R7FN-YV2-R [MSYSTEM]
Remote I/O R7 Series FLEX NETWORK I/O MODULE;型号: | R7FN-YV2-R |
厂家: | M-SYSTEM |
描述: | Remote I/O R7 Series FLEX NETWORK I/O MODULE |
文件: | 总6页 (文件大小:170K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R7FN-YV2
EX-FACTORY SETTING
Remote I/O R7 Series
/SET: Preset according to the Ordering Information Sheet
(No. ESU-7808-YV2)
FLEX NETWORK I/O MODULE
(2 points DC voltage output, isolated)
Functions & Features
RELATED PRODUCTS
• PC configurator software (model: R7CON)
The configurator software is downloadable at M-System’s
web site.
• 2 points DC voltage output module for FLEX NETWORK
• Output range can be selected with the front DIP switches
for all channels.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
• Easy parameter setting of individual channels with M-
System's configurator software
FLEX NETWORK is registered trademark of Digital
Electronics Corporation in Japan.
• Screen editor software (model: GP-Pro EX)
Screen editor software GP-Pro EX (Ver.2.70 or higher) is
available.
115 (4.53)
For versions between 2.60 and 2.70, the driver must be
installed. The driver is downloadable at Digital Electronics
Corporation's web site. http://www.proface.co.jp/
53 (2.09)
GENERAL SPECIFICATIONS
Connection: M3 separable screw terminal (torque 0.5 N·m)
Solderless terminal: Refer to the drawing at the end of the
section.
54 (2.13)
mm (inch)
• Communication cable
MODEL: R7FN–YV2-R[1]
Recommended manufacture: Japan Solderless Terminal
MFG.Co.Ltd
ORDERING INFORMATION
• Code number: R7FN-YV2-R[1]
Specify a code from below for [1].
(e.g. R7FN-YV2-R/Q)
Applicable wire size: 0.2 to 0.5 mm
2
(AWG 26 to 22)
• Others
Recommended manufacture: Japan solderless terminal
MFG.Co.Ltd, Nichifu Co.,ltd
• Specify the specification for option code /Q
(e.g. /C01/SET)
Applicable wire size: 0.25 to 1.65 mm
2
(AWG 22 to 16)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (gray)
Isolation: Output 0 to output 1 to FLEX NETWORK to power
to FG
I/O TYPE
YV2: DC voltage output, 2 points
Zero adjustments: Configurable via R7CON
Span adjustments: Configurable via R7CON
Output range: Selectable with the front DIP SW or
configurable via R7CON
POWER INPUT
DC Power
R: 24 V DC
Output at the loss of communication:
Output hold (*), Output clear
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Selectable with the front DIP SW
(*) factory default setting
[1] OPTIONS
Status indicator LED: PWR, RUN
blank: none
(Refer to the instruction manual)
■Recommended solderless terminal
/Q: Options other than the above (specify the specification)
3.3 (.13) max
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
mm (inch)
/C03: Rubber coating
R7FN-YV2 SPECIFICATIONS
ES-7808-D Rev.0 Page 1/6
http://www.m-system.co.jp/
MODEL: R7FN-YV2
FLEX NETWORK COMMUNICATION
Communication configuration: 1: N
Connection method: Multi-drop Connection
Communication method: Cyclic Time Division, half-duplex
Communication I/F: Differential, pulse transfer isolation
Error Check: Format, bit, CRC-12 verification
Max. Number of Nodes: 63 (1008 I/O points)
Required node: 2
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
Network cable: Pro-face’s following cable
FN-CABLE2010-31-MS (10 m)
FUNCTIONS
Output hold function:
FN-CABLE2050-31-MS (50 m)
Output at the loss of communication is selectable from
output clear (fix the output at -15 % or approx. -11.5 V) and
output hold (last normally received data) with DIP switch.
At the startup, it outputs -15 % or approx. -11.5 V until the
communication is established and normal data is received.
FN-CABLE2200-31-MS (200 m)
Transmission distance: 12 Mbps: 100 meters (328 ft)(*)
6 Mbps: 200 meters (656 ft)
(*) Factory default setting
Station address: Rotary switch
(Refer to the instruction manual)
Terminating resistor: Built-in
OUTPUT SPECIFICATIONS
■ Narrow Span voltage
Output range: -1 – +1 V DC, 0 – 1 V DC, -0.5 – +0.5 V DC
Load resistance: 100 kΩ min.
■ Wide Span voltage
Output range: -10 – +10 V DC (*), -5 – +5 V DC, 0 – 10 V DC,
0 – 5 V DC, 1 – 5 V DC
(*) factory default setting
Load resistance: 100 kΩ min.
■ Operational range
Except -10 to +10 V DC: -15 to +115 % of output range
-10 to +10 V DC: Approx. -11.5 to +11.5 V DC
INSTALLATION
Current consumption
•DC: Approx. 100 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail (35 mm rail)
Weight: 200 g (0.44 lb)
PERFORMANCE
Conversion accuracy: ±0.1 %
Data range: 0 – 10000 of the output range
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Output delay time: ≤ 250 msec. (0 - 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (output 0 to
output 1 to FLEX NETWORK to power to FG)
R7FN-YV2 SPECIFICATIONS
ES-7808-D Rev.0 Page 2/6
http://www.m-system.co.jp/
MODEL: R7FN-YV2
EXTERNAL VIEW
Operating Mode Setting DIP SW (SW1)
PC Configurator Jack
Station Address Setting Rotary SW
Status Indicator LED
ON
2 3 4 5 6 7 8
1
X10
8
X1
8
PWR RUN
CNFG.
STATION ADD.
4
5
6
7
10
6
7
8
9
1
2
3
1
2
3
4
5
FLEX NETWORK,
Power Supply Terminals
Output Terminals
CONNECTION DIAGRAMS
■ MASTER CONNECTION
Master Station
Slave Station
Slave Station
+
–
+
–
+
–
TR
TR
TR
Terminating
Resistor
TR
TR
TR
+
+
SHIELD
JP
JP
JP
JP
Terminating
Short Bar
–
–
FG
FG
Note: Be sure to use the terminator(s) located at both ends of the modules.
TERMINAL ASSIGNMENTS
■OUTPUT TERMINAL ASSIGNMENT
6
7
8
9
10
VL1
NC
VH0
VL0
VH1
1
2
3
4
5
NC
COM0 COM0 COM1 COM1
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
NC No connection
COM0 Common 0
COM0 Common 0
COM1 Common 1
COM1 Common 1
6
7
8
9
NC No connection
VH0 Wide span volt. 0
VL0 Narrow span volt. 0
VH1 Wide span volt. 1
10 VL1 Narrow span volt. 1
R7FN-YV2 SPECIFICATIONS
ES-7808-D Rev.0 Page 3/6
http://www.m-system.co.jp/
MODEL: R7FN-YV2
■ NETWORK, POWER SUPPLY TERMINAL ASSIGNMENT
4
5
6
7
-
TR+ TR +24V 0V
1
2
3
-
JP+ JP
FG
NO.
1
ID
JP+
JP–
FG
FUNCTION, NOTES
Terminating resistor
Terminating resistor
FG
2
3
4
TR+
TR–
+24V
0V
Network
5
Network
6
Power input (24V DC)
Power input (0V)
7
DATA CONVERSION
■ OUTPUT RANGE AND DATA CONVERSION (FACTORY DEFAULT SETTING)
Discrete output data is converted into analog representations of 0 – 100% proportional to each scaled range.
Overrange output is possible from -15 to +115% of the nominal range.
When the signal exceeds the limit, the data is fixed at -15% or +115%.
(approx. -11.5 V or 11.5 V when the output range is -10 - +10 V)
• Ouputput Range 0 – 5V DC
Digital Value, Decimal
Degital Value, HEX
Output Value, Engineering Unit Output value, %
-1500
0
10000
11500
FA24
0
≤ -0.75V
0V
5V
-15%
0%
100%
115%
2710
2CEC
≥ 5.75V
(V)
5.75
5.0
-1500
(FA24)
0
-0.75
10000
(2710)
11500
(2CEC)
R7FN-YV2 SPECIFICATIONS
ES-7808-D Rev.0 Page 4/6
http://www.m-system.co.jp/
MODEL: R7FN-YV2
I/O DATA DESCRIPTIONS
■ ANALOG OUTPUT
• Di
• Do
15
0
0
15
0
ADD.n
Unused
CH0
15
15
0
ADD.n+1
CH1
Unused
The data is 16-bit binary.
Negative value is represented in 2’s complements.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
115 (4.53)
17 (.66)
54 (2.13)
DIN RAIL
35mm wide
4
5
6
7
6
7
8
9
10
1
2
3
1
2
3
4
5
[5 (.20)]
30 (1.18)
6 (.24)
6 (.24)
10–M3 SCREW
TERMINALS
for OUTPUT
7–M3 SCREW
TERMINALS
for FLEX NETWORK, POWER
R7FN-YV2 SPECIFICATIONS
ES-7808-D Rev.0 Page 5/6
http://www.m-system.co.jp/
MODEL: R7FN-YV2
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FG terminal to ground.
Caution: FG terminal is NOT a protective conductor terminal.
Isolation
Output Circuit
7
8
2
3
VH0
4
5
TR+
TR–
Comm.
Circuit
VL0
OUTPUT 0
COM0
COM0
1
2
3
6
7
JP+
JP–
Control
Circuit
Output Circuit
9
10
4
VH1
FG
VL1
24V DC
0V
OUTPUT 1
COM1
COM1
5
1
6
■ OUTPUT CONNECTION EXAMPLES
VHn
VLn
VHn
VLn
+
WIDE SPAN
VOLTAGE
+
-
NARROW SPAN
VOLTAGE
COMn
COMn
-
Specifications are subject to change without notice.
R7FN-YV2 SPECIFICATIONS
ES-7808-D Rev.0 Page 6/6
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明