AV162731DGG-T [NXP]
IC ALVT SERIES, 7-BIT DRIVER, TRUE OUTPUT, PDSO56, Bus Driver/Transceiver;
| 型号： | AV162731DGG-T |
| 厂家： | 
NXP |
| 描述： | IC ALVT SERIES, 7-BIT DRIVER, TRUE OUTPUT, PDSO56, Bus Driver/Transceiver 驱动 信息通信管理 光电二极管 输出元件 逻辑集成电路 |
| 文件： | 总12页 (文件大小：105K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
74ALVT162731
2.5V/3.3V 1-to-4 address register/driver
with 30Ω termination resistors (3-State)
Product specification
IC24 Data Handbook
1999 Mar 23
Philips
Semiconductors
Philips Semiconductors
Product specification
2.5V/3.3V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
FEATURES
• 5V I/O Compatible
DESCRIPTION
The 74ALVT162731 is a high-performance BiCMOS product designed
for V operation at 2.5V to 3.3V with I/O compatibility up to 5V.
CC
• 3-State outputs
• Output capability: +12 mA/-12 mA
This device is a 1-to-4 address register/driver featuring non-inverting
3-State outputs. The state of the outputs are controlled by two
enable inputs (OE1 and OE2). Each enable input controls the state
of two of the four common outputs for each input. When an OEn
input is a logic High, the respective outputs will be in the high
impedance state. When an OEn input is a logic Low, the respective
outputs are active. The device can be configured for a transparent
mode from input to output or a register mode by the SEL input.
When SEL is a logic High the device is configured for transparent
mode and when SEL is a logic Low it is configured for register
mode. While in the register mode the output follows the input on the
rising edge of the CLK input. The function of the data registers is not
effected by either SEL or OEn.
• Bus hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs
• Live insertion/extraction permitted
• Power-up reset
• Power-up 3-State
• Positive edge triggered registers
• Latch-up protection exceeds 500 mA per JEDEC JC40.2 Std 17
• ESD protection exceeds 2000 V per MIL STD 883 Method 3015
and 200 V per machine model
The 74ALVT162731 is designed with 30Ω series resistance in both
• Outputs include series resistance of 30Ω making external
the HIGH and LOW states of the output.
termination resistors unnecessary
• Bus hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs
QUICK REFERENCE DATA
TYPICAL
CONDITIONS
= 25°C; GND = 0V
SYMBOL
PARAMETER
UNIT
T
amb
2.5V
3.3V
t
t
Propagation delay
nAx to nYx
PLH
PHL
C = 50pF
L
3.8
3.2
ns
C
Input capacitance
Output capacitance
Total supply current
V = 0V or V
CC
3
9
3
9
pF
pF
µA
IN
I
C
Outputs disabled; V = 0V or V
OUT
CCZ
O
CC
I
Outputs disabled
40
60
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE OUTSIDE NORTH AMERICA
NORTH AMERICA
AV162731 DL
DWG NUMBER
SOT371-1
56-Pin Plastic SSOP Type III
56-Pin Plastic TSSOP Type II
–40°C to +85°C
–40°C to +85°C
74ALVT162731 DL
74ALVT162731 DGG
AV162731 DGG
SOT364-1
PIN DESCRIPTION
PIN NUMBER
SYMBOL
NAME AND FUNCTION
1, 4, 19, 25, 28, 32, 38, 41, 47, 53
GND
Ground
5, 6, 23, 24, 30, 31, 36, 37, 42, 43,
48, 49, 54, 55
1Y , 2Y
Output, controlled by OE1
n
n
2, 3, 20, 21, 26, 27, 33, 34, 39, 40,
45, 46, 51, 52
3Y ,4Y
n n
Output, controlled by OE2
7, 22, 29, 35, 44, 50, 56
V
Positive power supply
Data inputs
CC
8, 9, 10, 15, 16, 17, 18
A
n
14
SEL
CLK
Select input, controls mode of device
Clock input
11
12, 13
OE
Output enable
n
2
1999 Mar 23
853-2146 21078
Philips Semiconductors
Product specification
2.5V/3.3V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
PIN CONFIGURATION
FUNCTION TABLE
INPUTS
OUTPUTS
OE
H
L
SEL
X
CLK
X
A
X
L
Y
Z
L
GND
1
2
56
V
CC
4Y
1
55
54
53
52
1Y
2Y
2
2
H
X
3Y
3
1
L
H
X
H
L
H
L
GND
4
GND
L
L
↑
2Y
5
3Y
1
1
2
2
L
L
↑
H
H
1Y
V
6
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
4Y
V
7
CC
CC
SCHEMATIC OF EACH OUTPUT
A
A
A
8
1Y
1
2
3
3
3
9
2Y
V
CC
10
GND
V
CC
CLK 11
OE1 12
OE2 13
SEL 14
3Y
4Y
3
3
V
CC
1Y
2Y
4
4
27Ω
27Ω
A
4
A
5
A
6
A
7
15
16
17
18
OUTPUT
GND
3Y
4Y
4
4
GND 19
GND
4Y
20
21
22
23
24
1Y
7
7
5
5
3Y
V
2Y
V
SW00007
CC
CC
2Y
3Y
7
7
5
5
1Y
4Y
GND 25
GND
4Y
26
27
1Y
2Y
6
6
6
3Y
6
GND 28
V
cc
SV01733
LOGIC DIAGRAM
OE1
OE2
1Y1
2Y1
3Y1
CLK
A1
CLK
4Y1
SEL
To six other channels
SV01734
3
1999 Mar 23
Philips Semiconductors
Product specification
2.5V/3.3V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
1, 2
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
CONDITIONS
RATING
-0.5 to +4.6
-50
UNIT
V
V
CC
I
IK
DC supply voltage
DC input diode current
V < 0
I
mA
V
3
V
I
DC input voltage
-0.5 to +7.0
-50
I
DC output diode current
V
O
< 0
mA
V
OK
3
V
OUT
DC output voltage
Output in Off or High state
Output in Low state
-0.5 to +7.0
128
I
DC output current
mA
OUT
Output in High state
-64
T
stg
Storage temperature range
-65 to +150
°C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
2.5V RANGE LIMITS 3.3V RANGE LIMITS
SYMBOL
PARAMETER
UNIT
MIN
2.3
0
MAX
2.7
MIN
3.0
0
MAX
3.6
V
CC
DC supply voltage
Input voltage
V
V
V
I
5.5
5.5
V
High-level input voltage
Input voltage
1.7
2.0
V
IH
V
0.7
–8
8
0.8
–12
12
V
IL
I
High-level output current
Low-level output current
mA
mA
ns/V
°C
OH
I
OL
∆τ/∆ϖ
Input transition rise or fall rate; Outputs enabled
Operating free-air temperature range
10
+85
10
T
amb
–40
–40
+85
4
1999 Mar 23
Philips Semiconductors
Product specification
2.5V/3.3V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
DC ELECTRICAL CHARACTERISTICS (3.3V "0.3V RANGE)
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Temp = -40°C to +85°C
UNIT
1
MIN
TYP
–0.85
2.5
MAX
V
Input clamp voltage
V
V
= 3.0V; I = –18mA
–1.2
V
V
IK
CC
IK
V
OH
High-level output voltage
= 3.0V; I = –12mA
2.0
CC
OH
V
Low–level output voltage
V
= 3.0V; I = 12mA
0.5
0.8
V
V
OL
CC
OL
6
V
RST
Power-up output low voltage
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 3.6V; I = 1mA; V = V or GND
0.55
±1
O
I
CC
= 3.6V; V = V or GND
Control pins
0.1
0.1
I
CC
= 0 or 3.6V; V = 5.5V
10
I
I
Input leakage current
µA
I
= 3.6V; V = V
0.5
1
I
CC
4
Data pins
= 3.6V; V = 0
0.1
-5
I
I
Off current
= 0V; V or V = 0 to 4.5V
0.1
±100
µA
µA
OFF
I
O
= 3V; V = 0.8V
75
130
–140
I
Bus Hold current
= 3V; V = 2.0V
–75
I
I
HOLD
7
Data inputs
= 0V to 3.6V; V = 3.6V
±500
CC
Current into an output in the
I
V
= 5.5V; V = 3.0V
10
1
125
µA
µA
EX
O
CC
High state when V > V
O
CC
Power up/down 3-State output
V
CC
≤ 1.2V; V = 0.5V to V ; V = GND or V
O CC I CC
I
±100
PU/PD
3
current
OE/OE = Don’t care
I
3-State output High current
3-State output Low current
V
V
V
V
V
V
= 3.6V; V = 3.0V; V = V or V
0.5
0.5
5
µA
µA
OZH
CC
CC
CC
CC
CC
CC
O
I
IL
IH
IH
I
= 3.6V; V = 0.5V; V = V or V
–5
OZL
O
I
IL
I
I
= 3.6V; Outputs High, V = GND or V I
= 0
= 0
0.05
7.0
0.1
9.0
0.1
CCH
I
CC, O
I
Quiescent supply current
= 3.6V; Outputs Low, V = GND or V I
CC, O
mA
mA
CCL
CCZ
I
5
= 3.6V; Outputs Disabled; V = GND or V
I =0
CC, O
0.06
I
Additional supply current per
= 3V to 3.6V; One input at V –0.6V,
CC
∆I
0.04
0.4
CC
2
input pin
Other inputs at V or GND
CC
NOTES:
1. All typical values are at V = 3.3V and T
= 25°C.
amb
CC
2. This is the increase in supply current for each input at the specified voltage level other than V or GND
CC
3. This parameter is valid for any V between 0V and 1.2V with a transition time of up to 10msec. From V = 1.2V to V = 3.3V ± 0.3V a
CC
CC
CC
transition time of 100µsec is permitted. This parameter is valid for T
= 25°C only.
amb
4. Unused pins at V or GND.
CC
5. I
is measured with outputs pulled up to V or pulled down to ground.
CCZ
CC
6. For valid test results, data must not be loaded into the flip-flops (or latches) after applying power.
7. This is the bus hold overdrive current required to force the input to the opposite logic state.
5
1999 Mar 23
Philips Semiconductors
Product specification
2.5V/3.3V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
AC CHARACTERISTICS (3.3V "0.3V RANGE)
GND = 0V; t = t = 2.5ns; C = 50pF; R = 500Ω; T
= –40°C to +85°C.
R
F
L
L
amb
LIMITS
SYMBOL
PARAMETER
WAVEFORM
UNIT
V
CC
= 3.3V "0.3V
1
MIN
TYP
MAX
t
t
Propagation delay
nAx to nYx
1.0
1.0
3.2
2.7
5.0
4.0
PLH
PHL
1
3
1
2
2
ns
ns
ns
ns
ns
t
t
Propagation delay
CLK to nYx
1.5
1.5
4.0
3.8
6.3
5.4
PLH
PHL
t
t
Propagation delay
SEL to nYx
1.5
1.5
4.3
3.7
6.2
5.6
PLH
PHL
t
Output enable time
to High and Low level
1.0
1.0
4.2
3.4
7.0
4.9
PZH
t
PZL
t
Output disable time
from High and Low Level
1.5
1.5
3.9
3.2
6.0
4.9
PHZ
t
PLZ
NOTE:
1. All typical values are at V = 3.3V and T
= 25°C.
CC
amb
AC SETUP REQUIREMENTS (3.3V "0.3V RANGE)
GND = 0V; t = t = 2.5ns; C = 50pF, R = 500Ω; T
= –40°C to +85°C.
R
F
L
L
amb
LIMITS
SYMBOL
PARAMETER
WAVEFORM
V
CC
= 3.3V ±0.3V
UNIT
1
MIN
TYP
ts(H)
ts(L)
Setup time, High or Low
Ax to nYx
1.5
1.5
1.1
0.6
4
4
3
ns
ns
ns
th(H)
th(L)
Hold time, High or Low
Ax to nYx
0
0
–0.5
–0.9
tw(H)
tw(L)
Pulse width, High or Low
CLK
1.5
1.5
NOTE:
1. All typical values are at V = 3.3V and T
= 25°C.
amb
CC
6
1999 Mar 23
Philips Semiconductors
Product specification
2.5V/3.3V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
DC ELECTRICAL CHARACTERISTICS (2.5V "0.2V RANGE)
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Temp = -40°C to +85°C
UNIT
1
MIN
TYP
–0.85
2.1
MAX
V
Input clamp voltage
V
V
= 2.3V; I = –18mA
–1.2
V
V
IK
CC
IK
V
OH
High-level output voltage
= 2.3V; I = –8mA
1.7
CC
OH
V
Low-level output voltage
V
= 2.3V; I = 12mA
0.5
0.7
V
V
OL
CC
OL
7
V
RST
Power-up output low voltage
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 2.7V; I = 1mA; V = V or GND
0.55
±1
O
I
CC
= 2.7V; V = V
or GND
CC
Control pins
0.1
0.1
0.1
0.1
0.1
90
I
= 0 or 2.7V; V = 5.5V
10
I
I
Input leakage current
µA
I
= 2.7V; V = V
1
I
CC
4
Data pins
= 2.7V; V = 0
-5
I
I
Off current
= 0V; V or V = 0 to 4.5V
µA
µA
"100
OFF
I
O
Bus Hold current
= 2.3V; V = 0.7V
I
I
HOLD
6
Data inputs
= 2.3V; V = 1.7V
–10
I
Current into an output in the
I
V
= 5.5V; V = 2.3V
10
1
125
µA
µA
EX
O
CC
High state when V > V
O
CC
Power up/down 3-State output
V
CC
≤ 1.2V; V = 0.5V to V ; V = GND or V
O CC I CC
I
"100
PU/PD
3
current
OE/OE = Don’t care
I
3-State output High current
3-State output Low current
V
V
V
V
V
V
= 2.7V; V = 2.3V; V = V or V
0.5
0.5
5
µA
µA
OZH
CC
CC
CC
CC
CC
CC
O
I
IL
IH
IH
I
= 2.7V; V = 0.5V; V = V or V
–5
OZL
O
I
IL
I
= 2.7V; Outputs High, V = GND or V I 0
CC, O =
0.04
5.0
0.1
7.0
0.1
CCH
I
I
Quiescent supply current
= 2.7V; Outputs Low, V = GND or V I 0
CC, O =
mA
mA
CCL
CCZ
I
5
I
= 2.7V; Outputs Disabled; V = GND or V
I 0
CC, O =
0.04
I
Additional supply current per
= 2.3V to 2.7V; One input at V –0.6V,
CC
∆I
0.04
0.4
CC
2
input pin
Other inputs at V or GND
CC
NOTES:
1. All typical values are at V = 2.5V and T
= 25°C.
amb
CC
2. This is the increase in supply current for each input at the specified voltage level other than V or GND
CC
3. This parameter is valid for any V between 0V and 1.2V with a transition time of up to 10msec. From V = 1.2V to V = 2.5V ± 0.2V a
CC
CC
CC
transition time of 100µsec is permitted. This parameter is valid for T
= 25°C only.
amb
4. Unused pins at V or GND.
CC
5. I
is measured with outputs pulled up to V or pulled down to ground.
CCZ
CC
6. Not guaranteed.
7. For valid test results, data must not be loaded into the flip-flops (or latches) after applying power.
AC CHARACTERISTICS (2.5V "0.2V RANGE)
GND = 0V; t = t = 2.5ns; C = 50pF; R = 500Ω; T
= –40°C to +85°C.
R
F
L
L
amb
LIMITS
SYMBOL
PARAMETER
WAVEFORM
UNIT
V
CC
= 2.5V "0.2V
1
MIN
TYP
MAX
t
t
Propagation delay
nAx to nYx
1.0
1.0
3.8
3.1
5.7
4.5
PLH
PHL
1
3
1
2
2
ns
ns
ns
ns
ns
t
t
Propagation delay
CLK to nYx
2.2
2.2
4.8
4.1
7.3
6.2
PLH
PHL
t
t
Propagation delay
SEL to nYx
2.0
2.0
5.5
3.9
8.7
6.0
PLH
PHL
t
Output enable time
to High and Low level
2.0
2.0
5.8
4.1
9.0
6.1
PZH
t
PZL
t
Output disable time
from High and Low Level
1.5
1.5
5.0
4.1
7.6
6.3
PHZ
t
PLZ
NOTE:
1. All typical values are at V = 2.5V and T
= 25°C.
CC
amb
7
1999 Mar 23
Philips Semiconductors
Product specification
2.5V/3.3V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
AC SETUP REQUIREMENTS (2.5V "0.2V RANGE)
GND = 0V; t = t = 2.5ns; C = 50pF, R = 500Ω; T
= –40°C to +85°C.
R
F
L
L
amb
LIMITS
= 2.5V ±0.2V
V
CC
SYMBOL
PARAMETER
WAVEFORM
UNIT
1
MIN
TYP
ts(H)
ts(L)
Setup time, High or Low
nYx to CLK
2.4
2.3
1.4
0.9
4
4
3
ns
ns
ns
th(H)
th(L)
Hold time, High or Low
nYx to CLK
0
0
–0.7
–1.0
tw(H)
tw(L)
Pulse width, High or Low
CLK
1.5
1.5
NOTE:
1. All typical values are at V = 2.5V and T
= 25°C.
amb
CC
AC WAVEFORMS
NOTES:
1. V = 1.5V at V w 3.0V, V = V /2 at V v 2.7V
M
CC
M
CC
CC
2. V = V + 0.3V at V w 3.0V, V = V + 0.150V at V v 2.7V
X
OL
CC
X
OL
CC
3. V = V – 0.3V at V w 3.0V, V = V – 0.150V at V v 2.7V
Y
OH
CC
Y
OH
CC
1/f
MAX
3.0V or V
,
CC
whichever is
less
3.0V or V
whichever is
less
,
CC
SEL
nAx
CLK
0V
0V
t
t
PHL
PLH
t
(L)
t (H)
W
W
t
PLH
t
V
PHL
OH
V
OH
nYx
nYx
V
OL
V
OL
SW00276
SW00277
Waveform 1. Input (Ax) to Output (nYx) Propagation Delay,
transparent mode. SEL to OUtput (nYx) Propagation Delay
Waveform 3. Propagation Delay, Clock Input to Output, Clock
Pulse Width, and Maximum Clock Frequency
3.0V or V
whichever is
less
CC
3.0V or V
whichever is
less
,
CC
nOE
INPUT
V
V
M
t
M
t
Ax
0V
0V
PZL
PLZ
t (H)
S
t (H)
h
t (L)
h
t (L)
S
V
V
3.0V or V
whichever is
less
,
nYx
OUTPUT
M
M
CC
V
V
X
CLK
OL
t
t
PHZ
PZH
V
OH
0V
V
Y
SW00278
nYx
OUTPUT
Waveform 4. Data setup and hold times
0V
SW00204
Waveform 2. 3-State Output Enable and Disable Times
8
1999 Mar 23
Philips Semiconductors
Product specification
2.5V/3.3V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
TEST CIRCUIT AND WAVEFORMS
6.0V or V x 2
CC
V
V
t
W
IN
CC
90%
90%
Open
GND
NEGATIVE
PULSE
V
V
M
10%
M
10%
V
V
OUT
IN
R
R
L
0V
PULSE
GENERATOR
D.U.T.
t
t
(t
(t
)
t
t
(t
)
THL
F
TLH
R
R
T
)
(t
)
C
L
TLH
R
THL
F
V
L
IN
90%
M
90%
POSITIVE
PULSE
V
V
M
Test Circuit for 3-State Outputs
10%
10%
t
W
0V
SWITCH POSITION
TEST
SWITCH
6V or V
Open
t
t
PLZ/ PZL
CC x 2
t
t
PLH/ PHL
t
/t
GND
PHZ PZH
INPUT PULSE REQUIREMENTS
FAMILY
DEFINITIONS
Amplitude
3.0V or V
whichever
is less
Rep. Rate
t
t
t
F
W
R
R = Load resistor; see AC CHARACTERISTICS for value.
L
CC
C = Load capacitance includes jig and probe capacitance:
L
74ALVT16
500ns
v10MHz
v2.5ns v2.5ns
See AC CHARACTERISTICS for value.
R = Termination resistance should be equal to Z
T
of
OUT
pulse generators.
SW00025
9
1999 Mar 23
Philips Semiconductors
Product specification
2.5 V/3.3 V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
SSOP56: plastic shrink small outline package; 56 leads; body width 7.5 mm
SOT371-1
10
1999 Mar 30
Philips Semiconductors
Product specification
2.5 V/3.3 V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
TSSOP56: plastic thin shrink small outline package; 56 leads; body width 6.1mm
SOT364-1
11
1999 Mar 30
Philips Semiconductors
Product specification
2.5 V/3.3 V 1-to-4 address register/driver with 30Ω
termination resistors (3-State)
74ALVT162731
Data sheet status
[1]
Data sheet
status
Product
status
Definition
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Date of release: 05-96
9397-750-05541
Document order number:
Philips
Semiconductors
相关型号：
AV162821DGG
2.5V/3.3V 20-bit bus-interface D-type flip-flop; positive-edge trigger with 30ohm termination resistors 3-State
NXP
AV162821DL
2.5V/3.3V 20-bit bus-interface D-type flip-flop; positive-edge trigger with 30ohm termination resistors 3-State
NXP
©2020 ICPDF网 联系我们和版权申明