R7FN-TS4 [MSYSTEM]
Remote I/O R7 Series FLEX NETWORK I/O MODULE;
| 型号： | R7FN-TS4 |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R7 Series FLEX NETWORK I/O MODULE |
| 文件： | 总6页 (文件大小：179K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R7FN-TS4
EX-FACTORY SETTING
Remote I/O R7 Series
/SET: Preset according to the Ordering Information Sheet
(No. ESU-7808-TS4)
FLEX NETWORK I/O MODULE
(Thermocouple input, 4 points, isolated)
Functions & Features
RELATED PRODUCTS
• PC configurator software (model: R7CON)
The configurator software is downloadable at M-System’s
web site.
• 4 points thermocouple input module for FLEX NETWORK
• Input sensor can be selected with the front DIP switches
for all channels.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
• Easy parameter setting of individual channels with M-
System's configurator software
FLEX NETWORK is registered trademark of Digital
Electronics Corporation in Japan.
• Screen editor software (model: GP-Pro EX)
Screen editor software GP-Pro EX (Ver.2.70 or higher) is
available.
115 (4.53)
For versions between 2.60 and 2.70, the driver must be
installed. The driver is downloadable at Digital Electronics
Corporation's web site. http://www.proface.co.jp/
53 (2.09)
GENERAL SPECIFICATIONS
Connection: M3 separable screw terminal (torque 0.5 N·m)
Solderless terminal: Refer to the drawing at the end of the
section.
54 (2.13)
mm (inch)
• Communication cable
MODEL: R7FN–TS4-R[1]
Recommended manufacture: Japan Solderless Terminal
MFG.Co.Ltd
ORDERING INFORMATION
• Code number: R7FN-TS4-R[1]
Specify a code from below for [1].
(e.g. R7FN-TS4-R/Q)
Applicable wire size: 0.2 to 0.5 mm
2
(AWG 26 to 22)
• Others
Recommended manufacture: Japan solderless terminal
MFG.Co.Ltd, Nichifu Co.,ltd
• Specify the specification for option code /Q
(e.g. /C01/SET)
Applicable wire size: 0.25 to 1.65 mm
2
(AWG 22 to 16)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (gray)
Isolation: Input 0 to input 1 to input 2 to input 3 to FLEX
NETWORK to power to FG
I/O TYPE
TS4: Thermocouple input, 4 points
Zero adjustments: Configurable via R7CON
Span adjustments: Configurable via R7CON
Conversion rate: Configurable via R7CON
Thermocouple setting: Configurable via the front DIP switch
or R7CON
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Burnout setting: Selectable between upscale (*) and
downscale with the front DIP switch
(*) Factory default setting
[1] OPTIONS
Linearization: Standard
blank: none
Cold junction compensation: CJC sensor attached to the
input terminals
/Q: Options other than the above (specify the specification)
Status indicator LED: PWR, RUN
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
(Refer to the instruction manual)
/C02: Polyurethane coating
/C03: Rubber coating
R7FN-TS4 SPECIFICATIONS
ES-7808-B Rev.0 Page 1/6
http://www.m-system.co.jp/
MODEL: R7FN-TS4
■Recommended solderless terminal
INPUT SPECIFICATIONS
Input resistance: 30 kΩ min.
3.3 (.13) max
Burnout sensing: 0.1 μA
BURNOUT
INDICATION (°C)
T/C
CONFORMANCE
RANGE (°C)
mm (inch)
Upscale
+1472
+1120
+1300
+ 500
1920
Downscale
-272
-272
-260
-272
24
K (CA)
-150 to +1370
-170 to +1000
-180 to +1200
-170 to + 400
400 to 1760
200 to 1760
0 to 1760
E (CRC)
J (IC)
FLEX NETWORK COMMUNICATION
Communication configuration: 1: N
Connection method: Multi-drop Connection
Communication method: Cyclic Time Division, half-duplex
Communication I/F: Differential, pulse transfer isolation
Error Check: Format, bit, CRC-12 verification
Max. Number of Nodes: 63 (1008 I/O points)
Required node: 4
T (CC)
B (RH)
R
-100
-100
-52
+1860
+1860
+2416
+1400
+ 700
+1000
+1496
+1860
S
C (WRe 5-26)
0 to 2315
N
-272
-252
-252
-52
-130 to +1300
-200 to +600
-200 to +900
0 to 1395
U
L
P (Platinel II)
(PR)
Network cable: Pro-face’s following cable
FN-CABLE2010-31-MS (10 m)
-52
0 to 1760
BURNOUT
INDICATION (°F)
CONFORMANCE
RANGE (°F)
FN-CABLE2050-31-MS (50 m)
T/C
FN-CABLE2200-31-MS (200 m)
Upscale
+2682
+2048
+2372
+932
Downscale
-458
-458
-436
-458
75
Transmission distance: 12 Mbps: 100 meters (328 ft)(*)
6 Mbps: 200 meters (656 ft)
K (CA)
-238 to +2498
-274 to +1832
-292 to +2192
-274 to +752
752 to 3200
392 to 3200
32 to 3200
E (CRC)
J (IC)
(*) Factory default setting
T (CC)
Station address: Rotary switch
B (RH)
3488
(Refer to the instruction manual)
R
-148
-148
-62
+3380
+3380
+4381
+2552
+1292
+1832
+2725
+3380
Terminating resistor: Built-in
S
C (WRe 5-26)
32 to 4199
N
-458
-422
-422
-62
-202 to +2372
-328 to +1112
-328 to +1652
32 to 2543
U
L
P (Platinel II)
(PR)
-62
32 to 3200
INSTALLATION
Current consumption
•DC: Approx. 90 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail (35 mm rail)
Weight: 200 g (0.44 lb)
PERFORMANCE
Conversion accuracy: ±1°C (±1.8°F) except ±2°C (±3.6°F)
for B, R, S, C, PR
Conversion rate: 250 msec. (*) or 500 msec. selectable
(*) Factory default setting
Converted data range:
• Engineering unit value (°C, K) × 10 (integer)
• Engineering unit value (°F)
Cold junction compensation error:
R7FN-TS4 SPECIFICATIONS
ES-7808-B Rev.0 Page 2/6
http://www.m-system.co.jp/
MODEL: R7FN-TS4
±1°C max. (at 25°C ±10°C)
±1.8°F max. (at 77°F ±18°F)
(±1.5°C or ±2.7°F for R, S, PR)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span
Response time: Conversion rate × 2 + 50 msec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input 0 to input
1 to inpu 2 to input 3 to FLEX NETWORK to power to FG)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
EXTERNAL VIEW
Operating Mode Setting DIP SW (SW1)
PC Configurator Jack
Station Address Setting Rotary SW
Status Indicator LED
ON
2 3 4 5 6 7 8
1
X10
8
X1
8
PWR RUN
CNFG.
STATION ADD.
4
5
6
7
10 11 12 13 14 15 16 17 18
1
2
3
1
2
3
4
5
6
7
8
9
FLEX NETWORK,
Power Supply Terminals
Input Terminals
CONNECTION DIAGRAMS
■ MASTER CONNECTION
Master Station
Slave Station
Slave Station
+
–
+
–
+
–
TR
TR
TR
Terminating
Resistor
TR
TR
TR
+
+
SHIELD
JP
JP
JP
JP
Terminating
Short Bar
–
–
FG
FG
Note: Be sure to use the terminator(s) located at both ends of the modules.
R7FN-TS4 SPECIFICATIONS
ES-7808-B Rev.0 Page 3/6
http://www.m-system.co.jp/
MODEL: R7FN-TS4
TERMINAL ASSIGNMENTS
■ INPUT TERMINAL ASSIGNMENT
10
11
12
13
14
NC
15
16
17
18
+IN0 –IN0 +IN1 –IN1
+IN2 –IN2 +IN3 –IN3
1
2
3
4
5
6
7
8
9
+CJ0 –CJ0 +CJ1 –CJ1
NC
+CJ2 –CJ2 +CJ3 –CJ3
NO. ID
FUNCTION
+CJ0 CJC + 0
–CJ0 CJC – 0
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
10 +IN0 T/C + 0
11 –IN0 T/C – 0
12 +IN1 T/C + 1
13 –IN1 T/C – 1
+CJ1 CJC + 1
–CJ1 CJC – 1
NC No connection
+CJ2 CJC + 2
–CJ2 CJC – 2
+CJ3 CJC + 3
–CJ3 CJC – 3
14
NC No connection
15 +IN2 T/C + 2
16 –IN2 T/C – 2
17 +IN3 T/C + 3
18 –IN3 T/C – 3
■ NETWORK, POWER SUPPLY TERMINAL ASSIGNMENT
4
5
6
7
-
TR+ TR +24V 0V
1
2
3
-
JP+ JP
FG
NO.
1
ID
JP+
JP–
FG
FUNCTION, NOTES
Terminating resistor
Terminating resistor
FG
2
3
4
TR+
TR–
+24V
0V
Network
5
Network
6
Power input (24V DC)
Power input (0V)
7
DATA CONVERSION
■ INPUT RANGE AND DATA CONVERSION (FACTORY DEFAULT SETTING)
Engineering unit value °C or K is multiplied by 10 and expressed in 16 bits. °F data is represented in engineering unit
value, without multiplication. Negative value is represented in 2’s complements.
• Input TYPE K Thermocouple
Converted Data, Decimal
Converted Data, Hex
Input Value
≤ -272°C
-150°C
-2720
-1500
13700
14720
F560
FA24
3584
3980
1370°C
≥ 1472°C
14720 (3980)
13700 (3584)
-272 -150
1370 1472
(°C)
-1500 (FA24)
-2720 (F560)
R7FN-TS4 SPECIFICATIONS
ES-7808-B Rev.0 Page 4/6
http://www.m-system.co.jp/
MODEL: R7FN-TS4
I/O DATA DESCRIPTIONS
■ ANALOG INPUT
• Di
• Do
15
0
0
15
0
0
ADD.n
CH0
CH1
Unused
Unused
15
15
ADD.n+1
15
0
0
15
15
0
0
ADD.n+2
CH2
CH3
Unused
Unused
15
ADD.n+3
The data is 16-bit binary.
Negative value is represented in 2’s complements.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
115 (4.53)
17 (.66)
54 (2.13)
DIN RAIL
35mm wide
4
5
6
7
10 11 12 13 14 15 16 17 18
1
2
3
1
2
3
4
5
6
7
8
9
30 (1.18)
[5 (.20)]
6 (.24)
6 (.24)
7–M3 SCREW
TERMINALS
for FLEX NETWORK, POWER
18–M3 SCREW
TERMINALS
for INPUT
R7FN-TS4 SPECIFICATIONS
ES-7808-B Rev.0 Page 5/6
http://www.m-system.co.jp/
MODEL: R7FN-TS4
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FG terminal to ground.
Caution: FG terminal is NOT a protective conductor terminal.
Isolation
Input Circuit
Input Circuit
Input Circuit
Input Circuit
10
11
1
+IN0
–IN0
+CJ0
–CJ0
4
5
TR+
TR–
Comm.
Circuit
INPUT 0
INPUT 1
INPUT 2
INPUT 3
1
2
3
6
7
JP+
JP–
2
12
13
3
+IN1
−IN1
+CJ1
−CJ1
FG
24V DC
0V
4
Input
Circuit
15
16
6
+IN2
–IN2
+CJ2
–CJ2
7
+IN3 17
–IN3 18
+CJ3
–CJ3
8
9
5
14
■ Input Connection Example
T/C
+
+INn
-INn
-
+
CJn
CJC
CENSOR
-CJ
n
Specifications are subject to change without notice.
R7FN-TS4 SPECIFICATIONS
ES-7808-B Rev.0 Page 6/6
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明