JM1AN-P-DC5V [PANASONIC]
Electromechanical Relay,;型号: | JM1AN-P-DC5V |
厂家: | PANASONIC |
描述: | Electromechanical Relay, |
文件: | 总4页 (文件大小:109K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VDE
COMPACT POWER RELAY
FOR INDUCTIVE LOAD
JM RELAYS
30.4
• Excellent contact welding resistance
High contact pressure, a forced opening
mechanism, and a forced wiping
mechanism realizes an excellent contact
welding resistance.
• Flux resistance mechanism
The terminal area is plugged with resin to
prevent flux seepage during PCB
mounting. (TMP type)
16
1.197
.630
26.5
1.043
31
1.220
• Conforms to the various safety
standards
UL, CSA approved.
28.5
1.122
• High breakdown voltage and surge
resistant relay
16.8
.661
More than 6.4 mm .252 inch maintained
for the insulation distance between
contacts and coil, and the breakdown
voltage between contacts and coil is
5,000 V for 1 minute. In addition, the
surge resistance between contacts and
coil is greater than 10,000 V.
TÜV, VDE under application.
Slim TMP type
31
• The line up can support economical
mounting methods.
1.220
28.5
1.122
Flat TM type
The relay are equipped with a drive
terminal (coil terminal) on one side for
PCBs, and a load terminal (tab terminal
#250) on the reverse side. The line up
includes the TM type which can be
attached directly to the PCB composing a
drive circuit, and the TMP type which
supports economical wiring. The TMP
type can also be directly attached, and a
high capacity load can be wired to the tab
terminal.
17.2
.677
mm inch
Flat TMP type
• Resistant to external force
An absorber mechanism is used on the
load terminals, giving a large
improvement in characteristics variations
caused by the external force during
FASTON placement/removal.
FEATURES
• Compact, high-capacity, and
resistant to inductive loads
The relay is a compact 16×30.4×26.5 mm
.630×1.197×1.043 inch. It can control an
inductive load (cosϕ = 0.7) with inrush
current of 70 A and steady state current
of 20 A.
SPECIFICATIONS
Contact
Characteristics
Arrangement
1 Form A
Max. operating speed
180 cpm
Initial insulation resistance*1
Min. 100 MΩ (at 500 V DC)
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
30 mΩ
(Cd free type: 100 mΩ)
Between open
contacts
1,000 Vrms for 1 min.
Initial
breakdown
Silver alloy
20 A 250 V AC
5,000 VA
250 V AC
20 A
Nominal switching capacity
Between
voltage*2
5,000 Vrms for 1 min.
Min. 10,000 V
Max. switching power
contacts and coil
Rating
(resistive Max. switching voltage
Surge voltage between
contact and coil*3
Operate time*4
(at nominal voltage)(at 20°C)
Release time (without diode)*4
load)
Max. switching current
Min. switching capacity#1
Mechanical (at 180 cpm)
100 mA, 5 V DC
106
Max. 20ms (Approx. 8 ms)
Max. 10ms (Approx. 3 ms)
Resistive load 20 A,
250 V AC (cosϕ = 1)
105
(at nominal voltage)(at 20°C)
Inrush 70 A,
Steady 20 A (250
V AC cosϕ = 0.7)
Inrush 80 A, Cut-off
80 A (When the
motor is locked) (250
V AC cosϕ = 0.7)
Max. 55°C (Contact switching current:
Expected
life (min.
ope.)
Temperature rise (at 60°C)
Electrical
Life
(at 20 cpm)
105
20 A/voltage applied to coil: 100%V)
Functional*5
Shock
Min. 98 m/s2 {10 G}
Min. 980 m/s2 {100 G}
Inductive
load
Destructive*6
resistance
1.5×103
10 to 55 Hz at double
amplitude of 1.6 mm
Functional*7
Vibration
resistance
10 to 55 Hz at double
amplitude of 2 mm
Coil
Destructive
Nominal operating power
900 mW
Conditions for opera- Ambient
–40°C to +60°C
–40°F to +140°F
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
tion, transport and
temp.
storage*8
(Not freezing and
condensing at low
temperature)
Remarks
Humidity
5 to 85% R.H.
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as “Initial breakdown voltage” section
*2 Detection current: 10mA
Slim TMP
Approx. 28 g .99 oz
Approx. 32 g 1.13 oz
Approx. 33 g 1.16 oz
*3 Wave is standard shock voltage of 1.2 × 50µs according to JEC-212-1981
*4 Excluding contact bounce time
Unit weight Flat TMP
Flat TM
*5 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*6 Half-wave pulse of sine wave: 6ms
*7 Detection time: 10µs
*8 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
JM
TYPICAL APPLICATIONS ORDERING INFORMATION
• Compressor and heater control in
air conditioners
Ex. JM 1a
N
Z
TMP
DC 24V
F
• Power control in hot air type heaters
• Magnetron control in microwave ovens
• Lamp and motor control in
OA equipment such as copiers and
facsimiles.
Contact
arrangement
Classification
of type
Mounting
classification
Pickup voltage
N: 70% of
Coil voltage Environmental support
F: RoHS Directive
conforming type
TMP: TMP type
TM: TM type (Flat type)
P: PCB type(Slim type)
(AgSnO2 type)
Nil: RoHS Directive
non-conforming
Nil: Slim type
nominal voltage iZ: Flat type
DC 5, 6, 9,
12, 24, 48 V
1a: 1 Form A
type (AgCdO type)
(Note) 1. Standard packing: Carton: 50pcs. Case: 200pcs.
UL/CSA, VDE approved type is standard.
TYPES AND COIL DATA (at 20°C 68°F)
Part No.
Nominal
Nominal
operating allowable
power,
mW
Max.
Nominal
voltage,
V DC
Coil
resistance,
Ω ( 10%)
Pick-up Drop-out operating
voltage voltage, current,
mA
Slim
Flat
voltage,
V DC
TMP
PCB
TMP
TM
JM1aN-TMP-DC5V (-F)
JM1aN-TMP-DC6V (-F)
JM1aN-TMP-DC9V (-F)
JM1aN-P-DC5V (-F)
JM1aN-P-DC6V (-F)
JM1aN-P-DC9V (-F)
JM1aN-ZTMP-DC5V (-F)
JM1aN-ZTMP-DC6V (-F)
JM1aN-ZTMP-DC9V (-F)
JM1aN-ZTM-DC5V (-F)
JM1aN-ZTM-DC6V (-F)
JM1aN-ZTM-DC9V (-F)
5
6
3.5
4.2
0.5
0.6
0.9
1.2
2.4
4.8
180
150
100
75
27.8
40
900
900
900
900
900
900
5.5
6.6
9
6.3
90
9.9
JM1aN-TMP-DC12V (-F) JM1aN-P-DC12V (-F) JM1aN-ZTMP-DC12V (-F) JM1aN-ZTM-DC12V (-F)
JM1aN-TMP-DC24V (-F) JM1aN-P-DC24V (-F) JM1aN-ZTMP-DC24V (-F) JM1aN-ZTM-DC24V (-F)
JM1aN-TMP-DC48V (-F) JM1aN-P-DC48V (-F) JM1aN-ZTMP-DC48V (-F) JM1aN-ZTM-DC48V (-F)
12
24
48
8.4
160
640
2,560
13.2
26.4
52.8
16.8
33.6
37.5
18.75
mm inch
DIMENSIONS
Slim TMP type
Schematic
(Copper-side view)
27.6 0.1
12.9
11
6.35
.250
FASTON 250
4-1.8 dia.
4-.071 dia.
1.087 .004
.508 .433
13.8 0.1
.543 .004
10.0
.394
12.0 0.1
.472 .004
N.O.
COM
26.0
1.024
0.5
.020
12.0 0.1 10.0 0.1
.472 .004 .394 .004
12.0 10.0
.472 .394
PC board side
12.0
.472
16.0
.630
1.8
.071
4.0
.157
27.6
PC board pattern
1.087
30.4
1.197
3
4
N.O. COM
6.0
.236
1
2
26.0
1.024
General tolerance: 0.4 .016
Slim PCB type
Schematic
(Copper-side view)
27.6 0.1
1.087 .004
4-1.8 dia.
4-.071 dia.
N.O.
COM
13.8 0.1
.543 .004
26.0
1.024
0.5
12.0 0.1
.472 .004
PC board side
.020
12.0 10.0
.472 .394
PC board pattern
12.0
1.8
.472
16.0
.630
4.0
.157
.071
12.0 0.1 10.0 0.1
.472 .004 .394 .004
27.6
1.087
30.4
1.197
3
4
N.O. COM
6.0
.236
1
2
26.0
1.024
General tolerance: 0.4 .016
Tolerance: 0.1 .004
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
JM
Flat TMP type
mm inch
31
1.220
Schematic
PC board pattern (Bottom view)
28.5
1.122
C O M N . O .
15
2.15
Faston 250
20 0.1
.085
.787 .004
6.8
.268
2.15
.085
N.O.
8
.315 .591
COM
N.O.
COM
6.35
.250
0.8
2.5 0.1
24.5 0.1
.098 .004
.965 .004
.031
1.5
.059
0.2
9.9
Faston 250
COM
Coil
.008
.390
N.O.
Coil
5.2
.205
22 0.1
4-1.8 dia.
18
17.2
.677
1
.866 .004 4-.071 dia.
.709
.039
PC board side
4.5
.177
3.5
24
.138
.945
6.2
.224
9.2
.362
5
6
N.O.
COM
17
.669
1
2
General tolerance: 0.4 .016
Tolerance: 0.1 .004
Flat TM type
47.5
1.870
31
1.220
11.2
.441
10
.394
Schematic
Panel cutout
39.5 0.1
Faston 187
1.555 .004
28.5
1.122
R2.25
R.088
C O M N . O .
4.5
.177
Coil
2-4.5 0.1 dia.
2-.177 .004 dia.
Faston 250
6.8
Faston 187
39.5
1.555
N.O.
COM
.268
1.9
2.15
.085
8
15
.075
.315 .591
6.35
.250
0.8
0.5
.031
.020
Faston 250
1.5
9.9
.390
.059
8.2
.323
17.6
.693
2
16.8
.661
0.6
.079
.024
General tolerance: 0.4 .016
REFERENCE DATA
1. Coil temperature rise
2. Ambient temperature characteristics
Sample: JM1aN-TMP-DC24V, 5 pcs.
3. Operate/release time
Sample: JM1aN-TMP-DC24V, 5 pcs.
Place to be measured: Inside of coil
Ambient temperature: 25°C 77°F
14
13
12
11
60
50
40
30
20A
0A
30
20
Drop-out voltage
10
9
8
7
6
5
4
3
2
0
Operate time
10
Pick-up voltage
–40 –20
0
20 40 60 80
Ambient temperature, °C
–10
Max.
-
x
Min.
Release time
Max.
20
0
–20
–30
-
x
Min.
80
90 100 110 120 130
Coil applied voltage, %V
80
90 100 110 120 130
Coil applied Voltage, %V
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
JM
4. Life curve
100
50
250V AC
resistive load
10
5
10
15
20
Contact current, A
5-(1). 200 V AC electrical life test (200 V AC inverter dummy load)
Sample: JM1aN-TMP-DC12V, 6 pcs.
Load: Inrush 108 A, Steady 15 A,
Inverter dummy 200 V AC
Switching frequency: ON 5 s, OFF 5 s
Circuit
Contact welding: 0 time
Miscontact: 0 time
Change of pick-up and drop-out voltage
9
Pick-up voltage
8
7
Max.
-
x
70 µF
6
5
JM relay contact
Min.
Reactor
1,800 µF
Detection of welding
and miscontact
200 V AC
4
Drop-out voltage
1.9 Ω
3
2
1
Max.
-
x
Switch
(Welding detection time: 0.2 s)
Min.
0
3
6
No. of operations, ×104
5-(2). 100 V AC electrical life test (100 V AC inverter dummy load)
Sample: JM1aN-TMP-DC12V, 20 pcs.
Load: Inrush 224 A, Steady 20A,
Inverter dummy 100 V AC
Contact welding: 0 time
Miscontact: 0 time
Change of pick-up and drop-out voltage
9
Switching frequency: ON 10 s, OFF 10 s
Circuit
Pick-up voltage
8
Max.
7
JM relay contact
Reactor
-
x
6
5
2,000 µF
470 µF
470 µF
Detection of welding
and miscontact
100 V AC
Min.
4
Drop-out voltage
Max.
3
(Welding detection time: 0.2 s)
-
x
2
1
0
Min.
3
6
No. of operations, ×104
5-(3). Inrush 70 A, Steady 20 A, 250 V AC compressor dummy load
Sample: JM1aN-TMP-DC12V, 6 pcs.
Load: (Endurance) inrush 70 A cosϕ = 0.7 (0.3 s),
steady 20A pf = 0.9,
250V AC compressor dummy
(Overload) 80A cosϕ = 0.7, 250 V AC
No. of operations: (Endurance) 105 times
(Overload) 1,000 times (after
endurance test)
Contact welding: 0 time
Miscontact: 0 time
Change of pick-up and drop-out voltage
9
8
Pick-up voltage
7
Max.
-
6
5
x
Switching frequency: (Endurance) ON 1.5 s,
OFF 1.5 s
Min.
4
(Overload) ON 3 s,
Max.
Drop-out voltage
3
OFF 2 min., 57 s
-
x
Circuit (endurance)
Min.
2
1
0
12 V
JM relay contact
DC
Compressor
dummy load
device
3
5
7
10
Detection of welding
and miscontact
250 V AC
No. of operations, ×104
For Cautions for Use, see Relay Technical Information
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
相关型号:
©2020 ICPDF网 联系我们和版权申明