SM16LC05-TR [MICROSEMI]

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 8 Element, Silicon, PLASTIC, SOP-16;
SM16LC05-TR
型号: SM16LC05-TR
厂家: Microsemi    Microsemi
描述:

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 8 Element, Silicon, PLASTIC, SOP-16

局域网 光电二极管
文件: 总2页 (文件大小:95K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SM16LC03 thru SM16LC24, e3  
TVS ArrayTM Series  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
This 16 pin 8-line Low Capacitance Unidirectional array is designed for use  
in applications where protection is required at the board level from voltage  
transients caused by electrostatic discharge (ESD) as defined in IEC 1000-  
4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of  
secondary lighting.  
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a  
peak power of 500 watts for an 8/20 μsec pulse and are designed to protect  
3.0/3.3 volt components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC,  
and low voltage interfaces up to 24 volts.  
SO-16  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
FEATURES  
APPLICATIONS / BENEFITS  
Low Capacitance Unidirectional TVS Array (8)  
Protects: DRAM’s, SRAM’s, CMOS, HCMOS, HSIC  
RS-232, RS-422, RS-423, RS-449 data rates: 10 Mbs  
WAN Equipment: Multiplexers, Routers, ISP,  
CSU/DSU  
Protects 3.0/3.3 up through 24 V Components  
Protects 8 lines Unidirectional  
Provides electrically isolated protection  
SO-16 Packaging  
RoHS Compliant devices available by adding “e3” suffix  
Multi-mode Transceiver Protection  
MAXIMUM RATINGS  
MECHANICAL AND PACKAGING  
Operating Temperatures: -550C to +1500C  
Storage Temperature: -550C to +1500C  
Peak Pulse Power: 500 Watts (8/20 μsec, Figure 1)  
Pulse Repetition Rate: <.01%  
Molded SO-16 Surface Mount  
Finish: Tin-Lead or RoHS Compliant matte-Tin  
plating solderable per MIL-STD-750, method 2026  
Weight: 0.128 grams (approximate)  
Body Marked with Logo, and device number  
Pin #1 defined by DOT on top of package  
Encapsulation meets UL 94V-0  
Tape & Reel EIA Standard 481-1-B  
Carrier tubes 48 pieces per (STANDARD)  
13 inch reel 2,500 pieces (OPTIONAL)  
ELECTRICAL CHARACTERISTICS @ 250C Unless otherwise specified  
BREAKDOWN  
VOLTAGE  
VBR  
CLAMPING  
VOLTAGE  
VC  
@ 1 Amp  
(FIGURE 2)  
VOLTS  
MAX  
CLAMPING  
VOLTAGE  
VC  
@ 5 Amp  
(FIGURE 2)  
VOLTS  
MAX  
REVERSE CAPACITANCETEMPERATURE  
STANDOFF  
VOLTAGE  
VWM  
CURRENT  
ID  
@ VWM  
(f=1 MHz)  
@0V  
C
COEFFICIENT  
OF VBR  
αV(BR)  
PART  
NUMBER  
DEVICE  
MARKING  
@1 mA  
VOLTS  
mV/°C  
MAX  
-5  
1
8
VOLTS  
MIN  
4
µA  
MAX  
200  
20  
1
pF  
TYP  
25  
25  
25  
MAX  
3.3  
5.0  
12  
SM16LC03  
SM16LC05  
SM16LC12  
SM16LC15  
SM16LC24  
MCA  
MCB  
MCC  
MCD  
MCE  
7.0  
9.8  
19  
9.0  
11  
24  
6
13.3  
16.7  
26.7  
15  
24  
30  
1
25  
11  
24  
43  
55  
1
25  
28  
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its standoff voltage VWM. Product selected voltage should be equal  
to or greater than the continuous peak operating voltage of the circuit to be protected.  
Application: The SM16LCXX product is designed for unidirectional transient voltage suppression protection of components at the board level. It is an  
ideal product to be used for protection of I/O Transceivers. See separate data sheet for bidirectional TVS in the SM16LCXXC series (with C suffix).  
Copyright © 2006  
Microsemi  
Page 1  
5-04 2006 REV P  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  
SM16LC03 thru SM16LC24, e3  
TVS ArrayTM Series  
S C O T T S D A L E D I V I S I O N  
GRAPHS  
100  
50  
0
Peak Value -- Ipp  
8 X 20 Waveform  
Ipp  
2
Half-Value --  
0
20  
30  
10  
t
t
d
t -- Time in microsec  
Td – PULSE TIME - μsec  
FIGURE 1  
FIGURE 2  
Pulse Wave Form  
Peak Pulse Power vs. Pulse Time  
DIMENSIONS AND SCHEMATIC  
Mounting Pad  
INCHES  
MIN  
MILLIMETERS  
DIM  
A
B
C
D
F
MAX  
0.398  
0.158  
0.069  
0.021  
0.050  
MIN  
9.09  
3.81  
1.35  
0.28  
0.41  
MAX  
10.10  
4.01  
1.75  
0.53  
1.27  
0.358  
0.150  
0.053  
0.011  
0.016  
G
J
K
L
P
0.050 BSC  
1.27 BSC  
0.006  
0.004  
0.189  
0.228  
0.010  
0.008  
0.206  
0.244  
0.15  
0.10  
4.80  
5.79  
0.25  
0.20  
5.23  
6.19  
Circuit Diagram  
Copyright © 2006  
5-04 2006 REV P  
Microsemi  
Page 2  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

相关型号:

SM16LC05C

TVSarray Series
MICROSEMI

SM16LC05C

500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRY
PROTEC

SM16LC05C-6

TVSarray Series
MICROSEMI

SM16LC05C-LF

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 16 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-16
PROTEC

SM16LC05C-LF-T13

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 16 Element, Silicon, SOP-16
PROTEC

SM16LC05C-T13

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 16 Element, Silicon, PLASTIC, SOP-16
PROTEC

SM16LC05C-T7

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 16 Element, Silicon, PLASTIC, SOP-16
PROTEC

SM16LC05C/TR13

Trans Voltage Suppressor Diode, 5V V(RWM), Bidirectional,
MICROSEMI

SM16LC05CE3

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 8 Element, Silicon, SOP-16
MICROSEMI

SM16LC05E3

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 8 Element, Silicon, ROHS COMPLIANT, PLASTIC, SOP-16
MICROSEMI

SM16LC08

500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRY
PROTEC

SM16LC08-LF

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Unidirectional, 8 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-16
PROTEC