1A466 [MITEL]
Resonant Cavity LED(Datacom, General Purpose); 谐振腔LED（数据通信，通用）
| 型号： | 1A466 |
| 厂家： | 
MITEL NETWORKS CORPORATION |
| 描述： | Resonant Cavity LED(Datacom, General Purpose) |
| 文件： | 总9页 (文件大小：197K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PPRROODDUUCCTT IINNFFOORRMMAATTIIOONN
1A466
Datacom, General Purpose
650nm
Resonant Cavity LED
This unique Resonant Cavity
Surface-Emitting LED (RECLED) is
designed for optical communications
over Plastic Optical Fiber (POF) in
applications such as IEEE1394 and
ATM. It is also well suited for appli-
cations where visible light is
required, such as in sensing and posi-
tioning.
Optical and Electrical Characteristics (25° C Case Temperature)
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
W
W IF=30mA
deg
MHz IF=30mA
Fiber-Coupled Power
P
500
700
50
IF=30mA (Note 1)
fiber
Optical Power
P
o
Beam Divergence
⌰
Full Width Half Maximum
Bandwidth
f
200
c
(3dB
)
el
Peak Wavelength
640 650 660 nm IF=30mA
p
Spectral Width (FWHM)
Forward Voltage (Fig.5)
⌬
4
nm IF=30mA
IF=30mA
VF
2.3
V
Note 1: Fiber: POF 980/1000m Step Index, NA=0.3. An external glass ball lens is required.
Absolute Maximum Ratings
PARAMETER
SYMBOL
LIMIT
Storage Temperature
T
-55 to +125ЊC
stg
Operating Temperature (derating: Fig.4)
Electrical Power Dissipation (derating: Fig.4)
Continuous Forward Current (fр10 kHz)
Peak Forward Current (duty cycleр50%, fу1 MHz)
Reverse Voltage
Top
0 to +70ЊC
130 mW
50 mA
P
tot
Ø4.7
Ø2.5
IF
IFRM
VR
3.7
85 mA
1.5 V
14
Soldering Temperature (2mm from the case for 10 sec)
T
260ЊC
sld
0.4
CASE
Thermal Characteristics
PARAMETER
SYMBOL MIN.
TYP.
MAX.
UNIT
ANODE
CATHODE
Thermal Resistance - Infinite Heat Sink
R
200
ЊC/W
thjc
thja
Thermal Resistance -No Heat Sink
Temp. Coefficient -Wavelength
R
500
TBD
TBD
ЊC/W
nm/ЊC
dB
2.5
5.4
d/dT
BOTTOM VIEW
j
Optical Power - Variation 0 to 70ЊC
⌬P
The chip is isolated from the case.
TO-46 Package With Flat Window
13624.11 1998-02-04
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia: Tel (65) 293 5312 Fax (65) 293 8527
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
Clip for SC-2A
R
1.00
3.3000
5.6000
80,000
20.8200
0.5000
10,2500
10.3000
4.9500
0.5000
4.5000
5.0800
3.6450
Clip for Pigtail-3A
10.70
0.50
10.30
10.25
4.95
0.50
4.50
0.85
5.08
3.65
PRODUCT INFORMATION
ST-2A
Emitter or Detector in ST® Package
Package
Mitel emitters and detectors can be
provided in this low-profile ST®
package. The device is electrically
isolated from the ST® receptacle to
facilitate electrical connection. And
optimum fiber-coupled power or
responsivity is ensured by active
alignment against the fiber.
Absolute Maximum Ratings
PARAMETER
SYMBOL
LIMIT
Operating & Storage Temperature
T
, T
-40 to +85ЊC
stg op
ST-2A (Note 1)
Note 1: Temperature range can be extended to -55° to +125°C on request.
Thermal Characteristics
PARAMETER
SYMBOL MIN.
TYP.
MAX.
UNIT
Thermal Resistance -Infinite Heat Sink
(Note 2)
R
40
ЊC/W
thcc
Thermal Resistance -No Heat Sink
R
200
ЊC/W
ЊC/W
thca
(Note 2)
Thermal Resistance - On PC Board
Rthca
80
(Note 2)
Note 2: Add R
thjc
for emitter or detector to estimate the total thermal resistance.
2-56 UNC - 2B
max.0.5
3/8"-32 UNEF
FIBER
END
0.006
Ø2.502
+0.01
0
Ø2.5
+0
7.89
-0.004
7.6
3.9
5.4
MATING FERRULE*
min.12
20.1
(not included)
*
The fiber-coupled power/responsivity is guaranteed to meet the LED/PIN data sheet - provided a ferrule meeting this specification is used.
All Dimensions in mm
Mechanical Outline of Diode in ST-2A Housing
(ST is a registered trademark of AT&T)
103326 1994-09-20
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia: Tel (65) 293 5312 Fax (65) 293 8527
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
PRODUCT INFORMATION
SMA-2A
Emitter or Detector in SMA Package
Package
Mitel emitters and detectors can be
provided in this low-profile SMA
package. The device is electrically
isolated from the SMA receptacle to
facilitate electrical connection. And
optimum fiber-coupled power or
responsivity is ensured by active
alignment against the fiber.
Absolute Maximum Ratings
PARAMETER
SYMBOL
LIMIT
Operating & Storage Temperature
SMA-2A (Note 1)
T
, T
-40 to +85ЊC
stg op
Note 1: Temperature range can be extended to -55° to +125°C on request.
Thermal Characteristics
PARAMETER
SYMBOL MIN.
TYP.
MAX.
UNIT
Thermal Resistance -Infinite Heat Sink
(Note 2)
R
40
ЊC/W
thcc
Thermal Resistance -No Heat Sink
R
200
ЊC/W
ЊC/W
thca
(Note 2)
Thermal Resistance - On PC Board
Rthca
80
(Note 2)
Note 2: Add
R
for emitter or detector to estimate the total thermal resistance.
thjc
2-56 UNC - 2B
max.0.5
FIBER
END
Ø3.176
+0.01
0
0.006
9.8 ± 0.03
3.9
5.7
7.2
MATING FERRULE*
(not included)
min.12
15.2
All Dimensions in mm
The fiber-coupled power/responsivity is guaranteed to meet the LED/PIN data sheet - provided a ferrule meeting this specification is used.
*
Mechanical Outline of Diode in SMA-2A Housing
103325 1994-09-20
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia: Tel (65) 293 5312 Fax (65) 293 8527
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
PRODUCT INFORMATION
SC-2A
Emitter or Detector in SC Package
Package
Mitel emitters and detectors can be
provided in this low-profile SC pack-
age. The device is electrically isolat-
ed from the SC receptacle to facil-
itate electrical connection. And opti-
mum fiber-coupled power or respon-
sivity is ensured by active alignment
against the fiber..
Absolute Maximum Ratings
PARAMETER
SYMBOL
LIMIT
Operating & Storage Temperature
T
, T
-40 to +85ЊC
stg op
Thermal Characteristics
PARAMETER
SYMBOL MIN.
TYP.
MAX.
UNIT
Thermal Resistance -Infinite Heat Sink
R
40
ЊC/W
thcc
thca
(Note 1)
Thermal Resistance -No Heat Sink
(Note 1)
R
200
ЊC/W
ЊC/W
Thermal Resistance - On PC Board
Rthca
125
(Note 1)
Note 1: Add
R
for emitter or detector to estimate the total thermal resistance.
thjc
2.5
12
Ø2.3
0.006
FIBER
END
Ø2.5
+0
7.95
-0.004
MATING FERRULE*
(not included)
8.9
min. 12
18
All Dimensions in mm
*
The fiber-coupled power/responsivity is guaranteed to meet the LED/PIN data sheet - provided a ferrule meeting this specification is used.
Mechanical Outline of Diode in SC-2A Housing
105967 1994-09-20
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia: Tel (65) 293 5312 Fax (65) 293 8527
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
PRODUCT INFORMATION
Pigtail-3A
Emitter or Detector in Pigtail Package
Package
Mitel emitters and detectors can be
provided in this pigtail package with
a wide selection of fiber types. The
device is electrically isolated from
the pigtail receptacle to facilitate
electrical connection. And optimum
fiber-coupled power or responsivity
is ensured by active alignment
against the fiber. A special design
maximizes the return loss for detec-
tors in this package.
Absolute Maximum Ratings
PARAMETER
SYMBOL
LIMIT
Operating & Storage Temperature (Note 1 & 2)
T
, T
-40 to +85ЊC
stg op
Note 1: Temperature range can be extended to -55/+125ЊC on request.
Note 2: Temperature range may be limited by the specification of the fiber.
Thermal Characteristics
PARAMETER
SYMBOL MIN.
TYP.
MAX.
UNIT
Thermal Resistance - Infinite Heat Sink
(Note 3)
R
25
ЊC/W
thcc
Thermal Resistance - No Heat Sink
R
250
ЊC/W
ЊC/W
thca
(Note 3)
Thermal Resistance -On PC-Board
(Note 3)
R
120
thca
Note 3: Add
R
for LED to estimate the total thermal resistance.
thjc
Optical Characteristics
PARAMETER
SYMBOL MIN.
TYP.
MAX.
UNIT
Return Loss 10/125m fiber
(PIN only)
RL
40
55
dB
MARKING
Ø6.00
min.12
13
All Dimensions in mm
Mechanical Outline of Diode in PIGTAIL-3A Housing
105429 1997-07-03
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia: Tel (65) 293 5312 Fax (65) 293 8527
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
PRODUCT INFORMATION
FC-2A
Emitter or Detector in FC Package
Package
Mitel emitters and detectors can be
provided in this low-profile FC pack-
age. The device is electrically isolat-
ed from the FC receptacle to facil-
itate electrical connection. And opti-
mum fiber-coupled power or respon-
sivity is ensured by active alignment
against the fiber.
Absolute Maximum Ratings
PARAMETER
SYMBOL
LIMIT
Operating & Storage Temperature
T
, T
-40 to +85ЊC
stg op
FC-2A (Note 1)
Note 1: Temperature range can be extended to -55° to +125°C on request.
Thermal Characteristics
PARAMETER
SYMBOL MIN.
TYP.
MAX.
UNIT
Thermal Resistance - Infinite Heat Sink
(Note 2)
R
40
ЊC/W
thcc
Thermal Resistance - No Heat Sink
R
200
ЊC/W
ЊC/W
thca
(Note 2)
Thermal Resistance - On PC Board
Rthca
80
(Note 2)
Note 2: Add
R
for emitter or detector to estimate the total thermal resistance.
thjc
min.12
5.6
2.0
5.50
Ø 2.2
0.006
7.95
FIBER
END
Ø2.5
+0
M8x0.75 Thread
-0.004
MATING FERRULE*
(not included)
max. 0.5
9.2
*
The fiber-coupled power/responsivity is guaranteed to meet the LED/PIN data sheet - provided a ferrule meeting this specification is used.
All Dimensions in mm
Mechanical Outline of Diode in FC-2A Housing
105515 1994-09-20
America: Tel 1-800-96MITEL Fax (613) 592-6909
Asia: Tel (65) 293 5312 Fax (65) 293 8527
Europe: Tel (46) 8 58 02 45 00 Fax (46) 8 58 02 01 10
Tel (44) 1291 436180 Fax (44) 1291 436771
http://www.mitelsemi.com
World Headquarters - Canada
Tel: +1 (613) 592 2122
Fax: +1 (613) 592 6909
North America
Tel: +1 (770) 486 0194
Fax: +1 (770) 631 8213
Asia/Pacific
Tel: +65 333 6193
Fax: +65 333 6192
Europe, Middle East,
and Africa (EMEA)
Tel: +44 (0) 1793 518528
Fax: +44 (0) 1793 518581
Information relating to products and services furnished herein by Mitel Corporation or its subsidiaries (collectively “Mitel”) is believed to be reliable. However, Mitel assumes no
liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of
patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or
service conveys any license, either express or implied, under patents or other intellectual property rights owned by Mitel or licensed from third parties by Mitel, whatsoever.
Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Mitel, or non-Mitel furnished goods or services may infringe patents or
other intellectual property rights owned by Mitel.
This publication is issued to provide information only and (unless agreed by Mitel in writing) may not be used, applied or reproduced for any purpose nor form part of any order or
contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this
publication are subject to change by Mitel without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or
service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific
piece of equipment. It is the user’s responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or
data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in
any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Mitel’s
conditions of sale which are available on request.
M Mitel (design) and ST-BUS are registered trademarks of MITEL Corporation
Mitel Semiconductor is an ISO 9001 Registered Company
Copyright 1999 MITEL Corporation
All Rights Reserved
Printed in CANADA
TECHNICAL DOCUMENTATION - NOT FOR RESALE
相关型号：
1A4G
MINIATURE GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER (VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)
PANJIT
©2020 ICPDF网 联系我们和版权申明