R5H-RS1A1W [MSYSTEM]

High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE;


型号：	R5H-RS1A1W
厂家：	M-SYSTEM
描述：	High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE 输入元件
文件：	总6页 (文件大小：180K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R5H-RS

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

High Accuracy Remote I/O R5H Series

4-WIRE RTD INPUT MODULE

18 (.71)

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base

(model: R5-BSx)

(3.54)

Input: Euro type connector terminal

Wire size AWG24-12 (0.2 – 2.5 mm )

Power supply: Via the base (model: R5-BSx)

Isolation: Input to internal power

96.5

(3.80)

mm (inch)

Temperature unit: °C

Burnout protection: Upscale standard; downscale selectable

using the PC Configurator.

MODEL: R5H-RS1[1][2][3]

Linearization: Standard

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

ORDERING INFORMATION

• Code number: R5H-RS1[1][2][3]

Specify a code from below for each [1] through [3]

(e.g. R5H-RS1A1W)

INPUT SPECIFICATIONS

Maximum leadwire resistance: 10 Ω per wire

Sensing current: ≤ 1 mA

NO. OF CHANNELS

1: 1 channel

Temperature range: 0 – 100°C, 0 – 300°C

Value at burnout: -274 – 323°C

[1] INPUT RTD (4-wire)

A: Pt 100

Reference resistance factory setting

B: Pt 200

Pt 100: Rt = Ro (1 + At + Bt

Refer to ‘Reference resistance factory setting’ under‘Input’

specifications for more information.

where

A = 3.9083 × 10–3 [°C–1

]

B = -5.775 × 10–7 [°C–2

]

Ro = 100 [Ω]

[2] TEMPERATURE RANGE

1: 0 – 100°C

IEC 751-1995 (JIS C1604-1997)

Pt 200: Same equation except Ro = 200 [Ω]

3: 0 – 300°C

INSTALLATION

Current consumption: 50 mA (21 V DC from power supply

[3] COMMUNICATION MODE

S: Single

module)

W: Dual

Operating temperature: 20 to 40°C (68 to 104°F)

Operating humidity: 30 to 80 % RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BSx)

Weight: 100 g (3.53 oz)

RELATED PRODUCTS

•Remote I/O R5 Series

Base (model: R5-BS)

Power Supply Module (model: R5-PS)

Network Module (model: R5-Nx)

PERFORMANCE

Blank Filler Module (model: R5-DM)

Temperature range 0 – 100°C

Resolution: ±0.01°C @ 25 ±3°C

Conversion accuracy: ±0.03°C @ 25 ±3°C

Temperature range 0 – 300°C

Resolution: ±0.01°C @ 25 ±3°C

Please refer to the data sheet for the respective models for

detailed information about the software and I/O modules.

•PC configurator software (model: R5HCFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

http://www.m-system.co.jp/

R5H-RS SPECIFICATIONS

ES-6109 Rev.5 Page 1/6

MODEL: R5H-RS

Conversion accuracy: ±0.1°C @ 25 ±3°C

Data range: Engineering unit value × 100 (integer)

Data allocation: 1

Temp. coefficient: ±0.004 %/°C

Response time: ≤ 0.5 sec.

Burnout response: ≤ 10 sec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(input to internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

EXTERNAL VIEW

RUN

RUN LED

Euro Type

Conector Terminals

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

LOCKING CLAMP

18 (.71)

6.5

90 (3.54)

(.26)

POSITIONING GUIDE

http://www.m-system.co.jp/

R5H-RS SPECIFICATIONS

ES-6109 Rev.5 Page 2/6

MODEL: R5H-RS

MOUNTING REQUIREMENTS unit: mm (inch)

■ BASE

90 (3.54)

16.5

(.65)

[5 (.20)]

DIN RAIL

MOUNTING

(35 mm width)

DIM.

MODEL

R5-BS04

R5-BS05

157 (6.18)

R5-BS08

R5-BS09

231 (9.09)

379 (14.92)

R5-BS16

■ 4 OR 5 I/O MODULE TYPE

137 (5.39)

4–M4 SCREW

*Working space required for mounting/unmounting the modules.

■ 8 OR 9 I/O MODULE TYPE

211 (8.31)

4 – M4 SCREW

*Working space required for mounting/unmounting the modules.

■ 16 I/O MODULE TYPE

359 (14.13)

4.5

5–M4 SCREW

(.18)

*Working space required for mounting/unmounting the modules.

http://www.m-system.co.jp/

R5H-RS SPECIFICATIONS

ES-6109 Rev.5 Page 3/6

MODEL: R5H-RS

MOUNTING

■ MOUNTING DIRECTION

The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise, may

shorten the product’s life expentation or deteriorate its performance.

DOWN

■ VENTILATION & MAINTENANCE SPACE

Maintain sufficient ventilation space. Do not mount the unit directly above devices which radiate great heat such as heaters,

transformers or resistors.

Maintenance space is also required above and below the unit.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

RUN LED

Isolation

RTD

BUS A

Control

Circuit

Communication

Circuit

BUS B*

INTERNAL POWER

*For dual redundant communication.

SYSTEM DESCRIPTIONS

■ GENERAL

The R5H Series Remote I/O consists of a power supply module, network interface module(s), I/O module(s) and a backplane

(base). An extender base for an additional power supply module is available.

• Power Supply Module

Converts AC or DC power inputs for use in the network modules, I/O modules and for exciting discrete I/O.

• Communication Module

Converts data between the open network fieldbus (DeviceNet, etc.) and the internal communication bus, functioning as a

http://www.m-system.co.jp/

R5H-RS SPECIFICATIONS

ES-6109 Rev.5 Page 4/6

MODEL: R5H-RS

Gateway between two buses.

• I/O Module

The model R5H-RS is a high accuracy 4-wire RTD input module. Performs A/D conversion of field analog inputs; D/A conversion

of data received through the internal bus into analog/discrete outputs.

Temperature input is converted into signed binary data which equals 100 times its engineering unit value (°C). e.g. 25.53°C

is converted to 2553.

• Base

Backplane with communications and power supply buses.

An extender base is available for an additional power supply module for dual redundancy.

The R5-BS04, -BS08 and -BS16 can mount two network modules for dual redundant communication. Single mode is also usable.

The R5-BS05 and -BS09 can mount only one network module for single communication mode only.

■ SINGLE COMMUNICATION MODE

When the single communication mode is employed, the input modules send out via the internal bus analog inputs to the

network module. The network module outputs the data to the field bus.

■ DUAL COMMUNICATION MODE

A dual redundant communication system can be easily achieved by employing two network modules and using dual

communication type I/O modules (model suffix code "W").

Each I/O module is equipped with two independent communication ports, which are connected to the separate network

modules.

Input modules continuously respond to request-to-send from the both lines. This secures two independent communications.

■ HOT INSERTION/REMOVAL OF I/O MODULES

Each I/O and network module has an independent CPU. Data is renewed by serial communications between modules.

Therefore no momentary lapse or bumping of analog output occurs when switching communication buses in the dual

communication mode.

Furthermore, removing or replacing modules does not affect other modules on the same backplane. It is possible to replace

them without removing the power supply. However, replacing multiple modules at once may greatly change line voltage

levels. We recommend that you replace them one by one.

PROFIBUS Standard requires that all outputs be turned off when turning the power supply on. Therefore remove the power

before replacing the PROFIBUS modules.

■ USABLE R5 MODULES

• Network Interface Module

R5-ND1: DeviceNet

R5-NM1: Modbus

R5-NC1: CC-Link

R5-NP1: PROFIBUS-DP

R5-NE1: Ethernet (Modbus/TCP)

R5-NF1: T-Link

• Base

R5-BS04: 4 I/O modules

R5-BS05: 5 I/O modules (single communication mode)

R5-BS08: 8 I/O modules

R5-BS09: 9 I/O modules (single communication mode)

R5-BS16: 16 I/O modules

R5-EX1: Extender base for Power Supply Module

• Power Supply Module

R5-PSK: 100 – 120 V AC

R5-PSL: 200 – 240 V AC

R5-PSR: 24 V DC

• Blank Filler Module

R5-DM: Blank filler

http://www.m-system.co.jp/

R5H-RS SPECIFICATIONS

ES-6109 Rev.5 Page 5/6

MODEL: R5H-RS

Mount Input Modules at odd number slots, and Blank Filler Modules at even number slots. The R5 series I/O modules cannot

be mixed with the R5H series.

■ R5-BS04, -BS08, -BS16

•Single Communication Mode (one Network Module)

•Dual Communication Mode (two Network Modules)

Internal Communication

Bus

Internal Communication

Network Modules Bus

Power Module

Network Module

Power Module

Input & Blank Filler Modules

R5–PSx

R5–

ND1

R5H R5–DM R5H R5–DM R5H R5–DM R5H R5–DM

R5–PSx

R5–

ND1

R5–

R5H R5–DM R5H R5–DM R5H R5–DM R5H R5–DM

–RS –RS –RS

–RS

ND1 –RS

Power Input Network Bus A

I/O Signals

Power Input

Network Buses

I/O Signals

•Dual Redundant Power Supply

An extender base is available for an additional power supply module for dual redundancy.

Dual mode I/O modules can be used in single mode, while the communication bus B does not operate if single mode modules

are used in dual mode.

■ R5-BS05, -BS09

•Single Communication Mode (one Network Module)

Power Module

Network Module

Input & Blank Filler Modules

R5–PSx

R5–

R5H R5–DM R5H R5–DM R5H R5–DM R5H R5–DM R5H

–RS –RS –RS –RS

ND1 –RS

Power Input

Network Bus

I/O Signals

Specifications are subject to change without notice.

http://www.m-system.co.jp/

R5H-RS SPECIFICATIONS

ES-6109 Rev.5 Page 6/6

R5H-RS1A1W [MSYSTEM]

相关型号：

R5H-RS1A3S

R5H-RS1A3W

R5H-RS1B1S

R5H-RS1B1W

R5H-RS1B3S

R5H-RS1B3W

R5H30211

R5J100

R5J100E

R5J10K

R5J10R

R5J10RE