PS9661L-V-E3-A [NEC]
Logic IC Output Optocoupler, 1-Element, 3750V Isolation, 25MBps, LEAD FREE, PLASTIC, SURFACE MOUNT PACKAGE-8;
| 型号： | PS9661L-V-E3-A |
| 厂家： | 
NEC |
| 描述： | Logic IC Output Optocoupler, 1-Element, 3750V Isolation, 25MBps, LEAD FREE, PLASTIC, SURFACE MOUNT PACKAGE-8 输出元件 光电 |
| 文件： | 总8页 (文件大小：80K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PRELIMINARY DATA SHEET
PHOTOCOUPLER
PS9661, PS9661L
HIGH NOISE REDUCTION, 25 Mbps CMOS OUTPUT TYPE
−NEPOC Series−
8-PIN DIP PHOTOCOUPLER
DESCRIPTION
The PS9661 and PS9661L are optically coupled isolators containing a GaAlAs LED on the input side and a CMOS
output IC on the output side.
These photocouplers are high common mode transient immunity (CMR), high-speed CMOS output type devices,
making them ideal for high-speed logic interface circuits.
The PS9661 is in a plastic DIP (Dual In-line Package) and the PS9661L is lead bending type (Gull-wing) for surface
mounting.
FEATURES
PIN CONNECTION
•
•
•
•
•
•
•
High-speed response (25 Mbps)
(Top View)
High common mode transient immunity (CMH, CML = 20 kV/µs TYP.)
High isolation voltage (BV = 3 750 Vr.m.s.)
Pulse width distortion (tPHL − tPLH = 3 ns TYP.)
Ordering number of tape product: PS9661L-E3, E4: 1 000 pcs/reel
Pb-Free product
6
5
8
1
7
Safety standards
•
•
UL approved: File No. E72422
2
3
4
DIN EN60747-5-2 (VDE0884 Part2) approved No. 40008906
(Option)
1. VDD1
2. VI
3. LED Anode*1
4. GND1
APPLICATIONS
5. GND2
•
•
FA Network
Measurement equipment
6. VO
7. NC
8. VDD2
*1 Do not connect the No. 3 pin
to the external circuit.
Leave it open.
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
Document No. PN10410EJ02V0DS (2nd edition)
Date Published January 2005 CP(K)
Printed in Japan
The mark shows major revised points.
NEC Compound Semiconductor Devices, Ltd. 2003, 2005
PS9661,PS9661L
PACKAGE DIMENSIONS (UNIT: mm)
PS9661
9.25 0.25
7.62
6.5 0.5
0.88 0.1
0.84 0.43
0 to 15˚
0.5 0.1
0.25 M
2.54
1.25 0.15
PS9661L
9.25 0.25
6.5 0.5
0.88 0.1
0.9 0.25
9.60 0.4
1.25 0.15
0.25 M
2.54
2
Preliminary Data Sheet PN10410EJ02V0DS
PS9661,PS9661L
MARKING EXAMPLE
No. 1 pin
Mark
Country Assembled
Type Number
Assembly Lot
PS9661
NL501
L
5
01
N
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code (L:Pb-Free)
Rank Code
3
Preliminary Data Sheet PN10410EJ02V0DS
PS9661,PS9661L
ORDERING INFORMATION
Solder Plating
Specification
Safety Standard
Application Part
Number*1
Part Number
PS9661
Order Number
Packing Style
Approval
Standard products
(UL approved)
PS9661-A
Pb-Free
Magazine case 50 pcs
PS9661
PS9661L
PS9661L-A
PS9661L
PS9661L-E3
PS9661L-E4
PS9661-V
PS9661L-E3-A
PS9661L-E4-A
PS9661-V-A
Embossed Tape 1 000 pcs/reel
Magazine case 50 pcs
DIN EN60747-5-2
(VDE0884 Part2)
PS9661
PS9661L-V
PS9661L-V-E3
PS9661L-V-E4
PS9661L-V-A
PS9661L-V-E3-A
PS9661L-V-E4-A
PS9661L
Embossed Tape 1 000 pcs/reel Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Input Voltage
Symbol
Ratings
−0.5 to VDD1+0.5
0 to 5.5
Unit
V
Diode
VI
Detector
Supply Voltage
VDD1,
V
VDD2
Output Voltage
Output Current
VO
IO
−0.5 to VDD2+0.5
10
V
mA
Isolation Voltage*1
BV
PT
TA
3 750
Vr.m.s.
mW
°C
Total Power Dissipation
Operating Ambient Temperature
Storage Temperature
150
−40 to +85
−40 to +125
Tstg
°C
*1 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-4 shorted together, 5-8 shorted together.
4
Preliminary Data Sheet PN10410EJ02V0DS
PS9661,PS9661L
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter
High Level Input Voltage
Low Level Input Voltage
Supply Voltage
Symbol
VIH
MIN.
2.0
0
TYP.
MAX.
VDD1
0.8
Unit
V
VIL
V
VDD1,
4.5
5.0
5.5
V
VDD2
Rise Time
tr
tf
100
+85
ns
Fall Time
Operating Ambient Temperature
TA
−10
°C
ELECTRICAL CHARACTERISTICS (Recommended Operating Conditions Unless Otherwise
Specified. )
Parameter
Symbol
IDD1L
IDD1H
II
Conditions
MIN.
TYP.*1
9
MAX.
10.0
3.0
10
Unit
mA
Diode
Low Level Supply Current
High Level Supply Current
Input Current
VI = 0 V
VI = VDD1
0.15
VI = 0 V or VI = VDD1
VI = 0 V
−10
µA
Detector Output Supply Current
IDD2L
IDD2H
VOH
5
9
mA
VI = VDD1
7
9
High Level Output
Voltage
IO = −20 µA, VI = VIH
IO = −4 mA, VI = VIH
IO = 20 µA, VI = VIL
IO = 4 mA, VI = VIL
4.4
4.0
5.0
4.8
0.01
0.32
V
Low Level Output
Voltage*2
VOL
0.1
1.0
Coupled Isolation Resistance
Isolation Capacitance
RI-O
VI-O = 1 kVDC, RH = 40 to 60%,
1011
Ω
TA = 25°C
CI-O
V = 0 V, f = 1 MHz, TA = 25°C
1.3
20
pF
Propagation Delay Time
(H → L)*3
tPHL
CL = 15 pF, CMOS Signal Levels,
VIL = 0 V, VIH = 5 V,
40
40
Propagation Delay Time
(L → H)*3
tPLH
VDD1 = VDD2 = 5 V,
23
3
Input Pulse tr = tf = 3 ns
Pulse Width
PW
40
ns
Pulse Width Distortion
(PWD)
tPHL-tPLH
8
Propagation Delay Skew
Rise Time
tPSK
tr
20
9
8
Fall Time
tf
Common Mode
CMH
VI = VDD1 = VDD2 = 5 V,
VO > 0.8 VDD1, VCM = 1 kV,
TA = 25°C
10
10
20
Transient Immunity at
High Level Output*4
kV/µs
Common Mode
CML
VI = VDD1 = VDD2 = 5 V, VI = 0 V,
VO < 0.8 VDD1, VCM = 1 kV,
TA = 25°C
20
Transient Immunity at
Low Level Output*4
5
Preliminary Data Sheet PN10410EJ02V0DS
PS9661,PS9661L
*1 Typical values at TA = 25°C, VDD = 5V
*2 The PS9661 and PS9661L may not operate correctly if the VDD is 3.5 V or lower when the power (VDD) is turned
on or off. V may become 3 V even when V is 0 V.
O
I
Therefore, use the device after confirming the characteristics (operations when the power is turned on or off).
*3 Test circuit for propagation delay time
PW = 40 ns
Duty= 50 %
5 V
0 V
INPUT VI
50 %
1
2
3
4
8
7
6
5
tPHL
tPLH
0.1 µF
VDD2
VDD1
VI
VOH
2.5 V
VOL
90 %
90 %
CL
VO
OUTPUT VO
10 %
10 %
*4 Test circuit for common mode transient immunity
V
CM
1 kV
1
2
3
4
8
7
6
5
0.1 µF
V
DD2
V
OH
SW:A
0.8 VDD
V
O
0.8 V
SW:B
V
OL
0.1
F
0.1
µ
F
µ
V
CM
TRUTH TABLE
VI , INPUT
LED
OFF
ON
VO , OUTPUT
H
L
H
L
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of more than 0.1 µF is used between VDD and GND near device. Also, ensure that the
distance between the leads of the photocoupler and capacitor is no more than 10 mm.
6
Preliminary Data Sheet PN10410EJ02V0DS
PS9661,PS9661L
When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority
having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license.
•
The information in this document is current as of January, 2005. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or
data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all
products and/or types are available in every country. Please check with an NEC sales representative
for availability and additional information.
•
•
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
•
•
•
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4-0110
7
Preliminary Data Sheet PN10410EJ02V0DS
PS9661,PS9661L
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
For further information, please contact
NEC Compound Semiconductor Devices, Ltd.
http://www.ncsd.necel.com/
E-mail: salesinfo@ml.ncsd.necel.com (sales and general)
techinfo@ml.ncsd.necel.com (technical)
Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general)
TEL: +852-3107-7303
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
TEL: +82-2-558-2120
FAX: +82-2-558-5209
FAX: +852-3107-7309
Hong Kong Head Office
Taipei Branch Office
Korea Branch Office
NEC Electronics (Europe) GmbH
http://www.ee.nec.de/
TEL: +49-211-6503-0 FAX: +49-211-6503-1327
California Eastern Laboratories, Inc.
TEL: +1-408-988-3500 FAX: +1-408-988-0279
http://www.cel.com/
0406
相关型号：
PS9661L-V-E4-A
Logic IC Output Optocoupler, 1-Element, 3750V Isolation, 25MBps, LEAD FREE, PLASTIC, SURFACE MOUNT, DIP-8
NEC
PS9687L1
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 8 mm
CEL
PS9687L1-A
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 8 mm
CEL
PS9687L1-A
Logic IC Output Optocoupler, 1-Element, 5000V Isolation, 10MBps, LEAD FREE, PLASTIC, DIP-8
NEC
PS9687L1-V
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 8 mm
CEL
PS9687L1-V-A
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 8 mm
CEL
PS9687L1-V-A
Logic IC Output Optocoupler, 1-Element, 5000V Isolation, 10MBps, LEAD FREE, PLASTIC, DIP-8
NEC
PS9687L2
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 8 mm
CEL
PS9687L2-A
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 8 mm
CEL
PS9687L2-A
Logic IC Output Optocoupler, 1-Element, 5000V Isolation, 10MBps, LEAD FREE, PLASTIC, SURFACE MOUNT, DIP-8
NEC
PS9687L2-E3
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 8 mm
CEL
PS9687L2-E3-A
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 8 mm
CEL
©2020 ICPDF网 联系我们和版权申明