R5H-DS1AW [MSYSTEM]
Remote I/O R5 Series 4 â 20 mA INPUT MODULE;型号: | R5H-DS1AW |
厂家: | M-SYSTEM |
描述: | Remote I/O R5 Series 4 â 20 mA INPUT MODULE 输入元件 |
文件: | 总3页 (文件大小:113K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R5-DS1A
Remote I/O R5 Series
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R5-BS)
I/O: Euro type connector terminal
4 – 20 mA INPUT MODULE
(2-wire transmitter excitation supply;
re-transmitted output)
(Applicable wire size: 0.2 – 2.5 mm
2
(AWG24 - 12),
stripped length 7 mm)
18 (.71)
Internal power: Via the base (model: R5-BS)
Isolation: Input to output to internal bus or internal power
Zero/Span adj. mode selector: Rotary switch; monitor mode,
adj. mode and simulated output mode selectable
RUN indicator: Bi-color (red/green) LED;
2
3
4
1
5
0
8
7 6
9
90
(3.54)
Red when the bus A operates normally;
Green when the bus B operates normally;
96.5
(3.80)
Amber when both buses operate normally.
mm (inch)
SUPPLY OUTPUT
MODEL: R5–DS1A[1][2]
Output voltage: 24 – 29 V DC with no load
Current rating: ≤ 22 mA DC
• Shortcircuit Protection
ORDERING INFORMATION
• Code number: R5-DS1A[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R5-DS1AW/Q)
Current limited: 30 mA max.
Protected time duration: No limit
• Specify the specification for option code /Q
(e.g. /C01)
INPUT SPECIFICATIONS
■ DC Current: 4 – 20 mA DC
Input resistance: 250 Ω resistor incorporated
NO. OF CHANNELS
1: 1 channel
OUTPUT SPECIFICATIONS
Operational range: Approx. 0 – 24 mA DC
OUTPUT
Current
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 100 g (3.53 oz)
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
[1] COMMUNICATION MODE
S: Single
W: Dual
PERFORMANCE
Conversion accuracy
[2] OPTIONS
blank: none
Input: ±0.05 %
Output: ±0.1 % of the retransmitted range + input
conversion accuracy
/Q: With options (specify the specification)
Data range: 0 – 10000 of the input range
Data allocation: 1
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Temp. coefficient
Input: ±0.015 %/°C (±0.008 %/°F)
Output: ±0.02 %/°C (±0.01 %/°F)
Response time: ≤ 0.2 sec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input to output
to internal bus or internal power)
/C02: Polyurethane coating
/C03: Rubber coating
R5-DS1A SPECIFICATIONS
ES-7562 Rev.7 Page 1/3
http://www.m-system.co.jp/
MODEL: R5-DS1A
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
FUNCTIONS
• Zero/Span Adjustment Modes
Monitor Mode
Re-transmits the input signal as output in proportion.
Output 0 % Adjustment Mode
Adjusts the 0 % output signal using the front UP/DOWN
buttons, in monitoring the output value with a multimeter.
SW1 through SW3 switch the internal increments by 1, 5
and 10.
Output 100 % Adjustment Mode
Adjusts the 100 % output signal using the front UP/DOWN
buttons, in monitoring the output value with a multimeter.
SW4 through SW6 switch the internal increments by 1, 5
and 10.
Simulated Output Mode
Outputs the simulated signals of 0 %, 50 % and 100 %.
• How to Operate
1) Start up in Monitor Mode (SW position = 0) and wait for 2
or 3 seconds.
2) Switch to another mode and go through the adjustments.
3) Reset the switch to the position ‘0’ so that the new
setting is stored in the internal memory.
EXTERNAL VIEW
RUN
RUN LED
Zero/Span Adj.
Mode Selector
UP
DOWN
UP Button
DOWN Button
4
1
5
2
6
3
Euro Type
Connector Terminals
R5-DS1A SPECIFICATIONS
ES-7562 Rev.7 Page 2/3
http://www.m-system.co.jp/
MODEL: R5-DS1A
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
LOCKING CLAMP
18 (.71)
6.5
90 (3.54)
(.26)
4
1
5
2
6
3
POSITIONING GUIDE
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
RUN LED
+
2
Isolation
150Ω
100Ω
INTERNAL BUS A
Communication
Circuit
INPUT
INTERNAL BUS B*
–
+
3
1
2W-XMTR EXC
Control
Circuit
Excitation
Supply
INTERNAL POWER
OUTPUT
Output Driver
4
5
6
+
–
UP/DOWN
BUTTONS
ROTARY SW
*For dual redundant communication.
■ When Used as DC Supply
■ When Used as Current Input
2-WIRE
TRANSMITTER
–
2
+ 2
+
150Ω
100Ω
150Ω
INPUT
100Ω
3
1
– 3
–
+
+
+ 1
Specifications are subject to change without notice.
R5-DS1A SPECIFICATIONS
ES-7562 Rev.7 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明