WED7P1024CFA8001C25 [MICROSEMI]
Flash Card, 64MX16, 300ns, CARD-50;型号: | WED7P1024CFA8001C25 |
厂家: | Microsemi |
描述: | Flash Card, 64MX16, 300ns, CARD-50 内存集成电路 |
文件: | 总11页 (文件大小:260K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
WED7PxxxCFA80xxC25
White Electronic Designs
CompactFlashTM Card
FEATURES
DESCRIPTION
Fully compatible with PC Card Standard &
The WEDC CompactFlash™ Card consists of a
CompactFlash™ Controller, which supports Toshiba/
Samsung NAND type flash. The CompactFlash™
Card meets CFA specification V1.4, and provides error
correcting code (ECC) reliability to detect and correct
errors automatically.
CFA(Compact Flash Association) Standard.
Support 3 variations of mode access
• I/O Card Mode
• Memory Card Mode
• True- IDE Mode
* This product is subject to change without notice.
+5.5V / +3.0V single power supply.
Internal Error Correction Logic
• Data Interleave to 2 for each 256 Bytes.
Notes: CompactFlash™ is a trademark of SanDisk Corporation and is licensed royalty-
free to the CFA, which in turn will license it royalty-free to CFA members.
CFA: CompactFlash™ Association.
• Error Correction of 1 Byte random error per 128
Bytes of data.
• Automatic on-the-fly, in-buffer error correction.
Compatible with all PC Card Service and Socket
Service.
Integrated PC Card attribute memory of 256
Bytes(CIS).
4 PC Card function register support.
Support Host-side Write Protect.
Automatic wake up from power-down on host reset
or command write.
Sector data transfers without microprocessor
intervention.
Operation Environment
• Temperature — 0°C ~ 65°C
• Humidity — 8% ~ 95%
PRODUCT TYPES
Card Density
32MB
Model No.
7P032CFA80xxC25
7P064CFA80xxC25
7P128CFA80xxC25
7P256CFA80xxC25
7P512CFA80xxC25
7P1024CFA80xxC25
7P2048CFA80xxC25
7P4G0CFA80xxC25
64MB
128MB
256MB
512MB
1024MB
2048MB
4096MB
xx = Housing
00 = WEDC logo
01 = No logo
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
1
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
BLOCK DIAGRAM
D0 to D15
BVD2/1SPKR/DASP#
A0 to A10
Data Bus
FAD [7:0]/FBD[7:0]
CE1#, CE2#
OE#, ATASEL#
WE#
Control Signal
FCE/7..01
Flash
Memory
IORD#
IOWR#
REG#
Controller
RESET/RESET#
CSEL#
RDY/BSY#/IREQ#/INTRQ
WP/IOIS16#
INPACK#
BVD1/STSCHG#/PDIAG#
WAIT#/IORDY
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
2
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
PIN ASSIGNMENTS AND PIN TYPE
PC Card Memory Mode
PC Card I/O Mode
True IDE Mode4
Pin
Num
Signal
Name
Pin
Type
In ,Out
Type
Pin
Num
Signal
Name
Pin
Type
In ,Out
Type
Pin
Num
Signal
Name
Pin
Type
In ,Out
Type
1
2
3
4
5
6
7
8
GND
D03
D04
D05
D06
D07
CE1#
A10
OE#
A09
A08
A07
VCC
A06
A05
A04
A03
A02
Ground
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I3U
I1Z
I3U
I1Z
I1Z
I1Z
Power
I1Z
I1Z
I1Z
I1Z
I1Z
I1Z
I1Z
I1Z, OZ3
I1Z, OZ3
I1Z, OZ3
OT3
Ground
Ground
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I3U
Ground
I3U
I3U
I3U
OT1
1
2
3
4
5
6
7
8
GND
D03
D04
D05
D06
D07
CE1#
A10
OE#
A09
A08
A07
VCC
A06
A05
A04
A03
A02
Ground
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I3U
I1Z
I3U
I1Z
I1Z
I1Z
Power
I1Z
I1Z
I1Z
I1Z
I1Z
I1Z
I1Z
I1Z, OZ3
I1Z, OZ3
I1Z, OZ3
OT3
Ground
Ground
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I3U
Ground
I3U
I3U
I3U
OT1
1
2
3
4
5
6
7
8
GND
D03
D04
D05
D06
D07
CSO#
A102
ATA# SEL
A092
A082
A072
Ground
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I3Z
I1Z
I3U
I1Z
I1Z
I1Z
Power
I1Z
I1Z
I1Z
I1Z
I1Z
I1Z
I1Z
I1Z, OZ3
I1Z, OZ3
I1Z, OZ3
ON3
Ground
Ground
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z,OZ3
I1Z
Ground
I3Z
I3Z
I3U
OZ1
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
9
9
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
VCC
I
I
I
I
I
I
I
I
I
I
A062
I
I
I
1
I
A052
A042
A032
A02
A01
A00
D00
D01
D02
A01
A00
D00
D01
D02
WP
I
I
A01
A00
D00
D01
I
I
I
I
I/O
I/O
I/O
O
O
O
I/O
I/O
I/O
I/O
I/O
I
O
I
I
I
O
I/O
I/O
I/O
O
O
O
I/O
I/O
I/O
I/O
I/O
I
O
I
I
I
O
I/O
I/O
I/O
O
O
O
I/O
I/O
I/O
I/O
I/O
I
O
I
I
I
O
D02
IOIS16#
CD2#
CD1#
D111
IOIS16#
CD2#
CD1#
D111
CD2#
CD1#
D111
D121
D131
D141
D151
CE21#
VS1#
IORD#
IOWR#
WE#
RDY/BSY
VCC
CSEL#
VS2#
RESET
WAIT#
INPACK#
REG#
BVD2
D121
D131
D141
D151
CE21#
VS1#
IORD#
IOWR#
WE#
IREQ
VCC
CSEL#
VS2#
RESET
WAIT#
INPACK#
REG#
SPKR#
D121
D131
D141
D151
CS11#
VS1#
IORD#
IOWR#
WE3#
INTRQ
VCC
Power
I2Z
OPEN
I2Z
OT1
OT1
Power
I2Z
OPEN
I2Z
OT1
OT1
Power
I2U
OPEN
I2Z
ON1
OZ1
I
O
I
O
O
I
I
O
I
O
O
I
CSEL#
VS2#
RESET#
IORDY
INPACK#
REG3#
DASP#
I
O
I
O
O
I
I3U
I1U, OT1
I3U
I1U, OT1
I3U
I1U, ON1
I/O
I/O
I/O
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
3
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
PIN ASSIGNMENTS AND PIN TYPE (cont'd)
PC Card Memory Mode
PC Card I/O Mode
True IDE Mode4
Pin
Num
Signal
Name
Pin
Type
In ,Out
Type
Pin
Num
Signal
Name
Pin
Type
In ,Out
Type
Pin
Num
Signal
Pin
Type
In ,Out
Type
Name
PDIAG#
D081
D091
D101
46
47
48
49
50
BVD1
D081
D091
D101
GND
I/O
I/O
I/O
I/O
I1U, OT1
11Z, OZ3
11Z, OZ3
11Z, OZ3
Ground
46
47
48
49
50
STSCHG#
D081
D091
I/O
I/O
I/O
I/O
I1U, OT1
I1Z, OZ3
I1Z, OZ3
11Z, OZ3
Ground
46
47
48
49
50
I/O
I/O
I/O
I/O
I1U, ON1
I1Z, OZ3
I1Z, OZ3
I1Z, OZ3
Ground
D101
GND
GND
Notes :
1. These signals are required only for 16 bit access and not required when installed in 8 bit systems. Devices should allow for 3-state signals not to consume current.
2. Should be grounded by the host.
3. Should be tied to VCC by the host.
4. Optional for CE + Cards, Required for CompactFlash Storage Cards.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
4
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATING
Symbol
VCC
Parameter
Power supply
Rating
Units
V
-0.3 to 6.0
-0.3 to VCC+0.3
-0.3 to VCC+0.3
-40 to 125
VIN
Input voltage
V
VOUT
TSTG
Output voltage
Storage temperature
V
°C
DC CHARACTERISTICS:
I) Recommended Operating Conditions:
Symbol
Parameter
Min.
3.0
0
Max.
Units
VCC
VIN
Power supply
Input voltage
5.5
VCC
65
V
V
TOPR
Operating temperature
-20
°C
II) General DC Characteristics:
Symbol
IIL
Parameter
Conditions
no pull up/down
no pull up/down
Min
-1
-1
-10
4
Typ
Max
1
Units
μA
Input low current
IIH
Input high current
Tri-state leakage current
Input capacitance
Output capacitance
Bi-direction capacitance
1
μA
IOZ
10
pF
pF
pF
μA
CIN
COUT
CBID
4
4
III) DC Electrical Characteristics:
Symbol
VIL
Parameter
Min
Typ
Max
Units
V
Input low voltage
0.3VCC
VIH
Input high voltage
0.7VCC
V
VIL
Schmitt input low voltage
Schmitt input high voltage
Output low voltage
Output high voltage
Input pull up/down resistance
1.22
2.08
V
VIH
V
VOL
VOH
RI
0.4
1
V
2.3
V
75
kΩ
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
5
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
AC CHARACTERISTICS:
Attribute Memory Read Timing Specification
Attribute Memory access time is defined as 300ns. Detailed timing specs are shown in Table below.
300 ns
Speed Version
Item
Symbol
tc(R)
IEEE Symbol
tAVAV
Min ns.
Max ns.
Read Cycle Time
300
Address Access Time
ta(A)
tAVQV
300
300
150
100
100
Card Enable Access Time
Output Enable Access Time
Output Disable Time from CE
Output Disable Time from OE
Address Setup Time
ta(CE)
ta(OE)
tdis(CE)
tdis(OE)
tsu(A)
tELQV
tGLQV
tEHQZ
tGHQZ
tAVGL
30
5
Output Enable Time from CE
Output Enable Time from OE
Data Valid from Address Change
ten(CE)
ten(OE)
tv(A)
tELQNZ
tGLQNZ
tAXQX
5
0
Note: All times are in nanoseconds. Dout signifies data provided by the CompactFlash Storage Card or CF+ Card to the system.
The CE# signal or both the OE# signal and the WE# signal must be de-asserted between consecutive cycle operations.
Configuration Register (Attribute Memory) Write Timing Specification
The Card Configuration write access time is defined as 250ns. Detailed timing specifications are shown in Table below.
Speed Version
250 ns
Item
Symbol
tc(W)
IEEE Symbol
tAVAV
Min ns
250
150
30
Max ns
Write Cycle Time
Write Pulse Width
Address Setup Time
Write Recovery Time
Data Setup Time for WE
Data Hold Time
tw(WE)
tsu(A)
tWLWH
tAVWL
trec(WE)
tsu(D-WEH)
th(D)
tWMAX
30
tDVWH
80
tWMDX
30
Note: All times are in nanoseconds. Din signifies data provided by the system to the CompactFlash Storage Card or CF+ Card.
Common Memory Read Timing Specification
Item
Symbol
ta(OE)
IEEE Symbol
tGLQV
Min ns.
Max ns.
125
Output Enable Access Time
Output Disable Time from OE
Address Setup Time
Address Hold Time
tdis(OE)
tsu(A)
tGHQZ
100
tAVGL
30
20
0
th(A)
tGHAX
CE Setup before OE
CE Hold following OE
Wait Delay Falling from OE
Data Setup for Wait Release
Wait Width Time
tsu(CE)
th(CE)
tELGL
tGHEH
20
tv(WT-OE)
tv(WT)
tw(WT)
tGLWTV
tQVWTH
tWTLWTH
35
0
350 (3000 for CF+)
Note: The maximum load on -WAIT# is 1 LSTTL with 50pF total load. All times are in nanoseconds. Dout signifies data provided by the CompactFlash Storage Card or CF+ Card to
the system. The WAIT# signal may be ignored if the OE# cycle to cycle time is greater than the Wait Width time. The Max Wait Width time can be determined from the Card
Information Structure. The Wait Width time meets the PCMCIA specification of 12ps but is intentionally less in this specification.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
6
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
AC CHARACTERISTICS (cont'd):
I/O Input (Read) Timing Specification
Item
Symbol
td(IORD)
IEEE Symbol
tIGLQV
Min ns.
Max ns.
Data Delay after IORD
100
Data Hold following IORD
IORD Width Time
th(IORD)
tIGHQX
0
165
70
20
5
tw(IORD)
tIGLIGH
tAVIGL
Address Setup before IORD
Address Hold following IORD
CE Setup before IORD
tsuA(IORD)
thA(IORD)
tIGHAX
tsuCE(IORD)
thCE(IORD)
tsuREG(IORD)
thREG(IORD)
tdfINPACK(IORD)
tdrINPACK(IORD)
tdfIOIS16(ADR)
tdrIOIS16(ADR)
tdWT(IORD)
td(WT)
tELIGL
CE Hold following IORD
REG Setup before IORD
REG Hold following IORD
INPACK Delay Falling from IORD
INPACK Delay Rising from IORD
IOIS16 Delay Falling from Address
IOIS16 Delay Rising from Address
Wait Delay Falling from IORD
Data Delay from Wait Rising
Wait Width Time
tIGHEH
20
5
tRGLIGL
tIGHRGH
tIGLIAL
0
0
45
tIGHIAH
tAVISL
45
35
tAVISH
35
tIGLWTL
tWTHQV
tWTLWTH
35
0
tw(WT)
350 (3000 for CF+)
Note: Maximum load on WAIT#, INPACK# and I0IS16# is 1 LSTTL with 50pF total load. All times are in nanoseconds. Minimum time from WAIT# high to IORD# high is Onsec,
but minimum IORD# width must still be met. Dout signifies data provided by the CompactFlash Storage Card or CF+ Card to the system. Wait Width time meets PCMCIA
specification of 12ps but is intentionally less in this spec.
I/O Output (Write) Timing Specification
Item
Symbol
tsu(IOWR)
IEEE Symbol
tDVIWH
Min ns.
Max ns.
Data Setup before IOWR
Data Hold following IOWR
IOWR Width Time
60
30
165
70
20
5
th(IOWR)
tIWHDX
tw(IOWR)
tIWLIWH
tAVIWL
Address Setup before IOWR
Address Hold following IOWR
CE Setup before IOWR
CE Hold following IOWR
REG Setup before IOWR
REG Hold following IOWR
IOIS16 Delay Falling from Address
IOIS16 Delay Rising from Address
Wait Delay Falling from IOWR
IOWR high from Wait high
Wait Width Time
tsuA(IOWR)
thA(IOWR)
tIWHAX
tsuCE(IOWR)
thCE(IOWR)
tsuREG(IOWR)
thREG(IOWR)
tdfIOIS16(ADR)
tdrIOIS16(ADR)
tdWT(IOWR)
tdrIOWR(WT)
tw(WT)
tELIWL
tIWHEH
20
5
tRGLIWL
tIWHRGH
tAVISL
0
35
35
35
tAVISH
tIWLWTL
tWTJIWH
tWTLWTH
0
350 (3000for CF+)
Note: The maximum load on WAIT#, INPACK#, and I0IS16# is 1 LSTTL with 50pF total load. All times are in nanoseconds. Minimum time from WAIT# high to IOWR# high is Onsec,
but minimum IOWR# width must still be met. Din signifies data provided by the system to the CompactFlash Storage Card or CF+ Card. The Wait Width time meets the PCMCIA
specification of 12ps but is intentionally less in this specification.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
7
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
AC CHARACTERISTICS (cont'd):
True IDE Mode I/O Input (Read) Timing Specification
Item
Symbol
td(IORD)
IEEE Symbol
tIGLQV
Min ns.
Max ns.
Data Delay after IORD
Data Hold following IORD
IORD Width Time
100
th(IORD)
tIGHQX
tIGLIGH
tAVIGL
0
165
70
20
5
tw(IORD)
Address Setup before IORD
Address Hold following IORD
CE Setup before IORD
CE Hold following IORD
I0IS16 Delay Falling from Address
I0IS16 Delay Rising from Address
tsuA(IORD)
thA(IORD)
tIGHAX
tsuCE(IORD)
thCE(IORD)
tdfIOIS16(ADR)
tdrIOIS16(ADR)
tELIGL
tIGHEH
20
tAVISL
35
35
tAVISH
Note: The maximum load on -I0IS16 is 1 LSTTL with 50pF total load. All times are in nanoseconds. Minimum time from WAIT# high to IORD# high is 0 nsec, but minimum IORD# width
must still be met. Dout signifies data provided by the CompactFlash Storage Card or CF+ Card to the system.
True IDE Mode I/O Output (Write) Timing Specification
Item
Symbol
tsu(IOWR)
IEEE Symbol
tDVIWH
Min ns.
60
Max ns.
Data Setup before IOWR
Data Hold following IOWR
IOWR Width Time
th(IOWR)
tIWHDX
30
tw(IOWR)
tIWLIWH
tAVIWL
165
70
Address Setup before IOWR
Address Hold following IOWR
CE Setup before IOWR
CE Hold following IOWR
I0IS16 Delay Falling from Address
I0IS16 Delay Rising from Address
tsuA(IOWR)
thA(IOWR)
tIWHAX
20
tsuCE(IOWR)
thCE(IOWR)
tdfIOIS16(ADR)
tdrIOIS16(ADR)
tELIWL
5
tIWHEH
20
tAVISL
35
35
tAVISH
Note: The maximum load on -I0IS16 is 1 LSTTL with 50pF total load. All times are in nanoseconds. Minimum time from WAIT# high to IOWR# high is 0 nsec, but minimum IOWR#
width must still be met. Din signifies data provided by the system to the CompactFlash Storage Card or CF+ Card.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
8
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
PHYSICAL SPECIFICATIONS
Length:
36.40 ± 0.15mm (1.433 ± .006in.)
42.80 ± 0.10mm (1.685 ± .004in.)
3.3mm ± 0.10mm (.130 ± .004in)
Width:
Thickness (Including Label Area)
PACKAGE DIMENSIONS
Top View
1.60mm ± ±.05
(.063 in ± ± 002)
.99mm ± ±.05
(.039 in ±± 002)
50
25
26
1
2.44mm ± ±.07
(.096 in ± ± 003)
3.30mm ±± .10
(.130 in ± ± 004)
.01mm ± ±.07(.039 in ± ± 003) .01mm ± ±.07(.039 in ± ± 003)
Optional Configuration
(See Note)
2.15mm ± ±.07
(.085 in x .003)
0.76mm ± ±.07(0.30 in ± ± 003)
41.66mm ± ±.13(1.640 in ± ± 005)
42.80mm ± ±.10(1.685 in ± ± 004)
4xR 0.5mm± ±.1
(4xR.020 in ±± 004)
0.63mm ±± .07(.025 in ±± 003)
Note: The optional notched configuration was shown in the CF Specification Rev. 1.0. In specification Rev. 1.2, the notch was removed
for ease of tooling. This optional configuration can be used but it is not recommended.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
9
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
PART NUMBERING GUIDE
WED 7P xxx CFA 80 xx C 25
WEDC
Flash
Memory Size
Compact Flash
Commercial Flash
Housing:
00 = WEDC Logo
01 = Blank Housing
Commercial Temp
Speed
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
10
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
WED7PxxxCFA80xxC25
White Electronic Designs
Document Title
CompactFlash™ Card
Revision History
Rev #
History
Release Date Status
Rev 0
Initial Release
March 2005
Final
Rev 1
1.1 Added "ED" to part marking
July 2005
Final
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
July 2005
Rev. 1
11
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com
相关型号:
©2020 ICPDF网 联系我们和版权申明