UPD17071 [NEC]
4-BIT SINGLE-CHIP MICROCONTROLLER WITH PLL FREQUENCY SYNTHESIZER CONTROLLER FOR PORTABLE FM/AM RADIO AND TV; 与PLL频率合成器控制器,用于便携式FM / AM广播电视大学4位单片微控制器型号: | UPD17071 |
厂家: | NEC |
描述: | 4-BIT SINGLE-CHIP MICROCONTROLLER WITH PLL FREQUENCY SYNTHESIZER CONTROLLER FOR PORTABLE FM/AM RADIO AND TV |
文件: | 总48页 (文件大小:294K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY DATA SHEET
MOS INTEGRATED CIRCUIT
µPD17071GB-012
4-BIT SINGLE-CHIP MICROCONTROLLER WITH PLL FREQUENCY
SYNTHESIZER CONTROLLER FOR PORTABLE FM/AM RADIO AND TV
DESCRIPTION
The µPD17071GB-012 is a CMOS microcontroller with an on-chip PLL frequency synthesizer for receiving
international FM and AM and Japanese TV broadcasting.
In addition, because it includes a prescaler (230 MHz MAX.), IF counter, and LCD controller/driver, it constitutes
a high-performance, multi-function FM, AM, or TV tuner on a single chip.
Housed in a 56-pin QFP and driven by two dry cells at a low voltage (VDD = 1.8 to 3.6 V), the µPD17071GB-012
is ideal for creating a compact portable clock radio and radio cassette recorder.
FEATURES
Preset memory
Watch function
•
•
•
•
Three bands: FM, AM, and Japanese TV (1 to 12
channels)
12-hour or 24-hour indication
Alarm function
10 stations for each band, totaling 30 stations
Last channel memory
Outputs alarm sound at set time every day
Sleep timer function
•
•
One station for each band, totaling 3 stations
Tuning function
Turns off radio after set time
(Time can be set in a range of 30 to 120 minutes in
units of 30 minutes.)
•
•
•
Manual seek/auto seek
Auto store memory
Preset memory call
Low-voltage operation
•
VDD = 1.8 to 3.6 V
LCD controller/driver
•
(1/4 duty, 1/2 bias, 3.1-V driven, frame frequency:
62.5 Hz)
ORDERING INFORMATION
Part Number
Package
µPD17071GB-012-1A7
56-pin plastic QFP (10 × 10 mm, 0.65 mm pitch)
The information in this document is subject to change without notice.
Document No. U12320EJ1V0DS00 (1st edition)
Date Published July 1997 N
Printed in Japan
1997
©
µPD17071GB-012
FUNCTIONAL OUTLINE
Receive frequency, channel space, reference frequency, intermediate frequency, station detection mode
(1/2)
Region
Japan
Band
FM
Receive Frequency
76.0 to 90.0 MHz
76.0 to 108.0 MHz
522 to 1629 kHz
Channel Space
100 kHz
Reference
Frequency
Intermediate
Frequency
Station
Detection Mode
IF only
25 kHz
–10.71 MHz
IF and SD
IF only
100 kHz
9 kHz
25 kHz
3 kHz
–10.71 MHz
450 kHz
IF and SD
IF only
AM
IF and SD
IF only
459 kHz
IF and SD
IF only
10.71 MHz
–10.71 MHz
10.71 MHz
10.71 MHz
450 kHz
IF and SD
IF only
TV
1 to 12 ch
—
25 kHz
25 kHz
25 kHz
5 kHz
IF and SD
IF only
U.S.A.
FM
87.5 to 107.9 MHz
200 kHz
100 kHz
10 kHz
IF and SD
IF only
IF and SD
IF only
AM
530 to 1710 kHz
IF and SD
IF only
460 kHz
IF and SD
IF only
10.71 MHz
10.71 MHz
10.71 MHz
450 kHz
IF and SD
IF only
China
FM
AM
87.0 to 108.0 MHz
522 to 1611 kHz
100 kHz
50 kHz
9 kHz
25 kHz
25 kHz
3 kHz
IF and SD
IF only
IF and SD
IF only
IF and SD
IF only
10.71 MHz
10.71 MHz
IF and SD
IF only
Europe 1
FM
AM
87.5 to 108.0 MHz
530 to 1620 kHz
50 kHz
10 kHz
25 kHz
5 kHz
IF and SD
IF only
450 kHz
459 kHz
10.71 MHz
450 kHz
IF only
IF only
522 to 1629 kHz
9 kHz
3 kHz
IF only
IF and SD
IF only
459 kHz
IF and SD
IF only
10.71 MHz
10.71 MHz
IF and SD
IF only
Europe 2
FM
AM
87.5 to 108.0 MHz
530 to 1620 kHz
50 kHz
10 kHz
25 kHz
5 kHz
IF and SD
IF only
450 kHz
459 kHz
10.71 MHz
450 kHz
IF only
IF only
522 to 1629 kHz
9 kHz
3 kHz
IF only
IF and SD
IF only
459 kHz
IF and SD
IF only
10.71 MHz
IF and SD
Remark The initial values in the preset memory differ between “Europe 1” and “Europe 2”.
2
µPD17071GB-012
(2/2)
Setting of Pin Input
AREA0 AREA1
Setting of Initialization Diode Switch
9k/10k
SD
Japan Wide
100k/200k
CHINA BAND
IFSEL0
IFSEL1
SD_IF
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
L
L
L
L
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Don’t care
Don’t care
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
0
0
0
1
0
1
0
1
0
1
0
0
0
0
1
0
1
0
1
L
L
L
Don’t care
Don’t care
L
L
H
Don’t care
Don’t care
L
L
H
Don’t care
Don’t care
L
L
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
L
0
0
L
L
0
0
L
L
1
0
L
L
1
0
L
L
0
1
L
L
0
1
L
L
Don’t care
Don’t care
L
L
Don’t care
Don’t care
L
H
Don’t care
Don’t care
L
H
L
Don’t care
Don’t care
L
H
H
Don’t care
Don’t care
L
H
H
Don’t care
Don’t care
L
H
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
L
0
0
L
H
0
0
L
H
1
0
L
H
1
0
L
H
0
1
L
H
0
1
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
L
Don’t care
Don’t care
Don’t care
Don’t care
H
Don’t care
Don’t care
Don’t care
Don’t care
H
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
Don’t care
0
0
Don’t care
Don’t care
0
0
Don’t care
Don’t care
0
1
Don’t care
Don’t care
0
1
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
L
Don’t care
Don’t care
L
Don’t care
Don’t care
L
0
0
L
L
1
0
L
L
0
1
H
L
0
0
Don’t care
H
L
0
0
L
1
0
Don’t care
H
L
1
0
L
0
1
Don’t care
Don’t care
Don’t care
L
L
0
1
H
H
H
H
H
H
H
H
H
H
H
Don’t care
Don’t care
Don’t care
Don’t care
0
1
0
0
0
1
1
0
0
0
0
1
0
0
0
0
1
1
L
L
H
Don’t care
H
Don’t care
H
Don’t care
Remarks 1. H: High-level input, L: Low-level input
2. 0: Open, 1: Short
3
µPD17071GB-012
INITIAL VALUE OF PRESET MEMORY
The contents of the preset memory on first power application differ depending on the destination region, as follows:
Destination
Band
Preset Memory
Last
(MHz) 77.5
(MHz) 76.0
M1
77.5
76.0
603
1 ch
87.5
87.5
530
87.0
522
87.5
522
530
87.5
522
530
M2
80.0
90.0
810
3 ch
90.0
90.1
600
87.0
522
90.0
603
600
90.1
603
600
M3
82.5
98.0
999
M4
85.0
M5
M6
76.0
M7
90.0
90.0
522
M8
76.0
76.0
522
1 ch
87.5
87.5
530
87.0
522
87.5
522
530
87.5
522
530
M9
76.0
76.0
522
1 ch
87.5
87.5
530
87.0
522
87.5
522
530
87.5
522
530
M10
76.0
76.0
522
Japan
FM
87.5
FM wide
AM
106.0 108.0 76.0
1440 1620 522
(kHz)
603
TV
(ch) 1 ch
4 ch
98.0
98.1
8 ch
12 ch 1 ch
1 ch
87.5
87.5
1 ch
87.5
87.5
530
U.S.A.
FM100 k (MHz) 87.5
FM200 k (MHz) 87.5
106.0 108.0 87.5
106.1 107.9 87.5
AM
(kHz)
(MHz) 87.0
(kHz) 522
(MHz) 87.5
530
1000 1200 1440 1710 530
China
FM
87.0
522
98.0
999
87.0
522
87.0
522
87.0
522
87.0
522
87.5
522
530
87.5
522
530
87.0
522
AM
Europe 1
FM
106.0 108.0 87.5
1440 1602 522
87.5
522
AM9 k
AM10 k
FM
(kHz)
(kHz)
522
530
1000 1400 1610 530
530
Europe 2
(MHz) 87.5
98.1
999
106.1 108.0 87.5
1440 1602 522
87.5
522
AM9 k
AM10 k
(kHz)
(kHz)
522
530
1000 1400 1610 530
530
Remark The initial values in the preset memory differ between “Europe 1” and “Europe 2”.
4
µPD17071GB-012
Tuning Function
(1) Manual tuning
Type
Description
Manual up
Increments or decrements frequency one step each time the corresponding key is pressed.
Manual down
(2) Auto tuning
Type
Description
Seek up
Searches station in up or down direction and, when station has been found, holds frequency of station.
Seek down
(3) Preset memory
Stores 10 stations for each band (FM, AM, and TV) by using 10 buttons, totaling 30 stations.
(4) Preset memory call
Receives the frequency written to the preset memory.
(5) Auto store memory
Searches all the frequencies in the received band, and automatically writes the frequencies of stations to the
preset memory.
(6) Last channel memory
Stores the frequency of the station received last in each of the three bands (FM, AM, and TV), totaling three
stations.
5
µPD17071GB-012
WATCH FUNCTION
(1) 12-hour (with “AM” and “PM” indication) or 24-hour indication
The time indication mode is automatically selected according to the selected destination region.
(2) Time on power application
On power application, the time is set to “00:00” (midnight) and counting is started.
TIMER FUNCTION
(1) Alarm function
Outputs an alarm sound at set time every day.
(2) Sleep timer
Automatically turns off radio after 30 to 120 minutes (the time can be set in units of 30 minutes).
OTHERS
(1) Outputs beep sound to confirm valid momentary key input.
(2) Watch/frequency (mode) indication selection
(3) Mute control output
(4) Key lock function
6
µPD17071GB-012
PIN CONFIGURATION (Top View)
56-pin plastic QFP (10 × 10 mm, 0.65-mm pitch)
µPD17071GB-012-1A7
56 55 54 53 52 51 50 49 48 47 46 45 44 43
42
MUTE (P1C0)
BAND1 (P0A0)
BAND2 (P0A1)
KS1 (P0A2)
KS2 (P0A3)
KS3 (P1B0)
KS4 (P1B1)
KS5 (P1B2)
KS6 (P1B3)
K0 (P1A0)
1
LCD7
LCD6
LCD5
LCD4
LCD3
LCD2
LCD1
LCD0
COM3
COM2
COM1
COM0
REGLCD
2
41
40
39
38
37
36
35
34
33
32
31
30
29
3
4
5
6
7
8
9
10
11
12
13
14
K1 (P1A1)
K2 (P1A2)
K3 (P1A3)
1
KEYLOCK (P0C0)
CAPLCD1
15 16 17 18 19 20 21 22 23 24 25 26 27 28
Remark ( ): Pins for µPD17071GB-XXX-1A7
7
µPD17071GB-012
TABLE OF CONTENTS
1. PIN FUNCTION ....................................................................................................................................9
2. CONFIGURATION OF KEY MATRIX ................................................................................................15
2.1 Layout of Initialization Diode Key Matrix .............................................................................15
2.2 Layout of Momentary Key Matrix...........................................................................................15
2.3 Connection of Key Matrix .......................................................................................................16
2.4 Description of Key Matrix .......................................................................................................17
2.4.1 Initialization diode matrix............................................................................................................ 17
2.4.2 Momentary key ............................................................................................................................. 20
2.5 Alarm Function .........................................................................................................................28
2.6 Key Lock Function ...................................................................................................................29
3. LCD DISPLAY ....................................................................................................................................30
3.1 LCD Panel..................................................................................................................................30
3.2 Font ............................................................................................................................................30
3.3 LCD Pattern...............................................................................................................................30
3.4 LCD Pin Assignment................................................................................................................31
3.5 Display Description .................................................................................................................33
3.6 Display Example.......................................................................................................................34
4. MUTE OUTPUT TIMING CHART ......................................................................................................36
4.1 Manual up/down (operates by pressing key and releasing within 0.5 sec) ....................36
4.2 Auto up/down (operates by holding down key for 0.5 sec or longer) .............................36
4.3 Calling Preset Memory ............................................................................................................37
4.4 Band Selection .........................................................................................................................37
4.5 CE Pin ........................................................................................................................................37
4.5.1 High level to low level ................................................................................................................. 37
4.5.2 Low level to high level................................................................................................................. 37
4.6 Sleep Timer ...............................................................................................................................38
5. ELECTRICAL SPECIFICATIONS (PRELIMINARY) .........................................................................39
6. PACKAGE...........................................................................................................................................42
8
µPD17071GB-012
1. PIN FUNCTION
Pin No.
1
Symbol
MUTE
Pin Name
Description
Outputs a mute control signal.
I/O Form
Mute output
CMOS
push-pull
output
Outputs a high level in the following cases:
• When radio is turned ON/OFF
• When the frequency band is changed
• During manual tuning
• During auto tuning
• When the preset memory is called
• In power-off state
2
3
BAND1
BAND2
Band select
signal output
These pins output band select signals.
The output of each band is as follows:
CMOS
push-pull
output
Pin
BAND1
BAND2
Selected band
AM
0
1
0
0
FM
TV (1 to 3 ch)
TV (4 to 12 ch)
1
1
(0: Low level, 1: High level)
Key source output pins of a key matrix
4
|
KS1
|
Key source
output
CMOS
push-pull
output
9
KS6
10
|
K0
|
Key return signal These pins input the key return signals of a key matrix. They are
Input
input
connected to an internal pull-down resistor.
13
K3
14
KEYLOCK Key lock signal
input
This pin inputs a key lock signal.
Input
The signal input to this pin is used to lock or unlock a momentary key.
Input a signal to this pin as follows:
• High level: To lock the momentary key.
All momentary keys are invalid while the keys are locked.
• Low level: To unlock the keys.
Note, however, that a high level or low level of less than 32 ms is
invalid.
15
STEREO
Stereo signal
input
This pin inputs a stereo signal.
Input
Reception of stereo broadcasting is identified by the signal input to
this pin.
Input a low level to this pin while stereo broadcasting is being
received.
9
µPD17071GB-012
Pin No.
16
Symbol
Pin Name
Description
I/O Form
Input
9 k/10 k
/SD
AM setting input/ This pin inputs an SD (Station Detector) signal.
SD signal input
When “Europe 1” or “Europe 2” is selected as the destination region,
this pin can be also used to input setting of a channel space in an
AM band.
(1) Setting of channel space in AM band for “Europe 1” and
“Europe 2” (9 k/10k)
This setting is valid only when “Europe 1” or “Europe 2” is selected
as the destination region.
The setting is read only on power application (power-ON reset), or
when the signal input to the CE pin (pin 50) goes high (CE reset);
otherwise, it is ignored.
Input a signal to this pin as follows:
• High level: Channel space 9 kHz
• Low level: Channel space 10 kHz
Note that the setting of this pin is invalid when initialization diode
switch SD_IF = 1, and the channel space is 9 kHz.
(2) Input of SD signal (SD)
When a station has been detected this is identified by the signal
input to this pin and the frequency counter when initialization diode
switch SD_IF = 1.
Input a high level to this pin when a station is detected.
However, a signal input for less than 32 ms is invalid.
17
FMIFC
FM/AM
This pin inputs an intermediate frequency (IF) in an FM or AM band.
The signal input to this pin is used to identify a station.
When initialization diode switch SD_IF = 1, however, the signal input to
this pin and the signal input to the SD pin (pin 16) are used to identify
a station.
Input
/AMIFC
intermediate
frequency input
The range of the input frequency in which detection of a station is
identified is as follows:
Band
FM
Input frequency range <1> Input frequency range <2>
10.7 MHz ± 20 kHz
AM
TV
450 kHz ± 1 kHz
459/460 kHz ± 1 kHz
10.7 MHz ± 20 kHz
The conditions of input frequency ranges <1> and <2> vary as follows
depending on the setting of initialization diodes IFSEL1 and IFSEL2.
IFSEL1
IFSEL2
Selected frequency range
Input frequency range <1>
Input frequency range <2>
Input frequency range <1>
0
1
0
0
0
1
(0: Open, 1: Short)
18
GND
Ground
Ground pin
10
µPD17071GB-012
Pin No.
19
Symbol
EO
Pin Name
Error out
Description
I/O Form
CMOS
This pin outputs PLL (Phase Locked Loop) errors.
It outputs the result of comparison between the frequency input to the
VCOH (pin 21) or VCOL (pin 20) and a set frequency.
• Input frequency > Set frequency: High level
• Input frequency < Set frequency: Low level
• Input frequency = Set frequency: Floating
Connect this pin to a varactor diode via an external LPF (lowpass
filter).
3-state
output
20
VCOL
AM local
This pin inputs local oscillation output (VCO output) in an AM band.
The signal that can be input to this pin is as follows:
Input
oscillation input
Selected intermediate
frequency
Frequency range
(MHz)
Minimum amplitude
(Vp-p)
10.71 MHz
5 to 50
0.3 to 8
0.2
0.2
Other than 10.71 MHz
Because an internal AC amplifier is provided, cut the DC component
of the input signal with a capacitor.
21
VCOH
FM local
This pin inputs local oscillation output (VCO output) in an FM and TV
band. The signal that can be input to this pin is as follows:
Input
oscillation input
Frequency range (MHz)
4 to 230
Minimum amplitude (Vp-p)
0.2
Because an internal AC amplifier is provided, cut the DC component
of the input signal with a capacitor.
22
REG0
Power supply pin This is a voltage regulator pin for PLL.
Connect this pin to GND via a 0.1-µF capacitor.
It outputs a low level when the radio is off.
—
REG0
0.1µF
23
VDD
Power supply pin This is a power supply pin.
—
It supplies a voltage of VDD = 1.8 to 3.6 V (TA = –20 to +70 °C) to
operate all the functions.
Do not apply a voltage higher than that applied to the VDD pin to any
pin other than the VDD pin.
24
25
XOUT
XIN
Crystal resonator These pins are used to connect a crystal resonator for system clock
oscillation.
CMOS
push-pull
Connect a 75-kHz crystal resonator across these pins.
The accuracy of the watch is affected only by the oscillation
frequency of the crystal resonator.
—
11
µPD17071GB-012
Pin No.
26
Symbol
REG1
Pin Name
Description
I/O Form
—
Power supply pin This pin is a voltage regulator pin for oscillation circuit.
Connect this pin to GND via a 0.1-µF capacitor.
REG1
0.1µF
27
28
29
30
REGLCD0
CAPLCD0
CAPLCD1
REGLCD1
LCD driving
power supply
pins
• REGLCD1 and REGLCD0
—
These pins supply the LCD driving voltage.
• CAPLCD1 and CAPLCD0
Connect a capacitor for a doubler circuit across these pins to create
an LCD driving voltage.
Connect the capacitor as shown below to create the doubler circuit.
µ
C1 = C2 = 0.1
C3 = 0.01
F
µ
F
C1
C3
C2
REGLCD
CAPLCD
CAPLCD
REGLCD
1
1
0
0
Caution The value of the LCD drive voltage changes if the values
ofC1,C2,andC3arechangedbecauseoftheconfiguration
of the doubler circuit.
31
|
COM0
|
LCD common
signal output
These pins output common signals to an LCD panel.
They output 60 dots on the LCD panel by creating a matrix with
LCD0 through LCD14 pins (pins 35 through 49).
CMOS
push-pull
output
34
COM3
35
|
LCD0
|
LCD segment
signal output
These pins outputs segment signals to an LCD panel.
They display 60 dots on the LCD panel by creating a matrix with
COM0 through COM3 pins (pins 31 through 34).
CMOS
push-pull
output
49
LCD14
50
CE
Chip enable
This input pins selects radio operation as follows:
Input
• High level
Turns ON the radio.
• Low level
Turns OFF the radio.
Note, however, that a high or low level of less than 200 µs is not
accepted.
51
NC
No connection
No connection. Externally pull down this pin.
—
12
µPD17071GB-012
Pin No.
52
Symbol
BEEP
Pin Name
Description
I/O Form
BEEP/ALARM
output
This pin outputs a key-ON confirmation sound (beep output) and
alarm sound.
CMOS
push-pull
output
(1) Beep output
A pulse of 1.5 kHz is output for about 40 ms in the following cases:
• When a valid key is input
• While time is adjusted up or down in high-speed mode
• During seek up/down
(2) Alarm sound output
When the time reaches the alarm time set, a 3 kHz pulse is
intermittently output approximately every 64 ms, five times after 1
second.
The alarm sound is output for 10 minutes from the start of output,
or until it is canceled.
53
54
AREA0
AREA1
Destination
region setting
input
These pins input setting for the destination region.
The setting of these pins is read only on application of VDD (power-
ON reset) or when the signal input to the CE pin goes high (CE
reset); otherwise, it is ignored.
Input
Input a signal to these pins as follows:
AREA0
AREA1
Destination region
Japan
0
0
1
1
0
1
0
1
U.S.A.
Europe 1
Europe 2
(0: Low level, 1: High level)
When initialization diode switch CHINA_BAND = 1, however, the
setting is invalid, and the destination region is China.
13
µPD17071GB-012
Pin No.
55
Symbol
Pin Name
Description
I/O Form
Japan Wide/ FM setting input
100 k/200 k
This pin inputs an FM receive frequency band and setting of a channel
space. The setting differs depending on the destination region.
The setting is read only on application of VDD (power-ON reset) or when
the CE pin (pin 50) goes high (CE reset); otherwise, it is ignored.
Input
(1) When the destination region is Japan (Japan Wide)
Sets an FM receive frequency band.
Input as follows:
• High-level input: 76.0 to 108.0 MHz
• Low-level input: 76.0 to 90.0 MHz
(2) When the destination region is the U.S.A. (100 k/200 k)
Sets the channel space of the FM band.
Input as follows:
• High-level input: 100-kHz step
• Low-level input: 200-kHz step
(3) When the destination region is China (100 k/200 k)
Sets the channel space of the FM band.
Input as follows:
• High-level input: 50-kHz step
• Low-level input: 100-kHz step
56
CLKENA
Watch function
selection input
This pin inputs the setting for whether the watch function is used or not.
The setting is read only on application of VDD (power-ON reset) or
when the CE pin (pin 50) goes high (CE reset); otherwise, it is ignored.
Input as follows:
Input
• High-level input: Watch function used.
• Low-level input: Watch function not used.
14
µPD17071GB-012
2. CONFIGURATION OF KEY MATRIX
2.1 Layout of Initialization Diode Key Matrix
Input Pin
(Pin No.)
K0 (10)
K1 (11)
K2 (12)
K3 (13)
Output Pin
(Pin No.)
KS1 (4)
—
CHINA_BAND
MEMSEL
TV_ENA
IFSEL1
STOPSEL
IFSEL2
KS2 (5)
SD_IF
Remark —: Not set
2.2 Layout of Momentary Key Matrix
Input Pin
(Pin No.)
K0 (10)
K1 (11)
K2 (12)
K3 (13)
Output Pin
(Pin No.)
KS3 (6)
KS4 (7)
KS5 (8)
KS6 (9)
SLEEP
AUTO STORE
MEMORY/AUTO STORE
MODE
CHECK
STOP
M5
BAND
+5
M4
M1/MEMORY UP
UP
M2
M3
DOWN
ALARM
15
µPD17071GB-012
2.3 Connection of Key Matrix
Momentary key
Kn
Initialization diode
Kn
Ksn
Ksn
Momentary key
Initialization diode
55
56
16
15
µ
PD17071GB-012
KS1 KS2 KS3 KS4 KS5 KS6 K0 K1 K2 K3
10 11 12 13 14
1
2
3
4
5
6
7
8
9
16
µPD17071GB-012
2.4 Description of Key Matrix
2.4.1 Initialization diode matrix
The initialization diode matrix determines the function of the µPD17071GB-012. Be sure to set this diode matrix.
The setting of the diode matrix is read only on application of VDD (power-ON reset), or when the CE pin (pin 50)
goes high (CE reset); otherwise, it is ignored.
(1) Switch setting destination region
CHINA_BAND
(2) Switch setting receivable band (valid only when the destination region is Japan)
TV_ENA
(3) Switches setting intermediate frequency of AM band
IFSEL1, IFSEL2
(4) Switch setting station detection identification method
SD_IF
(5) Switch setting momentary key for preset memory manipulation
MEMSEL
(6) Switch setting momentary key for alarm sound canceling operation
STOPSEL
To set these switches, short-circuit (1) or open (0) the corresponding switches on the matrix with a diode.
The function of the initialization diode matrix is explained next (in alphabetical order).
17
µPD17071GB-012
Initialization Diode
CHINA_BAND
Function Description
This switch selects the destination region of the application set.
Set this switch as follows:
CHINA_BAND
Destination region
0
1
Set by AREA0 and AREA1 pins
China
(0: Open, 1: Short)
If China is selected as the region by this switch, the setting of AREA0 (pin 53) and AREA1 (pin 54) is invalid.
IFSEL1
IFSEL2
This switch sets an intermediate frequency in the AM band.
Set it as follows:
IFSEL1
IFSEL2
Intermediate Frequency of AM Band
0
1
0
1
0
0
1
1
450 kHz
459 kHz/460 kHz
10.71 MHz
Invalid setting.
The intermediate frequency is 450 kHz.
(0: Open, 1: Short)
When inputting an intermediate frequency to the FMIFC/AMIFC pin (pin 17) when the intermediate
frequency is set to “10.71 kHz”, convert the frequency to 450 kHz before inputting.
MEMSEL
This switch sets the momentary key for preset memory manipulation.
Set it as follows:
MEMSEL
0
Preset memory selection operation
Auto store memory operation
AUTO STORE
M1
+5
M5
to
key
key
key
key
1
key (hold down for 2
MEMORY
seconds or longer)
MEMORY UP
(0: Open, 1: Short)
SD_IF
This switch selects the method for detecting a station.
Set it as follows:
SD_IF
Station detection method
Station detection using frequency counter
Station detection using frequency counter and SD signal
0
1
(0: Open, 1: Short)
STOPSEL
This switch sets a momentary key used to cancel alarm sound output.
It is also used to lock or unlock a key.
Set it as follows:
STOPSEL
0
Alarm sound output canceling operation
Key locking/unlocking
key
key and
(pressed simultaneously)
key
key
STOP
STOP
MODE
1
key
key and
ALARM
ALARM
MODE
(pressed simultaneously)
(0: Open, 1: Short)
18
µPD17071GB-012
Initialization Diode
TV_ENA
Function Description
This switch is used to select whether a TV band is received.
Setting of this switch is valid only when Japan is selected as the destination region.
Set it as follows:
TV_ENA
Receivable band when Japan is selected as region
0
1
FM/AM
FM/AM/TV
(0: Open, 1: Short)
19
µPD17071GB-012
2.4.2 Momentary key
Two momentary keys can be pressed simultaneously only in the following combination.
•
•
•
and
and
and
keys to lock or unlock keys
keys to lock or unlock keys
keys during seek up/down
STOP
ALARM
UP
MODE
MODE
DOWN
Any other combinations of keys is invalid when pressed simultaneously.
The chattering wait time is 48 to 64 ms.
The functions of the momentary keys are explained below (in alphabetical order).
20
µPD17071GB-012
Momentary Key
Function Description
This keys sets or cancels the alarm and cancels alarm sound output.
ALARM
This key is valid when the watch function is used (when a high level is input to the CLKENA pin (pin 56)).
•
When initialization diode switch STOPSEL = 0
For setting or canceling alarm
•
When initialization diode switch STOPSEL = 1
For setting or canceling alarm and canceling alarm sound output
(1) Setting/canceling alarm
By pressing the
When the
key, the alarm is set at specified time.
key is pressed again with the alarm set, the alarm is canceled.
ALARM
ALARM
While the time is being adjusted and while the alarm time is being set, however, the alarm cannot be
set or canceled.
For an explanation of how to set the alarm time, refer to the description on the
key.
MODE
(2) Canceling alarm sound output (when STOPSEL = 1)
By pressing the
be stopped.
key when the alarm sound is being output, the output of the alarm can
ALARM
(3) Locking momentary key (when STOPSEL = 1)
The momentary key is locked when the
held down.
key is pressed while the
key is
MODE
ALARM
For key locking, refer to the description on the
key.
MODE
This is a key for auto store memory.
AUTO STORE
It is valid when the radio is ON and the initialization diode switch MEMSEL = 0.
•
Auto store memory
The auto store memory operation is started when the
key is pressed.
AUTO STORE
This operation automatically searches a station and writes it to the preset memory.
During the auto store memory operation, the frequency being sought is displayed.
Searching is started from the lowest frequency in a band, and is completed when the highest frequency
is found.
When stations are found they are stored started from preset M1. When stations have been stored up
to M10, the auto store memory operation is completed. If the highest frequency is found before a station
is written to M10, the auto store memory operation is stopped at that point. The operation of each key
during auto store memory operation is as follows:
Key
Function Description
Stops auto store memory operation.
AUTO STORE
•
If station is written to preset memory as result of auto store memory
operation, preset M1 is received.
•
If no station is written to preset memory as result of auto store memory
operation, frequency or preset station, when auto store memory operation
is started, is received.
BAND
Stops auto store memory operation and changes band.
ALARM
CHECK
STOP
Performs operation of pressed key.
Auto store memory operation continues.
Any key other than above is invalid.
21
µPD17071GB-012
Momentary Key
Function Description
This key is used to select a band.
It is valid when the radio is ON.
BAND
Each time the
key has been pressed, the band is changed as follows:
BAND
• If Japan is selected as destination region and if initialization diode switch TV_ENA = 1
(On initial power application)
FM
AM
TV
•
Other than above
(On initial power application)
FM
AM
This key is used to test lighting of the LCD before shipment.
By pressing the key, all the segments of the LCD lights for 20 seconds.
If the key is pressed again while the LCD is lit, the test is stopped.
Any key other than the key is invalid during the testing of LCD lighting.
CHECK
CHECK
CHECK
CHECK
–
These keys are used to call a preset station and to write data to the preset memories.
They are valid when the radio is ON and initialization diode switch MEMSEL = 0.
M5
M1
(1) Calling preset memory
By pressing any of the
called.
through
keys, the corresponding preset station can be
M5
M1
A preset memory number is indicated for 0.5 second, and the corresponding frequency is selected.
Ten preset memories, M1 through M10, each corresponding to a preset station, are available.
To call preset memories M6 through M10, or to write data to these preset memories, refer to the
description of the
Key.
+5
(2) Writing preset memory
The contents of a specified preset memory are written when one of the keys
is pressed in combination with the key.
For how to write data to the preset memory, refer to the description of the
to
M1
M5
MEMORY
key.
MEMORY
When initialization diode switch MEMSEL = 1, the
key functions as the
Key.
MEMORY UP
M1
This key is for writing data to the preset memory and for auto store memory.
It is valid when the radio is ON.
MEMORY
•
When initialization diode switch MEMSEL = 0
For writing preset memory
•
When initialization diode switch MEMSEL = 1
For writing preset memory and auto store memory
The operation is as follows when initialization diode switch MEMSEL = 1.
key is held down for:
Less than 2 seconds
2 seconds or longer
Operation
MEMORY
Preset memory write
Auto store memory
22
µPD17071GB-012
Momentary Key
Function Description
(1) Preset memory writing
By pressing the
MEMORY
key, the preset memory is enabled to be written for 10 seconds.
Write data to the preset memory in the following sequence:
• When initialization diode switch MEMSEL = 0
MEMORY
Select the frequency to be stored to the memory
by using the
and
keys.
DOWN
UP
Press the
key
MEMORY
to enable the preset memory to be written.
Press any of the
through
keys
M1
M5
in accordance with the preset memory to
which data is to be written, and write data to the preset memory.
When initialization diode switch MEMSEL = 1
•
Select the frequency to be stored in the memory
by using the
and
key.
DOWN
UP
Enable the preset memory to be written
by pressing the key.
MEMORY
The preset memory holding the station received last plus one is
automatically selected as the preset memory to be written.
Select the preset memory to be written,
by using the
key.
MEMORY UP
Press the
key again
MEMORY
to write data to the preset memory.
23
µPD17071GB-012
Momentary Key
Function Description
The operation of each key is as follows depending on the write status of the preset memory.
MEMORY
Key
–
Function description
•
•
When initialization diode switch MEMSEL = 0
Data is written to a preset memory and the preset memory write
status is released.
M5
M1
When initialization diode switch MEMSEL = 1
This key is invalid.
MEMORY UP
•
•
When initialization diode switch MEMSEL = 0
This key is invalid.
When initialization diode switch MEMSEL = 1
Increments the preset memory to be written by one station. Preset
memory M1 is selected next if preset memory M10 is selected.
•
•
When initialization diode switch MEMSEL = 0
Releases the preset memory write status.
When initialization diode switch MEMSEL = 1
Writes data to a preset memory and releases the preset memory
write status.
MEMORY
Releases the preset memory write status, and performs the operation
of the key pressed.
AUTO STORE
BAND
/
UP
DOWN
Performs the operation of the key pressed.
The preset memory write status continues.
ALARM
CHECK
MODE
+5
STOP
SLEEP
(2) Auto store memory (when MEMSEL = 1)
The auto store memory operation is started by holding down the
longer.
key for 2 seconds or
key.
MEMORY
During auto store memory operation, this key operates as the
AUTO STORE
For the auto store memory operation, refer to the description on the
key.
AUTO STORE
24
µPD17071GB-012
Momentary Key
Function Description
This key is used to call and write a preset memory.
MEMORY UP
It is valid when the radio is ON and initialization diode switch MEMSEL = 1.
(1) Calling preset memory
Each time the
is is pressed, the preset station is incremented by one and called up.
MEMORY UP
The preset memory number is displayed for 0.5 second, and the corresponding frequency is received.
• When a preset station is already selected, the preset station is incremented by one and selected.
Example: When preset M3 is already selected, this is incremented by one and M4 is selected.
When preset M10 is the current selection, M1 is selected next.
• If this key is pressed while no preset station is selected, preset M1 is selected.
(2) Writing preset memory
Data is written to a specified preset memory when this key is used in combination with the
MEMORY
key.
For an explanation of how to write data to a preset memory, refer to the description of the
MEMORY
key. When initialization diode switch MEMSEL = 0, this key functions as the
This key is used to switch the display and the watch adjust mode.
key.
M1
MODE
It is valid when the watch function is used (when a high level is input to the CLKENA pin (pin 56)).,
• When radio is ON: For switching display
• When radio is OFF: For switching watch adjust mode
(1) Display switching (when radio is ON)
Each time the
key is pressed, the frequency display or watch display is alternately selected.
MODE
(2) Watch adjust mode switching (when radio is OFF)
Each time the key is pressed, the mode is changed as follows:
MODE
Watch display
Alarm time setting mode
Watch adjust mode
For an explanation of how to adjust the time, refer to the description of the
The momentary keys are locked by the following key operation:
and
keys.
DOWN
UP
• When STOPSEL = 0: Press the
• When STOPSEL = 1: Press the
key and then the
key and then the
key twice.
key twice.
STOP
MODE
MODE
ALARM
While keys are locked, no key operation other than that to manipulate key locking is valid.
By repeating the key locking operation while the keys are locked, the keys are unlocked.
If the momentary keys are locked by input to the KEYLOCK pin (pin 14), the keys cannot be unlocked by
a key operation.
25
µPD17071GB-012
Momentary Key
Function Description
This key is used to select preset memory M6 to M10 in combination with the
It is valid when the radio is ON and initialization diode switch MEMSEL = 0.
to
keys.
+5
M1
M5
When the
key is pressed, the preset shift status is set.
to key manipulates preset memory M6 to M10. The preset
+5
In this status, operating the
M1
M5
shift status is released on completion of the operation. If the
shift status, the preset shift status is released.
key is pressed again in the preset
+5
This key is used to set the sleep timer.
It is valid when the radio is ON.
SLEEP
When the
key is pressed, the remaining time of the sleep timer is displayed for 10 seconds.
SLEEP
The initial value of the remaining time of the sleep timer is 120 minutes.
If the key is pressed while the remaining time of the sleep timer is displayed, the time is
SLEEP
decremented in steps of 30 minutes.
(Example 60 minutes → 30 minutes, 45 minutes → 30 minutes)
If the remaining time reaches 0 minutes, the sleep timer is released.
If the radio is turned OFF (CE = low level) while the sleep timer is valid, the sleep timer is released.
This key is used to cancel output of the alarm sound.
STOP
It is valid when the watch function is used (when a high level is input to the CLKENA pin (pin 56)).
It is valid when initialization diode switch STOPSEL = 0.
(1) Stopping alarm sound output
By pressing the
stopped.
key while the alarm sound is output, output of the alarm sound can be
STOP
(2) Locking momentary keys (when STOPSEL = 0)
Momentary keys can be locked by pressing the
key and then the
key twice.
key.
MODE
STOP
For an explanation of how to lock the keys, refer to the description of the
MODE
This key is used to increment/decrement the receive frequency and adjust the time.
UP
DOWN
• When radio is ON: To increment/decrement receive frequency
• When radio is OFF: To adjust time and set alarm time
(1) Incrementing/decrementing receive frequency (when radio is ON)
Time to hold down
or
key
DOWN
Operation
UP
Less than 0.5 second
0.5 second or longer
Increments/decrements 1 channel
Seek up/down
26
µPD17071GB-012
Momentary Key
Function Description
The operation of each key is as follows during seek up/down operation.
UP
DOWN
Key
Function description
• If the key is pressed while the seek up operation is in progress, the seek
operation is stopped, and the frequency at which the seek operation was
started is received.
UP
• During the seek down operation, the seek up operation is started.
• If the key is pressed while the seek down operation is in progress, the
seek operation is stopped and the frequency at which the seek operation
was started is received.
DOWN
BAND
• During the seek up operation, the seek down operation is started.
Stops the seek operation and performs the operation of the key pressed.
~
M1
M5
MEMORY UP
Performs the operation of the key pressed.
The seek operation continues.
ALARM
CHECK
+5
STOP
Any key other than above is invalid.
(2) Adjusting time and setting alarm time (when radio is OFF)
By pressing the
time can be adjusted.
The following operation is performed in the alarm time setting mode and time adjust mode.
or
key in the alarm time setting mode or time adjust mode, the
UP
DOWN
Key
Digit to be
adjusted
Time to hold
down key
Operation
Minute digit
Less than
Increments time by 1 minute each time the key
is pressed.
UP
0.5 second
0.5 second
or longer
Fast-forward the time at a rate of 8 minutes/
second until the key is released. No carry to the
hour digit occurs. Each time the minute digit has
been adjusted, the second count value is reset.
Hour digit
Less than
Increments time by 1 hour each time the key is
pressed.
DOWN
0.5 second
0.5 second
or longer
Fast-forwards the time at a rate of 4 hours/
second until the key is released. The minute
digit and second count value are not affected.
27
µPD17071GB-012
2.5 Alarm Function
The alarm function outputs an alarm sound at specified alarm time every day.
Only one alarm time can be set.
When the watch function is not selected on initialization, the alarm function cannot be used.
For initialization of the watch function, refer to the description on the CLKENA pin (pin 56).
(1) Setting of alarm time
To set alarm time, select the alarm time setting mode when the radio is OFF.
Each time the
key is pressed when the radio is OFF, the mode is changed as follows:
MODE
Watch display
Alarm time setting mode
Watch adjust mode
The alarm time can be adjusted by using the
and
key in the alarm time setting mode.
Operation
UP
DOWN
The operation is as follows in the alarm time setting mode.
Key
Digit to Be Adjusted
Minute digit
Time to Hold Down Key
Less than 0.5 second
0.5 second or longer
Incrementstheminutebyoneeachtimethekeyispressed.
UP
Increments the minute at a rate of 8 minutes/second until
key is released.
Hour digit
Less than 0.5 second
0.5 second or longer
Increments the hour by one each time the key is pressed.
DOWN
Increments the hour at a rate of 4 hours/second until the
key is released.
The initial alarm time on power application is “00:00” (midnight).
(2) Setting/releasing alarm
By pressing the
key, the alarm is set for the time set.
ALARM
When the time has reached the alarm time set, output of the alarm sound is started.
The alarm can be released by pressing the key again while the alarm is set.
ALARM
However, the alarm cannot be set or released in the time adjust mode or alarm time setting mode.
(3) Canceling alarm sound output
Output of the alarm sound is stopped if the key for canceling the alarm sound output is pressed while the alarm
sound is being output.
The following key is used as the key for canceling the alarm sound output, depending on the initialization.
•
When initialization diode switch STOPSEL = 0
key
When initialization diode switch STOPSEL = 1
key
STOP
•
ALARM
The output of the alarm sound continues for 10 minutes from the start, or until it is canceled.
28
µPD17071GB-012
2.6 Key Lock Function
The key lock function is to lock the momentary keys and invalidate key operations.
The keys are locked by input to the KEYLOCK pin (pin 14).
When the input to the KEYLOCK pin is low, the keys can also be locked by a key operation.
(1) Locking keys by input to KEYLOCK pin (pin 14)
The momentary keys can be locked by input to the KEYLOCK pin.
The operation of the momentary keys can be manipulated as follows by the pin input.
•
High-level input
Locks keys and invalidates all key operations.
Also invalidates the key operation to unlock the keys.
Low-level input
•
All the keys perform normally when the keys are pressed.
At this time, the keys can be locked or unlocked by a key operation.
(2) Locking keys by key operation
The keys can be locked or unlocked by a key operation when the input to the KEYLOCK pin (pin 14) is low. If
the input to the KEYLOCK pin is high, however, the locked keys cannot be unlocked by a key operation.
The momentary keys are locked by performing the following key lock operation.
•
•
When the keys are locked, they are unlocked when the key lock operation is performed again.
When the keys are locked, all key operations other than that to unlock the key is invalid.
The following key lock operation is performed, depending on initialization.
•
When initialization diode switch STOPSEL = 0
Press the key and then the key twice.
When initialization diode switch STOPSEL =1
Press the key and then the key twice.
STOP
MODE
•
MODE
ALARM
29
µPD17071GB-012
3. LCD DISPLAY
3.1 LCD Panel
The configuration of the LCD panel is shown below.
M +5
ST TV
AM AM
ALM LOCK
SLEEP
MHz
kHz
FM PM
3.2 Font
3.3 LCD Pattern
(1) Connection of segment lines
M +5
AM AM
ALM LOCK
SLEEP
ST TV
MHz
kHz
LCD9
LCD8 LCD10
FM PM
LCD3
LCD4
LCD5
LCD6
LCD7
LCD11
LCD1
LCD0
LCD2
(2) Connection of common lines
M +5
AM AM
ST TV
ALM LOCK
SLEEP
FM PM
MHz
kHz
COM0
COM2
COM1
COM3
30
µPD17071GB-012
3.4 LCD Pin Assignment
Table 3-1 shows assignment of the LCD pins.
<1> through <4> in the figure and table below indicate the column positions of the 7-segment digits. “a” through
“f” indicate the segments of each digit.
M +5
ST TV
AM AM
ALM LOCK
SLEEP
FM PM
MHz
kHz
< 1 >
< 2 >
< 3 >
< 4 >
a
f
b
g
e
c
d
31
µPD17071GB-012
Table 3-1. Assignment of LCD Pins
Common
COM0 (31)
COM1 (32)
COM2 (33)
COM3 (34)
Segment
LCD0 (35)
AM
AM
—
ALM
LOCK
<1>g
<1>b
<2>g
<2>b
<3>g
<3>b
<4>g
<4>b
TV
SLEEP
—
FM
PM
<1>d
—
LCD1 (36)
LCD2 (37)
LCD3 (38)
LCD4 (39)
LCD5 (40)
LCD6 (41)
LCD7 (42)
LCD8 (43)
LCD9 (44)
LCD10 (45)
LCD11 (46)
LCD12 (47)
LCD13 (48)
LCD14 (49)
<1>e
<1>c
<2>e
<2>c
<3>e
<3>c
<4>e
<4>c
MHz
—
<1>a
<2>f
<2>a
<3>f
<3>a
<4>f
<4>a
+5
<2>d
:
<3>d
.
<4>d
kHz
—
M
ST
—
—
—
—
—
—
—
—
—
—
—
—
Remarks 1. Numbers in brackets ( ) are pin numbers.
2. —: Not used
32
µPD17071GB-012
3.5 Display Description
Symbol
Description
AM
Lights when the AM band is selected in the radio mode.
Lights only when a frequency is displayed.
AM
Lights when the time is in the morning in the 12-hour mode.
ALM
Lights while the alarm is set.
Always lights while alarm time is set, and goes off while time is being adjusted.
FM
Lights when the FM band is selected in the radio mode.
Lights only when a frequency is displayed.
kHz
LOCK
M
Lights when a frequency is displayed or AM band is selected in the radio mode.
Lights when key locking is valid.
Lights when the preset memory is manipulated in the radio mode.
Also lights at 1 Hz when the preset memory is enabled to be written.
MHz
+5
Lights when a frequency is displayed and the FM band is selected in the radio mode.
Lights when +5 (preset memory shift) is valid in the radio mode.
Lights when the time is in the afternoon in the 12-hour mode.
Lights when the sleep timer is set.
PM
SLEEP
ST
Lights when the stereo input is low in the radio mode.
TV
Lights when the TV band is selected in the radio mode.
Lights only when a frequency is displayed.
Lights when time is displayed. However, blinks at 1 Hz in synchronization with time display
when the time or alarm time is adjusted.
Lights when a frequency in the FM band is selected.
Lights to indicate the least significant digit of a frequency in the FM band (part).
Lights if the least significant digit is 5 and goes off if it is 0.
Displays a frequency, time, and timer.
The high-order digits is zero-suppressed.
33
µPD17071GB-012
3.6 Display Example
(1) Initial display (without time set, 12-hour display)
AM
(2) Initial display (without time set, 24-hour display)
(3) Watch display (during FM band selection)
M +5
ST
AM
This is an example of display with “M” and “+5” lit while a stereo station is selected
at 12:34 a.m.
The “FM” and “AM” indications are not displayed to avoid confusion with time when
time is displayed in the radio mode.
(4) Frequency display (during FM band selection)
MHz
FM
34
µPD17071GB-012
(5) Frequency display (during AM band selection)
AM
kHz
(6) Frequency display (during TV band selection)
TV
(7) Sleep timer display
35
µPD17071GB-012
4. MUTE OUTPUT TIMING CHART
This section describes the timing of the mute output.
<1> through <7> in the timing charts indicate the time required for the respective processing, as follows:
<1> Key ON chattering wait time
<2> Mute leading time
<3> Division ratio setting and display contents updating time
<4> Mute trailing time
<5> Scan time
<6> PLL lock wait time
<7> Key OFF chattering wait time
4.1 Manual up/down (operates by pressing key and releasing within 0.5 sec)
Less than
0.5 sec
< 1 >
< 7 >
< 2 >
< 3 >
< 4 >
MUTE
48–64 ms
48–64 ms 40–48 ms 8–16 ms
250–375 ms
Key ON
Key OFF
Time of <4> is 625 to 750 ms at the band edge.
4.2 Auto up/down (operates by holding down key for 0.5 sec or longer)
< 1 >
< 2 > < 3 > < 6 > < 5 >
40–48 ms 8–16 ms
< 3 > < 6 >
8–16 ms
< 3 > < 6 > < 5 >
8–16 ms
< 4 >
MUTE
48–64 ms
0.5 sec
250–375 ms
Key ON
SD, IF
Without check station
SD, IF
With check station
Scan time of <5> is as follows depending the received band.
FM: 40 to 48 ms
AM: 24 to 32 ms
TV: 496 to 504 ms
Time of <5> is 500 ms, and time of <4> is 625 to 750 ms at the band edge.
36
µPD17071GB-012
4.3 Calling Preset Memory
< 1 >
< 2 >
< 3 >
< 4 >
MUTE
48–64 ms 40–48 ms 8–16 ms
500–625 ms
Key ON
Time of <2> to <4> is the tuner mute time.
4.4 Band Selection
< 1 >
< 2 >
< 3 >
< 4 >
MUTE
48–64 ms 40–48 ms 8–16 ms
500–625 ms
Key ON
4.5 CE Pin
4.5.1 High level to low level
Until the CE pin goes high next time.
MUTE
8–16 ms
CE pin = high level low level
4.5.2 Low level to high level
< 2 >
< 3 >
< 4 >
MUTE
Less than 125 ms 40–48 ms 8–16 ms
496–504 ms
Tuner mute time
CE pin = low level high level
The tuner mute time is the same as 4.3 Calling Preset Memory.
37
µPD17071GB-012
4.6 Sleep Timer
Until the CE pin goes high next time.
MUTE
8–16 ms
Timer off time
38
µPD17071GB-012
5. ELECTRICAL SPECIFICATIONS (PRELIMINARY)
Absolute Maximum Ratings (TA = 25 °C)
Parameter
Supply voltage
Symbol
VDD
Condition
Rating
–0.3 to +4.0
–0.3 to VDD +0.6
–0.3 to VDD +0.3
–0.3 to VDD +0.3
–3.0
Unit
V
Input voltage
VI
CE pin
V
Other than CE pin
V
Output voltage
VO
IOH
V
High-level output current
1 pin
mA
mA
mA
mA
°C
°C
Total of all pins
1 pin
–20.0
Low-level output current
IOL
3.0
Total of all pins
20.0
Operating temperature
Storage temperature
TA
–20 to +70
–55 to +125
Tstg
Caution If any of the parameters exceeds the absolute maximum ratings, even momentarily, the quality of
the product may be impaired. The absolute maximum ratings are values that may physically damage
the product(s). Be sure to use the product(s) within the ratings.
Recommended Operating Range
Parameter
Supply voltage
Symbol
VDD1
Condition
When CPU, PLL, and AD operates
TA = –20 to +70 °C
MIN.
1.8
TYP. MAX.
Unit
V
3.0
3.6
VDD2
tRISE
When CPU operates,
TA = –10 to +70 °C
TA = 0 to +70 °C
1.7
1.6
3.0
3.0
3.6
3.6
500
V
V
and PLL and AD stop
Supply voltage rise time
VDD = 0 → 1.8 V (TA = 25 °C)
ms
39
µPD17071GB-012
DC Characteristics (TA = –20 to +70 °C, VDD = 1.8 to 3.6 V)
(1/2)
Parameter
Supply current
Symbol
IDD1
Condition
MIN.
TYP. MAX.
Unit
mA
When CPU and PLL are operating with sine wave
input to VCOH pin
6.5
35
10
10
45
18
(fIN = 250 MHz, VIN = 0.2 Vp-p)
VDD = 3 V, TA = 25 °C
IDD2
IDD3
When CPU is operating and PLL is stopped
(IF counter stops) with sine wave input to XIN pin
(fIN = 75 kHz, VIN = VDD)
µA
µA
VDD = 3 V, TA = 25 °C
When CPU and PLL are stopped (when HALT
instruction is used) with sine wave input to XIN pin
(fIN = 75 kHz, VIN = VDD)
VDD = 3 V, TA = 25 °C
Data retention voltage
Data retention current
VDDR
IDDR
On detection of power failure
1.7
V
When crystal oscillator stops
3
µA
VDD = 3.0 V, TA = 25 °C
High-level input voltage
Low-level input voltage
High-level output current
VIH1
VIH2
VIL1
VIL2
IOH1
CE, INT, P0B0-P0B3, P0C0, P0C1, P0D2, P0D3
P1A0-P1A3
0.8 VDD
0.5 VDD
V
V
CE, INT, P0B0-P0B3, P0C0, P0C1, P0D2, P0D3
P1A0-P1A3
0.2 VDD
0.05 VDD
V
V
P0A0-P0A3, P0B0-P0B3, P0C0, P0C1,
P0D2, P0D3, P1B0-P1B3, P1C0, BEEP
VOH = VDD –0.5 V
–0.5
mA
IOH2
IOH3
IOL1
EO
VOH = VDD –0.5 V
VOH = VDD –0.5 V
–0.2
–20
0.5
mA
µA
LCD0-LCD14
Low-level output current
P0A0-P0A3, P0B0-P0B3, P0C0,
P0C1, P0D2, P0D3, P1C0, BEEP
mA
VOL = 0.5 V
VOL = 0.5 V
VOL = 0.5 V
VOL = 0.5 V
IOL2
IOL3
IOL4
IIH1
EO
0.2
5
mA
µA
µA
µA
P1B0-P1B3
LCD0-LCD14
20
3
High-level input current
When P1A0 through P1A3 are pulled down
30
VIH = VDD = 1.8 V
IIH2
When XIN pin is pulled down
40
µA
VIH = VDD = 1.8 V
LCD drive voltage
VLCD1
When LCD0 through LCD14 outputs are open
2.8
3.1
3.3
V
C1 = 0.1 µF, C2 = 0.01 µF
TA = 25 °C
Output off leakage current
IL
EO
±1
µA
40
µPD17071GB-012
AC Characteristics (TA = –20 to +70 °C, VDD = 1.8 to 3.6 V)
(2/2)
Parameter
Symbol
fIN1
Condition
MIN.
0.3
TYP. MAX.
8
Unit
Operating frequency
VCOL pin, MF mode, with sine wave input
MHz
VIN = 0.2 Vp-p
VCOL pin, HF mode, with sine wave input
VIN = 0.3 Vp-p
VCOH pin, VHF mode, with sine wave input
VIN = 0.2 Vp-p
fIN2
fIN3
fIN4
fIN5
fIN6
5
130
230
500
2
MHz
MHz
kHz
40
FMIFC/AMIFC pin, AMIF count mode,
with sine wave input
400
0.4
10
VIN = 0.1 Vp-p
FMIFC/AMIFC pin, AMIF count mode,
MHz
MHz
with sine wave input
VIN = 0.15 Vp-p
VIN = 0.1 Vp-p
FMIFC/AMIFC pin, FMIF count mode,
with sine wave input
11
A/D Converter Characteristics (TA = –20 to +70 °C, VDD = 1.8 to 3.6 V)
Parameter
Symbol
Condition
MIN.
TYP. MAX.
Unit
bit
A/D conversion resolution
A/D conversion total error
4
TA = 25 °C
±1.5
LSB
41
µPD17071GB-012
6. PACKAGE
56 PIN PLASTIC QFP (10 10)
A
B
42
43
29
28
detail of lead end
C
D
S
R
Q
56
1
15
14
F
J
M
G
H
I
P
K
M
L
N
NOTE
ITEM MILLIMETERS
INCHES
0.504±0.016
0.394±0.008
0.394±0.008
0.504±0.016
0.031
Each lead centerline is located within 0.13 mm (0.005 inch) of
its true position (T.P.) at maximum material condition.
A
B
C
D
F
12.8±0.4
10.0±0.2
10.0±0.2
12.8±0.4
0.8
G
H
0.8
0.031
0.30±0.10
0.012±0.004
I
0.13
0.005
J
K
0.65 (T.P.)
1.4±0.2
0.026 (T.P.)
0.055±0.008
+0.008
0.024
L
0.6±0.2
–0.009
+0.004
0.006
+0.10
0.15
M
–0.003
–0.05
0.10
N
P
Q
R
S
0.004
1.7
0.067
0.125±0.075
5°±5°
0.005±0.003
5°±5°
2.0 MAX.
0.079 MAX.
S56GB-65-1A7-3
42
µPD17071GB-012
[MEMO]
43
µPD17071GB-012
[MEMO]
44
µPD17071GB-012
[MEMO]
45
µPD17071GB-012
NOTES FOR CMOS DEVICES
1 PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note: Strong electric field, when exposed to a MOS device, can cause destruction
of the gate oxide and ultimately degrade the device operation. Steps must
be taken to stop generation of static electricity as much as possible, and
quickly dissipate it once, when it has occurred. Environmental control must
be adequate. When it is dry, humidifier should be used. It is recommended
to avoid using insulators that easily build static electricity. Semiconductor
devices must be stored and transported in an anti-static container, static
shielding bag or conductive material. All test and measurement tools
including work bench and floor should be grounded. The operator should
be grounded using wrist strap. Semiconductor devices must not be touched
with bare hands. Similar precautions need to be taken for PW boards with
semiconductor devices on it.
2 HANDLING OF UNUSED INPUT PINS FOR CMOS
Note: No connection for CMOS device inputs can be cause of malfunction. If no
connection is provided to the input pins, it is possible that an internal input
level may be generated due to noise, etc., hence causing malfunction. CMOS
device behave differently than Bipolar or NMOS devices. Input levels of
CMOS devices must be fixed high or low by using a pull-up or pull-down
circuitry. Each unused pin should be connected to VDD or GND with a
resistor, if it is considered to have a possibility of being an output pin. All
handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3 STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note: Power-on does not necessarily define initial status of MOS device. Produc-
tion process of MOS does not define the initial operation status of the device.
Immediately after the power source is turned ON, the devices with reset
function have not yet been initialized. Hence, power-on does not guarantee
out-pin levels, I/O settings or contents of registers. Device is not initialized
until the reset signal is received. Reset operation must be executed imme-
diately after power-on for devices having reset function.
46
µPD17071GB-012
Regional Information
Some information contained in this document may vary from country to country. Before using any NEC
product in your application, please contact the NEC office in your country to obtain a list of authorized
representatives and distributors. They will verify:
• Device availability
• Ordering information
• Product release schedule
• Availability of related technical literature
• Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
• Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary
from country to country.
NEC Electronics Inc. (U.S.)
Santa Clara, California
Tel: 800-366-9782
NEC Electronics Hong Kong Ltd.
Hong Kong
Tel: 2886-9318
NEC Electronics (Germany) GmbH
Benelux Office
Eindhoven, The Netherlands
Tel: 040-2445845
Fax: 800-729-9288
Fax: 2886-9022/9044
Fax: 040-2444580
NEC Electronics (Germany) GmbH
Duesseldorf, Germany
Tel: 0211-65 03 02
NEC Electronics Hong Kong Ltd.
Seoul Branch
Seoul, Korea
NEC Electronics (France) S.A.
Velizy-Villacoublay, France
Tel: 01-30-67 58 00
Fax: 0211-65 03 490
Tel: 02-528-0303
Fax: 02-528-4411
Fax: 01-30-67 58 99
NEC Electronics (UK) Ltd.
Milton Keynes, UK
Tel: 01908-691-133
NEC Electronics Singapore Pte. Ltd.
United Square, Singapore 1130
Tel: 253-8311
NEC Electronics (France) S.A.
Spain Office
Madrid, Spain
Fax: 01908-670-290
Fax: 250-3583
Tel: 01-504-2787
NEC Electronics Italiana s.r.1.
Milano, Italy
Tel: 02-66 75 41
Fax: 01-504-2860
NEC Electronics Taiwan Ltd.
Taipei, Taiwan
Tel: 02-719-2377
NEC Electronics (Germany) GmbH
Scandinavia Office
Fax: 02-66 75 42 99
Fax: 02-719-5951
Taeby, Sweden
Tel: 08-63 80 820
NEC do Brasil S.A.
Sao Paulo-SP, Brasil
Tel: 011-889-1680
Fax: 011-889-1689
Fax: 08-63 80 388
J96. 8
47
µPD17071GB-012
[MEMO]
Purchase of NEC I2C components conveys a license under the Philips I2C Patent Rights to use these components
in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips.
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a device described herein or any other liability arising from use
of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a
customer designated "quality assurance program" for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
Anti-radioactive design is not implemented in this product.
M4 96.5
相关型号:
UPD17071GB-012
4-BIT SINGLE-CHIP MICROCONTROLLER WITH PLL FREQUENCY SYNTHESIZER CONTROLLER FOR PORTABLE FM/AM RADIO AND TV
NEC
UPD17071GB-012-1A7
4-BIT SINGLE-CHIP MICROCONTROLLER WITH PLL FREQUENCY SYNTHESIZER CONTROLLER FOR PORTABLE FM/AM RADIO AND TV
NEC
©2020 ICPDF网 联系我们和版权申明