PS7431-1A-E3-A [NEC]
Transistor Output SSR, 1-Channel, 3000V Isolation, 2.10 MM HEIGHT, LEAD FREE, SOP-4;型号: | PS7431-1A-E3-A |
厂家: | NEC |
描述: | Transistor Output SSR, 1-Channel, 3000V Isolation, 2.10 MM HEIGHT, LEAD FREE, SOP-4 输出元件 光电 |
文件: | 总13页 (文件大小:102K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
Solid State Relay
OCMOS FET
PS7431-1A
4-PIN SOP, HIGH ISOLATION VOLTAGE 3 000 Vr.m.s.
−NEPOC Series−
1-ch Optical Coupled MOS FET
DESCRIPTION
The PS7431-1A is a solid state relay containing GaAs a LED on the light emitting side (input side) and normally
open (N.O.) contact MOS FETs on the output side.
It is suitable for analog signal control because of its low offset and high linearity.
FEATURES
•
•
•
•
•
•
•
High isolation voltage (BV = 3 000 Vr.m.s.)
Small and thin package (4-pin SOP, Height = 2.1 mm)
1 channel type (1 a output)
Low LED operating current (IF = 2 mA)
Designed for AC/DC switching line changer
Low offset voltage
Ordering number of taping product : PS7431-1A-E3, E4: 900 pcs/reel
: PS7431-1A-F3, F4: 3 500 pcs/reel
Pb-Free product
<R>
<R>
•
•
Safety standards
• UL approved: File No. E72422
• BSI approved: No. 8767/8768
APPLICATIONS
•
•
•
•
Laptop PC, PDA
Modem card
Telephone, FAX
Measurement equipment
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10458EJ02V0DS (2nd edition)
Date Published September 2006 NS CP(K)
Printed in Japan
2004, 2006
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS7431-1A
PACKAGE DIMENSIONS (UNIT: mm)
4.0 0.5
TOP VIEW
4
1
3
1. LED Anode
2. LED Cathode
3. MOS FET
4. MOS FET
2
7.0 0.3
4.4
0.5 0.3
2.54
+0.10
0.25 M
0.40
–0.05
<R>
MARKING EXAMPLE (LASER MARKING)
Type Number
Assembly Lot
*1
431A
N601
No.1 pin Mark
N
6 01
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
*1 Bar : Pb-Free
Remark Applicable type numbers are underlined below
PS7431-1A
2
Data Sheet PN10458EJ02V0DS
PS7431-1A
<R>
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application Part
Number*1
PS7431-1A
PS7431-1A-A
Pb-Free
Magazine case 100 pcs
Standard products
(UL, BSI approved)
PS7431-1A
PS7431-1A-E3 PS7431-1A-E3-A
PS7431-1A-E4 PS7431-1A-E4-A
PS7431-1A-F3 PS7431-1A-F3-A
PS7431-1A-F4 PS7431-1A-F4-A
Embossed Tape 900 pcs/reel
Embossed Tape 3 500 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
50
Unit
mA
V
Diode
Forward Current (DC)
Reverse Voltage
Power Dissipation
Peak Forward Current*1
VR
5.0
PD
50
mW
A
IFP
1
MOS FET Break Down Voltage
Continuous Load Current
VL
350
120
240
V
IL
mA
mA
Pulse Load Current*2
(AC/DC Connection)
ILP
Power Dissipation
Isolation Voltage*3
PD
BV
PT
310
3 000
mW
Vr.m.s.
mW
°C
Total Power Dissipation
Operating Ambient Temperature
Storage Temperature
360
TA
−40 to +85
−40 to +100
Tstg
°C
*1 PW = 100 µs, Duty Cycle = 1%
*2 PW = 100 ms, 1 shot
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output
Pins 1-2 shorted together, 3-4 shorted together.
3
Data Sheet PN10458EJ02V0DS
PS7431-1A
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter
LED Operating Current
LED Off Voltage
Symbol
MIN.
TYP.
10
MAX.
20
Unit
mA
V
IF
2
0
VF
0.5
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Symbol
VF
Conditions
MIN.
TYP.
1.2
MAX.
Unit
V
Diode
Forward Voltage
Reverse Current
IF = 10 mA
VR = 5 V
1.4
5.0
1.0
IR
µA
µA
pF
mA
Ω
MOS FET Off-state Leakage Current
Output Capacitance
ILoff
VD = 350 V
0.03
35
Cout
IFon
VD = 0 V, f = 1 MHz
IL = 120 mA
Coupled
LED On-state Current
On-state Resistance
2.0
33
Ron1
Ron2
ton
IF = 10 mA, IL = 10 mA
26
20
IF = 10 mA, IL = 120 mA, t ≤ 10 ms
IF = 10 mA, VO = 5 V, RL = 500 Ω,
PW ≥ 10 ms
26
Turn-on Time*1, 2
0.3
0.07
2.0
0.2
ms
Turn-off Time*1, 2
toff
Isolation Resistance
Isolation Capacitance
RI-O
CI-O
VI-O = 1.0 kVDC
109
Ω
V = 0 V, f = 1 MHz
0.5
pF
*1 Test Circuit for Switching Time
I
F
50%
Input
Pulse Input
V
V
L
0
VO
= 5 V
90%
Input monitor
O
monitor
Output
R
in
R
L
10%
ton
toff
<R>
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
4
Data Sheet PN10458EJ02V0DS
PS7431-1A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
100
80
60
40
20
0
300
200
100
0
85
85
–25
0
25
50
75
100
–25
0
25
50
75
100
Ambient Temperature T
A
(˚C)
Ambient Temperature T
A
(˚C)
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
1.8
1.6
1.4
1.2
1.0
0.8
100
90
80
70
60
50
40
30
20
10
f = 1 MHz
I
F
= 50 mA
30 mA
20 mA
10 mA
5 mA
1 mA
–25
0
25
50
75
100
0
20
40
60
80
(V)
100
120
Ambient Temperature T
A
(˚C)
Applied Voltage V
D
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
LOAD CURRENT vs. LOAD VOLTAGE
10–6
10–7
10–8
10–9
10–10
10–11
200
IF = 10 mA
TA = 85˚C
100
–4.0
–2.0
0
2.0
4.0
25˚C
–100
–200
0
100
200
300
(V)
400
Applied Voltage V
D
Load Voltage V (V)
L
Remark The graphs indicate nominal characteristics.
5
Data Sheet PN10458EJ02V0DS
PS7431-1A
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
ON-STATE RESISTANCE DISTRIBUTION
3.0
30
25
20
15
n = 50 pcs,
Normalized to 1.0
I
F
= 10 mA,
= 10 mA
at T = 25˚C,
A
2.5
2.0
1.5
1.0
0.5
0.0
I
L
I
F
= 10 mA,
= 10 mA
I
L
10
5
0
–40 –20
0
20
40
60
(˚C)
80
100
25
26
27
28
29
Ambient Temperature T
A
On-state Resistance Ron1 (Ω)
ON-STATE RESISTANCE vs.
LOAD CURRENT
ON-STATE RESISTANCE DISTRIBUTION
30
35
30
25
20
15
n = 50 pcs,
I = 10 mA
F
I
F
= 10 mA,
= 120 mA
25
20
15
I
L
10
5
0
19
20
21
22
23
0
20
40
60
80
100 120 140
(mA)
On-state Resistance Ron2 (Ω)
Load Current I
L
ON-STATE RESISTANCE vs.
LOAD CURRENT
TURN-ON TIME vs. FORWARD CURRENT
6
35
30
25
20
15
VO = 5 V
5
4
3
2
1
IL
= 10 mA
120 mA
0
2
4
6
8
10
12
0
5
10
15
(mA)
20
Forward Current I
F
Forward Current I
F
(mA)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PN10458EJ02V0DS
PS7431-1A
TURN-OFF TIME vs. FORWARD CURRENT
TURN-ON TIME DISTRIBUTION
18
16
14
12
10
8
0.30
n = 50 pcs,
= 10 mA,
= 5 V
VO = 5 V
I
V
F
0.25
0.20
0.15
0.10
0.05
O
6
4
2
0
0
5
10
15
(mA)
20
0.24
0.28
0.32
0.36
Forward Current I
F
Turn-on Time ton (ms)
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
TURN-OFF TIME DISTRIBUTION
30
25
20
15
10
5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
n = 50 pcs,
Normalized to 1.0
I
V
F
= 10 mA,
= 5 V
at T
A
= 25˚C,
= 10 mA,
= 5 V
O
I
F
V
O
0
0.06
0.07
0.08
0.09
0.10
–40 –20
0
20
40
60
(˚C)
80
100
Turn-off Time toff (ms)
Ambient Temperature T
A
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Normalized to 1.0
at T
A
= 25˚C,
= 10 mA,
= 5 V
I
F
V
O
–40 –20
0
20
40
60
(˚C)
80
100
Ambient Temperature T
A
Remark The graphs indicate nominal characteristics.
7
Data Sheet PN10458EJ02V0DS
PS7431-1A
TAPING SPECIFICATIONS (in millimeters)
Outline and Dimensions (Tape)
2.0 0.05
4.0 0.1
+0.1
–0
2.9 MAX.
1.5
1.55 0.1
2.4 0.1
0.3
4.6 0.1
8.0 0.1
Tape Direction
PS7431-1A-E3
PS7431-1A-E4
Outline and Dimensions (Reel)
2.0 0.5
2.0 0.5
13.0 0.2
φ
φ
φ
R 1.0
φ
21.0 0.8
13.5 1.0
17.5 1.0
11.9 to 15.4
Outer edge of
flange
Packing: 900 pcs/reel
8
Data Sheet PN10458EJ02V0DS
PS7431-1A
Outline and Dimensions (Tape)
2.0 0.05
+0.1
4.0 0.1
2.9 MAX.
1.5
–0
1.55 0.1
2.4 0.1
0.3
4.6 0.1
8.0 0.1
Tape Direction
PS7431-1A-F4
PS7431-1A-F3
Outline and Dimensions (Reel)
2.0 0.5
2.0 0.5
13.0 0.2
φ
φ
R 1.0
φ
φ
φ
21.0 0.8
13.5 1.0
17.5 1.0
11.9 to 15.4
Outer edge of
flange
Packing: 3 500 pcs/reel
9
Data Sheet PN10458EJ02V0DS
PS7431-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
10 seconds or less
• Time of peak reflow temperature
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 30 s
<R>
• Number of reflows
• Flux
Two
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120 30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
260°C or below (molten solder temperature)
10 seconds or less
• Preheating conditions
• Number of times
• Flux
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
<R>
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
• Time (each pins)
350°C or below
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
10
Data Sheet PN10458EJ02V0DS
PS7431-1A
(4) Cautions
<R>
<R>
• To avoid quality degradation, assembling within 1 month after take this device out from covered pack is required.
(Storage conditions 25°C, 65%RH MAX.)
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
11
Data Sheet PN10458EJ02V0DS
PS7431-1A
•
The information in this document is current as of September, 2006. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
12
Data Sheet PN10458EJ02V0DS
PS7431-1A
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
For further information, please contact
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: contact@ncsd-hk.necel.com
Hong Kong Head Office TEL: +852-3107-7303
FAX: +852-3107-7309
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
TEL: +82-2-558-2120 FAX: +82-2-558-5209
Taipei Branch Office
Korea Branch Office
NEC Electronics (Europe) GmbH
http://www.eu.necel.com/
TEL: +49-211-6503-0
FAX: +49-211-6503-1327
California Eastern Laboratories, Inc.
http://www.cel.com/
TEL: +1-408-988-3500
FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
0604
相关型号:
PS7431-1A-F3-A
Transistor Output SSR, 1-Channel, 3000V Isolation, 2.10 MM HEIGHT, LEAD FREE, SOP-4
NEC
PS7431-1A-F4-A
Transistor Output SSR, 1-Channel, 3000V Isolation, 2.10 MM HEIGHT, LEAD FREE, SOP-4
NEC
©2020 ICPDF网 联系我们和版权申明