 mm; lead pitch 0.635 mm
SOT519-1
9
2002 Sep 09
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm
SOT403-1
10
2002 Sep 09
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer
with level shifting
CBTD3257
Data sheet status
Product
status
Definitions
[1]
Data sheet status
[2]
Objective data
Development
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
Preliminary data
Product data
Qualification
Production
This data sheet contains data from the preliminary specification. Supplementary data will be
published at a later date. Philips Semiconductors reserves the right to change the specification
without notice, in order to improve the design and supply the best possible product.
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply.
Changes will be communicated according to the Customer Product/Process Change Notification
(CPCN) procedure SNW-SQ-650A.
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Koninklijke Philips Electronics N.V. 2002
Contact information
All rights reserved. Printed in U.S.A.
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
Date of release: 04-02
9397 750
For sales offices addresses send e-mail to:
sales.addresses@www.semiconductors.philips.com.
Document order number:
Philips
Semiconductors
相关型号:
CBTD3306D-T
IC CBT/FST/QS/5C/B SERIES, DUAL 1-BIT DRIVER, TRUE OUTPUT, PDSO8, 3.90 MM, PLASTIC, MS-012, SOT96-1, SOP-8, Bus Driver/Transceiver
NXP
©2020 ICPDF网 联系我们和版权申明