JM1AN [NAIS]
COMPACT POWER RELAY FOR INDUCTIVE LOAD; 紧凑型功率继电器电感式负载型号: | JM1AN |
厂家: | NAIS(MATSUSHITA ELECTRIC WORKS) |
描述: | COMPACT POWER RELAY FOR INDUCTIVE LOAD |
文件: | 总4页 (文件大小:121K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VDE
COMPACT POWER RELAY
FOR INDUCTIVE LOAD
JM-RELAYS
30.4
16
• Excellent contact welding resistance
High contact pressure, a forced opening
mechanism, and a forced wiping
mechanism realizes an excellent contact
welding resistance.
• Flux resistance mechanism
The terminal area is plugged with resin to
prevent flux seepage during PCB mount-
ing. (TMP type)
1.197
.630
26.5
1.043
31
1.220
• Conforms to the various safety stan-
dards
UL, CSA approved.
28.5
1.122
• High breakdown voltage and surge
resistant relay
16.8
.661
Slim TMP type
More than 6.4 mm .252 inch maintained
for the insulation distance between con-
tacts and coil, and the breakdown voltage
between contacts and coil is 5,000 V for 1
minute. In addition, the surge resistance
between contacts and coil is greater than
10,000 V.
TÜV, VDE under application.
• The line up can support economical
mounting methods.
31
1.220
28.5
1.122
Flat TM type
The relay are equipped with a drive termi-
nal (coil terminal) on one side for PCBs,
and a load terminal (tab terminal #250) on
the reverse side. The line up includes the
TM type which can be attached directly to
the PCB composing a drive circuit, and
the TMP type which supports economical
wiring.The TMP type can also be directly
attached, and a high capacity load can be
wired to the tab terminal.
17.2
.677
mm inch
Flat TMP type
• Resistant to external force
An absorber mechanism is used on the
load terminals, giving a large improve-
ment in characteristics variations caused
by the external force during FASTON
placement/removal.
FEATURES
• Compact, high-capacity, and resis-
tant to inductive loads
The relay is a compact 16×30.4×26.5 mm
.630×1.197×1.043 inch. It can control an
inductive load (cosϕ = 0.7) with inrush
current of 70 A and steady state current of
20 A.
SPECIFICATIONS
Contact
Characteristics
Arrangement
1 Form A
Max. operating speed
180 cpm
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
30 mΩ
(Cd free type: 100 mΩ)
Initial insulation resistance*1
Min. 100 MΩ (at 500 V DC)
Between open
1,000 Vrms for 1 min.
Contact material
Silver alloy
20 A 250 V AC
5,000 VA
250 V AC
20 A
contacts
Initial
breakdown
voltage*2
Nominal switching capacity
Between con-
tacts
Rating
(resistive
load)
5,000 Vrms for 1 min.
Max. switching power
and coil
Max. switching voltage
Surge voltage between con-
tact and coil*3
Operate time*4
(at nominal voltage)(at 20°C)
Release time (without diode)*4
Min. 10,000 V
Max. switching current
Mechanical (at 180 cpm)
106
Max. 20ms (Approx. 8 ms)
Max. 10ms (Approx. 3 ms)
Resistive load 20 A, 250
V AC (cosϕ = 1)
105
Inrush 70 A, Steady
20 A (250 V AC
cosϕ = 0.7)
(at nominal voltage)(at 20°C)
Expected
life (min.
ope.)
Electrical
Life
(at 20 cpm)
105
Max. 55°C (Contact switching current:
20 A/voltage applied to coil: 100%V)
Temperature rise (at 60°C)
Inductive
load
Inrush 80 A, Cut-off
80 A (When the
motor is locked) (250
V AC cosϕ = 0.7)
Functional*5
Shock
Min. 98 m/s2 {10 G}
Min. 980 m/s2 {100 G}
1.5×103
resistance
Destructive*6
10 to 55 Hz at double
amplitude of 1.6 mm
Functional*7
Vibration
Coil
resistance
10 to 55 Hz at double
amplitude of 2 mm
Destructive
Nominal operating power
900 mW
Remarks
Conditions for operation,
transport and storage*8
(Not freezing and condens-
ing at low temperature)
Ambient
temp.
–40°C to +60°C
–40°F to +140°F
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section
*2 Detection current: 10mA
Humidity
5 to 85% R.H.
*3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*4 Excluding contact bounce time
Slim TMP
Approx. 28 g .99 oz
Approx. 32 g 1.13 oz
Approx. 33 g 1.16 oz
*5 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*6 Half-wave pulse of sine wave: 6ms
Unit weight Flat TMP
Flat TM
*7 Detection time: 10µs
*8 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 24).
114
JM
TYPICAL APPLICATIONS ORDERING INFORMATION
• Compressor and heater control in
air conditioners
Ex. JM 1a
N
Z
TMP
DC 24V
• Power control in hot air type heaters
• Magnetron control in microwave ovens
• Lamp and motor control in
OA equipment such as copiers and fac-
similes.
Contact
arrangement
Classification
of type
Mounting
classification
Pickup voltage
Coil voltage
TMP: TMP type
TM: TM type
P: PCB type(Slim type)
N: 70% of
nominal voltage
Nil: Slim type
iZ: Flat type
DC 5, 6, 9, 12,
24, 48 V
1a: 1 Form A
(Notes) 1. Standard packing: Carton: 50pcs. Case: 200pcs.
2. For Cd free contact material type, add suffix “-F”.
UL/CSA, VDE approved type is standard.
TYPES AND COIL DATA (at 20°C 68°F)
Part No.
Nominal
Coil
Nominal
Max.
Nominal
voltage,V
DC
Pick-up Drop-out operating resis- operating allowable
voltage voltage, current, tance, Ω power,
Slim
Flat
voltage,
V DC
TMP
PCB
TMP
TM
mA
(±10%)
27.8
40
mW
900
900
900
900
900
900
JM1aN-TMP-DC5V JM1aN-P-DC5V JM1aN-ZTMP-DC5V JM1aN-ZTM-DC5V
JM1aN-TMP-DC6V JM1aN-P-DC6V JM1aN-ZTMP-DC6V JM1aN-ZTM-DC6V
JM1aN-TMP-DC9V JM1aN-P-DC9V JM1aN-ZTMP-DC9V JM1aN-ZTM-DC9V
JM1aN-TMP-DC12V JM1aN-P-DC12V JM1aN-ZTMP-DC12V JM1aN-ZTM-DC12V
JM1aN-TMP-DC24V JM1aN-P-DC24V JM1aN-ZTMP-DC24V JM1aN-ZTM-DC24V
JM1aN-TMP-DC48V JM1aN-P-DC48V JM1aN-ZTMP-DC48V JM1aN-ZTM-DC48V
5
6
3.5
4.2
0.5
0.6
0.9
1.2
2.4
4.8
180
5.5
6.6
150
100
75
9
6.3
90
9.9
12
24
48
8.4
160
13.2
26.4
52.8
mm inch
16.8
33.6
37.5
18.75
640
2,560
DIMENSIONS
Slim TMP type
Schematic
PC board pattern (Copper-side view)
12.9
11
6.35
.250
.508 .433
27.6±0.1
FASTON 250
4-1.8 dia.
1.087±.004
10.0
.394
4-.071 dia.
13.8±0.1
.543±.004
12.0±0.1
.472±.004
26.0
1.024
0.5
.020
N.O.
COM
12.0±0.1 10.0±0.1
.472±.004 .394±.004
12.0 10.0
.472 .394
12.0
.472
16.0
.630
1.8
.071
PC board side
4.0
.157
27.6
1.087
30.4
1.197
3
4
N.O. COM
6.0
.236
1
2
26.0
1.024
General tolerance: ±0.4 ±.016
Slim PCB type
Schematic
PC board pattern (Copper-side view)
27.6±0.1
1.087±.004
4-1.8 dia.
4-.071 dia.
N.O.
COM
13.8±0.1
.543±.004
26.0
1.024
0.5
.020
12.0±0.1
.472±.004
PC board side
12.0 10.0
.472 .394
12.0
1.8
.472
16.0
.630
4.0
.157
.071
27.6
1.087
30.4
12.0±0.1 10.0±0.1
.472±.004 .394±.004
1.197
3
4
N.O. COM
6.0
.236
1
2
26.0
1.024
Tolerance: ±0.1 ±.004
General tolerance: ±0.4 ±.016
115
JM
Flat TMP type
mm inch
31
1.220
28.5
Schematic
PC board pattern (Bottom view)
1.122
C O M N . O .
15
Faston 250
2.15
20±0.1
.085
6.8
.268
.787±.004
2.15
.085
8
N.O.
.315 .591
COM
N.O.
6.35
.250
0.8
COM
2.5±0.1
.031
24.5±0.1
.098±.004
.965±.004
1.5
.059
0.2
9.9
Faston 250
.008
.390
COM
Coil
N.O.
Coil
5.2
.205
18
17.2
.677
22±0.1
4-1.8 dia.
1
.709
.866±.004 4-.071 dia.
.039
PC board side
4.5
.177
3.5
24
.138
.945
6.2
.224
9.2
.362
5
6
N.O.
COM
17
.669
1
2
General tolerance: ±0.4 ±.016
Tolerance: ±0.1 ±.004
Flat TM type
47.5
1.870
31
1.220
11.2
.441
10
.394
Schematic
Panel cutout
39.5±0.1
Faston 187
1.555±.004
28.5
1.122
R2.25
R.088
C O M N . O .
4.5
.177
Coil
2-4.5±0.1 dia.
2-.177±.004 dia.
Faston 250
6.8
Faston 187
39.5
1.555
N.O.
COM
.268
1.9
2.15
.085
8
15
.075
.315 .591
6.35
.250
0.8
0.5
.031
.020
Faston 250
1.5
9.9
.390
.059
8.2
.323
17.6
.693
2
16.8
.661
0.6
.079
.024
General tolerance: ±0.4 ±.016
REFERENCE DATA
1. Coil temperature rise
2. Ambient temperature characteristics
Sample: JM1aN-TMP-DC24V, 5 pcs.
3. Operate/release time
Sample: JM1aN-TMP-DC24V, 5 pcs.
Place to be measured: Inside of coil
Ambient temperature: 25°C 77°F
14
13
12
11
60
50
40
30
20A
0A
30
20
Drop-out voltage
10
9
8
7
6
5
4
3
2
0
Operate time
10
Pick-up voltage
–40 –20
0
20 40 60 80
Ambient temperature, °C
–10
Max.
-
x
Min.
Release time
Max.
20
0
–20
–30
-
x
Min.
80
90 100 110 120 130
Coil applied voltage, %V
80
90 100 110 120 130
Coil applied Voltage, %V
116
JM
4. Life curve
100
50
250V AC
resistive load
10
5
10
15
20
Contact current, A
Contact welding: 0 time
Miscontact: 0 time
Change of pick-up and drop-out voltage
5-(1). 200 V AC electrical life test (200 V
AC inverter dummy load)
9
Sample: JM1aN-TMP-DC12V, 6 pcs.
Load: Inrush 108 A, Steady 15 A,
Inverter dummy 200 V AC
Switching frequency: ON 5 s, OFF 5 s
Circuit
Pick-up voltage
8
7
Max.
-
x
6
5
Min.
70 µF
JM relay contact
4
Drop-out voltage
Reactor
3
2
1
Max.
-
Detection of welding
and miscontact
x
200 V AC
1,800 µF
Min.
1.9 Ω
Switch
(Welding detection time: 0.2 s)
0
3
6
No. of operations, ×104
5-(2). 100 V AC electrical life test (100 V AC inverter dummy load)
Sample: JM1aN-TMP-DC12V, 20 pcs.
Load: Inrush 224 A, Steady 20A,
Inverter dummy 100 V AC
Contact welding: 0 time
Miscontact: 0 time
Change of pick-up and drop-out voltage
9
Switching frequency: ON 10 s, OFF 10 s
Circuit
Pick-up voltage
8
Max.
7
JM relay contact
Reactor
-
x
6
5
2,000 µF
470 µF
470 µF
Detection of welding
and miscontact
100 V AC
Min.
4
Drop-out voltage
3
Max.
(Welding detection time: 0.2 s)
-
x
2
1
0
Min.
3
6
No. of operations, ×104
5-(3). Inrush 70 A, Steady 20 A, 250 V AC compressor dummy load
Sample: JM1aN-TMP-DC12V, 6 pcs.
Load: (Endurance) inrush 70 A cosϕ = 0.7 (0.3
s), steady 20A pf = 0.9,
250V AC compressor dummy
(Overload) 80A cosϕ = 0.7, 250 V AC
No. of operations: (Endurance) 105 times
(Overload) 1,000 times (after
endurance test)
Contact welding: 0 time
Miscontact: 0 time
Change of pick-up and drop-out voltage
9
8
Pick-up voltage
7
Max.
-
6
5
x
Switching frequency: (Endurance) ON 1.5 s,
OFF 1.5 s
Min.
4
(Overload) ON 3 s,
OFF 2 min., 57 s
Max.
Drop-out voltage
3
-
x
Circuit (endurance)
Min.
2
1
0
12 V
JM relay contact
DC
Compressor
dummy load
device
3
5
7
10
Detection of welding
and miscontact
250 V AC
No. of operations, ×104
For Cautions for Use, see Relay Technical Information (Page 11 to 39).
117
相关型号:
©2020 ICPDF网 联系我们和版权申明