HX2-4.5V [NAIS]
Compact & Slim 2 Form C Non-polarized Relay; 紧凑型和超薄2 C型非极化继电器型号: | HX2-4.5V |
厂家: | NAIS(MATSUSHITA ELECTRIC WORKS) |
描述: | Compact & Slim 2 Form C Non-polarized Relay |
文件: | 总3页 (文件大小:61K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Compact & Slim 2 Form C
Non-polarized Relay
HX-RELAYS
FEATURES
• Compact size of (W) 7.4 × (L) 15.0 × (H)
9.4 mm (W) .291× (L) .591× (H) .370
inch.
7.4
• High-density mounting is possible
15.0
.591
.291
• High reliability
9.4
.370
The use of a gold-clad bifurcated struc-
ture for the movable contacts, and a low
gas material for the forming materials and
coil wiring ensures high contact reliability.
• Surge withstand voltage of 1,500 V
(between contact and coil)
Conforms to FCC Part 68.
mm inch
SPECIFICATIONS
Contact
Characteristics
Arrangement
2 Form C
Max. 100 mΩ
Initial insulation*1 resistance
Min. 1,000 MΩ (at 500 V DC)
Initial contact resistance
(By voltage drop 6 V DC 1 A)
Between contacts
750 V rms for 1 min.
Initial
breakdown
voltage
Between contact and
coil
1,000 V rms for 1 min.
Contact material
Gold-clad silver alloy
1 A 30 V DC, 0.3 A 125 V AC
Nominal switching
capacity (resistive load)
Between contacts sets
1,000 V rms for 1 min.
Temperature rise*2
Max. 60°C
Max. switching power
(resistive load)
Operate time*3
(at 20°C 68°F)
30 W (DC), 37.5 VA (AC)
Max. 6 ms (Approx. 4 ms)
Rating
Max. switching voltage
Max. switching current
Min. switching capability ❇1
110 V DC, 125 V AC
Release time(without diode)*3
(at 20°C 68°F)
Max. 5 ms (Approx. 3 ms)
1 A
1 mA 1 V DC
320 mW
107
Functional*4
Destructive*5
Min. 100 m/s2 {10G}
Min. 1,000 m/s2 {100G}
Shock resistance
Nominal operating power
Mechanical (at 180 cpm)
10 to 55 Hz
at double amplitude of 1.0 mm
Functional*6
Expected
life (min.
operations)
105
Vibration resistance
Electrical (at 20 cpm)
(1 A 30 V DC,
0.3 A 125 V AC resistive)
10 to 55 Hz
at double amplitude of 1.5 mm
Destructive
Ambient
temperature
–40 to +70°C
–40 to +158°F
Note:
❇1This value can change due to the switching frequency, environmental conditions,
Conditions for
opetation, transport
and storage*7
and desired reliability level, therefore it is recommended to check this with the ac-
tual load.
Remarks
Humidity
5 to 85% R.H.
Atmospheric
pressure
86 to 106 kPa
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:
1A.
Unit weight
Approx. 2g .07 oz
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 Half- wave pulse of sine wave: 11ms, detection time: 10µs
*5 Half- wave pulse of sine wave: 6ms
*6 Detection time: 10µs
*7 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61)
TYPICAL
ORDERING INFORMATION
APPLICATIONS
Ex. HX
2
3V
• Telephone exchange, transmission
equipment
• Communications devices
• Measurement devices
• Home appliances, and audio/visual
equipment
Contact arrangement
2: 2 Form C
Coil voltage(DC)
1.5, 3, 4.5, 5, 6, 9, 12, 24 V
Note: 2,500V Surge (Bellcore) type is also available.
Please consult us for details.
• Office equipment
183
HX
TYPES AND COIL DATA
Part No.
Normal
operating
current,
mA (±10%)
(at 20°C 68°F)
Pick-up
voltage,
V DC (max.)
Drop-out
voltage,
V DC (min.)
Coil
Nominal
operating
power,
mW
Max. allowable
voltage,
V DC
(at 70°C 158°F)
Standard
PC board
terminal
Contact
arrangement
Coil rating,
V DC
Resistance,
ohm (±10%)
(at 20°C 68°F)
(at 20°C 68°F) (at 20°C 68°F)
arrangement
1.5
3
HX2-1.5V
HX2-3V
HX2-4.5V
HX2-5V
HX2-6V
HX2-9V
HX2-12V
HX2-24V
1.13
2.25
3.38
3.75
4.5
0.15
0.3
0.45
0.5
0.6
0.9
1.2
2.4
214
107
7.0
28.1
63.3
78.1
112
320
320
320
320
320
320
320
320
1.65
3.3
4.5
5
71.1
64.0
53.6
35.6
26.7
13.3
4.95
5.5
2 Form C
6
6.6
9
6.75
9
253
9.9
12
24
450
13.2
26.4
18
1,800
Standard packing: Tube; 40 pcs.; Case : 1,000 pcs.
mm inch
DIMENSIONS
1. Standard PC board terminal type
PC board pattern (Bottom view)
Schematic (Bottom view)
10.16
15.00
.591
7.4
.400
8-1 dia
8-.039 dia
.291
1
3
4
5
8
2.54
.100
9.4
0.45
.370
5.08
.200
.018
12 10 9
3.5
2.54
.100
.138
0.25
.010
0.5
.020
5.08
.200
1.15
.138
5.08
.200
2.54
.100
General tolerance: ±0.3 ±.012
Tolerance: ±0.1 ±.004
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: HX2-12 V, 10 pcs.
100
90
200
DC load (cos ϕ = 1)
AC load (cos ϕ = 1)
3.0
2.0
80
100
50
Pick-up voltage
Drop-out voltage
70
60
50
40
30
20
10
0
Max.
Min.
1.0
30 V DC
resistive load
30
20
0.5
0.4
0.3
125 V AC
resistive load
0.2
Max.
Min.
10
0.2
0.4
0.6
0.8
1.0
1.2
20 30
50
100
200 300
100
500
1,000
No. of operations, ×104
Switching current, A
Switching voltage, V
4. Electrical life (1 A 30 V DC resistive load)
5. Coil temperature rise
Tested sample: HX2-12 V, 6 pcs.
Operating frequency: 20 cpm
Change of pick-up and drop-out voltage
100
Tested sample: HX2-12 V
Measured portion: Inside the coil
Ambient temperature: 25°C 77°F, 70°C 158°F
Change of contact resistance
100
70
1 A
70°C 158°F
0 A
90
80
70
90
80
70
60
50
40
30
20
10
Room
60
50
40
30
20
10
0
temperature
1 A
0 A
(25°C 77°F)
Pick-up voltage
Drop-out voltage
Max.
Min.
60
50
40
30
20
10
0
Max.
Min.
Max.
Min.
0
5
10
5
No. of operations, ×104
10
100 110 120 130 140 150
Coil applied voltage, %V
No. of operations, ×104
184
HX
6. Operate/release time characteristics
Tested sample: HX2-12V, 10 pcs.
7. Distribution of pick-up and drop-out voltage
Tested sample: HX2-12V, 50 pcs.
8. Ambient temperature characteristics
Tested sample: HX2-12V, 5 pcs.
6
5
4
–40
Drop-out
voltage
35
–30
–20
–10
30
Drop-out voltage
25
Pick-up voltage
20
Pick-up voltage
20 40 60 80
–40 –20
0
Set time
3
2
1
0
Max.
Min.
Ambient temperature, °C
15
10
5
–10
–20
–30
–40
Reset time
Max.
Min.
0
80
90
100 110 120
10 20 30 40 50 60 70 80 90 100
Coil applied voltage, %V
Ratio against the rated voltage, %V
9. Distribution of contact resistance
Tested sample: HX2-12V, 25 pcs. (25 × 4 contacts)
10.-(1) High frequency characteristics
Isolation characteristics
10.-(2) High frequency characteristics
Insertion loss characteristics
50
40
30
20
10
0
100
50
0.5
0.4
0.3
0.2
0.1
0
10
100
1,000
20
30
40
10
100
1,000
Frequency, MHZ
Contact resistance, mΩ
Frequency, MHZ
NOTES
1. Coil operating power
3. Packing style
• Packing direction
The relay is packed in a tube with the relay
orientation mark on the left side, as shown
in the figure below.
Take note of the relay orientation when
mounting relays on the printed circuit
board.
4. Automatic insertion
Pure DC current should be applied to the
coil.The wave form should be rectangular.
If it includes ripple, the ripple factor should
be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more than
10 ms to set/reset the latching type relay.
2. Cleaning
In automatic cleaning, cleaning with the
boiling method is recommended. Avoid ul-
trasonic cleaning which subject the relay
to high frequency vibrations. It may cause
the contacts to stick.
To maintain the internal function of the re-
lay, the chucking pressurre should not ex-
ceed the values below.
Chucking pressure in direction A:
9.8 N {1 kgf} or less
Chucking pressure in direction B:
9.8 N {1 kgf} or less
Chucking pressure in direction C:
4.9 N {500 gf} or less
Orientation (indicates PIN No. 1) stripe
C
B
A
Stopper
(gray)
Stopper
(green)
lt is recommended that a fluorinated hy-
drocarbon or other alcoholic solvent be
used.
Please chuck the
Avoid chucking the center of the relay.
portion.
The temperature range is –40 to +70°C
–40 to +158°F
For Cautions for Use, see Relay Technical Information (Page 48 to 76).
9/1/2000
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog
相关型号:
©2020 ICPDF网 联系我们和版权申明